IDEAS home Printed from https://ideas.repec.org/f/c/pmi702.html
   My authors  Follow this author

Stefan Minner

Citations

Many of the citations below have been collected in an experimental project, CitEc, where a more detailed citation analysis can be found. These are citations from works listed in RePEc that could be analyzed mechanically. So far, only a minority of all works could be analyzed. See under "Corrections" how you can help improve the citation analysis.

Working papers

  1. Zied Jemai & Chaaben Kouki & M Zied Babai & Stefan Minner & Zied Babai, 2016. "A coordinated multi-item inventory system for perishables with random lifetime," Post-Print hal-01672388, HAL.

    Cited by:

    1. Kouki, Chaaben & Babai, M. Zied & Minner, Stefan, 2018. "On the benefit of dual-sourcing in managing perishable inventory," International Journal of Production Economics, Elsevier, vol. 204(C), pages 1-17.
    2. Özgün Turgut & Florian Taube & Stefan Minner, 2018. "Data-driven retail inventory management with backroom effect," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 40(4), pages 945-968, October.
    3. Y. Barron, 2019. "A state-dependent perishability (s, S) inventory model with random batch demands," Annals of Operations Research, Springer, vol. 280(1), pages 65-98, September.
    4. Liu, Hengyu & Zhang, Juliang & Zhou, Chen & Ru, Yihong, 2018. "Optimal purchase and inventory retrieval policies for perishable seasonal agricultural products," Omega, Elsevier, vol. 79(C), pages 133-145.
    5. Zhang, Ren-Qian & Yi, Meng & Wang, Qi-Qi & Xiang, Chen, 2018. "Polynomial algorithm of inventory model with complete backordering and correlated demand caused by cross-selling," International Journal of Production Economics, Elsevier, vol. 199(C), pages 193-198.

  2. Teunter, R.H. & Inderfurth, K. & Minner, S. & Kleber, R., 2003. "Reverse logistics in a pharmaceutical company: a case study," Econometric Institute Research Papers EI 2003-30, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.

    Cited by:

    1. de Brito, M.P. & Flapper, S.D.P. & Dekker, R., 2002. "Reverse logistics," Econometric Institute Research Papers EI 2002-21, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    2. de Brito, M.P. & Dekker, R. & Flapper, S.D.P., 2003. "Reverse Logistics - a review of case studies," ERIM Report Series Research in Management ERS-2003-012-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    3. Inderfurth, K. & Teunter, R.H., 2001. "Production planning and control of closed-loop supply chains," Econometric Institute Research Papers EI 2001-39, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    4. Koppius, O.R. & Ozdemir, O. & van der Laan, E.A., 2011. "Beyond Waste Reduction: Creating Value with Information Systems in Closed-Loop Supply Chains," ERIM Report Series Research in Management ERS-2011-024-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.

Articles

  1. Fontaine, Pirmin & Minner, Stefan, 2018. "Benders decomposition for the Hazmat Transport Network Design Problem," European Journal of Operational Research, Elsevier, vol. 267(3), pages 996-1002.

    Cited by:

    1. Azad, Nader & Hassini, Elkafi, 2019. "Recovery strategies from major supply disruptions in single and multiple sourcing networks," European Journal of Operational Research, Elsevier, vol. 275(2), pages 481-501.
    2. Yan Sun & Xinya Li & Xia Liang & Cevin Zhang, 2019. "A Bi-Objective Fuzzy Credibilistic Chance-Constrained Programming Approach for the Hazardous Materials Road-Rail Multimodal Routing Problem under Uncertainty and Sustainability," Sustainability, MDPI, Open Access Journal, vol. 11(9), pages 1-27, May.

  2. de Kok, Ton & Grob, Christopher & Laumanns, Marco & Minner, Stefan & Rambau, Jörg & Schade, Konrad, 2018. "A typology and literature review on stochastic multi-echelon inventory models," European Journal of Operational Research, Elsevier, vol. 269(3), pages 955-983.

    Cited by:

    1. Van der Heide, G. & Buijs, P. & Roodbergen, K.J. & Vis, I.F.A., 2018. "Dynamic shipments of inventories in shared warehouse and transportation networks," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 118(C), pages 240-257.

  3. Özgün Turgut & Florian Taube & Stefan Minner, 2018. "Data-driven retail inventory management with backroom effect," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 40(4), pages 945-968, October.

    Cited by:

    1. Alexander Hübner & Pedro Amorim & Heinrich Kuhn & Stefan Minner & Tom Woensel, 2018. "Retail operations," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 40(4), pages 831-835, October.

  4. Minner, Stefan & Transchel, Sandra, 2017. "Order variability in perishable product supply chains," European Journal of Operational Research, Elsevier, vol. 260(1), pages 93-107.

    Cited by:

    1. José Roberto Díaz-Reza & Jorge Luis García-Alcaraz & Valeria Martínez-Loya & Liliana Avelar-Sosa & Emilio Jiménez-Macías & Julio Blanco-Fernández, 2018. "Impact of Infrastructure and Production Processes on Rioja Wine Supply Chain Performance," Sustainability, MDPI, Open Access Journal, vol. 10(1), pages 1-14, January.
    2. Shuai Yang & Yujie Xiao & Yong-Hong Kuo, 2017. "The Supply Chain Design for Perishable Food with Stochastic Demand," Sustainability, MDPI, Open Access Journal, vol. 9(7), pages 1-12, July.

  5. Mariel, Katharina & Minner, Stefan, 2017. "Benders decomposition for a strategic network design problem under NAFTA local content requirements," Omega, Elsevier, vol. 68(C), pages 62-75.

    Cited by:

    1. Hammad, Ahmed W A & Akbarnezhad, Ali & Rey, David, 2017. "Sustainable urban facility location: Minimising noise pollution and network congestion," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 107(C), pages 38-59.
    2. Bei, Xiaoqiang & Zhu, Xiaoyan & Coit, David W., 2019. "A risk-averse stochastic program for integrated system design and preventive maintenance planning," European Journal of Operational Research, Elsevier, vol. 276(2), pages 536-548.
    3. Guazzelli, Cauê Sauter & Cunha, Claudio B., 2018. "Exploring K-best solutions to enrich network design decision-making," Omega, Elsevier, vol. 78(C), pages 139-164.
    4. Zhang, Jian & Nault, Barrie R. & Dimitrakopoulos, Roussos G., 2019. "Optimizing a mineral value chain with market uncertainty using benders decomposition," European Journal of Operational Research, Elsevier, vol. 274(1), pages 227-239.

  6. Öner-Közen, Miray & Minner, Stefan, 2017. "Impact of priority sequencing decisions on on-time probability and expected tardiness of orders in make-to-order production systems with external due-dates," European Journal of Operational Research, Elsevier, vol. 263(2), pages 524-539.

    Cited by:

    1. Vanlerberghe, Jasper & Walraevens, Joris & Maertens, Tom & Bruneel, Herwig, 2018. "Calculation of the performance region of an easy-to-optimize alternative for Generalized Processor Sharing," European Journal of Operational Research, Elsevier, vol. 270(2), pages 625-635.

  7. Pirmin Fontaine & Stefan Minner, 2017. "A dynamic discrete network design problem for maintenance planning in traffic networks," Annals of Operations Research, Springer, vol. 253(2), pages 757-772, June.

    Cited by:

    1. Klavžar, Sandi & Azubha Jemilet, D. & Rajasingh, Indra & Manuel, Paul & Parthiban, N., 2018. "General Transmission Lemma and Wiener complexity of triangular grids," Applied Mathematics and Computation, Elsevier, vol. 338(C), pages 115-122.
    2. Fontaine, Pirmin & Minner, Stefan, 2018. "Benders decomposition for the Hazmat Transport Network Design Problem," European Journal of Operational Research, Elsevier, vol. 267(3), pages 996-1002.
    3. Wang, Guangmin & Gao, Ziyou & Xu, Meng, 2019. "Integrating link-based discrete credit charging scheme into discrete network design problem," European Journal of Operational Research, Elsevier, vol. 272(1), pages 176-187.

  8. Kouki, Chaaben & Babai, M. Zied & Jemai, Zied & Minner, Stefan, 2016. "A coordinated multi-item inventory system for perishables with random lifetime," International Journal of Production Economics, Elsevier, vol. 181(PA), pages 226-237.
    See citations under working paper version above.
  9. Silbermayr, Lena & Minner, Stefan, 2016. "Dual sourcing under disruption risk and cost improvement through learning," European Journal of Operational Research, Elsevier, vol. 250(1), pages 226-238.

    Cited by:

    1. Wu, Junjian & Wang, Haiyan & Shang, Jennifer, 2019. "Multi-sourcing and information sharing under competition and supply uncertainty," European Journal of Operational Research, Elsevier, vol. 278(2), pages 658-671.
    2. Liu, Shan & Wang, Lin & Huang, Wei (Wayne), 2017. "Effects of process and outcome controls on business process outsourcing performance: Moderating roles of vendor and client capability risks," European Journal of Operational Research, Elsevier, vol. 260(3), pages 1115-1128.
    3. Li, Shanshan & He, Yong & Chen, Lujie, 2017. "Dynamic strategies for supply disruptions in production-inventory systems," International Journal of Production Economics, Elsevier, vol. 194(C), pages 88-101.
    4. Awasthy, Prakash & Hazra, Jishnu, 2019. "Responsible sourcing by improving workplace safety through buyer–supplier collaboration," European Journal of Operational Research, Elsevier, vol. 274(1), pages 155-164.
    5. Li, Bo & Arreola-Risa, Antonio, 2017. "Financial risk, inventory decision and process improvement for a firm with random capacity," European Journal of Operational Research, Elsevier, vol. 260(1), pages 183-194.
    6. Jain, Tarun & Hazra, Jishnu & Cheng, T.C.E., 2018. "Sourcing under overconfident buyer and suppliers," International Journal of Production Economics, Elsevier, vol. 206(C), pages 93-109.
    7. Yu, Xinning & Lan, Yanfei & Zhao, Ruiqing, 2018. "Cooperation royalty contract design in research and development alliances: Help vs. knowledge-sharing," European Journal of Operational Research, Elsevier, vol. 268(2), pages 740-754.
    8. Zheng Liu & Qi Xu & Kun Yang, 2018. "Optimal Independent Pricing Strategies of Dual-Channel Supply Chain Based on Risk-Aversion Attitudes," Asia-Pacific Journal of Operational Research (APJOR), World Scientific Publishing Co. Pte. Ltd., vol. 35(02), pages 1-17, April.
    9. Lan, Yongquan & Li, Yanzhi & Papier, Felix, 2018. "Competition and coordination in a three-tier supply chain with differentiated channels," European Journal of Operational Research, Elsevier, vol. 269(3), pages 870-882.
    10. Shi, Xiutian & Shen, Bin, 2019. "Product upgrading or not: R&D tax credit, consumer switch and information updating," International Journal of Production Economics, Elsevier, vol. 213(C), pages 13-22.

  10. Haijema, René & Minner, Stefan, 2016. "Stock-level dependent ordering of perishables: A comparison of hybrid base-stock and constant order policies," International Journal of Production Economics, Elsevier, vol. 181(PA), pages 215-225.

    Cited by:

    1. Kouki, Chaaben & Babai, M. Zied & Minner, Stefan, 2018. "On the benefit of dual-sourcing in managing perishable inventory," International Journal of Production Economics, Elsevier, vol. 204(C), pages 1-17.
    2. Broekmeulen, Rob A.C.M. & van Donselaar, Karel H., 2019. "Quantifying the potential to improve on food waste, freshness and sales for perishables in supermarkets," International Journal of Production Economics, Elsevier, vol. 209(C), pages 265-273.
    3. Haijema, René & Minner, Stefan, 2019. "Improved ordering of perishables: The value of stock-age information," International Journal of Production Economics, Elsevier, vol. 209(C), pages 316-324.
    4. Mou, Shandong & Robb, David J. & DeHoratius, Nicole, 2018. "Retail store operations: Literature review and research directions," European Journal of Operational Research, Elsevier, vol. 265(2), pages 399-422.

  11. Jörn Grahl & Stefan Minner & Daniel Dittmar, 2016. "Meta-heuristics for placing strategic safety stock in multi-echelon inventory with differentiated service times," Annals of Operations Research, Springer, vol. 242(2), pages 489-504, July.

    Cited by:

    1. de Kok, Ton & Grob, Christopher & Laumanns, Marco & Minner, Stefan & Rambau, Jörg & Schade, Konrad, 2018. "A typology and literature review on stochastic multi-echelon inventory models," European Journal of Operational Research, Elsevier, vol. 269(3), pages 955-983.
    2. Schuster Puga, Matías & Minner, Stefan & Tancrez, Jean-Sébastien, 2019. "Two-stage supply chain design with safety stock placement decisions," International Journal of Production Economics, Elsevier, vol. 209(C), pages 183-193.
    3. Dali Jiang & Haitao Li & Tinghong Yang & De Li, 2016. "Genetic algorithm for inventory positioning problem with general acyclic supply chain networks," European Journal of Industrial Engineering, Inderscience Enterprises Ltd, vol. 10(3), pages 367-384.
    4. Kannan Govindan, 2016. "Evolutionary algorithms for supply chain management," Annals of Operations Research, Springer, vol. 242(2), pages 195-206, July.

  12. Budde, Maximilian & Minner, Stefan, 2015. "Optimal capacity provision for service providers with subsequent auctioning of projects," International Journal of Production Economics, Elsevier, vol. 170(PB), pages 652-662.

    Cited by:

    1. Yang, Huixiao & Luo, Jianwen & Wang, Haijun, 2017. "The role of revenue sharing and first-mover advantage in emission abatement with carbon tax and consumer environmental awareness," International Journal of Production Economics, Elsevier, vol. 193(C), pages 691-702.
    2. Zhang, Juliang & Xiang, Jie & Cheng, T.C. Edwin & Hua, Guowei & Chen, Cheng, 2019. "An optimal efficient multi-attribute auction for transportation procurement with carriers having multi-unit supplies," Omega, Elsevier, vol. 83(C), pages 249-260.

  13. Mariel, Katharina & Minner, Stefan, 2015. "Strategic capacity planning in automotive production networks under duties and duty drawbacks," International Journal of Production Economics, Elsevier, vol. 170(PB), pages 687-700.

    Cited by:

    1. Mariel, Katharina & Minner, Stefan, 2017. "Benders decomposition for a strategic network design problem under NAFTA local content requirements," Omega, Elsevier, vol. 68(C), pages 62-75.
    2. Kozjek, Dominik & Vrabič, Rok & Eržen, Gregor & Butala, Peter, 2018. "Identifying the business and social networks in the domain of production by merging the data from heterogeneous internet sources," International Journal of Production Economics, Elsevier, vol. 200(C), pages 181-191.
    3. Jakubovskis, Aldis, 2017. "Flexible production resources and capacity utilization rates: A robust optimization perspective," International Journal of Production Economics, Elsevier, vol. 189(C), pages 77-85.

  14. Kouki, Chaaben & Jemaï, Zied & Minner, Stefan, 2015. "A lost sales (r, Q) inventory control model for perishables with fixed lifetime and lead time," International Journal of Production Economics, Elsevier, vol. 168(C), pages 143-157.

    Cited by:

    1. Janssen, Larissa & Claus, Thorsten & Sauer, Jürgen, 2016. "Literature review of deteriorating inventory models by key topics from 2012 to 2015," International Journal of Production Economics, Elsevier, vol. 182(C), pages 86-112.
    2. Broekmeulen, Rob A.C.M. & van Donselaar, Karel H., 2019. "Quantifying the potential to improve on food waste, freshness and sales for perishables in supermarkets," International Journal of Production Economics, Elsevier, vol. 209(C), pages 265-273.
    3. Wu, Zhengping & Zhai, Xin & Liu, Zhongyi, 2015. "The inventory billboard effect on the lead-time decision," International Journal of Production Economics, Elsevier, vol. 170(PA), pages 45-53.
    4. Mou, Shandong & Robb, David J. & DeHoratius, Nicole, 2018. "Retail store operations: Literature review and research directions," European Journal of Operational Research, Elsevier, vol. 265(2), pages 399-422.

  15. Altendorfer, Klaus & Minner, Stefan, 2015. "Influence of order acceptance policies on optimal capacity investment with stochastic customer required lead times," European Journal of Operational Research, Elsevier, vol. 243(2), pages 555-565.

    Cited by:

    1. Altendorfer, Klaus, 2017. "Relation between lead time dependent demand and capacity flexibility in a two-stage supply chain with lost sales," International Journal of Production Economics, Elsevier, vol. 194(C), pages 13-24.
    2. Hanukov, Gabi & Avinadav, Tal & Chernonog, Tatyana & Yechiali, Uri, 2019. "Performance improvement of a service system via stocking perishable preliminary services," European Journal of Operational Research, Elsevier, vol. 274(3), pages 1000-1011.

  16. Araneda-Fuentes, Cristina & Lustosa, Leonardo Junqueira & Minner, Stefan, 2015. "A contract for coordinating capacity decisions in a business-to-business (B2B) supply chain," International Journal of Production Economics, Elsevier, vol. 165(C), pages 158-171.

    Cited by:

    1. Cheaitou, Ali & Cheaytou, Rima, 2019. "A two-stage capacity reservation supply contract with risky supplier and forecast updating," International Journal of Production Economics, Elsevier, vol. 209(C), pages 42-60.
    2. Shafiq, Muhammad & Savino, Matteo M., 2019. "Supply chain coordination to optimize manufacturer's capacity procurement decisions through a new commitment-based model with penalty and revenue-sharing," International Journal of Production Economics, Elsevier, vol. 208(C), pages 512-528.

  17. Löhndorf, Nils & Riel, Manuel & Minner, Stefan, 2014. "Simulation optimization for the stochastic economic lot scheduling problem with sequence-dependent setup times," International Journal of Production Economics, Elsevier, vol. 157(C), pages 170-176.

    Cited by:

    1. Jana, R.K. & Mitra, Subrata K. & Sharma, Dinesh K., 2018. "Software vendors travel management decisions using an elitist nonhomogeneous genetic algorithm," International Journal of Production Economics, Elsevier, vol. 202(C), pages 123-131.
    2. Liou, Cheng-Dar & Hsieh, Yi-Chih, 2015. "A hybrid algorithm for the multi-stage flow shop group scheduling with sequence-dependent setup and transportation times," International Journal of Production Economics, Elsevier, vol. 170(PA), pages 258-267.

  18. Steffen T. Klosterhalfen & Stefan Minner & Sean P. Willems, 2014. "Strategic Safety Stock Placement in Supply Networks with Static Dual Supply," Manufacturing & Service Operations Management, INFORMS, vol. 16(2), pages 204-219, May.

    Cited by:

    1. de Kok, Ton & Grob, Christopher & Laumanns, Marco & Minner, Stefan & Rambau, Jörg & Schade, Konrad, 2018. "A typology and literature review on stochastic multi-echelon inventory models," European Journal of Operational Research, Elsevier, vol. 269(3), pages 955-983.
    2. Grace Hua, N. & Willems, Sean P., 2016. "Analytical insights into two-stage serial line supply chain safety stock," International Journal of Production Economics, Elsevier, vol. 181(PA), pages 107-112.
    3. Stephen C. Graves & Tor Schoenmeyr, 2016. "Strategic Safety-Stock Placement in Supply Chains with Capacity Constraints," Manufacturing & Service Operations Management, INFORMS, vol. 18(3), pages 445-460, July.
    4. Amiri-Aref, Mehdi & Klibi, Walid & Babai, M. Zied, 2018. "The multi-sourcing location inventory problem with stochastic demand," European Journal of Operational Research, Elsevier, vol. 266(1), pages 72-87.

  19. Sachs, Anna-Lena & Minner, Stefan, 2014. "The data-driven newsvendor with censored demand observations," International Journal of Production Economics, Elsevier, vol. 149(C), pages 28-36.

    Cited by:

    1. Janssen, Larissa & Claus, Thorsten & Sauer, Jürgen, 2016. "Literature review of deteriorating inventory models by key topics from 2012 to 2015," International Journal of Production Economics, Elsevier, vol. 182(C), pages 86-112.
    2. Özgün Turgut & Florian Taube & Stefan Minner, 2018. "Data-driven retail inventory management with backroom effect," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 40(4), pages 945-968, October.
    3. Huber, Jakob & Müller, Sebastian & Fleischmann, Moritz & Stuckenschmidt, Heiner, 2019. "A data-driven newsvendor problem: From data to decision," European Journal of Operational Research, Elsevier, vol. 278(3), pages 904-915.
    4. Albiński, Szymon & Fontaine, Pirmin & Minner, Stefan, 2018. "Performance analysis of a hybrid bike sharing system: A service-level-based approach under censored demand observations," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 116(C), pages 59-69.
    5. Mou, Shandong & Robb, David J. & DeHoratius, Nicole, 2018. "Retail store operations: Literature review and research directions," European Journal of Operational Research, Elsevier, vol. 265(2), pages 399-422.

  20. Klaus Altendorfer & Stefan Minner, 2014. "A comparison of make-to-stock and make-to-order in multi-product manufacturing systems with variable due dates," IISE Transactions, Taylor & Francis Journals, vol. 46(3), pages 197-212.

    Cited by:

    1. Agra, Agostinho & Poss, Michael & Santos, Micael, 2018. "Optimizing make-to-stock policies through a robust lot-sizing model," International Journal of Production Economics, Elsevier, vol. 200(C), pages 302-310.
    2. Lu, Qihui & Chen, Xiangfeng, 2018. "Capacity expansion investment of supplier under make-to-order and make-to-stock supply chains," International Journal of Production Economics, Elsevier, vol. 198(C), pages 133-148.

  21. Fontaine, Pirmin & Minner, Stefan, 2014. "Benders Decomposition for Discrete–Continuous Linear Bilevel Problems with application to traffic network design," Transportation Research Part B: Methodological, Elsevier, vol. 70(C), pages 163-172.

    Cited by:

    1. Liu, Haoxiang & Wang, David Z.W., 2015. "Global optimization method for network design problem with stochastic user equilibrium," Transportation Research Part B: Methodological, Elsevier, vol. 72(C), pages 20-39.
    2. Hammad, Ahmed W A & Akbarnezhad, Ali & Rey, David, 2017. "Sustainable urban facility location: Minimising noise pollution and network congestion," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 107(C), pages 38-59.
    3. Wang, David Z.W. & Liu, Haoxiang & Szeto, W.Y., 2015. "A novel discrete network design problem formulation and its global optimization solution algorithm," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 79(C), pages 213-230.
    4. Mohebifard, Rasool & Hajbabaie, Ali, 2019. "Optimal network-level traffic signal control: A benders decomposition-based solution algorithm," Transportation Research Part B: Methodological, Elsevier, vol. 121(C), pages 252-274.
    5. Tan, Zhijia & Yang, Hai & Tan, Wei & Li, Zhichun, 2016. "Pareto-improving transportation network design and ownership regimes," Transportation Research Part B: Methodological, Elsevier, vol. 91(C), pages 292-309.
    6. Hong Zheng & Xiaozheng He & Yongfu Li & Srinivas Peeta, 2017. "Traffic Equilibrium and Charging Facility Locations for Electric Vehicles," Networks and Spatial Economics, Springer, vol. 17(2), pages 435-457, June.
    7. Fontaine, Pirmin & Minner, Stefan, 2018. "Benders decomposition for the Hazmat Transport Network Design Problem," European Journal of Operational Research, Elsevier, vol. 267(3), pages 996-1002.
    8. Wang, Guangmin & Gao, Ziyou & Xu, Meng, 2019. "Integrating link-based discrete credit charging scheme into discrete network design problem," European Journal of Operational Research, Elsevier, vol. 272(1), pages 176-187.
    9. Rahmaniani, Ragheb & Crainic, Teodor Gabriel & Gendreau, Michel & Rei, Walter, 2017. "The Benders decomposition algorithm: A literature review," European Journal of Operational Research, Elsevier, vol. 259(3), pages 801-817.
    10. Arslan, Okan & Karaşan, Oya Ekin, 2016. "A Benders decomposition approach for the charging station location problem with plug-in hybrid electric vehicles," Transportation Research Part B: Methodological, Elsevier, vol. 93(PA), pages 670-695.
    11. Chen, Jingxu & Jia, Shuai & Wang, Shuaian & Liu, Zhiyuan, 2018. "Subloop-based reversal of port rotation directions for container liner shipping network alteration," Transportation Research Part B: Methodological, Elsevier, vol. 118(C), pages 336-361.
    12. Pirmin Fontaine & Stefan Minner, 2017. "A dynamic discrete network design problem for maintenance planning in traffic networks," Annals of Operations Research, Springer, vol. 253(2), pages 757-772, June.

  22. Budde, Maximilian & Minner, Stefan, 2014. "First- and second-price sealed-bid auctions applied to push and pull supply contracts," European Journal of Operational Research, Elsevier, vol. 237(1), pages 370-382.

    Cited by:

    1. Fuqiang Lu & Yanli Hu & Hualing Bi & Min Huang & Meng Zhao, 2018. "An Auction Approach for Cost and Schedule Management of IT Outsourcing Project," Asia-Pacific Journal of Operational Research (APJOR), World Scientific Publishing Co. Pte. Ltd., vol. 35(05), pages 1-23, October.
    2. Basu, Arnab & Jain, Tarun & Hazra, Jishnu, 2018. "Supplier selection under production learning and process improvements," International Journal of Production Economics, Elsevier, vol. 204(C), pages 411-420.
    3. Jain, Tarun & Hazra, Jishnu & Cheng, T.C.E., 2018. "Sourcing under overconfident buyer and suppliers," International Journal of Production Economics, Elsevier, vol. 206(C), pages 93-109.
    4. Lorentziadis, Panos L., 2016. "Optimal bidding in auctions from a game theory perspective," European Journal of Operational Research, Elsevier, vol. 248(2), pages 347-371.
    5. Wang, Chao & Guo, Peijun, 2017. "Behavioral models for first-price sealed-bid auctions with the one-shot decision theory," European Journal of Operational Research, Elsevier, vol. 261(3), pages 994-1000.

  23. Silbermayr, Lena & Minner, Stefan, 2014. "A multiple sourcing inventory model under disruption risk," International Journal of Production Economics, Elsevier, vol. 149(C), pages 37-46.

    Cited by:

    1. Li, Shanshan & He, Yong & Chen, Lujie, 2017. "Dynamic strategies for supply disruptions in production-inventory systems," International Journal of Production Economics, Elsevier, vol. 194(C), pages 88-101.
    2. Faiza Hamdi & Ahmed Ghorbel & Faouzi Masmoudi & Lionel Dupont, 2018. "Optimization of a supply portfolio in the context of supply chain risk management: literature review," Journal of Intelligent Manufacturing, Springer, vol. 29(4), pages 763-788, April.
    3. Ledwoch, Anna & Yasarcan, Hakan & Brintrup, Alexandra, 2018. "The moderating impact of supply network topology on the effectiveness of risk management," International Journal of Production Economics, Elsevier, vol. 197(C), pages 13-26.
    4. Ray, Pritee & Jenamani, Mamata, 2016. "Mean-variance analysis of sourcing decision under disruption risk," European Journal of Operational Research, Elsevier, vol. 250(2), pages 679-689.
    5. Ashkan Mohsenzadeh Ledari & Seyed Hamid Reza Pasandideh & Mehrdad Nouri Koupaei, 2018. "A new newsvendor policy model for dual-sourcing supply chains by considering disruption risk and special order," Journal of Intelligent Manufacturing, Springer, vol. 29(1), pages 237-244, January.
    6. Lee, Chungseung & Park, Kun Soo, 2016. "Inventory and transshipment decisions in the rationing game under capacity uncertainty," Omega, Elsevier, vol. 65(C), pages 82-97.
    7. Snyder, Lawrence V., 2014. "A tight approximation for an EOQ model with supply disruptions," International Journal of Production Economics, Elsevier, vol. 155(C), pages 91-108.
    8. Chao Fang & Xiangxiang Liao & Min Xie, 2016. "A hybrid risks-informed approach for the selection of supplier portfolio," International Journal of Production Research, Taylor & Francis Journals, vol. 54(7), pages 2019-2034, April.
    9. Jain, Tarun & Hazra, Jishnu & Cheng, T.C.E., 2018. "Sourcing under overconfident buyer and suppliers," International Journal of Production Economics, Elsevier, vol. 206(C), pages 93-109.
    10. Alikhani, Reza & Torabi, S. Ali & Altay, Nezih, 2019. "Strategic supplier selection under sustainability and risk criteria," International Journal of Production Economics, Elsevier, vol. 208(C), pages 69-82.
    11. Fianu, Sefakor & Davis, Lauren B., 2018. "A Markov decision process model for equitable distribution of supplies under uncertainty," European Journal of Operational Research, Elsevier, vol. 264(3), pages 1101-1115.
    12. Sanjoy Kumar Paul & Ruhul Sarker & Daryl Essam & Paul Tae-Woo Lee, 2019. "A mathematical modelling approach for managing sudden disturbances in a three-tier manufacturing supply chain," Annals of Operations Research, Springer, vol. 280(1), pages 299-335, September.
    13. Ashkan Mohsenzadeh Ledari & Seyed Hamid Reza Pasandideh & Mehrdad Nouri Koupaei, 0. "A new newsvendor policy model for dual-sourcing supply chains by considering disruption risk and special order," Journal of Intelligent Manufacturing, Springer, vol. 0, pages 1-8.
    14. Lücker, Florian & Seifert, Ralf W., 2017. "Building up Resilience in a Pharmaceutical Supply Chain through Inventory, Dual Sourcing and Agility Capacity," Omega, Elsevier, vol. 73(C), pages 114-124.
    15. Amorim, Pedro & Curcio, Eduardo & Almada-Lobo, Bernardo & Barbosa-Póvoa, Ana P.F.D. & Grossmann, Ignacio E., 2016. "Supplier selection in the processed food industry under uncertainty," European Journal of Operational Research, Elsevier, vol. 252(3), pages 801-814.

  24. Nils Löhndorf & David Wozabal & Stefan Minner, 2013. "Optimizing Trading Decisions for Hydro Storage Systems Using Approximate Dual Dynamic Programming," Operations Research, INFORMS, vol. 61(4), pages 810-823, August.

    Cited by:

    1. Cruise, James R. & Flatley, Lisa & Zachary, Stan, 2018. "Impact of storage competition on energy markets," European Journal of Operational Research, Elsevier, vol. 269(3), pages 998-1012.
    2. Daniel R. Jiang & Warren B. Powell, 2015. "Optimal Hour-Ahead Bidding in the Real-Time Electricity Market with Battery Storage Using Approximate Dynamic Programming," INFORMS Journal on Computing, INFORMS, vol. 27(3), pages 525-543, August.
    3. Simone Farinelli & Luisa Tibiletti, 2015. "Hydroassets Portfolio Management for Intraday Electricity Trading from a Discrete Time Stochastic Optimization Perspective," Papers 1508.05837, arXiv.org, revised Aug 2017.
    4. Luckny Zéphyr & C. Lindsay Anderson, 2018. "Stochastic dynamic programming approach to managing power system uncertainty with distributed storage," Computational Management Science, Springer, vol. 15(1), pages 87-110, January.
    5. Ciara O'Dwyer & L. (Lisa B.) Ryan & Damian Flynn, 2017. "Efficient large-scale energy storage dispatch: challenges in future high renewables systems," Open Access publications 10197/9103, School of Economics, University College Dublin.
    6. Jochen Gönsch & Michael Hassler, 2016. "Sell or store? An ADP approach to marketing renewable energy," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 38(3), pages 633-660, July.
    7. Weitzel, Timm & Glock, Christoph H., 2018. "Energy management for stationary electric energy storage systems: A systematic literature review," European Journal of Operational Research, Elsevier, vol. 264(2), pages 582-606.
    8. Jitka Dupačová & Václav Kozmík, 2017. "SDDP for multistage stochastic programs: preprocessing via scenario reduction," Computational Management Science, Springer, vol. 14(1), pages 67-80, January.

  25. Klosterhalfen, Steffen T. & Dittmar, Daniel & Minner, Stefan, 2013. "An integrated guaranteed- and stochastic-service approach to inventory optimization in supply chains," European Journal of Operational Research, Elsevier, vol. 231(1), pages 109-119.

    Cited by:

    1. de Kok, Ton & Grob, Christopher & Laumanns, Marco & Minner, Stefan & Rambau, Jörg & Schade, Konrad, 2018. "A typology and literature review on stochastic multi-echelon inventory models," European Journal of Operational Research, Elsevier, vol. 269(3), pages 955-983.
    2. Zahraei, Seyed Mehdi & Teo, Chee-Chong, 2018. "Optimizing a recover-and-assemble remanufacturing system with production smoothing," International Journal of Production Economics, Elsevier, vol. 197(C), pages 330-341.
    3. Jörn Grahl & Stefan Minner & Daniel Dittmar, 2016. "Meta-heuristics for placing strategic safety stock in multi-echelon inventory with differentiated service times," Annals of Operations Research, Springer, vol. 242(2), pages 489-504, July.
    4. Wang, Yulan & Wallace, Stein W. & Shen, Bin & Choi, Tsan-Ming, 2015. "Service supply chain management: A review of operational models," European Journal of Operational Research, Elsevier, vol. 247(3), pages 685-698.
    5. Eruguz, Ayse Sena & Sahin, Evren & Jemai, Zied & Dallery, Yves, 2016. "A comprehensive survey of guaranteed-service models for multi-echelon inventory optimization," International Journal of Production Economics, Elsevier, vol. 172(C), pages 110-125.

  26. Seidscher, Arkadi & Minner, Stefan, 2013. "A Semi-Markov decision problem for proactive and reactive transshipments between multiple warehouses," European Journal of Operational Research, Elsevier, vol. 230(1), pages 42-52.

    Cited by:

    1. Dilupa Nakandala & Henry Lau & Paul K.C. Shum, 2017. "A lateral transshipment model for perishable inventory management," International Journal of Production Research, Taylor & Francis Journals, vol. 55(18), pages 5341-5354, September.
    2. Joern Meissner & Olga Rusyaeva, 2015. "Approximate Dynamic Programming for lateral transshipment problems in multi-location inventory systems," Working Papers MRG/0025, Department of Logistics, Kuehne Logistics University, revised Mar 2016.
    3. Bhatnagar, Rohit & Lin, Bing, 2019. "The joint transshipment and production control policies for multi-location production/inventory systems," European Journal of Operational Research, Elsevier, vol. 275(3), pages 957-970.
    4. Dimitrov, Nedialko B. & Dimitrov, Stanko & Chukova, Stefanka, 2014. "Robust decomposable Markov decision processes motivated by allocating school budgets," European Journal of Operational Research, Elsevier, vol. 239(1), pages 199-213.
    5. LI, Li, 2019. "Cooperative purchasing and preactive inventory sharing – Channel balancing and performance improvement," European Journal of Operational Research, Elsevier, vol. 278(3), pages 738-751.
    6. Zümbül Atan & Lawrence V. Snyder & George R. Wilson, 2018. "Transshipment policies for systems with multiple retailers and two demand classes," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 40(1), pages 159-186, January.

  27. S M H Molana & H Davoudpour & S Minner, 2012. "An (r, nQ) inventory model for packaged deteriorating products with compound Poisson demand," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 63(11), pages 1499-1507, November.

    Cited by:

    1. Janssen, Larissa & Claus, Thorsten & Sauer, Jürgen, 2016. "Literature review of deteriorating inventory models by key topics from 2012 to 2015," International Journal of Production Economics, Elsevier, vol. 182(C), pages 86-112.

  28. Beutel, Anna-Lena & Minner, Stefan, 2012. "Safety stock planning under causal demand forecasting," International Journal of Production Economics, Elsevier, vol. 140(2), pages 637-645.

    Cited by:

    1. Prak, Dennis & Teunter, Ruud & Syntetos, Aris, 2017. "On the calculation of safety stocks when demand is forecasted," European Journal of Operational Research, Elsevier, vol. 256(2), pages 454-461.
    2. Trapero, Juan R. & Cardós, Manuel & Kourentzes, Nikolaos, 2019. "Empirical safety stock estimation based on kernel and GARCH models," Omega, Elsevier, vol. 84(C), pages 199-211.
    3. Hong, Paul & Jagani, Sandeep & Kim, Jinhwan & Youn, Sun Hee, 2019. "Managing sustainability orientation: An empirical investigation of manufacturing firms," International Journal of Production Economics, Elsevier, vol. 211(C), pages 71-81.
    4. Ata Allah Taleizadeh, 2017. "Stochastic Multi-Objectives Supply Chain Optimization with Forecasting Partial Backordering Rate: A Novel Hybrid Method of Meta Goal Programming and Evolutionary Algorithms," Asia-Pacific Journal of Operational Research (APJOR), World Scientific Publishing Co. Pte. Ltd., vol. 34(04), pages 1-28, August.
    5. Wang, Gang & Gunasekaran, Angappa & Ngai, Eric W.T. & Papadopoulos, Thanos, 2016. "Big data analytics in logistics and supply chain management: Certain investigations for research and applications," International Journal of Production Economics, Elsevier, vol. 176(C), pages 98-110.
    6. Özgün Turgut & Florian Taube & Stefan Minner, 2018. "Data-driven retail inventory management with backroom effect," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 40(4), pages 945-968, October.
    7. Puchalsky, Weslly & Ribeiro, Gabriel Trierweiler & da Veiga, Claudimar Pereira & Freire, Roberto Zanetti & Santos Coelho, Leandro dos, 2018. "Agribusiness time series forecasting using Wavelet neural networks and metaheuristic optimization: An analysis of the soybean sack price and perishable products demand," International Journal of Production Economics, Elsevier, vol. 203(C), pages 174-189.
    8. Huber, Jakob & Müller, Sebastian & Fleischmann, Moritz & Stuckenschmidt, Heiner, 2019. "A data-driven newsvendor problem: From data to decision," European Journal of Operational Research, Elsevier, vol. 278(3), pages 904-915.
    9. Trapero, Juan R. & Cardós, Manuel & Kourentzes, Nikolaos, 2019. "Quantile forecast optimal combination to enhance safety stock estimation," International Journal of Forecasting, Elsevier, vol. 35(1), pages 239-250.
    10. Lin, Chin-Sen & Su, Chao-Ton, 2013. "The Taiwan national quality award and market value of the firms: An empirical study," International Journal of Production Economics, Elsevier, vol. 144(1), pages 57-67.
    11. Halkos, George & Kevork, Ilias, 2012. "Unbiased estimation of maximum expected profits in the Newsvendor Model: a case study analysis," MPRA Paper 40724, University Library of Munich, Germany.
    12. Prak, Dennis & Teunter, Ruud, 2019. "A general method for addressing forecasting uncertainty in inventory models," International Journal of Forecasting, Elsevier, vol. 35(1), pages 224-238.
    13. Nikolai Stein & Jan Meller & Christoph M. Flath, 2018. "Big data on the shop-floor: sensor-based decision-support for manual processes," Journal of Business Economics, Springer, vol. 88(5), pages 593-616, July.
    14. Abbasi, B. & Hosseinifard, Z. & Alamri, O. & Thomas, D. & Minas, J.P., 2018. "Finite time horizon fill rate analysis for multiple customer cases," Omega, Elsevier, vol. 76(C), pages 1-17.
    15. Bin Shen & Hau-Ling Chan, 2017. "Forecast Information Sharing for Managing Supply Chains in the Big Data Era: Recent Development and Future Research," Asia-Pacific Journal of Operational Research (APJOR), World Scientific Publishing Co. Pte. Ltd., vol. 34(01), pages 1-26, February.
    16. Van der Auweraer, Sarah & Boute, Robert N. & Syntetos, Aris A., 2019. "Forecasting spare part demand with installed base information: A review," International Journal of Forecasting, Elsevier, vol. 35(1), pages 181-196.
    17. Rafiei, Rezvan & Nourelfath, Mustapha & Gaudreault, Jonathan & De Santa-Eulalia, Luis Antonio & Bouchard, Mathieu, 2015. "Dynamic safety stock in co-production demand-driven wood remanufacturing mills: A case study," International Journal of Production Economics, Elsevier, vol. 165(C), pages 90-99.
    18. Sachs, Anna-Lena & Minner, Stefan, 2014. "The data-driven newsvendor with censored demand observations," International Journal of Production Economics, Elsevier, vol. 149(C), pages 28-36.
    19. Mou, Shandong & Robb, David J. & DeHoratius, Nicole, 2018. "Retail store operations: Literature review and research directions," European Journal of Operational Research, Elsevier, vol. 265(2), pages 399-422.

  29. Transchel, Sandra & Minner, Stefan, 2011. "Economic lot-sizing and dynamic quantity competition," International Journal of Production Economics, Elsevier, vol. 133(1), pages 416-422, September.

    Cited by:

    1. Alejandro Lamas & Philippe Chevalier, 2018. "Joint dynamic pricing and lot-sizing under competition," CORE Discussion Papers RP 2938, Université catholique de Louvain, Center for Operations Research and Econometrics (CORE).

  30. Klosterhalfen, Steffen & Kiesmüller, Gudrun & Minner, Stefan, 2011. "A comparison of the constant-order and dual-index policy for dual sourcing," International Journal of Production Economics, Elsevier, vol. 133(1), pages 302-311, September.

    Cited by:

    1. Woerner, Stefan & Laumanns, Marco & Zenklusen, Rico & Fertis, Apostolos, 2015. "Approximate dynamic programming for stochastic linear control problems on compact state spaces," European Journal of Operational Research, Elsevier, vol. 241(1), pages 85-98.
    2. Serel, Doğan A., 2012. "Multi-item quick response system with budget constraint," International Journal of Production Economics, Elsevier, vol. 137(2), pages 235-249.
    3. Zhu, Stuart X., 2015. "Analysis of dual sourcing strategies under supply disruptions," International Journal of Production Economics, Elsevier, vol. 170(PA), pages 191-203.
    4. Arts, Joachim & Kiesmüller, Gudrun P., 2013. "Analysis of a two-echelon inventory system with two supply modes," European Journal of Operational Research, Elsevier, vol. 225(2), pages 263-272.
    5. Dong, Chuanwen & Transchel, Sandra & Hoberg, Kai, 2018. "An inventory control model for modal split transport: A tailored base-surge approach," European Journal of Operational Research, Elsevier, vol. 264(1), pages 89-105.

  31. Arnold, Jan & Minner, Stefan, 2011. "Financial and operational instruments for commodity procurement in quantity competition," International Journal of Production Economics, Elsevier, vol. 131(1), pages 96-106, May.

    Cited by:

    1. Inderfurth, Karl & Kelle, Peter & Kleber, Rainer, 2013. "Dual sourcing using capacity reservation and spot market: Optimal procurement policy and heuristic parameter determination," European Journal of Operational Research, Elsevier, vol. 225(2), pages 298-309.
    2. Rainer Kleber & Karl Inderfurth & Peter Kelle, 2014. "Combined sourcing and inventory management using capacity reservation and spot market," FEMM Working Papers 140005, Otto-von-Guericke University Magdeburg, Faculty of Economics and Management.
    3. Hu, Ming-Che & Chen, Yu-Hui & Huang, Li-Chun, 2014. "A sustainable vegetable supply chain using plant factories in Taiwanese markets: A Nash–Cournot model," International Journal of Production Economics, Elsevier, vol. 152(C), pages 49-56.
    4. Karl Inderfurth & Peter Kelle & Rainer Kleber, 2011. "Dual Sourcing Using Capacity Reservation and Spot Market: Optimal Procurement Policy and Heuristic Parameter Determination," FEMM Working Papers 110014, Otto-von-Guericke University Magdeburg, Faculty of Economics and Management.

  32. Francas, David & Löhndorf, Nils & Minner, Stefan, 2011. "Machine and labor flexibility in manufacturing networks," International Journal of Production Economics, Elsevier, vol. 131(1), pages 165-174, May.

    Cited by:

    1. Altendorfer, Klaus, 2017. "Relation between lead time dependent demand and capacity flexibility in a two-stage supply chain with lost sales," International Journal of Production Economics, Elsevier, vol. 194(C), pages 13-24.
    2. Shakun Preet Kaur & Jatinder Kumar & Rakesh Kumar, 2017. "The Relationship Between Flexibility of Manufacturing System Components, Competitiveness of SMEs and Business Performance: A Study of Manufacturing SMEs in Northern India," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 18(2), pages 123-137, June.
    3. Sangcheol Song, 2014. "Subsidiary Divestment: The Role of Multinational Flexibility," Management International Review, Springer, vol. 54(1), pages 47-70, February.
    4. Volling, Thomas & Matzke, Andreas & Grunewald, Martin & Spengler, Thomas S., 2013. "Planning of capacities and orders in build-to-order automobile production: A review," European Journal of Operational Research, Elsevier, vol. 224(2), pages 240-260.
    5. Correll, David & Suzuki, Yoshinori & Martens, Bobby, 2014. "Biorenewable fuels at the intersection of product and process flexibility: A novel modeling approach and application," International Journal of Production Economics, Elsevier, vol. 150(C), pages 1-8.
    6. Mossa, G. & Boenzi, F. & Digiesi, S. & Mummolo, G. & Romano, V.A., 2016. "Productivity and ergonomic risk in human based production systems: A job-rotation scheduling model," International Journal of Production Economics, Elsevier, vol. 171(P4), pages 471-477.
    7. Sreedevi, R. & Saranga, Haritha, 2017. "Uncertainty and supply chain risk: The moderating role of supply chain flexibility in risk mitigation," International Journal of Production Economics, Elsevier, vol. 193(C), pages 332-342.

  33. Altendorfer, Klaus & Minner, Stefan, 2011. "Simultaneous optimization of capacity and planned lead time in a two-stage production system with different customer due dates," European Journal of Operational Research, Elsevier, vol. 213(1), pages 134-146, August.

    Cited by:

    1. Altendorfer, Klaus & Minner, Stefan, 2015. "Influence of order acceptance policies on optimal capacity investment with stochastic customer required lead times," European Journal of Operational Research, Elsevier, vol. 243(2), pages 555-565.
    2. Altendorfer, Klaus, 2015. "Influence of lot size and planned lead time on service level and inventory for a single-stage production system with advance demand information and random required lead times," International Journal of Production Economics, Elsevier, vol. 170(PB), pages 478-488.
    3. Öner-Közen, Miray & Minner, Stefan, 2017. "Impact of priority sequencing decisions on on-time probability and expected tardiness of orders in make-to-order production systems with external due-dates," European Journal of Operational Research, Elsevier, vol. 263(2), pages 524-539.
    4. Gansterer, Margaretha & Almeder, Christian & Hartl, Richard F., 2014. "Simulation-based optimization methods for setting production planning parameters," International Journal of Production Economics, Elsevier, vol. 151(C), pages 206-213.
    5. Vahdani, Behnam & Mohammadi, M., 2015. "A bi-objective interval-stochastic robust optimization model for designing closed loop supply chain network with multi-priority queuing system," International Journal of Production Economics, Elsevier, vol. 170(PA), pages 67-87.
    6. Klaus Altendorfer & Thomas Felberbauer & Herbert Jodlbauer, 2018. "Effects of forecast errors on optimal utilisation in aggregate production planning with stochastic customer demand," Papers 1812.00773, arXiv.org.

  34. Mirko Kremer & Stefan Minner & Luk N. Van Wassenhove, 2010. "Do Random Errors Explain Newsvendor Behavior?," Manufacturing & Service Operations Management, INFORMS, vol. 12(4), pages 673-681, July.

    Cited by:

    1. Mahesh Nagarajan & Steven Shechter, 2014. "Prospect Theory and the Newsvendor Problem," Management Science, INFORMS, vol. 60(4), pages 1057-1062, April.
    2. Abdolkarim Sadrieh & Guido Voigt, 2017. "Strategic risk in supply chain contract design," Journal of Business Economics, Springer, vol. 87(1), pages 125-153, January.
    3. Elahi, Ehsan & Lamba, Narasimha & Ramaswamy, Chinthana, 2013. "How can we improve the performance of supply chain contracts? An experimental study," International Journal of Production Economics, Elsevier, vol. 142(1), pages 146-157.
    4. Dertwinkel-Kalt, Markus & Köster, Mats, 2017. "Salient compromises in the newsvendor game," Journal of Economic Behavior & Organization, Elsevier, vol. 141(C), pages 301-315.
    5. Becker-Peth, Michael & Thonemann, Ulrich W., 2016. "Reference points in revenue sharing contracts—How to design optimal supply chain contracts," European Journal of Operational Research, Elsevier, vol. 249(3), pages 1033-1049.
    6. Gary E. Bolton & Axel Ockenfels & Ulrich W. Thonemann, 2012. "Managers and Students as Newsvendors," Management Science, INFORMS, vol. 58(12), pages 2225-2233, December.
    7. Xiaoyang Long & Javad Nasiry, 2015. "Prospect Theory Explains Newsvendor Behavior: The Role of Reference Points," Management Science, INFORMS, vol. 61(12), pages 3009-3012, December.
    8. Mohammad Reza Nikbakht & Mehrdad Sadr Ara, 2016. "A new experimental model for profit maximization," Journal of Economic and Financial Studies (JEFS), LAR Center Press, vol. 4(3), pages 45-52, June.
    9. Yufei Ren & Rachel Croson, 2013. "Overconfidence in Newsvendor Orders: An Experimental Study," Management Science, INFORMS, vol. 59(11), pages 2502-2517, November.
    10. Vipin, B. & Amit, R.K., 2019. "Describing decision bias in the newsvendor problem: A prospect theory model," Omega, Elsevier, vol. 82(C), pages 132-141.
    11. Ockenfels, Axel & Selten, Reinhard, 2014. "Impulse balance in the newsvendor game," Games and Economic Behavior, Elsevier, vol. 86(C), pages 237-247.
    12. Hwang, Joon Ho & Kim, Min-Su, 2015. "Misunderstanding of the binomial distribution, market inefficiency, and learning behavior: Evidence from an exotic sports betting market," European Journal of Operational Research, Elsevier, vol. 243(1), pages 333-344.
    13. Andreas Fügener & Sebastian Schiffels & Rainer Kolisch, 2017. "Overutilization and underutilization of operating rooms - insights from behavioral health care operations management," Health Care Management Science, Springer, vol. 20(1), pages 115-128, March.
    14. Ubøe, Jan & Andersson, Jonas & Jörnsten, Kurt & Lillestøl, Jostein & Sandal, Leif K., 2014. "Probabilistic cost efficiency and bounded rationality in the newsvendor model," Discussion Papers 2014/41, Norwegian School of Economics, Department of Business and Management Science.
    15. Foster, Joshua & Deck, Cary & Farmer, Amy, 2019. "Behavioral demand effects when buyers anticipate inventory shortages," European Journal of Operational Research, Elsevier, vol. 276(1), pages 217-234.
    16. Ubøe, Jan & Andersson, Jonas & Jörnsten, Kurt & Lillestøl, Jostein & Sandal, Leif, 2017. "Statistical testing of bounded rationality with applications to the newsvendor model," European Journal of Operational Research, Elsevier, vol. 259(1), pages 251-261.
    17. Schiffels, Sebastian & Fügener, Andreas & Kolisch, Rainer & Jens Brunner, O., 2014. "On the assessment of costs in a newsvendor environment: Insights from an experimental study," Omega, Elsevier, vol. 43(C), pages 1-8.
    18. Nils Rudi & David Drake, 2009. "Observation bias: The impact of demand censoring on newsvendor level and adjustment behavior," Harvard Business School Working Papers 12-042, Harvard Business School, revised Dec 2011.
    19. Nils Rudi & David Drake, 2014. "Observation Bias: The Impact of Demand Censoring on Newsvendor Level and Adjustment Behavior," Management Science, INFORMS, vol. 60(5), pages 1334-1345, May.
    20. Mirko Kremer & Brent Moritz & Enno Siemsen, 2011. "Demand Forecasting Behavior: System Neglect and Change Detection," Management Science, INFORMS, vol. 57(10), pages 1827-1843, October.
    21. Li Chen & A. Gürhan Kök & Jordan D. Tong, 2013. "The Effect of Payment Schemes on Inventory Decisions: The Role of Mental Accounting," Management Science, INFORMS, vol. 59(2), pages 436-451, September.
    22. Castañeda, Jaime Andrés & Gonçalves, Paulo, 2018. "Ordering behavior in a newsstand experiment," International Journal of Production Economics, Elsevier, vol. 197(C), pages 186-196.

  35. Transchel, Sandra & Minner, Stefan, 2009. "The impact of dynamic pricing on the economic order decision," European Journal of Operational Research, Elsevier, vol. 198(3), pages 773-789, November.

    Cited by:

    1. Onur Kaya & Aylin Lelizar Polat, 2017. "Coordinated pricing and inventory decisions for perishable products," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 39(2), pages 589-606, March.
    2. Nielsen, Izabela Ewa & Saha, Subrata, 2018. "Procurement planning in a multi-period supply chain: An epiphany," Operations Research Perspectives, Elsevier, vol. 5(C), pages 383-398.
    3. Kuo, Chia-Wei & Huang, Kwei-Long, 2012. "Dynamic pricing of limited inventories for multi-generation products," European Journal of Operational Research, Elsevier, vol. 217(2), pages 394-403.
    4. Herbon, Avi & Khmelnitsky, Eugene, 2017. "Optimal dynamic pricing and ordering of a perishable product under additive effects of price and time on demand," European Journal of Operational Research, Elsevier, vol. 260(2), pages 546-556.
    5. He, Yuanjie, 2013. "Sequential price and quantity decisions under supply and demand risks," International Journal of Production Economics, Elsevier, vol. 141(2), pages 541-551.
    6. Mou, Shandong & Robb, David J. & DeHoratius, Nicole, 2018. "Retail store operations: Literature review and research directions," European Journal of Operational Research, Elsevier, vol. 265(2), pages 399-422.
    7. Onur Kaya & Sajjad Rahimi Ghahroodi, 2018. "Inventory control and pricing for perishable products under age and price dependent stochastic demand," Mathematical Methods of Operations Research, Springer;Gesellschaft für Operations Research (GOR);Nederlands Genootschap voor Besliskunde (NGB), vol. 88(1), pages 1-35, August.
    8. Transchel, Sandra & Minner, Stefan, 2011. "Economic lot-sizing and dynamic quantity competition," International Journal of Production Economics, Elsevier, vol. 133(1), pages 416-422, September.
    9. Peters H.J.M. & Herings P.J.J. & Berg A.H.J. van den, 2014. "The economic order decision with continuous dynamic pricing and batch supply," Research Memorandum 001, Maastricht University, Graduate School of Business and Economics (GSBE).
    10. Chen, Jing & Dong, Ming & Rong, Ying & Yang, Liang, 2018. "Dynamic pricing for deteriorating products with menu cost," Omega, Elsevier, vol. 75(C), pages 13-26.

  36. Arnold, Jan & Minner, Stefan & Eidam, Björn, 2009. "Raw material procurement with fluctuating prices," International Journal of Production Economics, Elsevier, vol. 121(2), pages 353-364, October.

    Cited by:

    1. Inderfurth, Karl & Kelle, Peter & Kleber, Rainer, 2013. "Dual sourcing using capacity reservation and spot market: Optimal procurement policy and heuristic parameter determination," European Journal of Operational Research, Elsevier, vol. 225(2), pages 298-309.
    2. Nathalie Sick & Matthias Blug & Jens Leker, 2014. "The Influence of Raw Material Prices on the Development of Hydrogen Storage Materials: The Case of Metal Hydrides," Journal of the Knowledge Economy, Springer;Portland International Center for Management of Engineering and Technology (PICMET), vol. 5(4), pages 735-760, December.
    3. Sharma, Ashish & Banerjee, Snigdha, 2013. "Optimal price markup policy for an inventory model with random price fluctuations and option for additional purchase," International Journal of Production Economics, Elsevier, vol. 146(2), pages 620-633.
    4. Hongyan Li & Joern Meissner, 2006. "Competition under Dynamic Lot Sizing Costs with Capacity Acquisition," Working Papers MRG/0006, Department of Management Science, Lancaster University, revised Apr 2010.
    5. M. Li & P. Guo & G. Yang & S. Fang, 2014. "IB-ICCMSP: An Integrated Irrigation Water Optimal Allocation and Planning Model Based on Inventory Theory under Uncertainty," Water Resources Management: An International Journal, Published for the European Water Resources Association (EWRA), Springer;European Water Resources Association (EWRA), vol. 28(1), pages 241-260, January.
    6. Karl Inderfurth & Peter Kelle & Rainer Kleber, 2011. "Dual Sourcing Using Capacity Reservation and Spot Market: Optimal Procurement Policy and Heuristic Parameter Determination," FEMM Working Papers 110014, Otto-von-Guericke University Magdeburg, Faculty of Economics and Management.

  37. Francas, David & Minner, Stefan, 2009. "Manufacturing network configuration in supply chains with product recovery," Omega, Elsevier, vol. 37(4), pages 757-769, August.

    Cited by:

    1. Georgiadis, Patroklos & Athanasiou, Efstratios, 2013. "Flexible long-term capacity planning in closed-loop supply chains with remanufacturing," European Journal of Operational Research, Elsevier, vol. 225(1), pages 44-58.
    2. Li, Kate J. & Xu, Susan H., 2015. "The comparison between trade-in and leasing of a product with technology innovations," Omega, Elsevier, vol. 54(C), pages 134-146.
    3. Hamed Soleimani & Mirmehdi Seyyed-Esfahani & Mohsen Akbarpour Shirazi, 2016. "A new multi-criteria scenario-based solution approach for stochastic forward/reverse supply chain network design," Annals of Operations Research, Springer, vol. 242(2), pages 399-421, July.
    4. Koh, S.C.L. & Gunasekaran, A. & Tseng, C.S., 2012. "Cross-tier ripple and indirect effects of directives WEEE and RoHS on greening a supply chain," International Journal of Production Economics, Elsevier, vol. 140(1), pages 305-317.
    5. Amini, Mehdi & Li, Haitao, 2011. "Supply chain configuration for diffusion of new products: An integrated optimization approach," Omega, Elsevier, vol. 39(3), pages 313-322, June.
    6. Georgiadis, Michael C. & Tsiakis, Panagiotis & Longinidis, Pantelis & Sofioglou, Maria K., 2011. "Optimal design of supply chain networks under uncertain transient demand variations," Omega, Elsevier, vol. 39(3), pages 254-272, June.
    7. Schulz, Tobias & Voigt, Guido, 2014. "A flexibly structured lot sizing heuristic for a static remanufacturing system," Omega, Elsevier, vol. 44(C), pages 21-31.
    8. Nasir, Mohammed Haneef Abdul & Genovese, Andrea & Acquaye, Adolf A. & Koh, S.C.L. & Yamoah, Fred, 2017. "Comparing linear and circular supply chains: A case study from the construction industry," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 443-457.
    9. Govindan, Kannan & Soleimani, Hamed & Kannan, Devika, 2015. "Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future," European Journal of Operational Research, Elsevier, vol. 240(3), pages 603-626.
    10. Hong, Zhaofu & Dai, Wei & Luh, Hsing & Yang, Chenchen, 2018. "Optimal configuration of a green product supply chain with guaranteed service time and emission constraints," European Journal of Operational Research, Elsevier, vol. 266(2), pages 663-677.
    11. Gaur, Jighyasu & Amini, Mehdi & Rao, A.K., 2017. "Closed-loop supply chain configuration for new and reconditioned products: An integrated optimization model," Omega, Elsevier, vol. 66(PB), pages 212-223.
    12. Genovese, Andrea & Acquaye, Adolf A. & Figueroa, Alejandro & Koh, S.C. Lenny, 2017. "Sustainable supply chain management and the transition towards a circular economy: Evidence and some applications," Omega, Elsevier, vol. 66(PB), pages 344-357.
    13. Hua, Zhongsheng & Zhang, Xuemei & Xu, Xiaoyan, 2011. "Product design strategies in a manufacturer-retailer distribution channel," Omega, Elsevier, vol. 39(1), pages 23-32, January.
    14. Barker, Theresa J. & Zabinsky, Zelda B., 2011. "A multicriteria decision making model for reverse logistics using analytical hierarchy process," Omega, Elsevier, vol. 39(5), pages 558-573, October.
    15. Lin, Yi-Kuei & Chang, Ping-Chen, 2012. "Evaluate the system reliability for a manufacturing network with reworking actions," Reliability Engineering and System Safety, Elsevier, vol. 106(C), pages 127-137.
    16. Ruiz-Benítez, Rocío & Ketzenberg, Michael & van der Laan, Erwin A., 2014. "Managing consumer returns in high clockspeed industries," Omega, Elsevier, vol. 43(C), pages 54-63.
    17. Wu, Kuo-Jui & Liao, Ching-Jong & Tseng, Ming-Lang & Chiu, Anthony S.F., 2015. "Exploring decisive factors in green supply chain practices under uncertainty," International Journal of Production Economics, Elsevier, vol. 159(C), pages 147-157.

  38. Transchel, Sandra & Minner, Stefan, 2009. "Dynamic pricing and replenishment in the warehouse scheduling problem--A common cycle approach," International Journal of Production Economics, Elsevier, vol. 118(1), pages 331-338, March.

    Cited by:

    1. Zhang, Guoqing & Nishi, Tatsushi & Turner, Sarina D.O. & Oga, Keisuke & Li, Xindan, 2017. "An integrated strategy for a production planning and warehouse layout problem: Modeling and solution approaches," Omega, Elsevier, vol. 68(C), pages 85-94.
    2. Buisman, M.E. & Haijema, R. & Bloemhof-Ruwaard, J.M., 2019. "Discounting and dynamic shelf life to reduce fresh food waste at retailers," International Journal of Production Economics, Elsevier, vol. 209(C), pages 274-284.

  39. Minner, Stefan, 2009. "A comparison of simple heuristics for multi-product dynamic demand lot-sizing with limited warehouse capacity," International Journal of Production Economics, Elsevier, vol. 118(1), pages 305-310, March.

    Cited by:

    1. Ayse Akbalik & Bernard Penz & Christophe Rapine, 2015. "Capacitated lot sizing problems with inventory bounds," Annals of Operations Research, Springer, vol. 229(1), pages 1-18, June.
    2. Brahimi, Nadjib & Absi, Nabil & Dauzère-Pérès, Stéphane & Nordli, Atle, 2017. "Single-item dynamic lot-sizing problems: An updated survey," European Journal of Operational Research, Elsevier, vol. 263(3), pages 838-863.
    3. Simon Emde, 2017. "Scheduling the replenishment of just-in-time supermarkets in assembly plants," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 39(1), pages 321-345, January.
    4. Sazvar, Z. & Mirzapour Al-e-hashem, S.M.J. & Govindan, K. & Bahli, B., 2016. "A novel mathematical model for a multi-period, multi-product optimal ordering problem considering expiry dates in a FEFO system," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 93(C), pages 232-261.
    5. Luo, Kai & Bollapragada, Ramesh & Kerbache, Laoucine, 2017. "Inventory allocation models for a two-stage, two-product, capacitated supplier and retailer problem with random demand," International Journal of Production Economics, Elsevier, vol. 187(C), pages 168-181.
    6. Ming-Jong Yao & Jia-Yen Huang, 2017. "Optimal lot-sizing and joint replenishment strategy under a piecewise linear warehousing cost structure," Journal of Intelligent Manufacturing, Springer, vol. 28(3), pages 791-803, March.

  40. Francas, David & Kremer, Mirko & Minner, Stefan & Friese, Markus, 2009. "Strategic process flexibility under lifecycle demand," International Journal of Production Economics, Elsevier, vol. 121(2), pages 427-440, October.

    Cited by:

    1. Marc Reimann & Philippe Schiltknecht, 2009. "The role of risk preferences and flexibility for risk management: lessons from a custom manufacturing environment," Review of Managerial Science, Springer, vol. 3(2), pages 117-140, July.
    2. Francas, David & Löhndorf, Nils & Minner, Stefan, 2011. "Machine and labor flexibility in manufacturing networks," International Journal of Production Economics, Elsevier, vol. 131(1), pages 165-174, May.
    3. Volling, Thomas & Matzke, Andreas & Grunewald, Martin & Spengler, Thomas S., 2013. "Planning of capacities and orders in build-to-order automobile production: A review," European Journal of Operational Research, Elsevier, vol. 224(2), pages 240-260.
    4. Dipankar Bose & A. K. Chatterjee & Samir Barman, 2016. "Towards dominant flexibility configurations in strategic capacity planning under demand uncertainty," OPSEARCH, Springer;Operational Research Society of India, vol. 53(3), pages 604-619, September.

  41. Kelle, Peter & Transchel, Sandra & Minner, Stefan, 2009. "Buyer-supplier cooperation and negotiation support with random yield consideration," International Journal of Production Economics, Elsevier, vol. 118(1), pages 152-159, March.

    Cited by:

    1. Guo Li & Mengqi Liu & Xu Guan, 2017. "Diversity of payment contracts in a decentralized assembly system," Annals of Operations Research, Springer, vol. 257(1), pages 613-639, October.
    2. Arifoglu, Kenan & Özekici, Süleyman, 2011. "Inventory management with random supply and imperfect information: A hidden Markov model," International Journal of Production Economics, Elsevier, vol. 134(1), pages 123-137, November.
    3. Jain, Tarun & Hazra, Jishnu, 2017. "Sourcing strategies under agglomeration economies, capacity risks and retail competition," International Journal of Production Economics, Elsevier, vol. 191(C), pages 311-322.
    4. Glock, Christoph H., 2012. "The joint economic lot size problem: A review," International Journal of Production Economics, Elsevier, vol. 135(2), pages 671-686.
    5. He, Yuanjie, 2013. "Sequential price and quantity decisions under supply and demand risks," International Journal of Production Economics, Elsevier, vol. 141(2), pages 541-551.
    6. Yu, Jonas C.P., 2013. "A collaborative strategy for deteriorating inventory system with imperfect items and supplier credits," International Journal of Production Economics, Elsevier, vol. 143(2), pages 403-409.
    7. Laslo, Zohar & Gurevich, Gregory & Keren, Baruch, 2009. "Economic distribution of budget among producers for fulfilling orders under delivery chance constraints," International Journal of Production Economics, Elsevier, vol. 122(2), pages 656-662, December.

  42. Minner, Stefan, 2007. "A note on how to compute economic order quantities without derivatives by cost comparisons," International Journal of Production Economics, Elsevier, vol. 105(1), pages 293-296, January.

    Cited by:

    1. Wee, Hui-Ming & Wang, Wan-Tsu & Chung, Chun-Jen, 2009. "A modified method to compute economic order quantities without derivatives by cost-difference comparisons," European Journal of Operational Research, Elsevier, vol. 194(1), pages 336-338, April.
    2. San-José, Luis A. & Sicilia, Joaquín & García-Laguna, Juan, 2014. "Optimal lot size for a production–inventory system with partial backlogging and mixture of dispatching policies," International Journal of Production Economics, Elsevier, vol. 155(C), pages 194-203.
    3. Francis Leung, Kit-Nam, 2008. "Technical note: A use of the complete squares method to solve and analyze a quadratic objective function with two decision variables exemplified via a deterministic inventory model with a mixture of b," International Journal of Production Economics, Elsevier, vol. 113(1), pages 275-281, May.
    4. Leung, Kit-Nam Francis, 2010. "Some comments on "A simple method to compute economic order quantities"," European Journal of Operational Research, Elsevier, vol. 201(3), pages 960-961, March.
    5. Teng, Jinn-Tsair, 2009. "A simple method to compute economic order quantities," European Journal of Operational Research, Elsevier, vol. 198(1), pages 351-353, October.
    6. Chung, Kun-Jen, 2009. ""A note on the economic lot size of the integrated vendor-buyer inventory system derived without derivatives": A comment," European Journal of Operational Research, Elsevier, vol. 198(3), pages 979-982, November.
    7. Sphicas, Georghios P., 2014. "Generalized EOQ formula using a new parameter: Coefficient of backorder attractiveness," International Journal of Production Economics, Elsevier, vol. 155(C), pages 143-147.

  43. Minner, Stefan & Silver, Edward A., 2007. "Replenishment policies for multiple products with compound-Poisson demand that share a common warehouse," International Journal of Production Economics, Elsevier, vol. 108(1-2), pages 388-398, July.

    Cited by:

    1. Jackson, Jonathan E. & Munson, Charles L., 2016. "Shared resource capacity expansion decisions for multiple products with quantity discounts," European Journal of Operational Research, Elsevier, vol. 253(3), pages 602-613.
    2. Y. Barron, 2019. "A state-dependent perishability (s, S) inventory model with random batch demands," Annals of Operations Research, Springer, vol. 280(1), pages 65-98, September.
    3. Minner, Stefan, 2009. "A comparison of simple heuristics for multi-product dynamic demand lot-sizing with limited warehouse capacity," International Journal of Production Economics, Elsevier, vol. 118(1), pages 305-310, March.

  44. Minner, Stefan & Silver, Edward A., 2005. "Evaluation of two simple extreme transshipment strategies," International Journal of Production Economics, Elsevier, vol. 93(1), pages 1-11, January.

    Cited by:

    1. Tiacci, Lorenzo & Saetta, Stefano, 2011. "Reducing the mean supply delay of spare parts using lateral transshipments policies," International Journal of Production Economics, Elsevier, vol. 133(1), pages 182-191, September.
    2. Summerfield, Nichalin S. & Dror, Moshe, 2012. "Stochastic programming for decentralized newsvendor with transshipment," International Journal of Production Economics, Elsevier, vol. 137(2), pages 292-303.
    3. Paterson, Colin & Kiesmüller, Gudrun & Teunter, Ruud & Glazebrook, Kevin, 2011. "Inventory models with lateral transshipments: A review," European Journal of Operational Research, Elsevier, vol. 210(2), pages 125-136, April.
    4. Olsson, Fredrik, 2009. "Optimal policies for inventory systems with lateral transshipments," International Journal of Production Economics, Elsevier, vol. 118(1), pages 175-184, March.
    5. Tai, Allen H. & Ching, Wai-Ki, 2014. "Optimal inventory policy for a Markovian two-echelon system with returns and lateral transshipment," International Journal of Production Economics, Elsevier, vol. 151(C), pages 48-55.
    6. Tiacci, Lorenzo & Saetta, Stefano, 2011. "A heuristic for balancing the inventory level of different locations through lateral shipments," International Journal of Production Economics, Elsevier, vol. 131(1), pages 87-95, May.
    7. Olsson, Fredrik, 2010. "An inventory model with unidirectional lateral transshipments," European Journal of Operational Research, Elsevier, vol. 200(3), pages 725-732, February.
    8. Zümbül Atan & Lawrence V. Snyder & George R. Wilson, 2018. "Transshipment policies for systems with multiple retailers and two demand classes," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 40(1), pages 159-186, January.

  45. Minner, Stefan & Silver, Edward A. & Robb, David J., 2003. "An improved heuristic for deciding on emergency transshipments," European Journal of Operational Research, Elsevier, vol. 148(2), pages 384-400, July.

    Cited by:

    1. Tiacci, Lorenzo & Saetta, Stefano, 2011. "Reducing the mean supply delay of spare parts using lateral transshipments policies," International Journal of Production Economics, Elsevier, vol. 133(1), pages 182-191, September.
    2. Archibald, T.W. & Black, D. & Glazebrook, K.D., 2009. "An index heuristic for transshipment decisions in multi-location inventory systems based on a pairwise decomposition," European Journal of Operational Research, Elsevier, vol. 192(1), pages 69-78, January.
    3. Tiemessen, H.G.H. & Fleischmann, M. & van Houtum, G.J. & van Nunen, J.A.E.E. & Pratsini, E., 2013. "Dynamic demand fulfillment in spare parts networks with multiple customer classes," European Journal of Operational Research, Elsevier, vol. 228(2), pages 367-380.
    4. van Wijk, A.C.C. & Adan, I.J.B.F. & van Houtum, G.J., 2019. "Optimal lateral transshipment policies for a two location inventory problem with multiple demand classes," European Journal of Operational Research, Elsevier, vol. 272(2), pages 481-495.
    5. Paterson, Colin & Kiesmüller, Gudrun & Teunter, Ruud & Glazebrook, Kevin, 2011. "Inventory models with lateral transshipments: A review," European Journal of Operational Research, Elsevier, vol. 210(2), pages 125-136, April.
    6. Minner, Stefan & Silver, Edward A., 2005. "Evaluation of two simple extreme transshipment strategies," International Journal of Production Economics, Elsevier, vol. 93(1), pages 1-11, January.
    7. Joern Meissner & Olga Rusyaeva, 2015. "Approximate Dynamic Programming for lateral transshipment problems in multi-location inventory systems," Working Papers MRG/0025, Department of Logistics, Kuehne Logistics University, revised Mar 2016.
    8. Rottkemper, Beate & Fischer, Kathrin & Blecken, Alexander, 2012. "A transshipment model for distribution and inventory relocation under uncertainty in humanitarian operations," Socio-Economic Planning Sciences, Elsevier, vol. 46(1), pages 98-109.
    9. T W Archibald & D P Black & K D Glazebrook, 2010. "The use of simple calibrations of individual locations in making transshipment decisions in a multi-location inventory network," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 61(2), pages 294-305, February.
    10. Paterson, Colin & Teunter, Ruud & Glazebrook, Kevin, 2012. "Enhanced lateral transshipments in a multi-location inventory system," European Journal of Operational Research, Elsevier, vol. 221(2), pages 317-327.
    11. Tiacci, Lorenzo & Saetta, Stefano, 2011. "A heuristic for balancing the inventory level of different locations through lateral shipments," International Journal of Production Economics, Elsevier, vol. 131(1), pages 87-95, May.
    12. Lee, Young Hae & Jung, Jung Woo & Jeon, Young Sang, 2007. "An effective lateral transshipment policy to improve service level in the supply chain," International Journal of Production Economics, Elsevier, vol. 106(1), pages 115-126, March.
    13. Hochmuth, Christian A. & Köchel, Peter, 2012. "How to order and transship in multi-location inventory systems: The simulation optimization approach," International Journal of Production Economics, Elsevier, vol. 140(2), pages 646-654.
    14. Teunter, R.H. & Syntetos, A.A. & Babai, M.Z., 2010. "Determining order-up-to levels under periodic review for compound binomial (intermittent) demand," European Journal of Operational Research, Elsevier, vol. 203(3), pages 619-624, June.
    15. T W Archibald, 2007. "Modelling replenishment and transshipment decisions in periodic review multilocation inventory systems," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 58(7), pages 948-956, July.
    16. Kranenburg, A.A. & van Houtum, G.J., 2009. "A new partial pooling structure for spare parts networks," European Journal of Operational Research, Elsevier, vol. 199(3), pages 908-921, December.
    17. Satır, Benhür & Savasaneril, Secil & Serin, Yasemin, 2012. "Pooling through lateral transshipments in service parts systems," European Journal of Operational Research, Elsevier, vol. 220(2), pages 370-377.
    18. Kang, Jae-Hun & Kim, Yeong-Dae, 2012. "Inventory control in a two-level supply chain with risk pooling effect," International Journal of Production Economics, Elsevier, vol. 135(1), pages 116-124.
    19. Sven Axsäter, 2003. "A New Decision Rule for Lateral Transshipments in Inventory Systems," Management Science, INFORMS, vol. 49(9), pages 1168-1179, September.
    20. Zümbül Atan & Lawrence V. Snyder & George R. Wilson, 2018. "Transshipment policies for systems with multiple retailers and two demand classes," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 40(1), pages 159-186, January.

  46. Minner, Stefan, 2003. "Multiple-supplier inventory models in supply chain management: A review," International Journal of Production Economics, Elsevier, vol. 81(1), pages 265-279, January.

    Cited by:

    1. Karl Inderfurth, 2015. "Safety Stocks in Centralized and Decentralized Supply Chains under Different Types of Random Yields," FEMM Working Papers 150007, Otto-von-Guericke University Magdeburg, Faculty of Economics and Management.
    2. Steffen T. Klosterhalfen & Stefan Minner & Sean P. Willems, 2014. "Strategic Safety Stock Placement in Supply Networks with Static Dual Supply," Manufacturing & Service Operations Management, INFORMS, vol. 16(2), pages 204-219, May.
    3. Kouki, Chaaben & Babai, M. Zied & Minner, Stefan, 2018. "On the benefit of dual-sourcing in managing perishable inventory," International Journal of Production Economics, Elsevier, vol. 204(C), pages 1-17.
    4. Inderfurth, Karl & Kelle, Peter & Kleber, Rainer, 2013. "Dual sourcing using capacity reservation and spot market: Optimal procurement policy and heuristic parameter determination," European Journal of Operational Research, Elsevier, vol. 225(2), pages 298-309.
    5. Martinez de Albeniz, Victor, 2007. "Pricing in a duopoly with a lead time advantage," IESE Research Papers D/720, IESE Business School.
    6. Scheller-Wolf, Alan & Tayur, Sridhar, 2009. "Risk sharing in supply chains using order bands--Analytical results and managerial insights," International Journal of Production Economics, Elsevier, vol. 121(2), pages 715-727, October.
    7. Cheaitou, Ali & Cheaytou, Rima, 2019. "A two-stage capacity reservation supply contract with risky supplier and forecast updating," International Journal of Production Economics, Elsevier, vol. 209(C), pages 42-60.
    8. Levner, Eugene & Perlman, Yael & Cheng, T.C.E. & Levner, Ilya, 2011. "A network approach to modeling the multi-echelon spare-part inventory system with backorders and interval-valued demand," International Journal of Production Economics, Elsevier, vol. 132(1), pages 43-51, July.
    9. Johansen, Søren Glud, 2019. "Emergency orders in the periodic-review inventory system with fixed ordering costs and stochastic lead times for normal orders," International Journal of Production Economics, Elsevier, vol. 209(C), pages 205-214.
    10. Huang, Boray & Wu, Andy, 2017. "Reduce shortage with self-reservation policy for a manufacturer paying both fixed and variable stockout expenditure," European Journal of Operational Research, Elsevier, vol. 262(3), pages 944-953.
    11. Jaber, Mohamad Y. & Rosen, Marc A., 2008. "The economic order quantity repair and waste disposal model with entropy cost," European Journal of Operational Research, Elsevier, vol. 188(1), pages 109-120, July.
    12. Pritee Ray & Mamata Jenamani, 2016. "Sourcing decision under disruption risk with supply and demand uncertainty: A newsvendor approach," Annals of Operations Research, Springer, vol. 237(1), pages 237-262, February.
    13. Song, Dong-Ping & Dong, Jing-Xin & Xu, Jingjing, 2014. "Integrated inventory management and supplier base reduction in a supply chain with multiple uncertainties," European Journal of Operational Research, Elsevier, vol. 232(3), pages 522-536.
    14. Gérard P. Cachon & Fuqiang Zhang, 2007. "Obtaining Fast Service in a Queueing System via Performance-Based Allocation of Demand," Management Science, INFORMS, vol. 53(3), pages 408-420, March.
    15. Axsater, Sven, 2007. "A heuristic for triggering emergency orders in an inventory system," European Journal of Operational Research, Elsevier, vol. 176(2), pages 880-891, January.
    16. Klosterhalfen, Steffen & Kiesmüller, Gudrun & Minner, Stefan, 2011. "A comparison of the constant-order and dual-index policy for dual sourcing," International Journal of Production Economics, Elsevier, vol. 133(1), pages 302-311, September.
    17. Maqbool Dada & Nicholas C. Petruzzi & Leroy B. Schwarz, 2007. "A Newsvendor's Procurement Problem when Suppliers Are Unreliable," Manufacturing & Service Operations Management, INFORMS, vol. 9(1), pages 9-32, August.
    18. Li, Xiaopeng, 2013. "An integrated modeling framework for design of logistics networks with expedited shipment services," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 56(C), pages 46-63.
    19. Wiedenmann, Susanne & Geldermann, Jutta, 2015. "Supply planning for processors of agricultural raw materials," European Journal of Operational Research, Elsevier, vol. 242(2), pages 606-619.
    20. Sean X. Zhou & Chaolin Yang, 2016. "Continuous-Review ( R, nQ ) Policies for Inventory Systems with Dual Delivery Modes," Operations Research, INFORMS, vol. 64(6), pages 1302-1319, December.
    21. Firouz, Mohammad & Keskin, Burcu B. & Melouk, Sharif H., 2017. "An integrated supplier selection and inventory problem with multi-sourcing and lateral transshipments," Omega, Elsevier, vol. 70(C), pages 77-93.
    22. Silbermayr, Lena & Minner, Stefan, 2014. "A multiple sourcing inventory model under disruption risk," International Journal of Production Economics, Elsevier, vol. 149(C), pages 37-46.
    23. Ganesh Janakiraman & Sridhar Seshadri & Anshul Sheopuri, 2015. "Analysis of Tailored Base-Surge Policies in Dual Sourcing Inventory Systems," Management Science, INFORMS, vol. 61(7), pages 1547-1561, July.
    24. Silbermayr, Lena & Minner, Stefan, 2016. "Dual sourcing under disruption risk and cost improvement through learning," European Journal of Operational Research, Elsevier, vol. 250(1), pages 226-238.
    25. Hsin Chang & Chung-Jye Hung & Kit Wong & Chin-Ho Lee, 2013. "Using the balanced scorecard on supply chain integration performance—a case study of service businesses," Service Business, Springer;Pan-Pacific Business Association, vol. 7(4), pages 539-561, December.
    26. Tachizawa, Elcio M. & Gimenez, Cristina, 2010. "Supply flexibility strategies in Spanish firms: Results from a survey," International Journal of Production Economics, Elsevier, vol. 124(1), pages 214-224, March.
    27. Woerner, Stefan & Laumanns, Marco & Zenklusen, Rico & Fertis, Apostolos, 2015. "Approximate dynamic programming for stochastic linear control problems on compact state spaces," European Journal of Operational Research, Elsevier, vol. 241(1), pages 85-98.
    28. Merzifonluoglu, Yasemin, 2015. "Risk averse supply portfolio selection with supply, demand and spot market volatility," Omega, Elsevier, vol. 57(PA), pages 40-53.
    29. A K Mishra & P R Tadikamalla, 2006. "Order splitting in single sourcing with scheduled-release orders," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 57(2), pages 177-189, February.
    30. Pritee Ray & Mamata Jenamani, 2016. "Sourcing decision under disruption risk with supply and demand uncertainty: A newsvendor approach," Annals of Operations Research, Springer, vol. 237(1), pages 237-262, February.
    31. Jakšič, M. & Fransoo, J.C., 2018. "Dual sourcing in the age of near-shoring: Trading off stochastic capacity limitations and long lead times," European Journal of Operational Research, Elsevier, vol. 267(1), pages 150-161.
    32. Wagner, Laura & Gürbüz, Mustafa Ҫagri & Parlar, Mahmut, 2019. "Is it fake? Using potentially low quality suppliers as back-up when genuine suppliers are unavailable," International Journal of Production Economics, Elsevier, vol. 213(C), pages 185-200.
    33. Shenle Pan & Michele Nigrelli & Eric Ballot & Rochdi Sarraj, 2013. "Performance Assessment Of Distributed Inventory In Physical Internet," Post-Print hal-00876280, HAL.
    34. Hagspiel, Simeon, 2016. "Supply Chain Reliability and the Role of Individual Suppliers," EWI Working Papers 2016-5, Energiewirtschaftliches Institut an der Universitaet zu Koeln (EWI).
    35. Schmid, Verena & Doerner, Karl F. & Laporte, Gilbert, 2013. "Rich routing problems arising in supply chain management," European Journal of Operational Research, Elsevier, vol. 224(3), pages 435-448.
    36. Hu, Xiangling & Motwani, Jaideep G., 2014. "Minimizing downside risks for global sourcing under price-sensitive stochastic demand, exchange rate uncertainties, and supplier capacity constraints," International Journal of Production Economics, Elsevier, vol. 147(PB), pages 398-409.
    37. Zhang, Ju-liang & Zhang, Ming-yu, 2011. "Supplier selection and purchase problem with fixed cost and constrained order quantities under stochastic demand," International Journal of Production Economics, Elsevier, vol. 129(1), pages 1-7, January.
    38. Pérez, Cinthia & Geunes, Joseph, 2014. "A (Q,R) inventory replenishment model with two delivery modes," European Journal of Operational Research, Elsevier, vol. 237(2), pages 528-545.
    39. Cheaitou, Ali & van Delft, Christian & Jemai, Zied & Dallery, Yves, 2014. "Optimal policy structure characterization for a two-period dual-sourcing inventory control model with forecast updating," International Journal of Production Economics, Elsevier, vol. 157(C), pages 238-249.
    40. Volodymyr Babich & Apostolos N. Burnetas & Peter H. Ritchken, 2007. "Competition and Diversification Effects in Supply Chains with Supplier Default Risk," Manufacturing & Service Operations Management, INFORMS, vol. 9(2), pages 123-146, October.
    41. Basu, Arnab & Jain, Tarun & Hazra, Jishnu, 2018. "Supplier selection under production learning and process improvements," International Journal of Production Economics, Elsevier, vol. 204(C), pages 411-420.
    42. Abdel-Malek, Layek & Kullpattaranirun, Tarathorn & Nanthavanij, Suebsak, 2005. "A framework for comparing outsourcing strategies in multi-layered supply chains," International Journal of Production Economics, Elsevier, vol. 97(3), pages 318-328, September.
    43. Laurent Lim, Lâm & Alpan, Gülgün & Penz, Bernard, 2014. "Reconciling sales and operations management with distant suppliers in the automotive industry: A simulation approach," International Journal of Production Economics, Elsevier, vol. 151(C), pages 20-36.
    44. Preetam Basu & Soumita Ghosh & Milan Kumar, 2019. "Supplier ratings and dynamic sourcing strategies to mitigate supply disruption risks," DECISION: Official Journal of the Indian Institute of Management Calcutta, Springer;Indian Institute of Management Calcutta, vol. 46(1), pages 41-57, March.
    45. Cheaitou, Ali & van Delft, Christian, 2013. "Finite horizon stochastic inventory problem with dual sourcing: Near myopic and heuristics bounds," International Journal of Production Economics, Elsevier, vol. 143(2), pages 371-378.
    46. Mitra, Subrata, 2009. "Analysis of a two-echelon inventory system with returns," Omega, Elsevier, vol. 37(1), pages 106-115, February.
    47. Basu, Preetam & Avittathur, Balram, 2018. "Pricing and sourcing strategies for competing retailers in supply chains under disruption riskAuthor-Name: Kumar, Milan," European Journal of Operational Research, Elsevier, vol. 265(2), pages 533-543.
    48. Huang, George Q. & Qu, T., 2008. "Extending analytical target cascading for optimal configuration of supply chains with alternative autonomous suppliers," International Journal of Production Economics, Elsevier, vol. 115(1), pages 39-54, September.
    49. Zahraei, Seyed Mehdi & Teo, Chee-Chong, 2017. "Optimizing a supply network with production smoothing, freight expediting and safety stocks: An analysis of tactical trade-offs," European Journal of Operational Research, Elsevier, vol. 262(1), pages 75-88.
    50. Sting, Fabian J. & Huchzermeier, Arnd, 2010. "Ensuring responsive capacity: How to contract with backup suppliers," European Journal of Operational Research, Elsevier, vol. 207(2), pages 725-735, December.
    51. Diaz, Rafael & Bailey, Mike, 2011. "Building knowledge to improve enterprise performance from inventory simulation models," International Journal of Production Economics, Elsevier, vol. 134(1), pages 108-113, November.
    52. Jain, Tarun & Hazra, Jishnu & Cheng, T.C.E., 2018. "Sourcing under overconfident buyer and suppliers," International Journal of Production Economics, Elsevier, vol. 206(C), pages 93-109.
    53. Jain, Tarun & Hazra, Jishnu, 2017. "Sourcing strategies under agglomeration economies, capacity risks and retail competition," International Journal of Production Economics, Elsevier, vol. 191(C), pages 311-322.
    54. Shah, Nilopa & Brueckner, Jan K., 2011. "Price and Frequency Competition in Freight Transportation," University of California Transportation Center, Working Papers qt1n42k26q, University of California Transportation Center.
    55. Golini, Ruggero & Kalchschmidt, Matteo, 2015. "Managing inventories in global sourcing contexts: A contingency perspective," International Journal of Production Economics, Elsevier, vol. 165(C), pages 64-78.
    56. Hajji, Adnene & Gharbi, Ali & Kenne, Jean-Pierre & Pellerin, Robert, 2011. "Production control and replenishment strategy with multiple suppliers," European Journal of Operational Research, Elsevier, vol. 208(1), pages 67-74, January.
    57. Langenberg, Kerstin U. & Seifert, Ralf W. & Tancrez, Jean-Sébastien, 2012. "Aligning supply chain portfolios with product portfolios," International Journal of Production Economics, Elsevier, vol. 135(1), pages 500-513.
    58. Duran, Alfonso & Gutierrez, Gil & Zequeira, Romulo I., 2004. "A continuous review inventory model with order expediting," International Journal of Production Economics, Elsevier, vol. 87(2), pages 157-169, January.
    59. Ball, Daniel R. & Deshmukh, Abhijit & Kapadia, Nikunj, 2015. "An options-based approach to coordinating distributed decision systems," European Journal of Operational Research, Elsevier, vol. 240(3), pages 706-717.
    60. Golini, Ruggero & Kalchschmidt, Matteo, 2011. "Moderating the impact of global sourcing on inventories through supply chain management," International Journal of Production Economics, Elsevier, vol. 133(1), pages 86-94, September.
    61. Aditya Jain & Harry Groenevelt & Nils Rudi, 2010. "Continuous Review Inventory Model with Dynamic Choice of Two Freight Modes with Fixed Costs," Manufacturing & Service Operations Management, INFORMS, vol. 12(1), pages 120-139, August.
    62. Reimann, Marc, 2011. "Speculative production and anticipative reservation of reactive capacity by a multi-product newsvendor," European Journal of Operational Research, Elsevier, vol. 211(1), pages 35-46, May.
    63. Meena, P.L. & Sarmah, S.P., 2013. "Multiple sourcing under supplier failure risk and quantity discount: A genetic algorithm approach," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 50(C), pages 84-97.
    64. Wagner, Stephan M. & Bode, Christoph & Koziol, Philipp, 2009. "Supplier default dependencies: Empirical evidence from the automotive industry," European Journal of Operational Research, Elsevier, vol. 199(1), pages 150-161, November.
    65. Ochtman, G. & Dekker, R. & van Asperen, E. & Kusters, W., 2004. "Floating stocks in FMCG supply chains," Econometric Institute Research Papers EI 2004-17, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    66. Joachim Arts & Rob Basten & Geert-Jan Van Houtum, 2016. "Repairable Stocking and Expediting in a Fluctuating Demand Environment: Optimal Policy and Heuristics," Operations Research, INFORMS, vol. 64(6), pages 1285-1301, December.
    67. Kyungchul Park & Kyungsik Lee, 2016. "Distribution-robust single-period inventory control problem with multiple unreliable suppliers," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 38(4), pages 949-966, October.
    68. Tang, Christopher S., 2006. "Perspectives in supply chain risk management," International Journal of Production Economics, Elsevier, vol. 103(2), pages 451-488, October.
    69. Mital, Monika & Del Giudice, Manlio & Papa, Armando, 2018. "Comparing supply chain risks for multiple product categories with cognitive mapping and Analytic Hierarchy Process," Technological Forecasting and Social Change, Elsevier, vol. 131(C), pages 159-170.
    70. El Saadany, Ahmed M.A. & Jaber, Mohamad Y., 2011. "A production/remanufacture model with returns' subassemblies managed differently," International Journal of Production Economics, Elsevier, vol. 133(1), pages 119-126, September.
    71. Demeter, Krisztina & Szász, Levente & Kő, Andrea, 2019. "A text mining based overview of inventory research in the ISIR special issues 1994–2016," International Journal of Production Economics, Elsevier, vol. 209(C), pages 134-146.
    72. Axsäter, Sven, 2014. "An improved decision rule for emergency replenishments," International Journal of Production Economics, Elsevier, vol. 157(C), pages 313-317.
    73. Qi, Xiangtong, 2007. "Order splitting with multiple capacitated suppliers," European Journal of Operational Research, Elsevier, vol. 178(2), pages 421-432, April.
    74. Serel, Dogan A., 2008. "Inventory and pricing decisions in a single-period problem involving risky supply," International Journal of Production Economics, Elsevier, vol. 116(1), pages 115-128, November.
    75. Caniato, Federico & Golini, Ruggero & Kalchschmidt, Matteo, 2013. "The effect of global supply chain configuration on the relationship between supply chain improvement programs and performance," International Journal of Production Economics, Elsevier, vol. 143(2), pages 285-293.
    76. Qiushi Chen & Lei Zhao & Jan C. Fransoo & Zhe Li, 2019. "Dual-mode inventory management under a chance credit constraint," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 41(1), pages 147-178, March.
    77. Sodhi, ManMohan S. & Tang, Christopher S., 2009. "Modeling supply-chain planning under demand uncertainty using stochastic programming: A survey motivated by asset-liability management," International Journal of Production Economics, Elsevier, vol. 121(2), pages 728-738, October.
    78. Peter Berling & Victor Martínez-de-Albéniz, 2016. "Dynamic Speed Optimization in Supply Chains with Stochastic Demand," Transportation Science, INFORMS, vol. 50(3), pages 1114-1127, August.
    79. Ekici, Ali, 2013. "An improved model for supplier selection under capacity constraint and multiple criteria," International Journal of Production Economics, Elsevier, vol. 141(2), pages 574-581.
    80. Arts, Joachim & Kiesmüller, Gudrun P., 2013. "Analysis of a two-echelon inventory system with two supply modes," European Journal of Operational Research, Elsevier, vol. 225(2), pages 263-272.
    81. Dada, Maqbool & Petruzzi, Nicholas C. & Schwarz, Leroy B., 2003. "A Newsvendor Model with Unreliable Suppliers," Working Papers 03-0112, University of Illinois at Urbana-Champaign, College of Business.
    82. Zhang, Yi & Hua, Guowei & Wang, Shouyang & Zhang, Juliang & Fernandez, Vicenc, 2018. "Managing demand uncertainty: Probabilistic selling versus inventory substitution," International Journal of Production Economics, Elsevier, vol. 196(C), pages 56-67.
    83. Biswas, Indranil & Avittathur, Balram & Chatterjee, Ashis K, 2016. "Impact of structure, market share and information asymmetry on supply contracts for a single supplier multiple buyer network," European Journal of Operational Research, Elsevier, vol. 253(3), pages 593-601.
    84. Woo, Hong Seng & Saghiri, Soroosh, 2011. "Order assignment considering buyer, third-party logistics provider, and suppliers," International Journal of Production Economics, Elsevier, vol. 130(2), pages 144-152, April.
    85. Johansen, Søren Glud & Thorstenson, Anders, 2014. "Emergency orders in the periodic-review inventory system with fixed ordering costs and compound Poisson demand," International Journal of Production Economics, Elsevier, vol. 157(C), pages 147-157.
    86. Jing-Sheng Song & Paul Zipkin, 2009. "Inventories with Multiple Supply Sources and Networks of Queues with Overflow Bypasses," Management Science, INFORMS, vol. 55(3), pages 362-372, March.
    87. Jain, Tarun & Hazra, Jishnu, 2017. "Dual sourcing under suppliers' capacity investments," International Journal of Production Economics, Elsevier, vol. 183(PA), pages 103-115.
    88. Elodie Adida & Georgia Perakis, 2014. "The effect of supplier capacity on the supply chain profit," Annals of Operations Research, Springer, vol. 223(1), pages 1-52, December.
    89. Visani, Franco & Barbieri, Paolo & Di Lascio, F. Marta L. & Raffoni, Anna & Vigo, Daniele, 2016. "Supplier’s total cost of ownership evaluation: a data envelopment analysis approach," Omega, Elsevier, vol. 61(C), pages 141-154.
    90. Jaber, Mohamad Y. & El Saadany, Ahmed M.A., 2009. "The production, remanufacture and waste disposal model with lost sales," International Journal of Production Economics, Elsevier, vol. 120(1), pages 115-124, July.
    91. Sancak, Emre & Salman, F. Sibel, 2011. "Multi-item dynamic lot-sizing with delayed transportation policy," International Journal of Production Economics, Elsevier, vol. 131(2), pages 595-603, June.
    92. Konur, Dinçer & Campbell, James F. & Monfared, Sepideh A., 2017. "Economic and environmental considerations in a stochastic inventory control model with order splitting under different delivery schedules among suppliers," Omega, Elsevier, vol. 71(C), pages 46-65.
    93. Li, Lei & Zabinsky, Zelda B., 2011. "Incorporating uncertainty into a supplier selection problem," International Journal of Production Economics, Elsevier, vol. 134(2), pages 344-356, December.
    94. Mahadevan, B. & Hazra, Jishnu & Jain, Tarun, 2017. "Services outsourcing under asymmetric cost information," European Journal of Operational Research, Elsevier, vol. 257(2), pages 456-467.
    95. Dong, Chuanwen & Transchel, Sandra & Hoberg, Kai, 2018. "An inventory control model for modal split transport: A tailored base-surge approach," European Journal of Operational Research, Elsevier, vol. 264(1), pages 89-105.
    96. Christian Howard & Johan Marklund & Tarkan Tan & Ingrid Reijnen, 2015. "Inventory Control in a Spare Parts Distribution System with Emergency Stocks and Pipeline Information," Manufacturing & Service Operations Management, INFORMS, vol. 17(2), pages 142-156, May.
    97. Das, Kanchan, 2011. "Integrating effective flexibility measures into a strategic supply chain planning model," European Journal of Operational Research, Elsevier, vol. 211(1), pages 170-183, May.
    98. Karl Inderfurth & Peter Kelle & Rainer Kleber, 2011. "Dual Sourcing Using Capacity Reservation and Spot Market: Optimal Procurement Policy and Heuristic Parameter Determination," FEMM Working Papers 110014, Otto-von-Guericke University Magdeburg, Faculty of Economics and Management.
    99. Jaber, Mohamad Y. & El Saadany, Ahmed M.A., 2011. "An economic production and remanufacturing model with learning effects," International Journal of Production Economics, Elsevier, vol. 131(1), pages 115-127, May.
    100. Hua, N. Grace & Willems, Sean P., 2016. "Optimally configuring a two-stage serial line supply chain under the guaranteed service model," International Journal of Production Economics, Elsevier, vol. 181(PA), pages 98-106.

  47. G P Kiesmüller & S Minner, 2003. "Simple expressions for finding recovery system inventory control parameter values," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 54(1), pages 83-88, January.

    Cited by:

    1. Teunter, R.H. & van der Laan, E.A. & Vlachos, D., 2002. "Inventory strategies for systems with fast remanufacturing," ERIM Report Series Research in Management ERS-2002-77-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    2. van der Laan, Erwin A. & Teunter, Ruud H., 2006. "Simple heuristics for push and pull remanufacturing policies," European Journal of Operational Research, Elsevier, vol. 175(2), pages 1084-1102, December.
    3. Karl Inderfurth & Kampan Mukherjee, 2008. "Decision support for spare parts acquisition in post product life cycle," Central European Journal of Operations Research, Springer;Slovak Society for Operations Research;Hungarian Operational Research Society;Czech Society for Operations Research;Österr. Gesellschaft für Operations Research (ÖGOR);Slovenian Society Informatika - Section for Operational Research;Croatian Operational Research Society, vol. 16(1), pages 17-42, March.
    4. Fleischmann, M. & van Nunen, J.A.E.E. & Graeve, B., 2002. "Integrating Closed-loop Supply Chains and Spare Parts Management at IBM," ERIM Report Series Research in Management ERS-2002-107-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    5. Sean X. Zhou & Zhijie Tao & Xiuli Chao, 2011. "Optimal Control of Inventory Systems with Multiple Types of Remanufacturable Products," Manufacturing & Service Operations Management, INFORMS, vol. 13(1), pages 20-34, March.
    6. Gregory A. DeCroix & Jing-Sheng Song & Paul H. Zipkin, 2009. "Managing an Assemble-to-Order System with Returns," Manufacturing & Service Operations Management, INFORMS, vol. 11(1), pages 144-159, October.
    7. Gregory A. DeCroix, 2006. "Optimal Policy for a Multiechelon Inventory System with Remanufacturing," Operations Research, INFORMS, vol. 54(3), pages 532-543, June.
    8. Corbacıoğlu, U. & van der Laan, E.A., 2005. "Setting the holding cost rates in a multi-product system with remanufacturing," ERIM Report Series Research in Management ERS-2005-072-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    9. Behfard, S. & Al Hanbali, A. & van der Heijden, M.C. & Zijm, W.H.M., 2018. "Last Time Buy and repair decisions for fast moving parts," International Journal of Production Economics, Elsevier, vol. 197(C), pages 158-173.

  48. Kleber, Rainer & Minner, Stefan & Kiesmuller, Gudrun, 2002. "A continuous time inventory model for a product recovery system with multiple options," International Journal of Production Economics, Elsevier, vol. 79(2), pages 121-141, September.

    Cited by:

    1. Zhou, Li & Naim, Mohamed M. & Ou Tang & Towill, Denis R., 2006. "Dynamic performance of a hybrid inventory system with a Kanban policy in remanufacturing process," Omega, Elsevier, vol. 34(6), pages 585-598, December.
    2. Takahashi, Katsuhiko & Morikawa, Katsumi & Myreshka & Takeda, Daisuke & Mizuno, Akihiko, 2007. "Inventory control for a MARKOVIAN remanufacturing system with stochastic decomposition process," International Journal of Production Economics, Elsevier, vol. 108(1-2), pages 416-425, July.
    3. Felix T.S. Chan & Nan Li & S.H. Chung & Mozafar Saadat, 2017. "Management of sustainable manufacturing systems-a review on mathematical problems," International Journal of Production Research, Taylor & Francis Journals, vol. 55(4), pages 1210-1225, February.
    4. Gonzalez-Torre, Pilar L. & Adenso-Diaz, B. & Artiba, Hakim, 2004. "Environmental and reverse logistics policies in European bottling and packaging firms," International Journal of Production Economics, Elsevier, vol. 88(1), pages 95-104, March.
    5. Dobos, Imre & Richter, Knut, 2004. "An extended production/recycling model with stationary demand and return rates," International Journal of Production Economics, Elsevier, vol. 90(3), pages 311-323, August.
    6. Kara, S. & Rugrungruang, F. & Kaebernick, H., 2007. "Simulation modelling of reverse logistics networks," International Journal of Production Economics, Elsevier, vol. 106(1), pages 61-69, March.

  49. Minner, Stefan, 2001. "Strategic safety stocks in reverse logistics supply chains," International Journal of Production Economics, Elsevier, vol. 71(1-3), pages 417-428, May.

    Cited by:

    1. de Kok, Ton & Grob, Christopher & Laumanns, Marco & Minner, Stefan & Rambau, Jörg & Schade, Konrad, 2018. "A typology and literature review on stochastic multi-echelon inventory models," European Journal of Operational Research, Elsevier, vol. 269(3), pages 955-983.
    2. Li, Jianzhi & González, Miguel & Zhu, Yun, 2009. "A hybrid simulation optimization method for production planning of dedicated remanufacturing," International Journal of Production Economics, Elsevier, vol. 117(2), pages 286-301, February.
    3. Alvarez-Gil, M Jose & Berrone, Pascual & Husillos, F. Javier & Lado, Nora, 2007. "Reverse logistics, stakeholders' influence, organizational slack, and managers' posture," Journal of Business Research, Elsevier, vol. 60(5), pages 463-473, May.
    4. El Saadany, Ahmed M.A. & Jaber, Mohamad Y. & Bonney, Maurice, 2013. "How many times to remanufacture?," International Journal of Production Economics, Elsevier, vol. 143(2), pages 598-604.
    5. Grace Hua, N. & Willems, Sean P., 2016. "Analytical insights into two-stage serial line supply chain safety stock," International Journal of Production Economics, Elsevier, vol. 181(PA), pages 107-112.
    6. Qiang, Qiang & Ke, Ke & Anderson, Trisha & Dong, June, 2013. "The closed-loop supply chain network with competition, distribution channel investment, and uncertainties," Omega, Elsevier, vol. 41(2), pages 186-194.
    7. Mitra, Subrata, 2009. "Analysis of a two-echelon inventory system with returns," Omega, Elsevier, vol. 37(1), pages 106-115, February.
    8. Askin, Ronald G. & Krishnan, Shravan, 2009. "Defining inventory control points in multiproduct stochastic pull systems," International Journal of Production Economics, Elsevier, vol. 120(2), pages 418-429, August.
    9. John Khawam & Warren H. Hausman & Dinah W. Cheng, 2007. "Warranty Inventory Optimization for Hitachi Global Storage Technologies, Inc," Interfaces, INFORMS, vol. 37(5), pages 455-471, October.
    10. Cheng-Min Feng & Chia-Hui Chang, 2008. "Empty container reposition planning for intra-Asia liner shipping," Maritime Policy & Management, Taylor & Francis Journals, vol. 35(5), pages 469-489, October.
    11. Wilcox, William & Horvath, Philip A. & Griffis, Stanley E. & Autry, Chad W., 2011. "A Markov model of liquidity effects in reverse logistics processes: The effects of random volume and passage," International Journal of Production Economics, Elsevier, vol. 129(1), pages 86-101, January.
    12. Gonzalez-Torre, Pilar L. & Adenso-Diaz, B. & Artiba, Hakim, 2004. "Environmental and reverse logistics policies in European bottling and packaging firms," International Journal of Production Economics, Elsevier, vol. 88(1), pages 95-104, March.
    13. García-Rodríguez, Francisco J. & Castilla-Gutiérrez, Carlos & Bustos-Flores, Carlos, 2013. "Implementation of reverse logistics as a sustainable tool for raw material purchasing in developing countries: The case of Venezuela," International Journal of Production Economics, Elsevier, vol. 141(2), pages 582-592.
    14. Jorge E. Hernández & Raúl Poler & Josefa Mula & Francisco C. Lario, 2011. "The Reverse Logistic Process of an Automobile Supply Chain Network Supported by a Collaborative Decision-Making Model," Group Decision and Negotiation, Springer, vol. 20(1), pages 79-114, January.
    15. Eruguz, Ayse Sena & Sahin, Evren & Jemai, Zied & Dallery, Yves, 2016. "A comprehensive survey of guaranteed-service models for multi-echelon inventory optimization," International Journal of Production Economics, Elsevier, vol. 172(C), pages 110-125.
    16. Lado, Nora & Husillos, F. Javier & Berrone, Pascual Alberto & Álvarez Gil, María Joséfa, 2005. "The explanatory power of trust and commitment and stakeholders' salience : their influence on the reverse logistics programs performance," DEE - Working Papers. Business Economics. WB wb050303, Universidad Carlos III de Madrid. Departamento de Economía de la Empresa.
    17. Kara, S. & Rugrungruang, F. & Kaebernick, H., 2007. "Simulation modelling of reverse logistics networks," International Journal of Production Economics, Elsevier, vol. 106(1), pages 61-69, March.

  50. Inderfurth, Karl & Minner, Stefan, 1998. "Safety stocks in multi-stage inventory systems under different service measures," European Journal of Operational Research, Elsevier, vol. 106(1), pages 57-73, April.

    Cited by:

    1. de Kok, Ton & Grob, Christopher & Laumanns, Marco & Minner, Stefan & Rambau, Jörg & Schade, Konrad, 2018. "A typology and literature review on stochastic multi-echelon inventory models," European Journal of Operational Research, Elsevier, vol. 269(3), pages 955-983.
    2. Vincent Giard & Mustapha Sali, 2012. "Monitoring of the upstream part of a supply chain dedicated to the customized mass production with a revisited version of MRP," Working Papers hal-00875498, HAL.
    3. Amini, Mehdi & Li, Haitao, 2011. "Supply chain configuration for diffusion of new products: An integrated optimization approach," Omega, Elsevier, vol. 39(3), pages 313-322, June.
    4. Minner, Stefan, 2001. "Strategic safety stocks in reverse logistics supply chains," International Journal of Production Economics, Elsevier, vol. 71(1-3), pages 417-428, May.
    5. Vincent Giard & Mustapha Sali, 2012. "Pilotage d'une chaîne logistique par une approche de type MRP dans un environnement partiellement aléatoire," Working Papers hal-00875497, HAL.
    6. Vincent Giard & Mustapha Sali, 2011. "Production à la commande et production pour stock dans un environnement MRP," Working Papers hal-00875557, HAL.
    7. Kevin H. Shang & Jing-Sheng Song, 2006. "A Closed-Form Approximation for Serial Inventory Systems and Its Application to System Design," Manufacturing & Service Operations Management, INFORMS, vol. 8(4), pages 394-406, September.
    8. Stephen C. Graves & Sean P. Willems, 2000. "Optimizing Strategic Safety Stock Placement in Supply Chains," Manufacturing & Service Operations Management, INFORMS, vol. 2(1), pages 68-83, June.
    9. Schuster Puga, Matías & Minner, Stefan & Tancrez, Jean-Sébastien, 2019. "Two-stage supply chain design with safety stock placement decisions," International Journal of Production Economics, Elsevier, vol. 209(C), pages 183-193.
    10. Funaki, Kenichi, 2012. "Strategic safety stock placement in supply chain design with due-date based demand," International Journal of Production Economics, Elsevier, vol. 135(1), pages 4-13.
    11. Askin, Ronald G. & Krishnan, Shravan, 2009. "Defining inventory control points in multiproduct stochastic pull systems," International Journal of Production Economics, Elsevier, vol. 120(2), pages 418-429, August.
    12. Hong, Zhaofu & Dai, Wei & Luh, Hsing & Yang, Chenchen, 2018. "Optimal configuration of a green product supply chain with guaranteed service time and emission constraints," European Journal of Operational Research, Elsevier, vol. 266(2), pages 663-677.
    13. Albrecht, Martin, 2014. "Determining near optimal base-stock levels in two-stage general inventory systems," European Journal of Operational Research, Elsevier, vol. 232(2), pages 342-349.
    14. Jörn Grahl & Stefan Minner & Daniel Dittmar, 2016. "Meta-heuristics for placing strategic safety stock in multi-echelon inventory with differentiated service times," Annals of Operations Research, Springer, vol. 242(2), pages 489-504, July.
    15. Salal Humair & Sean P. Willems, 2006. "Optimizing Strategic Safety Stock Placement in Supply Chains with Clusters of Commonality," Operations Research, INFORMS, vol. 54(4), pages 725-742, August.
    16. Osman, Hany & Demirli, Kudret, 2012. "Integrated safety stock optimization for multiple sourced stockpoints facing variable demand and lead time," International Journal of Production Economics, Elsevier, vol. 135(1), pages 299-307.
    17. Rafiei, Rezvan & Nourelfath, Mustapha & Gaudreault, Jonathan & De Santa-Eulalia, Luis Antonio & Bouchard, Mathieu, 2015. "Dynamic safety stock in co-production demand-driven wood remanufacturing mills: A case study," International Journal of Production Economics, Elsevier, vol. 165(C), pages 90-99.
    18. Eruguz, Ayse Sena & Sahin, Evren & Jemai, Zied & Dallery, Yves, 2016. "A comprehensive survey of guaranteed-service models for multi-echelon inventory optimization," International Journal of Production Economics, Elsevier, vol. 172(C), pages 110-125.
    19. Kaminsky, Philip & Kaya, Onur, 2008. "Inventory positioning, scheduling and lead-time quotation in supply chains," International Journal of Production Economics, Elsevier, vol. 114(1), pages 276-293, July.
    20. Ramesh Bollapragada & Uday S. Rao & Jun Zhang, 2004. "Managing Inventory and Supply Performance in Assembly Systems with Random Supply Capacity and Demand," Management Science, INFORMS, vol. 50(12), pages 1729-1743, December.

IDEAS is a RePEc service hosted by the Research Division of the Federal Reserve Bank of St. Louis . RePEc uses bibliographic data supplied by the respective publishers.