IDEAS home Printed from https://ideas.repec.org/e/c/pva64.html
   My authors  Follow this author

Erwin van der Laan

(deceased)

Citations

Many of the citations below have been collected in an experimental project, CitEc, where a more detailed citation analysis can be found. These are citations from works listed in RePEc that could be analyzed mechanically. So far, only a minority of all works could be analyzed. See under "Corrections" how you can help improve the citation analysis.

Working papers

  1. Pourakbar, M. & van der Laan, E.A. & Dekker, R., 2011. "End-of-Life Inventory Problem with Phase-out Returns," Econometric Institute Research Papers EI 2011-12, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.

    Cited by:

    1. Hu, Qiwei & Boylan, John E. & Chen, Huijing & Labib, Ashraf, 2018. "OR in spare parts management: A review," European Journal of Operational Research, Elsevier, vol. 266(2), pages 395-414.
    2. Saurin, Tarcisio Abreu & Werle, Natalia Jaeger Basso, 2017. "A framework for the analysis of slack in socio-technical systems," Reliability Engineering and System Safety, Elsevier, vol. 167(C), pages 439-451.
    3. Ozyoruk, Emin & Erkip, Nesim Kohen & Ararat, Çağın, 2022. "End-of-life inventory management problem: Results and insights," International Journal of Production Economics, Elsevier, vol. 243(C).
    4. Tianji Yang & Chao Fu & Xinbao Liu & Jun Pei & Lin Liu & Panos M. Pardalos, 2018. "Closed-loop supply chain inventory management with recovery information of reusable containers," Journal of Combinatorial Optimization, Springer, vol. 35(1), pages 266-292, January.
    5. Mabel C. Chou & Chee-Khian Sim & Xue-Ming Yuan, 2020. "Policies for inventory models with product returns forecast from past demands and past sales," Annals of Operations Research, Springer, vol. 288(1), pages 137-180, May.
    6. Pourakbar, M. & Dekker, R., 2011. "Customer Differentiated End-of-Life Inventory Problem," Econometric Institute Research Papers EI 2011-21, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    7. Behfard, S. & Al Hanbali, A. & van der Heijden, M.C. & Zijm, W.H.M., 2018. "Last Time Buy and repair decisions for fast moving parts," International Journal of Production Economics, Elsevier, vol. 197(C), pages 158-173.
    8. Behfard, S. & van der Heijden, M.C. & Al Hanbali, A. & Zijm, W.H.M., 2015. "Last time buy and repair decisions for spare parts," European Journal of Operational Research, Elsevier, vol. 244(2), pages 498-510.
    9. J. B. G. Frenk & Canan Pehlivan & Semih O. Sezer, 2019. "Order and exit decisions under non-increasing price curves for products with short life cycles," Mathematical Methods of Operations Research, Springer;Gesellschaft für Operations Research (GOR);Nederlands Genootschap voor Besliskunde (NGB), vol. 90(3), pages 365-397, December.
    10. van der Heijden, Matthieu & Iskandar, Bermawi P., 2013. "Last time buy decisions for products sold under warranty," European Journal of Operational Research, Elsevier, vol. 224(2), pages 302-312.
    11. Zaarour, Nizar & Melachrinoudis, Emanuel & Solomon, Marius M., 2016. "Maximizing revenue of end of life items in retail stores," European Journal of Operational Research, Elsevier, vol. 255(1), pages 133-141.

  2. Koppius, O.R. & Ozdemir, O. & van der Laan, E.A., 2011. "Beyond Waste Reduction: Creating Value with Information Systems in Closed-Loop Supply Chains," ERIM Report Series Research in Management ERS-2011-024-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.

    Cited by:

    1. Marco Pesce & Ilaria Tamai & Deyan Guo & Andrea Critto & Daniele Brombal & Xiaohui Wang & Hongguang Cheng & Antonio Marcomini, 2020. "Circular Economy in China: Translating Principles into Practice," Sustainability, MDPI, vol. 12(3), pages 1-31, January.
    2. Kasper P.H. Lange & Gijsbert Korevaar & Inge F. Oskam & Paulien M. Herder, 2017. "Developing and Understanding Design Interventions in Relation to Industrial Symbiosis Dynamics," Sustainability, MDPI, vol. 9(5), pages 1-14, May.

  3. Krikke, H.R. & van der Laan, E., 2009. "Last Time Buy and Control Policies With Phase-Out Returns : A Case Study in Plant Control Systems," Discussion Paper 2009-66, Tilburg University, Center for Economic Research.

    Cited by:

    1. Dekker, R. & Pinçe, C. & Zuidwijk, R.A. & Jalil, M.N., 2010. "On the use of installed base information for spare parts logistics: a revieuw of ideas and industry practice," Econometric Institute Research Papers EI 2010-73, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    2. Pourakbar, M. & Dekker, R., 2011. "Customer Differentiated End-of-Life Inventory Problem," Econometric Institute Research Papers EI 2011-21, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    3. Behfard, S. & van der Heijden, M.C. & Al Hanbali, A. & Zijm, W.H.M., 2015. "Last time buy and repair decisions for spare parts," European Journal of Operational Research, Elsevier, vol. 244(2), pages 498-510.
    4. Pourakbar, M. & van der Laan, E.A. & Dekker, R., 2011. "End-of-Life Inventory Problem with Phase-out Returns," Econometric Institute Research Papers EI 2011-12, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    5. van der Heijden, Matthieu & Iskandar, Bermawi P., 2013. "Last time buy decisions for products sold under warranty," European Journal of Operational Research, Elsevier, vol. 224(2), pages 302-312.
    6. Dwayne Cole & Burak Kazaz & Scott Webster, 2016. "Final purchase and trade-in decisions in response to a component phase-out announcement: a deterministic analysis," International Journal of Production Research, Taylor & Francis Journals, vol. 54(5), pages 1257-1272, March.

  4. de Brito, M.P. & van der Laan, E.A. & Irion, B.D., 2007. "Extended Producer Responsibility in the Aviation Sector," ERIM Report Series Research in Management ERS-2007-025-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.

    Cited by:

    1. Jain, K.P. & Pruyn, J.F.J. & Hopman, J.J., 2016. "Quantitative assessment of material composition of end-of-life ships using onboard documentation," Resources, Conservation & Recycling, Elsevier, vol. 107(C), pages 1-9.

  5. van der Laan, E.A. & de Brito, M.P. & Vermaesen, S.C., 2007. "Logistics Information and Knowledge Management Issues in Humanitarian Aid Organizations," ERIM Report Series Research in Management ERS-2007-026-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.

    Cited by:

    1. Chandes, Jérôme & Paché, Gilles, 2009. "To Ponder On The Collective Actions In The Context Of Humanitarian Logistics: Lessons From The Earthquake In Pisco," Journal of Economics, Finance and Administrative Science, Universidad ESAN, vol. 14(27), pages 47-61.

  6. Ketzenberg, M.E. & van der Laan, E.A. & Teunter, R.H., 2004. "The Value of Information in Reverse Logistics," ERIM Report Series Research in Management ERS-2004-053-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.

    Cited by:

    1. Talay, Işılay & Özdemir-Akyıldırım, Öznur, 2019. "Optimal procurement and production planning for multi-product multi-stage production under yield uncertainty," European Journal of Operational Research, Elsevier, vol. 275(2), pages 536-551.
    2. Nenes, George & Panagiotidou, Sofia & Dekker, Rommert, 2010. "Inventory control policies for inspection and remanufacturing of returns: A case study," International Journal of Production Economics, Elsevier, vol. 125(2), pages 300-312, June.

  7. van der Laan, E.A. & Teunter, R.H., 2004. "Simple heuristics for push and pull remanufacturing policies," Econometric Institute Research Papers EI 2004-34, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.

    Cited by:

    1. Zolfagharinia, Hossein & Hafezi, Maryam & Farahani, Reza Zanjirani & Fahimnia, Behnam, 2014. "A hybrid two-stock inventory control model for a reverse supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 67(C), pages 141-161.
    2. Hamza Boudhar & Mohammed Dahane & Nidhal Rezg, 2017. "New dynamic heuristic for the optimization of opportunities to use new and remanufactured spare part in stochastic degradation context," Journal of Intelligent Manufacturing, Springer, vol. 28(2), pages 437-454, February.
    3. Kilic, Onur A. & Tunc, Huseyin, 2019. "Heuristics for the stochastic economic lot sizing problem with remanufacturing under backordering costs," European Journal of Operational Research, Elsevier, vol. 276(3), pages 880-892.
    4. Hsueh, Che-Fu, 2011. "An inventory control model with consideration of remanufacturing and product life cycle," International Journal of Production Economics, Elsevier, vol. 133(2), pages 645-652, October.
    5. Ramani, Vinay & De Giovanni, Pietro, 2017. "A two-period model of product cannibalization in an atypical Closed-loop Supply Chain with endogenous returns: The case of DellReconnect," European Journal of Operational Research, Elsevier, vol. 262(3), pages 1009-1027.
    6. Kilic, Onur A. & Tunc, Huseyin & Tarim, S. Armagan, 2018. "Heuristic policies for the stochastic economic lot sizing problem with remanufacturing under service level constraints," European Journal of Operational Research, Elsevier, vol. 267(3), pages 1102-1109.
    7. Mathijn Retel Helmrich & Raf Jans & Wilco van den Heuvel & Albert Wagelmans, 2014. "Economic lot-sizing with remanufacturing: complexity and efficient formulations," IISE Transactions, Taylor & Francis Journals, vol. 46(1), pages 67-86.
    8. Kim, Eungab & Saghafian, Soroush & Van Oyen, Mark P., 2013. "Joint control of production, remanufacturing, and disposal activities in a hybrid manufacturing–remanufacturing system," European Journal of Operational Research, Elsevier, vol. 231(2), pages 337-348.
    9. Fei Zhang & Zailin Guan & Li Zhang & Yanyan Cui & Pengxing Yi & Saif Ullah, 2019. "Inventory management for a remanufacture-to-order production with multi-components (parts)," Journal of Intelligent Manufacturing, Springer, vol. 30(1), pages 59-78, January.
    10. Mabel C. Chou & Chee-Khian Sim & Xue-Ming Yuan, 2020. "Policies for inventory models with product returns forecast from past demands and past sales," Annals of Operations Research, Springer, vol. 288(1), pages 137-180, May.
    11. Mohammed Dahane & M’hammed Sahnoun & Belgacem Bettayeb & David Baudry & Hamza Boudhar, 2017. "Impact of spare parts remanufacturing on the operation and maintenance performance of offshore wind turbines: a multi-agent approach," Journal of Intelligent Manufacturing, Springer, vol. 28(7), pages 1531-1549, October.
    12. Behfard, S. & Al Hanbali, A. & van der Heijden, M.C. & Zijm, W.H.M., 2018. "Last Time Buy and repair decisions for fast moving parts," International Journal of Production Economics, Elsevier, vol. 197(C), pages 158-173.
    13. Sebnem Ahiska, S. & King, Russell E., 2010. "Inventory optimization in a one product recoverable manufacturing system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 11-19, March.
    14. Konstantaras, I. & Skouri, K., 2010. "Lot sizing for a single product recovery system with variable setup numbers," European Journal of Operational Research, Elsevier, vol. 203(2), pages 326-335, June.
    15. Huynh, Candice H. & So, Kut C. & Gurnani, Haresh, 2016. "Managing a closed-loop supply system with random returns and a cyclic delivery schedule," European Journal of Operational Research, Elsevier, vol. 255(3), pages 787-796.
    16. Feng, Yan & Viswanathan, S., 2014. "Heuristics with guaranteed performance bounds for a manufacturing system with product recovery," European Journal of Operational Research, Elsevier, vol. 232(2), pages 322-329.
    17. Ahiska, S. Sebnem & King, Russell E., 2010. "Life cycle inventory policy characterizations for a single-product recoverable system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 51-61, March.
    18. Lin, Junyi & Zhou, Li & Spiegler, Virginia L.M. & Naim, Mohamed M. & Syntetos, Aris, 2022. "Push or Pull? The impact of ordering policy choice on the dynamics of a hybrid closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 300(1), pages 282-295.
    19. Kaya, Onur, 2010. "Incentive and production decisions for remanufacturing operations," European Journal of Operational Research, Elsevier, vol. 201(2), pages 442-453, March.
    20. Vercraene, Samuel & Gayon, Jean-Philippe & Flapper, Simme Douwe, 2014. "Coordination of manufacturing, remanufacturing and returns acceptance in hybrid manufacturing/remanufacturing systems," International Journal of Production Economics, Elsevier, vol. 148(C), pages 62-70.
    21. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    22. Haolan Liao & Qianwang Deng & Yuanrui Wang, 2017. "Optimal Acquisition and Production Policy for End-of-Life Engineering Machinery Recovering in a Joint Manufacturing/Remanufacturing System under Uncertainties in Procurement and Demand," Sustainability, MDPI, vol. 9(3), pages 1-19, February.
    23. Dev, Navin K. & Shankar, Ravi & Choudhary, Alok, 2017. "Strategic design for inventory and production planning in closed-loop hybrid systems," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 345-353.

  8. Toktay, B. & van der Laan, E.A. & de Brito, M.P., 2003. "Managing Product Returns: The Role of Forecasting," ERIM Report Series Research in Management ERS-2003-023-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.

    Cited by:

    1. Nowak, Thomas & Hofer, Vera, 2014. "On stabilizing volatile product returns," European Journal of Operational Research, Elsevier, vol. 234(3), pages 701-708.
    2. Petropoulos, Fotios & Apiletti, Daniele & Assimakopoulos, Vassilios & Babai, Mohamed Zied & Barrow, Devon K. & Ben Taieb, Souhaib & Bergmeir, Christoph & Bessa, Ricardo J. & Bijak, Jakub & Boylan, Joh, 2022. "Forecasting: theory and practice," International Journal of Forecasting, Elsevier, vol. 38(3), pages 705-871.
      • Fotios Petropoulos & Daniele Apiletti & Vassilios Assimakopoulos & Mohamed Zied Babai & Devon K. Barrow & Souhaib Ben Taieb & Christoph Bergmeir & Ricardo J. Bessa & Jakub Bijak & John E. Boylan & Jet, 2020. "Forecasting: theory and practice," Papers 2012.03854, arXiv.org, revised Jan 2022.
    3. Tsiliyannis, Christos Aristeides, 2018. "Markov chain modeling and forecasting of product returns in remanufacturing based on stock mean-age," European Journal of Operational Research, Elsevier, vol. 271(2), pages 474-489.
    4. de Brito, M.P. & van der Laan, E.A., 2003. "Inventory Management with product returns: the value of information," ERIM Report Series Research in Management ERS-2003-060-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    5. M N Jalil & R A Zuidwijk & M Fleischmann & Jo A E E van Nunen, 2011. "Spare parts logistics and installed base information," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 62(3), pages 442-457, March.
    6. Ene, Seval & Öztürk, Nursel, 2017. "Grey modelling based forecasting system for return flow of end-of-life vehicles," Technological Forecasting and Social Change, Elsevier, vol. 115(C), pages 155-166.
    7. Srivastava, Samir K., 2008. "Network design for reverse logistics," Omega, Elsevier, vol. 36(4), pages 535-548, August.
    8. El Kihal, Siham & Nurullayev, Namig & Schulze, Christian & Skiera, Bernd, 2021. "A Comparison of Return Rate Calculation Methods: Evidence from 16 Retailers," Journal of Retailing, Elsevier, vol. 97(4), pages 676-696.
    9. Jalil, M.N. & Zuidwijk, R.A. & Fleischmann, M. & van Nunen, J.A.E.E., 2009. "Spare Parts Logistics and Installed Base Information," ERIM Report Series Research in Management ERS-2009-002-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    10. Arroyo López Pilar & Villanueva Bringas Mariana & Gaytán Iniestra Juan & García Vargas Marco, 2014. "Simulación de la tasa de reciclaje de productos electrónicos Un modelo de dinámica de sistemas para la red de logística inversa," Contaduría y Administración, Accounting and Management, vol. 59(1), pages 9-41, enero-mar.
    11. de Brito, M.P. & Dekker, R., 2003. "A Framework for Reverse Logistics," ERIM Report Series Research in Management ERS-2003-045-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    12. Agrawal, Saurabh & Singh, Rajesh K. & Murtaza, Qasim, 2015. "A literature review and perspectives in reverse logistics," Resources, Conservation & Recycling, Elsevier, vol. 97(C), pages 76-92.

  9. de Brito, M.P. & van der Laan, E.A., 2003. "Inventory Management with product returns: the value of information," ERIM Report Series Research in Management ERS-2003-060-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.

    Cited by:

    1. Abdelkader Sbihi & Richard Eglese, 2010. "Combinatorial optimization and Green Logistics," Annals of Operations Research, Springer, vol. 175(1), pages 159-175, March.

  10. Teunter, R.H. & van der Laan, E.A., 2003. "Valuation of inventories in systems with product recovery," Econometric Institute Research Papers EI 2003-29, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.

    Cited by:

    1. de Brito, M.P. & Dekker, R., 2003. "A Framework for Reverse Logistics," ERIM Report Series Research in Management ERS-2003-045-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.

  11. de Brito, M.P. & van der Laan, E.A., 2002. "Inventory control with product returns: the impact of (mis)information," Econometric Institute Research Papers EI 2002-29, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.

    Cited by:

    1. de Brito, M.P. & van der Laan, E.A., 2003. "Inventory Management with product returns: the value of information," ERIM Report Series Research in Management ERS-2003-060-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    2. de Brito, M.P. & Dekker, R. & Flapper, S.D.P., 2003. "Reverse Logistics - a review of case studies," ERIM Report Series Research in Management ERS-2003-012-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    3. Ketzenberg, M.E. & van der Laan, E.A. & Teunter, R.H., 2004. "The Value of Information in Reverse Logistics," ERIM Report Series Research in Management ERS-2004-053-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    4. Toktay, B. & van der Laan, E.A. & de Brito, M.P., 2003. "Managing Product Returns: The Role of Forecasting," ERIM Report Series Research in Management ERS-2003-023-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.

  12. Teunter, R.H. & van der Laan, E.A. & Vlachos, D., 2002. "Inventory strategies for systems with fast remanufacturing," ERIM Report Series Research in Management ERS-2002-77-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.

    Cited by:

    1. van der Laan, E.A. & Teunter, R.H., 2004. "Simple heuristics for push and pull remanufacturing policies," Econometric Institute Research Papers EI 2004-34, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    2. Flapper, Simme Douwe & Gayon, Jean-Philippe & Lim, Lâm Laurent, 2014. "On the optimal control of manufacturing and remanufacturing activities with a single shared server," European Journal of Operational Research, Elsevier, vol. 234(1), pages 86-98.
    3. Li, Wei & Sun, Hui & Dong, Hao & Gan, Yuqin & Koh, Lenny, 2023. "Outsourcing decision-making in global remanufacturing supply chains: The impact of tax and tariff regulations," European Journal of Operational Research, Elsevier, vol. 304(3), pages 997-1010.
    4. Kim, Eungab & Saghafian, Soroush & Van Oyen, Mark P., 2013. "Joint control of production, remanufacturing, and disposal activities in a hybrid manufacturing–remanufacturing system," European Journal of Operational Research, Elsevier, vol. 231(2), pages 337-348.
    5. Gregory A. DeCroix, 2006. "Optimal Policy for a Multiechelon Inventory System with Remanufacturing," Operations Research, INFORMS, vol. 54(3), pages 532-543, June.
    6. Corbacioglu, Umut & van der Laan, Erwin A., 2007. "Setting the holding cost rates in a two-product system with remanufacturing," International Journal of Production Economics, Elsevier, vol. 109(1-2), pages 185-194, September.
    7. Cai, Xiaoqiang & Lai, Minghui & Li, Xiang & Li, Yongjian & Wu, Xianyi, 2014. "Optimal acquisition and production policy in a hybrid manufacturing/remanufacturing system with core acquisition at different quality levels," European Journal of Operational Research, Elsevier, vol. 233(2), pages 374-382.
    8. Tang, Ou & Grubbstrom, Robert W. & Zanoni, Simone, 2007. "Planned lead time determination in a make-to-order remanufacturing system," International Journal of Production Economics, Elsevier, vol. 108(1-2), pages 426-435, July.
    9. Nativi, Juan Jose & Lee, Seokcheon, 2012. "Impact of RFID information-sharing strategies on a decentralized supply chain with reverse logistics operations," International Journal of Production Economics, Elsevier, vol. 136(2), pages 366-377.
    10. Ponte, Borja & Cannella, Salvatore & Dominguez, Roberto & Naim, Mohamed M. & Syntetos, Aris A., 2021. "Quality grading of returns and the dynamics of remanufacturing," International Journal of Production Economics, Elsevier, vol. 236(C).
    11. Chen, Jen-Ming & Chang, Chia-I, 2012. "The co-opetitive strategy of a closed-loop supply chain with remanufacturing," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 48(2), pages 387-400.
    12. Corbacıoğlu, U. & van der Laan, E.A., 2005. "Setting the holding cost rates in a multi-product system with remanufacturing," ERIM Report Series Research in Management ERS-2005-072-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    13. Mukhopadhyay, Samar K. & Ma, Huafan, 2009. "Joint procurement and production decisions in remanufacturing under quality and demand uncertainty," International Journal of Production Economics, Elsevier, vol. 120(1), pages 5-17, July.

  13. van der Laan, E.A. & Kiesmueller, G.P., 2001. "An Inventory Model with Dependent Product Demands and Returns," ERIM Report Series Research in Management ERS-2001-16-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.

    Cited by:

    1. Bernard, Sophie, 2011. "Remanufacturing," Journal of Environmental Economics and Management, Elsevier, vol. 62(3), pages 337-351.
    2. Eric T. Anderson & Karsten Hansen & Duncan Simester, 2009. "The Option Value of Returns: Theory and Empirical Evidence," Marketing Science, INFORMS, vol. 28(3), pages 405-423, 05-06.
    3. Zhou, Li & Naim, Mohamed M. & Ou Tang & Towill, Denis R., 2006. "Dynamic performance of a hybrid inventory system with a Kanban policy in remanufacturing process," Omega, Elsevier, vol. 34(6), pages 585-598, December.
    4. Tang, Ou & Grubbstrom, Robert W., 2005. "Considering stochastic lead times in a manufacturing/remanufacturing system with deterministic demands and returns," International Journal of Production Economics, Elsevier, vol. 93(1), pages 285-300, January.
    5. Zolfagharinia, Hossein & Hafezi, Maryam & Farahani, Reza Zanjirani & Fahimnia, Behnam, 2014. "A hybrid two-stock inventory control model for a reverse supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 67(C), pages 141-161.
    6. Gregory DeCroix & Jing-Sheng Song & Paul Zipkin, 2005. "A Series System with Returns: Stationary Analysis," Operations Research, INFORMS, vol. 53(2), pages 350-362, April.
    7. Hsueh, Che-Fu, 2011. "An inventory control model with consideration of remanufacturing and product life cycle," International Journal of Production Economics, Elsevier, vol. 133(2), pages 645-652, October.
    8. Zhou, Li & Xie, Jiaping & Gu, Xiaoyu & Lin, Yong & Ieromonachou, Petros & Zhang, Xiaole, 2016. "Forecasting return of used products for remanufacturing using Graphical Evaluation and Review Technique (GERT)," International Journal of Production Economics, Elsevier, vol. 181(PB), pages 315-324.
    9. Tsiliyannis, Christos Aristeides, 2018. "Markov chain modeling and forecasting of product returns in remanufacturing based on stock mean-age," European Journal of Operational Research, Elsevier, vol. 271(2), pages 474-489.
    10. de Brito, M.P. & Dekker, R., 2001. "Modelling product returns in inventory control - exploring the validity or general assumptions," Econometric Institute Research Papers EI 2001-27, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    11. Jing Chen & Bintong Chen, 2016. "Competing with customer returns policies," International Journal of Production Research, Taylor & Francis Journals, vol. 54(7), pages 2093-2107, April.
    12. W-K Ching & W-O Yuen & A W Loh, 2003. "An inventory model with returns and lateral transshipments," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 54(6), pages 636-641, June.
    13. Gregory A. DeCroix, 2006. "Optimal Policy for a Multiechelon Inventory System with Remanufacturing," Operations Research, INFORMS, vol. 54(3), pages 532-543, June.
    14. Patricia Rogetzer & Lena Silbermayr & Werner Jammernegg, 2018. "Sustainable sourcing of strategic raw materials by integrating recycled materials," Flexible Services and Manufacturing Journal, Springer, vol. 30(3), pages 421-451, September.
    15. Z P Bayındır & N Erkip & R Güllü, 2005. "Assessing the benefits of remanufacturing option under one-way substitution," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(3), pages 286-296, March.
    16. Mabel C. Chou & Chee-Khian Sim & Xue-Ming Yuan, 2020. "Policies for inventory models with product returns forecast from past demands and past sales," Annals of Operations Research, Springer, vol. 288(1), pages 137-180, May.
    17. Toyin Clottey, 2016. "Development and evaluation of a rolling horizon purchasing policy for cores," International Journal of Production Research, Taylor & Francis Journals, vol. 54(9), pages 2780-2790, May.
    18. Gökbayrak, Esra & Kayış, Enis, 2023. "Single item periodic review inventory control with sales dependent stochastic return flows," International Journal of Production Economics, Elsevier, vol. 255(C).
    19. Atamer, Büşra & Bakal, İsmail S. & Bayındır, Z. Pelin, 2013. "Optimal pricing and production decisions in utilizing reusable containers," International Journal of Production Economics, Elsevier, vol. 143(2), pages 222-232.
    20. Wenting Pan & Candice H. Huynh, 2023. "Optimal operational strategies for online retailers with demand and return uncertainty," Operations Management Research, Springer, vol. 16(2), pages 755-767, June.
    21. Gong, Qiguo & Lai, K.K. & Wang, Shouyang, 2008. "Supply chain networks: Closed Jackson network models and properties," International Journal of Production Economics, Elsevier, vol. 113(2), pages 567-574, June.
    22. Achal Bassamboo & Sunil Kumar & Ramandeep S. Randhawa, 2009. "Dynamics of New Product Introduction in Closed Rental Systems," Operations Research, INFORMS, vol. 57(6), pages 1347-1359, December.
    23. P-S You, 2003. "Dynamic pricing of inventory with cancellation demand," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 54(10), pages 1093-1101, October.
    24. Andre P. Calmon & Stephen C. Graves, 2017. "Inventory Management in a Consumer Electronics Closed-Loop Supply Chain," Manufacturing & Service Operations Management, INFORMS, vol. 19(4), pages 568-585, October.
    25. Yongjian Li & Xiaoqiang Cai & Lei Xu & Wenxia Yang, 2016. "Heuristic approach on dynamic lot-sizing model for durable products with end-of-use constraints," Annals of Operations Research, Springer, vol. 242(2), pages 265-283, July.
    26. Goedhart, Joost & Haijema, René & Akkerman, Renzo, 2023. "Modelling the influence of returns for an omni-channel retailer," European Journal of Operational Research, Elsevier, vol. 306(3), pages 1248-1263.
    27. Nenes, George & Panagiotidou, Sofia & Dekker, Rommert, 2010. "Inventory control policies for inspection and remanufacturing of returns: A case study," International Journal of Production Economics, Elsevier, vol. 125(2), pages 300-312, June.
    28. Takahashi, Katsuhiko & Morikawa, Katsumi & Myreshka & Takeda, Daisuke & Mizuno, Akihiko, 2007. "Inventory control for a MARKOVIAN remanufacturing system with stochastic decomposition process," International Journal of Production Economics, Elsevier, vol. 108(1-2), pages 416-425, July.
    29. Dijkstra, Arjan S. & Van der Heide, Gerlach & Roodbergen, Kees Jan, 2019. "Transshipments of cross-channel returned products," International Journal of Production Economics, Elsevier, vol. 209(C), pages 70-77.
    30. Gregory A. DeCroix & Paul H. Zipkin, 2005. "Inventory Management for an Assembly System with Product or Component Returns," Management Science, INFORMS, vol. 51(8), pages 1250-1265, August.
    31. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    32. Toktay, B. & van der Laan, E.A. & de Brito, M.P., 2003. "Managing Product Returns: The Role of Forecasting," ERIM Report Series Research in Management ERS-2003-023-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    33. Zerhouni, Hichem & Gayon, Jean-Philippe & Frein, Yannick, 2013. "Influence of dependency between demands and returns in a reverse logistics system," International Journal of Production Economics, Elsevier, vol. 143(1), pages 62-71.

  14. van der Laan, E.A., 2000. "An NPV and AC Analysis of a Stochastic Inventory System with Joint Manufacturing and Remanufacturing," ERIM Report Series Research in Management ERS-2000-38-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.

    Cited by:

    1. Zhou, Li & Naim, Mohamed M. & Ou Tang & Towill, Denis R., 2006. "Dynamic performance of a hybrid inventory system with a Kanban policy in remanufacturing process," Omega, Elsevier, vol. 34(6), pages 585-598, December.
    2. Musa, Abubakar & Sani, Babangida, 2012. "Inventory ordering policies of delayed deteriorating items under permissible delay in payments," International Journal of Production Economics, Elsevier, vol. 136(1), pages 75-83.
    3. Teunter, R.H. & van der Laan, E.A., 2003. "Valuation of inventories in systems with product recovery," Econometric Institute Research Papers EI 2003-29, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    4. BayIndIr, Z. Pelin & Dekker, Rommert & Porras, Eric, 2006. "Determination of recovery effort for a probabilistic recovery system under various inventory control policies," Omega, Elsevier, vol. 34(6), pages 571-584, December.
    5. Carlo Alberto Magni, 2015. "ROI and profitability index: A note on managerial performance," Department of Economics 0048, University of Modena and Reggio E., Faculty of Economics "Marco Biagi".
    6. Corbacioglu, Umut & van der Laan, Erwin A., 2007. "Setting the holding cost rates in a two-product system with remanufacturing," International Journal of Production Economics, Elsevier, vol. 109(1-2), pages 185-194, September.
    7. Tsan-Ming Choi, 2016. "Multi-period risk minimization purchasing models for fashion products with interest rate, budget, and profit target considerations," Annals of Operations Research, Springer, vol. 237(1), pages 77-98, February.
    8. Magni, Carlo Alberto, 2015. "Aggregate Return On Investment for investments under uncertainty," International Journal of Production Economics, Elsevier, vol. 165(C), pages 29-37.
    9. Giri, B. C. & Dohi, T., 2004. "Optimal lot sizing for an unreliable production system based on net present value approach," International Journal of Production Economics, Elsevier, vol. 92(2), pages 157-167, November.
    10. Tsan-Ming Choi, 2016. "Multi-period risk minimization purchasing models for fashion products with interest rate, budget, and profit target considerations," Annals of Operations Research, Springer, vol. 237(1), pages 77-98, February.
    11. Corbacıoğlu, U. & van der Laan, E.A., 2005. "Setting the holding cost rates in a multi-product system with remanufacturing," ERIM Report Series Research in Management ERS-2005-072-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    12. Teunter, Ruud & van der Laan, Erwin, 2002. "On the non-optimality of the average cost approach for inventory models with remanufacturing," International Journal of Production Economics, Elsevier, vol. 79(1), pages 67-73, September.

  15. Ridder, A.A.N. & van der Laan, E. & Salomon, M., 1997. "How Larger Demand Variability may Lead to Lower Costs in the Newsvendor Problem," Discussion Paper 1997-31, Tilburg University, Center for Economic Research.

    Cited by:

    1. Khouja, Moutaz, 1999. "The single-period (news-vendor) problem: literature review and suggestions for future research," Omega, Elsevier, vol. 27(5), pages 537-553, October.
    2. Sévi, Benoît, 2010. "The newsvendor problem under multiplicative background risk," European Journal of Operational Research, Elsevier, vol. 200(3), pages 918-923, February.
    3. Jammernegg, Werner & Kischka, Peter, 2009. "Risk preferences and robust inventory decisions," International Journal of Production Economics, Elsevier, vol. 118(1), pages 269-274, March.
    4. Xu, Minghui & Lu, Ye, 2013. "The effect of supply uncertainty in price-setting newsvendor models," European Journal of Operational Research, Elsevier, vol. 227(3), pages 423-433.
    5. Jing-Sheng Song & Hanqin Zhang & Yumei Hou & Mingzheng Wang, 2010. "The Effect of Lead Time and Demand Uncertainties in ( r, q ) Inventory Systems," Operations Research, INFORMS, vol. 58(1), pages 68-80, February.
    6. Shaojian Qu & Yongyi Zhou, 2017. "A Study of The Effect of Demand Uncertainty for Low-Carbon Products Using a Newsvendor Model," IJERPH, MDPI, vol. 14(11), pages 1-24, October.
    7. Fleischhacker, Adam J. & Fok, Pak-Wing, 2015. "On the relationship between entropy, demand uncertainty, and expected loss," European Journal of Operational Research, Elsevier, vol. 245(2), pages 623-628.
    8. Kostas Bimpikis & Mihalis G. Markakis, 2016. "Inventory Pooling Under Heavy-Tailed Demand," Management Science, INFORMS, vol. 62(6), pages 1800-1813, June.
    9. Jemai, Zied & Karaesmen, Fikri, 2005. "The influence of demand variability on the performance of a make-to-stock queue," European Journal of Operational Research, Elsevier, vol. 164(1), pages 195-205, July.
    10. Diwakar Gupta & William L. Cooper, 2005. "Stochastic Comparisons in Production Yield Management," Operations Research, INFORMS, vol. 53(2), pages 377-384, April.
    11. Xu, Minghui & Chen, Youhua (Frank) & Xu, Xiaolin, 2010. "The effect of demand uncertainty in a price-setting newsvendor model," European Journal of Operational Research, Elsevier, vol. 207(2), pages 946-957, December.
    12. Khanra, Avijit & Soman, Chetan, 2013. "Sensitivity Analysis of the Newsboy Model," IIMA Working Papers WP2013-09-03, Indian Institute of Management Ahmedabad, Research and Publication Department.
    13. Ewing, Bradley T. & Thompson, Mark A., 2008. "Industrial production, volatility, and the supply chain," International Journal of Production Economics, Elsevier, vol. 115(2), pages 553-558, October.
    14. Halkos, George & Kevork, Ilias, 2012. "Evaluating alternative estimators for optimal order quantities in the newsvendor model with skewed demand," MPRA Paper 36205, University Library of Munich, Germany.
    15. Minner, Stefan & Transchel, Sandra, 2017. "Order variability in perishable product supply chains," European Journal of Operational Research, Elsevier, vol. 260(1), pages 93-107.
    16. Sachs, Anna-Lena & Minner, Stefan, 2014. "The data-driven newsvendor with censored demand observations," International Journal of Production Economics, Elsevier, vol. 149(C), pages 28-36.
    17. Qi Feng & J. George Shanthikumar, 2022. "Applications of Stochastic Orders and Stochastic Functions in Inventory and Pricing Problems," Production and Operations Management, Production and Operations Management Society, vol. 31(4), pages 1433-1453, April.
    18. Chung, Chia-Shin & Flynn, James & Kuik, Roelof & Staliński, Piotr, 2013. "A single-period inventory placement problem for a supply system with the satisficing objective," European Journal of Operational Research, Elsevier, vol. 224(3), pages 520-529.

Articles

  1. Arani, Hamed Vafa & Pourakbar, Morteza & Laan, Erwin van der & de Koster, René, 2023. "How to charge in servicizing: Per period or per use?," European Journal of Operational Research, Elsevier, vol. 304(3), pages 981-996.

    Cited by:

    1. Hu, Xu & Yang, Zhaojun & Sun, Jun & Zhang, Yali, 2023. "Optimal pricing strategy for electric vehicle battery swapping: Pay-per-swap or subscription?," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 171(C).

  2. Hekimoğlu, Mustafa & van der Laan, Ervin & Dekker, Rommert, 2018. "Markov-modulated analysis of a spare parts system with random lead times and disruption risks," European Journal of Operational Research, Elsevier, vol. 269(3), pages 909-922.

    Cited by:

    1. Suresha Kharvi & T. P. M. Pakkala & G. Srinivasan, 2019. "Ordering policies under currency risk sharing agreements: a Markov chain approach," OPSEARCH, Springer;Operational Research Society of India, vol. 56(3), pages 945-964, September.

  3. Pennings, Clint L.P. & van Dalen, Jan & van der Laan, Erwin A., 2017. "Exploiting elapsed time for managing intermittent demand for spare parts," European Journal of Operational Research, Elsevier, vol. 258(3), pages 958-969.

    Cited by:

    1. Tian, Xin & Wang, Haoqing & E, Erjiang, 2021. "Forecasting intermittent demand for inventory management by retailers: A new approach," Journal of Retailing and Consumer Services, Elsevier, vol. 62(C).
    2. Pinçe, Çerağ & Turrini, Laura & Meissner, Joern, 2021. "Intermittent demand forecasting for spare parts: A Critical review," Omega, Elsevier, vol. 105(C).
    3. Van der Auweraer, Sarah & Boute, Robert N. & Syntetos, Aris A., 2019. "Forecasting spare part demand with installed base information: A review," International Journal of Forecasting, Elsevier, vol. 35(1), pages 181-196.
    4. Prak, Dennis & Rogetzer, Patricia, 2022. "Timing intermittent demand with time-varying order-up-to levels," European Journal of Operational Research, Elsevier, vol. 303(3), pages 1126-1136.
    5. Amniattalab, Ayda & Frenk, J.B.G. & Hekimoğlu, Mustafa, 2023. "On spare parts demand and the installed base concept: A theoretical approach," International Journal of Production Economics, Elsevier, vol. 266(C).

  4. Ruiz-Benítez, Rocío & Ketzenberg, Michael & van der Laan, Erwin A., 2014. "Managing consumer returns in high clockspeed industries," Omega, Elsevier, vol. 43(C), pages 54-63.

    Cited by:

    1. Chan, Chi Kin & Man, Nora & Fang, Fei & Campbell, J.F., 2020. "Supply chain coordination with reverse logistics: A vendor/recycler-buyer synchronized cycles model," Omega, Elsevier, vol. 95(C).
    2. Patricia Guarnieri & Lucio Camara e Silva & Bárbara de Oliveira Vieira, 2020. "How to Assess Reverse Logistics of e-Waste Considering a Multicriteria Perspective? A Model Proposition," Logistics, MDPI, vol. 4(4), pages 1-31, October.
    3. Zikopoulos, Christos & Tagaras, George, 2015. "Reverse supply chains: Effects of collection network and returns classification on profitability," European Journal of Operational Research, Elsevier, vol. 246(2), pages 435-449.
    4. Taniya Mukherjee & Isha Sangal & Biswajit Sarkar & Qais Almaamari & Tamer M. Alkadash, 2023. "How Effective Is Reverse Cross-Docking and Carbon Policies in Controlling Carbon Emission from the Fashion Industry?," Mathematics, MDPI, vol. 11(13), pages 1-25, June.
    5. Tianji Yang & Chao Fu & Xinbao Liu & Jun Pei & Lin Liu & Panos M. Pardalos, 2018. "Closed-loop supply chain inventory management with recovery information of reusable containers," Journal of Combinatorial Optimization, Springer, vol. 35(1), pages 266-292, January.
    6. Dasci, Abdullah & Huang, Rongbing, 2017. "A continuous approximation method for dynamic pricing problem under costly price modifications," Omega, Elsevier, vol. 72(C), pages 38-49.
    7. Difrancesco, Rita Maria & Huchzermeier, Arnd & Schröder, David, 2018. "Optimizing the return window for online fashion retailers with closed-loop refurbishment," Omega, Elsevier, vol. 78(C), pages 205-221.
    8. Li, Kate J. & Xu, Susan H., 2015. "The comparison between trade-in and leasing of a product with technology innovations," Omega, Elsevier, vol. 54(C), pages 134-146.
    9. Yan, Shuai & Archibald, Thomas Welsh & Han, Xiaohua & Bian, Yiwen, 2022. "Whether to adopt “buy online and return to store” strategy in a competitive market?," European Journal of Operational Research, Elsevier, vol. 301(3), pages 974-986.
    10. Soto Zuluaga, Juan Pablo & Thiell, Marcus & Colomé Perales, Rosa, 2017. "Reverse cross-docking," Omega, Elsevier, vol. 66(PA), pages 48-57.
    11. Miao, Zhaowei & Fu, Ke & Xia, Zhiqiang & Wang, Yu, 2017. "Models for closed-loop supply chain with trade-ins," Omega, Elsevier, vol. 66(PB), pages 308-326.
    12. Gaur, Jighyasu & Amini, Mehdi & Rao, A.K., 2017. "Closed-loop supply chain configuration for new and reconditioned products: An integrated optimization model," Omega, Elsevier, vol. 66(PB), pages 212-223.
    13. Akturk, M. Serkan & Ketzenberg, Michael & Yıldız, Barış, 2021. "Managing consumer returns with technology-enabled countermeasures," Omega, Elsevier, vol. 102(C).
    14. Khouja, Moutaz & Ajjan, Haya & Liu, Xin, 2019. "The effect of return and price adjustment policies on a retailer’s performance," European Journal of Operational Research, Elsevier, vol. 276(2), pages 466-482.
    15. Muyldermans, L. & Van Wassenhove, L.N. & Guide, V.D.R., 2019. "Managing high-end ex-demonstration product returns," European Journal of Operational Research, Elsevier, vol. 277(1), pages 195-214.

  5. Marisa P. De Brito & Erwin A. Van der Laan, 2010. "Supply Chain Management and Sustainability: Procrastinating Integration in Mainstream Research," Sustainability, MDPI, vol. 2(4), pages 1-12, March.

    Cited by:

    1. Govindan, Kannan & Soleimani, Hamed & Kannan, Devika, 2015. "Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future," European Journal of Operational Research, Elsevier, vol. 240(3), pages 603-626.
    2. Ali Bastas & Kapila Liyanage, 2018. "ISO 9001 and Supply Chain Integration Principles Based Sustainable Development: A Delphi Study," Sustainability, MDPI, vol. 10(12), pages 1-35, December.
    3. Zhi-Peng Li & Hyi-Thaek Ceong & Sang-Joon Lee, 2021. "The Effect of Blockchain Operation Capabilities on Competitive Performance in Supply Chain Management," Sustainability, MDPI, vol. 13(21), pages 1-24, November.
    4. Yong Zhang & Jiayu Ao & Jiayue Deng, 2019. "The Influence of High–Low Power on Green Consumption: The Moderating Effect of Impression Management Motivation," Sustainability, MDPI, vol. 11(16), pages 1-16, August.
    5. Jisoo Oh & Bongju Jeong, 2014. "Profit Analysis and Supply Chain Planning Model for Closed-Loop Supply Chain in Fashion Industry," Sustainability, MDPI, vol. 6(12), pages 1-30, December.
    6. Romy Morana & Stefan Seuring, 2011. "A Three Level Framework for Closed-Loop Supply Chain Management—Linking Society, Chain and Actor Level," Sustainability, MDPI, vol. 3(4), pages 1-14, April.
    7. Wei Yan & Junwu Chai & Zhifeng Qian & Sang-Bing Tsai & Hong Chen & Yu Xiong, 2018. "Operational Decisions on Remanufacturing Outsourcing Involved with Corporate Environmental and Social Responsibility—A Sustainable Perspective," Sustainability, MDPI, vol. 10(4), pages 1-18, April.
    8. Jiguang Wang & Bing Ran, 2018. "Sustainable Collaborative Governance in Supply Chain," Sustainability, MDPI, vol. 10(1), pages 1-17, January.
    9. Bin Shen & Qingying Li, 2015. "Impacts of Returning Unsold Products in Retail Outsourcing Fashion Supply Chain: A Sustainability Analysis," Sustainability, MDPI, vol. 7(2), pages 1-14, January.
    10. Daeheon Choi & Chune Young Chung & Jason Young, 2019. "Sustainable Online Shopping Logistics for Customer Satisfaction and Repeat Purchasing Behavior: Evidence from China," Sustainability, MDPI, vol. 11(20), pages 1-20, October.
    11. Zikopoulos, Christos, 2022. "On the effect of upgradable products design on circular economy," International Journal of Production Economics, Elsevier, vol. 254(C).
    12. Veronica S Ülgen & Maria Björklund & Niklas Simm & Helena Forslund, 2019. "Inter-Organizational Supply Chain Interaction for Sustainability: A Systematic Literature Review," Sustainability, MDPI, vol. 11(19), pages 1-25, October.

  6. de Brito, Marisa P. & van der Laan, Erwin A., 2009. "Inventory control with product returns: The impact of imperfect information," European Journal of Operational Research, Elsevier, vol. 194(1), pages 85-101, April.

    Cited by:

    1. Nowak, Thomas & Hofer, Vera, 2014. "On stabilizing volatile product returns," European Journal of Operational Research, Elsevier, vol. 234(3), pages 701-708.
    2. Wee, Hui-Ming & Lee, Ming-Chang & Yu, Jonas C.P. & Edward Wang, C., 2011. "Optimal replenishment policy for a deteriorating green product: Life cycle costing analysis," International Journal of Production Economics, Elsevier, vol. 133(2), pages 603-611, October.
    3. Yoo, Seung Ho, 2014. "Product quality and return policy in a supply chain under risk aversion of a supplier," International Journal of Production Economics, Elsevier, vol. 154(C), pages 146-155.
    4. Zhou, Li & Xie, Jiaping & Gu, Xiaoyu & Lin, Yong & Ieromonachou, Petros & Zhang, Xiaole, 2016. "Forecasting return of used products for remanufacturing using Graphical Evaluation and Review Technique (GERT)," International Journal of Production Economics, Elsevier, vol. 181(PB), pages 315-324.
    5. Carrasco-Gallego, R. & Ponce-Cueto, E. & Dekker, R., 2009. "A framework for closed-loop supply chains of reusable articles," Econometric Institute Research Papers EI 2009-21, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    6. Petropoulos, Fotios & Apiletti, Daniele & Assimakopoulos, Vassilios & Babai, Mohamed Zied & Barrow, Devon K. & Ben Taieb, Souhaib & Bergmeir, Christoph & Bessa, Ricardo J. & Bijak, Jakub & Boylan, Joh, 2022. "Forecasting: theory and practice," International Journal of Forecasting, Elsevier, vol. 38(3), pages 705-871.
      • Fotios Petropoulos & Daniele Apiletti & Vassilios Assimakopoulos & Mohamed Zied Babai & Devon K. Barrow & Souhaib Ben Taieb & Christoph Bergmeir & Ricardo J. Bessa & Jakub Bijak & John E. Boylan & Jet, 2020. "Forecasting: theory and practice," Papers 2012.03854, arXiv.org, revised Jan 2022.
    7. Govindan, Kannan & Soleimani, Hamed & Kannan, Devika, 2015. "Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future," European Journal of Operational Research, Elsevier, vol. 240(3), pages 603-626.
    8. Tsiliyannis, Christos Aristeides, 2018. "Markov chain modeling and forecasting of product returns in remanufacturing based on stock mean-age," European Journal of Operational Research, Elsevier, vol. 271(2), pages 474-489.
    9. Flapper, S.D.P. & Gayon, J.P. & Vercraene, S., 2012. "Control of a production–inventory system with returns under imperfect advance return information," European Journal of Operational Research, Elsevier, vol. 218(2), pages 392-400.
    10. Tianji Yang & Chao Fu & Xinbao Liu & Jun Pei & Lin Liu & Panos M. Pardalos, 2018. "Closed-loop supply chain inventory management with recovery information of reusable containers," Journal of Combinatorial Optimization, Springer, vol. 35(1), pages 266-292, January.
    11. Christos I. Papanagnou, 2022. "Measuring and eliminating the bullwhip in closed loop supply chains using control theory and Internet of Things," Annals of Operations Research, Springer, vol. 310(1), pages 153-170, March.
    12. Mabel C. Chou & Chee-Khian Sim & Xue-Ming Yuan, 2020. "Policies for inventory models with product returns forecast from past demands and past sales," Annals of Operations Research, Springer, vol. 288(1), pages 137-180, May.
    13. Hosoda, Takamichi & Disney, Stephen M. & Gavirneni, Srinagesh, 2015. "The impact of information sharing, random yield, correlation, and lead times in closed loop supply chains," European Journal of Operational Research, Elsevier, vol. 246(3), pages 827-836.
    14. Kim, Taebok & Glock, Christoph H. & Kwon, Yongjang, 2014. "A closed-loop supply chain for deteriorating products under stochastic container return times," Omega, Elsevier, vol. 43(C), pages 30-40.
    15. Ilkka Ritola & Harold Krikke & Marjolein C.J. Caniëls, 2020. "Learning from Returned Products in a Closed Loop Supply Chain: A Systematic Literature Review," Logistics, MDPI, vol. 4(2), pages 1-13, April.
    16. Tripathy, Satchidananda & Kumar, Akhilesh & Mahanty, Biswajit, 2023. "Short-lived product returns forecasting when customers are unwilling to return the product: A grey-graphical evaluation and review technique," Technological Forecasting and Social Change, Elsevier, vol. 195(C).
    17. Andre P. Calmon & Stephen C. Graves, 2017. "Inventory Management in a Consumer Electronics Closed-Loop Supply Chain," Manufacturing & Service Operations Management, INFORMS, vol. 19(4), pages 568-585, October.
    18. Wen, Xin & Choi, Tsan-Ming & Chung, Sai-Ho, 2019. "Fashion retail supply chain management: A review of operational models," International Journal of Production Economics, Elsevier, vol. 207(C), pages 34-55.
    19. Xing Hu & Zhixi Wan & Nagesh N. Murthy, 2019. "Dynamic Pricing of Limited Inventories with Product Returns," Manufacturing & Service Operations Management, INFORMS, vol. 21(3), pages 501-518, July.
    20. Juan Pedro Sepúlveda-Rojas & Rodrigo Ternero, 2020. "Analysis of the Value of Information and Coordination in a Dyadic Closed Loop Supply Chain," Sustainability, MDPI, vol. 12(20), pages 1-18, October.
    21. Pauline Keh & Florence Rodhain & Régis Meissonier & Virginie Llorca, 2012. "Financial performance, environmental compliance, and social outcomes: The three challenges of reverse logistics," Post-Print hal-01965596, HAL.
    22. Josip Marić & Marco Opazo-Basáez, 2019. "Green Servitization for Flexible and Sustainable Supply Chain Operations: A Review of Reverse Logistics Services in Manufacturing," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 20(1), pages 65-80, December.
    23. Duong, Quang Huy & Zhou, Li & Meng, Meng & Nguyen, Truong Van & Ieromonachou, Petros & Nguyen, Duy Tiep, 2022. "Understanding product returns: A systematic literature review using machine learning and bibliometric analysis," International Journal of Production Economics, Elsevier, vol. 243(C).

  7. Corbacioglu, Umut & van der Laan, Erwin A., 2007. "Setting the holding cost rates in a two-product system with remanufacturing," International Journal of Production Economics, Elsevier, vol. 109(1-2), pages 185-194, September.

    Cited by:

    1. Diabat, Ali & Kannan, Devika & Kaliyan, Mathiyazhagan & Svetinovic, Davor, 2013. "An optimization model for product returns using genetic algorithms and artificial immune system," Resources, Conservation & Recycling, Elsevier, vol. 74(C), pages 156-169.
    2. Farvid, Mojtaba & Rosling, Kaj, 2014. "The discounted (R,Q) inventory model—The Shrewd Accountant's Heuristic," International Journal of Production Economics, Elsevier, vol. 149(C), pages 17-27.
    3. Ghiami, Yousef & Beullens, Patrick, 2016. "Planning for shortages? Net Present Value analysis for a deteriorating item with partial backlogging," International Journal of Production Economics, Elsevier, vol. 178(C), pages 1-11.
    4. Beullens, Patrick & Janssens, Gerrit K., 2014. "Adapting inventory models for handling various payment structures using net present value equivalence analysis," International Journal of Production Economics, Elsevier, vol. 157(C), pages 190-200.
    5. Mukhopadhyay, Samar K. & Ma, Huafan, 2009. "Joint procurement and production decisions in remanufacturing under quality and demand uncertainty," International Journal of Production Economics, Elsevier, vol. 120(1), pages 5-17, July.

  8. van der Laan, Erwin A. & Teunter, Ruud H., 2006. "Simple heuristics for push and pull remanufacturing policies," European Journal of Operational Research, Elsevier, vol. 175(2), pages 1084-1102, December.
    See citations under working paper version above.
  9. Guide, V. Daniel R. & Souza, Gilvan C. & van der Laan, Erwin, 2005. "Performance of static priority rules for shared facilities in a remanufacturing shop with disassembly and reassembly," European Journal of Operational Research, Elsevier, vol. 164(2), pages 341-353, July.

    Cited by:

    1. Pazour, Jennifer A. & Roy, Debjit, 2012. "Minimizing Customer Waiting Costs for Rental Vehicle Providers using Threshold Reservation Policies," IIMA Working Papers WP2012-12-05, Indian Institute of Management Ahmedabad, Research and Publication Department.
    2. Rachaniotis, N.P. & Pappis, C.P., 2008. "Preventive maintenance and upgrade system: Optimizing the whole performance system by components' replacement or rearrangement," International Journal of Production Economics, Elsevier, vol. 112(1), pages 236-244, March.
    3. Yaping Ren & Xinyu Lu & Hongfei Guo & Zhaokang Xie & Haoyang Zhang & Chaoyong Zhang, 2023. "A Review of Combinatorial Optimization Problems in Reverse Logistics and Remanufacturing for End-of-Life Products," Mathematics, MDPI, vol. 11(2), pages 1-24, January.
    4. Kaya, Onur, 2010. "Incentive and production decisions for remanufacturing operations," European Journal of Operational Research, Elsevier, vol. 201(2), pages 442-453, March.
    5. Vahdani, Behnam & Mohammadi, M., 2015. "A bi-objective interval-stochastic robust optimization model for designing closed loop supply chain network with multi-priority queuing system," International Journal of Production Economics, Elsevier, vol. 170(PA), pages 67-87.
    6. Felix T.S. Chan & Nan Li & S.H. Chung & Mozafar Saadat, 2017. "Management of sustainable manufacturing systems-a review on mathematical problems," International Journal of Production Research, Taylor & Francis Journals, vol. 55(4), pages 1210-1225, February.
    7. Pellerin, Robert & Sadr, Javad & Gharbi, Ali & Malhamé, Roland, 2009. "A production rate control policy for stochastic repair and remanufacturing systems," International Journal of Production Economics, Elsevier, vol. 121(1), pages 39-48, September.

  10. R Teunter & E van der Laan & D Vlachos, 2004. "Inventory strategies for systems with fast remanufacturing," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 55(5), pages 475-484, May.
    See citations under working paper version above.
  11. van der Laan, Erwin, 2003. "An NPV and AC analysis of a stochastic inventory system with joint manufacturing and remanufacturing," International Journal of Production Economics, Elsevier, vol. 81(1), pages 317-331, January.
    See citations under working paper version above.
  12. Teunter, Ruud & van der Laan, Erwin, 2002. "On the non-optimality of the average cost approach for inventory models with remanufacturing," International Journal of Production Economics, Elsevier, vol. 79(1), pages 67-73, September.

    Cited by:

    1. Pati, Rupesh Kumar & Vrat, Prem & Kumar, Pradeep, 2006. "Economic analysis of paper recycling vis-a-vis wood as raw material," International Journal of Production Economics, Elsevier, vol. 103(2), pages 489-508, October.
    2. Rahman, Shams & Subramanian, Nachiappan, 2012. "Factors for implementing end-of-life computer recycling operations in reverse supply chains," International Journal of Production Economics, Elsevier, vol. 140(1), pages 239-248.
    3. Musa, Abubakar & Sani, Babangida, 2012. "Inventory ordering policies of delayed deteriorating items under permissible delay in payments," International Journal of Production Economics, Elsevier, vol. 136(1), pages 75-83.
    4. BayIndIr, Z. Pelin & Dekker, Rommert & Porras, Eric, 2006. "Determination of recovery effort for a probabilistic recovery system under various inventory control policies," Omega, Elsevier, vol. 34(6), pages 571-584, December.
    5. Mitra, Subrata, 2007. "Revenue management for remanufactured products," Omega, Elsevier, vol. 35(5), pages 553-562, October.
    6. Ghiami, Yousef & Beullens, Patrick, 2016. "Planning for shortages? Net Present Value analysis for a deteriorating item with partial backlogging," International Journal of Production Economics, Elsevier, vol. 178(C), pages 1-11.
    7. Yang, P.C. & Chung, S.L. & Wee, H.M. & Zahara, E. & Peng, C.Y., 2013. "Collaboration for a closed-loop deteriorating inventory supply chain with multi-retailer and price-sensitive demand," International Journal of Production Economics, Elsevier, vol. 143(2), pages 557-566.
    8. Dobos, Imre & Richter, Knut, 2004. "An extended production/recycling model with stationary demand and return rates," International Journal of Production Economics, Elsevier, vol. 90(3), pages 311-323, August.
    9. Andriolo, Alessandro & Battini, Daria & Grubbström, Robert W. & Persona, Alessandro & Sgarbossa, Fabio, 2014. "A century of evolution from Harris׳s basic lot size model: Survey and research agenda," International Journal of Production Economics, Elsevier, vol. 155(C), pages 16-38.
    10. Grubbström, Robert W., 2014. "Cumulative staircase considerations for dynamic lotsizing when backlogging is allowed," International Journal of Production Economics, Elsevier, vol. 157(C), pages 201-211.
    11. Ghiami, Yousef, 2023. "An analysis on production and inventory models with discounted cash-flows," Omega, Elsevier, vol. 117(C).
    12. Grubbström, Robert W., 2010. "The Newsboy problem when customer demand is a compound renewal process," European Journal of Operational Research, Elsevier, vol. 203(1), pages 134-142, May.
    13. Beullens, Patrick & Janssens, Gerrit K., 2014. "Adapting inventory models for handling various payment structures using net present value equivalence analysis," International Journal of Production Economics, Elsevier, vol. 157(C), pages 190-200.
    14. Akshay Mutha & Saurabh Bansal & V. Daniel R. Guide, 2021. "Managing the Inter‐Functional Tension between Accounting‐ and Financial‐Profits in Remanufacturing Multiple‐Usecycle Products," Production and Operations Management, Production and Operations Management Society, vol. 30(9), pages 2993-3014, September.
    15. Grubbström, Robert W., 2014. "Dynamic lotsizing with a finite production rate," International Journal of Production Economics, Elsevier, vol. 149(C), pages 68-79.
    16. Wakolbinger, Tina & Toyasaki, Fuminori & Nowak, Thomas & Nagurney, Anna, 2014. "When and for whom would e-waste be a treasure trove? Insights from a network equilibrium model of e-waste flows," International Journal of Production Economics, Elsevier, vol. 154(C), pages 263-273.
    17. Gonzalez-Torre, Pilar L. & Adenso-Diaz, B. & Artiba, Hakim, 2004. "Environmental and reverse logistics policies in European bottling and packaging firms," International Journal of Production Economics, Elsevier, vol. 88(1), pages 95-104, March.
    18. Beullens, Patrick & Janssens, Gerrit K., 2011. "Holding costs under push or pull conditions - The impact of the Anchor Point," European Journal of Operational Research, Elsevier, vol. 215(1), pages 115-125, November.
    19. Kara, S. & Rugrungruang, F. & Kaebernick, H., 2007. "Simulation modelling of reverse logistics networks," International Journal of Production Economics, Elsevier, vol. 106(1), pages 61-69, March.

  13. Kiesmuller, Gudrun P. & van der Laan, Erwin A., 2001. "An inventory model with dependent product demands and returns," International Journal of Production Economics, Elsevier, vol. 72(1), pages 73-87, June.
    See citations under working paper version above.
  14. Inderfurth, Karl & van der Laan, Erwin, 2001. "Leadtime effects and policy improvement for stochastic inventory control with remanufacturing," International Journal of Production Economics, Elsevier, vol. 71(1-3), pages 381-390, May.

    Cited by:

    1. Tang, Ou & Grubbstrom, Robert W., 2005. "Considering stochastic lead times in a manufacturing/remanufacturing system with deterministic demands and returns," International Journal of Production Economics, Elsevier, vol. 93(1), pages 285-300, January.
    2. Zolfagharinia, Hossein & Hafezi, Maryam & Farahani, Reza Zanjirani & Fahimnia, Behnam, 2014. "A hybrid two-stock inventory control model for a reverse supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 67(C), pages 141-161.
    3. van der Laan, E.A. & Teunter, R.H., 2004. "Simple heuristics for push and pull remanufacturing policies," Econometric Institute Research Papers EI 2004-34, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    4. Kiesmuller, G. P., 2003. "A new approach for controlling a hybrid stochastic manufacturing/remanufacturing system with inventories and different leadtimes," European Journal of Operational Research, Elsevier, vol. 147(1), pages 62-71, May.
    5. Flapper, Simme Douwe & Gayon, Jean-Philippe & Lim, Lâm Laurent, 2014. "On the optimal control of manufacturing and remanufacturing activities with a single shared server," European Journal of Operational Research, Elsevier, vol. 234(1), pages 86-98.
    6. de Brito, M.P. & Dekker, R., 2001. "Modelling product returns in inventory control - exploring the validity or general assumptions," Econometric Institute Research Papers EI 2001-27, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    7. Usman Ali & Bashir Salah & Khawar Naeem & Abdul Salam Khan & Razaullah Khan & Catalin Iulian Pruncu & Muhammad Abas & Saadat Khan, 2020. "Improved MRO Inventory Management System in Oil and Gas Company: Increased Service Level and Reduced Average Inventory Investment," Sustainability, MDPI, vol. 12(19), pages 1-19, September.
    8. Kim, Eungab & Saghafian, Soroush & Van Oyen, Mark P., 2013. "Joint control of production, remanufacturing, and disposal activities in a hybrid manufacturing–remanufacturing system," European Journal of Operational Research, Elsevier, vol. 231(2), pages 337-348.
    9. Z P Bayındır & N Erkip & R Güllü, 2005. "Assessing the benefits of remanufacturing option under one-way substitution," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(3), pages 286-296, March.
    10. Corbacioglu, Umut & van der Laan, Erwin A., 2007. "Setting the holding cost rates in a two-product system with remanufacturing," International Journal of Production Economics, Elsevier, vol. 109(1-2), pages 185-194, September.
    11. Hosoda, Takamichi & Disney, Stephen M. & Gavirneni, Srinagesh, 2015. "The impact of information sharing, random yield, correlation, and lead times in closed loop supply chains," European Journal of Operational Research, Elsevier, vol. 246(3), pages 827-836.
    12. Li, Jianzhi & González, Miguel & Zhu, Yun, 2009. "A hybrid simulation optimization method for production planning of dedicated remanufacturing," International Journal of Production Economics, Elsevier, vol. 117(2), pages 286-301, February.
    13. Shi, Jianmai & Zhang, Guoqing & Sha, Jichang, 2011. "Optimal production and pricing policy for a closed loop system," Resources, Conservation & Recycling, Elsevier, vol. 55(6), pages 639-647.
    14. Nativi, Juan Jose & Lee, Seokcheon, 2012. "Impact of RFID information-sharing strategies on a decentralized supply chain with reverse logistics operations," International Journal of Production Economics, Elsevier, vol. 136(2), pages 366-377.
    15. Ahiska, S. Sebnem & King, Russell E., 2010. "Life cycle inventory policy characterizations for a single-product recoverable system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 51-61, March.
    16. Ponte, Borja & Cannella, Salvatore & Dominguez, Roberto & Naim, Mohamed M. & Syntetos, Aris A., 2021. "Quality grading of returns and the dynamics of remanufacturing," International Journal of Production Economics, Elsevier, vol. 236(C).
    17. Zamanzad Gavidel, Saeed & Rickli, Jeremy L., 2019. "Normal to extreme Operation Transition Threshold analysis for remanufacturing systems," International Journal of Production Economics, Elsevier, vol. 213(C), pages 46-54.
    18. Ponte, Borja & Framinan, Jose M. & Cannella, Salvatore & Dominguez, Roberto, 2020. "Quantifying the Bullwhip Effect in closed-loop supply chains: The interplay of information transparencies, return rates, and lead times," International Journal of Production Economics, Elsevier, vol. 230(C).
    19. Takahashi, Katsuhiko & Morikawa, Katsumi & Myreshka & Takeda, Daisuke & Mizuno, Akihiko, 2007. "Inventory control for a MARKOVIAN remanufacturing system with stochastic decomposition process," International Journal of Production Economics, Elsevier, vol. 108(1-2), pages 416-425, July.
    20. Hosoda, Takamichi & Disney, Stephen M., 2018. "A unified theory of the dynamics of closed-loop supply chains," European Journal of Operational Research, Elsevier, vol. 269(1), pages 313-326.
    21. Hosoda, Takamichi & Disney, Stephen M. & Zhou, Li, 2021. "The yield rate paradox in closed-loop supply chains," International Journal of Production Economics, Elsevier, vol. 239(C).
    22. Samarghandi, Hamed, 2017. "Studying the impact of merged and divided storage policies on the profitability of a remanufacturing system with deteriorating revenues," International Journal of Production Economics, Elsevier, vol. 193(C), pages 160-171.
    23. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    24. Pellerin, Robert & Sadr, Javad & Gharbi, Ali & Malhamé, Roland, 2009. "A production rate control policy for stochastic repair and remanufacturing systems," International Journal of Production Economics, Elsevier, vol. 121(1), pages 39-48, September.

  15. Teunter, Ruud H. & van der Laan, Erwin & Inderfurth, Karl, 2000. "How to set the holding cost rates in average cost inventory models with reverse logistics?," Omega, Elsevier, vol. 28(4), pages 409-415, August.

    Cited by:

    1. Pilar I. Vidal-Carreras & Jose P. Garcia-Sabater & Julio J. Garcia-Sabater, 2017. "A practical model for managing inventories with unknown costs and a budget constraint," International Journal of Production Research, Taylor & Francis Journals, vol. 55(1), pages 118-129, January.
    2. Tang, Ou & Grubbstrom, Robert W., 2005. "Considering stochastic lead times in a manufacturing/remanufacturing system with deterministic demands and returns," International Journal of Production Economics, Elsevier, vol. 93(1), pages 285-300, January.
    3. Zolfagharinia, Hossein & Hafezi, Maryam & Farahani, Reza Zanjirani & Fahimnia, Behnam, 2014. "A hybrid two-stock inventory control model for a reverse supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 67(C), pages 141-161.
    4. Ruud H. Teunter, 2001. "Economic ordering quantities for recoverable item inventory systems," Naval Research Logistics (NRL), John Wiley & Sons, vol. 48(6), pages 484-495, September.
    5. Rossi, Tommaso & Pozzi, Rossella & Testa, Mariapaola, 2017. "EOQ-based inventory management in single-machine multi-item systems," Omega, Elsevier, vol. 71(C), pages 106-113.
    6. Pokharel, Shaligram & Mutha, Akshay, 2009. "Perspectives in reverse logistics: A review," Resources, Conservation & Recycling, Elsevier, vol. 53(4), pages 175-182.
    7. Teunter, Ruud H. & Vlachos, Dimitrios, 2002. "On the necessity of a disposal option for returned items that can be remanufactured," International Journal of Production Economics, Elsevier, vol. 75(3), pages 257-266, February.
    8. Mitra, Subrata, 2009. "Analysis of a two-echelon inventory system with returns," Omega, Elsevier, vol. 37(1), pages 106-115, February.
    9. Kottala Sri Yogi, 2015. "Performance evaluation of reverse logistics: A case of LPG agency," Cogent Business & Management, Taylor & Francis Journals, vol. 2(1), pages 1063229-106, December.
    10. Pourakbar, M. & Frenk, J.B.G. & Dekker, R., 2010. "End-of-Life Inventory Decisions for Consumer Electronics Service Parts," Econometric Institute Research Papers EI 2009-48, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    11. Teunter, R.H. & van der Laan, E.A., 2003. "Valuation of inventories in systems with product recovery," Econometric Institute Research Papers EI 2003-29, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    12. BayIndIr, Z. Pelin & Dekker, Rommert & Porras, Eric, 2006. "Determination of recovery effort for a probabilistic recovery system under various inventory control policies," Omega, Elsevier, vol. 34(6), pages 571-584, December.
    13. Hsien-Jen Lin, 2015. "Two-echelon stochastic inventory system with returns and partial backlogging," International Journal of Systems Science, Taylor & Francis Journals, vol. 46(6), pages 966-975, April.
    14. ASADABADI Mehdi Rajabi, 2016. "A Revision On Cost Elements Of The Eoq Model," Studies in Business and Economics, Lucian Blaga University of Sibiu, Faculty of Economic Sciences, vol. 11(1), pages 5-14, April.
    15. García-Rodríguez, Francisco J. & Castilla-Gutiérrez, Carlos & Bustos-Flores, Carlos, 2013. "Implementation of reverse logistics as a sustainable tool for raw material purchasing in developing countries: The case of Venezuela," International Journal of Production Economics, Elsevier, vol. 141(2), pages 582-592.
    16. Fei Zhang & Zailin Guan & Li Zhang & Yanyan Cui & Pengxing Yi & Saif Ullah, 2019. "Inventory management for a remanufacture-to-order production with multi-components (parts)," Journal of Intelligent Manufacturing, Springer, vol. 30(1), pages 59-78, January.
    17. Mitra, Subrata, 2007. "Revenue management for remanufactured products," Omega, Elsevier, vol. 35(5), pages 553-562, October.
    18. Chouinard, Marc & D'Amours, Sophie & Aït-Kadi, Daoud, 2008. "A stochastic programming approach for designing supply loops," International Journal of Production Economics, Elsevier, vol. 113(2), pages 657-677, June.
    19. Davide Castellano & Christoph H. Glock, 2021. "The average-cost formulation of lot sizing models and inventory carrying charges: a technical note," Operations Management Research, Springer, vol. 14(1), pages 194-201, June.
    20. Corbacioglu, Umut & van der Laan, Erwin A., 2007. "Setting the holding cost rates in a two-product system with remanufacturing," International Journal of Production Economics, Elsevier, vol. 109(1-2), pages 185-194, September.
    21. Teunter, R.H. & van der Laan, E.A. & Vlachos, D., 2002. "Inventory strategies for systems with fast remanufacturing," ERIM Report Series Research in Management ERS-2002-77-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    22. Schulz, Tobias & Voigt, Guido, 2014. "A flexibly structured lot sizing heuristic for a static remanufacturing system," Omega, Elsevier, vol. 44(C), pages 21-31.
    23. Ghiami, Yousef, 2023. "An analysis on production and inventory models with discounted cash-flows," Omega, Elsevier, vol. 117(C).
    24. Beullens, Patrick & Janssens, Gerrit K., 2014. "Adapting inventory models for handling various payment structures using net present value equivalence analysis," International Journal of Production Economics, Elsevier, vol. 157(C), pages 190-200.
    25. Teunter, R.H. & Bayindir, Z.P. & van den Heuvel, W., 2005. "Dynamic lot sizing with product returns," Econometric Institute Research Papers EI 2005-17, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    26. Akshay Mutha & Saurabh Bansal & V. Daniel R. Guide, 2021. "Managing the Inter‐Functional Tension between Accounting‐ and Financial‐Profits in Remanufacturing Multiple‐Usecycle Products," Production and Operations Management, Production and Operations Management Society, vol. 30(9), pages 2993-3014, September.
    27. Geraldo Ferrer & Jayashankar M. Swaminathan, 2006. "Managing New and Remanufactured Products," Management Science, INFORMS, vol. 52(1), pages 15-26, January.
    28. Kannan, Devika & Diabat, Ali & Alrefaei, Mahmoud & Govindan, Kannan & Yong, Geng, 2012. "A carbon footprint based reverse logistics network design model," Resources, Conservation & Recycling, Elsevier, vol. 67(C), pages 75-79.
    29. Corbacıoğlu, U. & van der Laan, E.A., 2005. "Setting the holding cost rates in a multi-product system with remanufacturing," ERIM Report Series Research in Management ERS-2005-072-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    30. Duong, Quang Huy & Zhou, Li & Meng, Meng & Nguyen, Truong Van & Ieromonachou, Petros & Nguyen, Duy Tiep, 2022. "Understanding product returns: A systematic literature review using machine learning and bibliometric analysis," International Journal of Production Economics, Elsevier, vol. 243(C).
    31. Beullens, Patrick & Janssens, Gerrit K., 2011. "Holding costs under push or pull conditions - The impact of the Anchor Point," European Journal of Operational Research, Elsevier, vol. 215(1), pages 115-125, November.
    32. Teunter, Ruud & van der Laan, Erwin, 2002. "On the non-optimality of the average cost approach for inventory models with remanufacturing," International Journal of Production Economics, Elsevier, vol. 79(1), pages 67-73, September.
    33. Teunter, Ruud & Tang, Ou & Kaparis, Konstantinos, 2009. "Heuristics for the economic lot scheduling problem with returns," International Journal of Production Economics, Elsevier, vol. 118(1), pages 323-330, March.

  16. Erwin van der Laan & Marc Salomon & Rommert Dekker & Luk Van Wassenhove, 1999. "Inventory Control in Hybrid Systems with Remanufacturing," Management Science, INFORMS, vol. 45(5), pages 733-747, May.

    Cited by:

    1. Huihui Liu & Xiaohang Yue & Hui Ding & G. Keong Leong, 2017. "Optimal Remanufacturing Certification Contracts in the Electrical and Electronic Industry," Sustainability, MDPI, vol. 9(4), pages 1-17, March.
    2. Zhou, Li & Naim, Mohamed M. & Ou Tang & Towill, Denis R., 2006. "Dynamic performance of a hybrid inventory system with a Kanban policy in remanufacturing process," Omega, Elsevier, vol. 34(6), pages 585-598, December.
    3. Liu, Wenjie & Liu, Wei & Shen, Ningning & Xu, Zhitao & Xie, Naiming & Chen, Jian & Zhou, Huiyu, 2022. "Pricing and collection decisions of a closed-loop supply chain with fuzzy demand," International Journal of Production Economics, Elsevier, vol. 245(C).
    4. Fleischmann, Moritz & Kuik, Roelof, 2003. "On optimal inventory control with independent stochastic item returns," European Journal of Operational Research, Elsevier, vol. 151(1), pages 25-37, November.
    5. Robotis, Andreas & Bhattacharya, Shantanu & Van Wassenhove, Luk N., 2005. "The effect of remanufacturing on procurement decisions for resellers in secondary markets," European Journal of Operational Research, Elsevier, vol. 163(3), pages 688-705, June.
    6. Ruud H. Teunter, 2001. "Economic ordering quantities for recoverable item inventory systems," Naval Research Logistics (NRL), John Wiley & Sons, vol. 48(6), pages 484-495, September.
    7. de Brito, Marisa P. & van der Laan, Erwin A., 2009. "Inventory control with product returns: The impact of imperfect information," European Journal of Operational Research, Elsevier, vol. 194(1), pages 85-101, April.
    8. Vladimir Polotski & Jean-Pierre Kenne & Ali Gharbi, 2017. "Set-up and production planning in hybrid manufacturing–remanufacturing systems with large returns," International Journal of Production Research, Taylor & Francis Journals, vol. 55(13), pages 3766-3787, July.
    9. Dong, Yachao & Maravelias, Christos T., 2021. "Terminal inventory level constraints for online production scheduling," European Journal of Operational Research, Elsevier, vol. 295(1), pages 102-117.
    10. Hsueh, Che-Fu, 2011. "An inventory control model with consideration of remanufacturing and product life cycle," International Journal of Production Economics, Elsevier, vol. 133(2), pages 645-652, October.
    11. Zahraei, Seyed Mehdi & Teo, Chee-Chong, 2018. "Optimizing a recover-and-assemble remanufacturing system with production smoothing," International Journal of Production Economics, Elsevier, vol. 197(C), pages 330-341.
    12. Gernot Lechner & Marc Reimann, 2013. "The effect of active used product acquisition on manufacturing and remanufacturing strategies," Working Paper Series, Social and Economic Sciences 2013-01, Faculty of Social and Economic Sciences, Karl-Franzens-University Graz.
    13. Pokharel, Shaligram & Mutha, Akshay, 2009. "Perspectives in reverse logistics: A review," Resources, Conservation & Recycling, Elsevier, vol. 53(4), pages 175-182.
    14. Kilic, Onur A. & Tunc, Huseyin & Tarim, S. Armagan, 2018. "Heuristic policies for the stochastic economic lot sizing problem with remanufacturing under service level constraints," European Journal of Operational Research, Elsevier, vol. 267(3), pages 1102-1109.
    15. van der Laan, E.A. & Teunter, R.H., 2004. "Simple heuristics for push and pull remanufacturing policies," Econometric Institute Research Papers EI 2004-34, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    16. van der Laan, Erwin, 2003. "An NPV and AC analysis of a stochastic inventory system with joint manufacturing and remanufacturing," International Journal of Production Economics, Elsevier, vol. 81(1), pages 317-331, January.
    17. Flapper, Simme Douwe & Gayon, Jean-Philippe & Lim, Lâm Laurent, 2014. "On the optimal control of manufacturing and remanufacturing activities with a single shared server," European Journal of Operational Research, Elsevier, vol. 234(1), pages 86-98.
    18. Inderfurth, Karl, 2004. "Optimal policies in hybrid manufacturing/remanufacturing systems with product substitution," International Journal of Production Economics, Elsevier, vol. 90(3), pages 325-343, August.
    19. De Giovanni, Pietro & Zaccour, Georges, 2014. "A two-period game of a closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 232(1), pages 22-40.
    20. Teunter, R.H. & van der Laan, E.A., 2003. "Valuation of inventories in systems with product recovery," Econometric Institute Research Papers EI 2003-29, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    21. de Brito, M.P. & Dekker, R., 2001. "Modelling product returns in inventory control - exploring the validity or general assumptions," Econometric Institute Research Papers EI 2001-27, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    22. Jonathan Sze Choong Low & Yen Ting Ng, 2018. "Improving the Economic Performance of Remanufacturing Systems through Flexible Design Strategies: A Case Study Based on Remanufacturing Laptop Computers for the Cambodian Market," Business Strategy and the Environment, Wiley Blackwell, vol. 27(4), pages 503-527, May.
    23. Kim, Eungab & Saghafian, Soroush & Van Oyen, Mark P., 2013. "Joint control of production, remanufacturing, and disposal activities in a hybrid manufacturing–remanufacturing system," European Journal of Operational Research, Elsevier, vol. 231(2), pages 337-348.
    24. Gregory A. DeCroix, 2006. "Optimal Policy for a Multiechelon Inventory System with Remanufacturing," Operations Research, INFORMS, vol. 54(3), pages 532-543, June.
    25. Krikke, H.R. & van der Laan, E., 2009. "Last Time Buy and Control Policies With Phase-Out Returns : A Case Study in Plant Control Systems," Discussion Paper 2009-66, Tilburg University, Center for Economic Research.
    26. Sunder Kekre & Uday S. Rao & Jayashankar M. Swaminathan & Jun Zhang, 2003. "Reconfiguring a Remanufacturing Line at Visteon, Mexico," Interfaces, INFORMS, vol. 33(6), pages 30-43, December.
    27. Milind Dawande & Mili Mehrotra & Vijay Mookerjee & Chelliah Sriskandarajah, 2010. "An Analysis of Coordination Mechanisms for the U.S. Cash Supply Chain," Management Science, INFORMS, vol. 56(3), pages 553-570, March.
    28. Xiting Gong & Xiuli Chao, 2013. "Technical Note---Optimal Control Policy for Capacitated Inventory Systems with Remanufacturing," Operations Research, INFORMS, vol. 61(3), pages 603-611, June.
    29. Wei, Cansheng & Li, Yongjian & Cai, Xiaoqiang, 2011. "Robust optimal policies of production and inventory with uncertain returns and demand," International Journal of Production Economics, Elsevier, vol. 134(2), pages 357-367, December.
    30. Mahadevan, B. & Pyke, David F. & Fleischmann, Moritz, 2003. "Periodic review, push inventory policies for remanufacturing," European Journal of Operational Research, Elsevier, vol. 151(3), pages 536-551, December.
    31. Jian Yang & Boaz Golany & Gang Yu, 2005. "A concave‐cost production planning problem with remanufacturing options," Naval Research Logistics (NRL), John Wiley & Sons, vol. 52(5), pages 443-458, August.
    32. Ponte, Borja & Dominguez, Roberto & Cannella, Salvatore & Framinan, Jose M., 2022. "The implications of batching in the bullwhip effect and customer service of closed-loop supply chains," International Journal of Production Economics, Elsevier, vol. 244(C).
    33. Roland Geyer & Luk N. Van Wassenhove & Atalay Atasu, 2007. "The Economics of Remanufacturing Under Limited Component Durability and Finite Product Life Cycles," Management Science, INFORMS, vol. 53(1), pages 88-100, January.
    34. Z P Bayındır & N Erkip & R Güllü, 2005. "Assessing the benefits of remanufacturing option under one-way substitution," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(3), pages 286-296, March.
    35. Soumita Kundu & Tripti Chakrabarti & Dipak Kumar Jana, 2014. "Optimal Manufacturing-Remanufacturing Production Policy for a Closed-Loop Supply Chain under Fill Rate and Budget Constraint in Bifuzzy Environments," International Journal of Mathematics and Mathematical Sciences, Hindawi, vol. 2014, pages 1-14, June.
    36. Corbacioglu, Umut & van der Laan, Erwin A., 2007. "Setting the holding cost rates in a two-product system with remanufacturing," International Journal of Production Economics, Elsevier, vol. 109(1-2), pages 185-194, September.
    37. Huang, Shui-Mu & Su, Jack C.P., 2013. "Impact of product proliferation on the reverse supply chain," Omega, Elsevier, vol. 41(3), pages 626-639.
    38. Robotis, Andreas & Boyaci, Tamer & Verter, Vedat, 2012. "Investing in reusability of products of uncertain remanufacturing cost: The role of inspection capabilities," International Journal of Production Economics, Elsevier, vol. 140(1), pages 385-395.
    39. Cai, Xiaoqiang & Lai, Minghui & Li, Xiang & Li, Yongjian & Wu, Xianyi, 2014. "Optimal acquisition and production policy in a hybrid manufacturing/remanufacturing system with core acquisition at different quality levels," European Journal of Operational Research, Elsevier, vol. 233(2), pages 374-382.
    40. Sean X. Zhou & Yikun Yu, 2011. "TECHNICAL NOTE---Optimal Product Acquisition, Pricing, and Inventory Management for Systems with Remanufacturing," Operations Research, INFORMS, vol. 59(2), pages 514-521, April.
    41. Laurens G. Debo & L. Beril Toktay & Luk N. Van Wassenhove, 2005. "Market Segmentation and Product Technology Selection for Remanufacturable Products," Management Science, INFORMS, vol. 51(8), pages 1193-1205, August.
    42. Hosoda, Takamichi & Disney, Stephen M. & Gavirneni, Srinagesh, 2015. "The impact of information sharing, random yield, correlation, and lead times in closed loop supply chains," European Journal of Operational Research, Elsevier, vol. 246(3), pages 827-836.
    43. Shi, Jianmai & Zhang, Guoqing & Sha, Jichang, 2011. "Optimal production and pricing policy for a closed loop system," Resources, Conservation & Recycling, Elsevier, vol. 55(6), pages 639-647.
    44. Sebnem Ahiska, S. & King, Russell E., 2010. "Inventory optimization in a one product recoverable manufacturing system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 11-19, March.
    45. de Koster, M.B.M. & de Brito, M.P. & van de Vendel, M.A., 2002. "How to organise return handling; an exploratory study with nine retailer warehouses," Econometric Institute Research Papers EI 2002-11, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    46. Nativi, Juan Jose & Lee, Seokcheon, 2012. "Impact of RFID information-sharing strategies on a decentralized supply chain with reverse logistics operations," International Journal of Production Economics, Elsevier, vol. 136(2), pages 366-377.
    47. Teunter, R.H. & van der Laan, E.A. & Vlachos, D., 2002. "Inventory strategies for systems with fast remanufacturing," ERIM Report Series Research in Management ERS-2002-77-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    48. Bayindir, Z. Pelin & Erkip, Nesim & Gullu, Refik, 2003. "A model to evaluate inventory costs in a remanufacturing environment," International Journal of Production Economics, Elsevier, vol. 81(1), pages 597-607, January.
    49. Huynh, Candice H. & So, Kut C. & Gurnani, Haresh, 2016. "Managing a closed-loop supply system with random returns and a cyclic delivery schedule," European Journal of Operational Research, Elsevier, vol. 255(3), pages 787-796.
    50. Feng, Yan & Viswanathan, S., 2014. "Heuristics with guaranteed performance bounds for a manufacturing system with product recovery," European Journal of Operational Research, Elsevier, vol. 232(2), pages 322-329.
    51. Fleischmann, M. & van Nunen, J.A.E.E. & Graeve, B., 2002. "Integrating Closed-loop Supply Chains and Spare Parts Management at IBM," ERIM Report Series Research in Management ERS-2002-107-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    52. Sajad Karimi & Zaniar Ardalan & Omid Poursabzi & B. Naderi, 2023. "Toward a safe supply chain: Incorporating accident, physical, psychosocial and mental overload risks into supply chain network," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 25(6), pages 5579-5595, June.
    53. Wenyuan Wang & Daniel Y. Mo & Yue Wang & Mitchell M. Tseng, 2019. "Assessing the cost structure of component reuse in a product family for remanufacturing," Journal of Intelligent Manufacturing, Springer, vol. 30(2), pages 575-587, February.
    54. Ahiska, S. Sebnem & King, Russell E., 2010. "Life cycle inventory policy characterizations for a single-product recoverable system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 51-61, March.
    55. Ponte, Borja & Cannella, Salvatore & Dominguez, Roberto & Naim, Mohamed M. & Syntetos, Aris A., 2021. "Quality grading of returns and the dynamics of remanufacturing," International Journal of Production Economics, Elsevier, vol. 236(C).
    56. Lin, Junyi & Zhou, Li & Spiegler, Virginia L.M. & Naim, Mohamed M. & Syntetos, Aris, 2022. "Push or Pull? The impact of ordering policy choice on the dynamics of a hybrid closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 300(1), pages 282-295.
    57. Sean X. Zhou & Zhijie Tao & Xiuli Chao, 2011. "Optimal Control of Inventory Systems with Multiple Types of Remanufacturable Products," Manufacturing & Service Operations Management, INFORMS, vol. 13(1), pages 20-34, March.
    58. Fleischmann, Moritz & Kuik, Roelof & Dekker, Rommert, 2002. "Controlling inventories with stochastic item returns: A basic model," European Journal of Operational Research, Elsevier, vol. 138(1), pages 63-75, April.
    59. Geraldo Ferrer & Jayashankar M. Swaminathan, 2006. "Managing New and Remanufactured Products," Management Science, INFORMS, vol. 52(1), pages 15-26, January.
    60. Assid, M. & Gharbi, A. & Hajji, A., 2020. "Production control of failure-prone manufacturing-remanufacturing systems using mixed dedicated and shared facilities," International Journal of Production Economics, Elsevier, vol. 224(C).
    61. Chen, Jen-Ming & Chang, Chia-I, 2012. "The co-opetitive strategy of a closed-loop supply chain with remanufacturing," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 48(2), pages 387-400.
    62. Devika, K. & Jafarian, A. & Nourbakhsh, V., 2014. "Designing a sustainable closed-loop supply chain network based on triple bottom line approach: A comparison of metaheuristics hybridization techniques," European Journal of Operational Research, Elsevier, vol. 235(3), pages 594-615.
    63. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    64. V. Daniel R. Guide & Luk N. Van Wassenhove, 2009. "OR FORUM---The Evolution of Closed-Loop Supply Chain Research," Operations Research, INFORMS, vol. 57(1), pages 10-18, February.
    65. Sungwook Yoon & Sukjae Jeong, 2017. "Investment Strategy in a Closed Loop Supply Chain: The Case of a Market with Competition between Two Retailers," Sustainability, MDPI, vol. 9(10), pages 1-32, September.
    66. Duong, Quang Huy & Zhou, Li & Meng, Meng & Nguyen, Truong Van & Ieromonachou, Petros & Nguyen, Duy Tiep, 2022. "Understanding product returns: A systematic literature review using machine learning and bibliometric analysis," International Journal of Production Economics, Elsevier, vol. 243(C).
    67. Prahinski, Carol & Kocabasoglu, Canan, 2006. "Empirical research opportunities in reverse supply chains," Omega, Elsevier, vol. 34(6), pages 519-532, December.
    68. Zhixin Chen & Shijian Hong & Xiang Ji & Ruixia Shi & Jie Wu, 2022. "Refurbished products and supply chain incentives," Annals of Operations Research, Springer, vol. 310(1), pages 27-47, March.
    69. Kate J. Li & Duncan K. H. Fong & Susan H. Xu, 2011. "Managing Trade-in Programs Based on Product Characteristics and Customer Heterogeneity in Business-to-Business Markets," Manufacturing & Service Operations Management, INFORMS, vol. 13(1), pages 108-123, October.
    70. Polotski, Vladimir & Kenne, Jean-Pierre & Gharbi, Ali, 2017. "Production and setup policy optimization for hybrid manufacturing–remanufacturing systems," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 322-333.
    71. Ye, Yu-Sen & Ma, Zu-Jun & Dai, Ying, 2016. "The price of anarchy in competitive reverse supply chains with quality-dependent price-only contracts," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 89(C), pages 86-107.
    72. Linton, Jonathan D. & Yeomans, J. Scott & Yoogalingam, Reena, 2005. "Recovery and reclamation of durable goods: a study of television CRTs," Resources, Conservation & Recycling, Elsevier, vol. 43(4), pages 337-352.
    73. Tang, Christopher S. & Zhou, Sean, 2012. "Research advances in environmentally and socially sustainable operations," European Journal of Operational Research, Elsevier, vol. 223(3), pages 585-594.

  17. van der Laan, Erwin & Salomon, Marc & Dekker, Rommert, 1999. "An investigation of lead-time effects in manufacturing/remanufacturing systems under simple PUSH and PULL control strategies," European Journal of Operational Research, Elsevier, vol. 115(1), pages 195-214, May.

    Cited by:

    1. Ta-Yu Chen & Woo-Tsong Lin & Chwen Sheu, 2018. "A Dynamic Failure Rate Forecasting Model for Service Parts Inventory," Sustainability, MDPI, vol. 10(7), pages 1-23, July.
    2. Tang, Ou & Grubbstrom, Robert W., 2005. "Considering stochastic lead times in a manufacturing/remanufacturing system with deterministic demands and returns," International Journal of Production Economics, Elsevier, vol. 93(1), pages 285-300, January.
    3. Zhou, Li & Naim, Mohamed M. & Disney, Stephen M., 2017. "The impact of product returns and remanufacturing uncertainties on the dynamic performance of a multi-echelon closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 487-502.
    4. Hsueh, Che-Fu, 2011. "An inventory control model with consideration of remanufacturing and product life cycle," International Journal of Production Economics, Elsevier, vol. 133(2), pages 645-652, October.
    5. Kiesmuller, G. P., 2003. "A new approach for controlling a hybrid stochastic manufacturing/remanufacturing system with inventories and different leadtimes," European Journal of Operational Research, Elsevier, vol. 147(1), pages 62-71, May.
    6. María Arquer & Borja Ponte & Raúl Pino, 2022. "Examining the balance between efficiency and resilience in closed-loop supply chains," Central European Journal of Operations Research, Springer;Slovak Society for Operations Research;Hungarian Operational Research Society;Czech Society for Operations Research;Österr. Gesellschaft für Operations Research (ÖGOR);Slovenian Society Informatika - Section for Operational Research;Croatian Operational Research Society, vol. 30(4), pages 1307-1336, December.
    7. Kim, Eungab & Saghafian, Soroush & Van Oyen, Mark P., 2013. "Joint control of production, remanufacturing, and disposal activities in a hybrid manufacturing–remanufacturing system," European Journal of Operational Research, Elsevier, vol. 231(2), pages 337-348.
    8. Fei Zhang & Zailin Guan & Li Zhang & Yanyan Cui & Pengxing Yi & Saif Ullah, 2019. "Inventory management for a remanufacture-to-order production with multi-components (parts)," Journal of Intelligent Manufacturing, Springer, vol. 30(1), pages 59-78, January.
    9. Jian Yang & Boaz Golany & Gang Yu, 2005. "A concave‐cost production planning problem with remanufacturing options," Naval Research Logistics (NRL), John Wiley & Sons, vol. 52(5), pages 443-458, August.
    10. Z P Bayındır & N Erkip & R Güllü, 2005. "Assessing the benefits of remanufacturing option under one-way substitution," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(3), pages 286-296, March.
    11. Tang, Ou & Grubbstrom, Robert W. & Zanoni, Simone, 2007. "Planned lead time determination in a make-to-order remanufacturing system," International Journal of Production Economics, Elsevier, vol. 108(1-2), pages 426-435, July.
    12. Hosoda, Takamichi & Disney, Stephen M. & Gavirneni, Srinagesh, 2015. "The impact of information sharing, random yield, correlation, and lead times in closed loop supply chains," European Journal of Operational Research, Elsevier, vol. 246(3), pages 827-836.
    13. Amirmohsen Golmohammadi & Alireza Tajbakhsh & Mohamed Dia & Pawoumodom M. Takouda, 2022. "Effect of timing on reliability improvement and ordering decisions in a decentralized assembly system," Annals of Operations Research, Springer, vol. 312(1), pages 159-192, May.
    14. Nativi, Juan Jose & Lee, Seokcheon, 2012. "Impact of RFID information-sharing strategies on a decentralized supply chain with reverse logistics operations," International Journal of Production Economics, Elsevier, vol. 136(2), pages 366-377.
    15. Bayindir, Z. Pelin & Erkip, Nesim & Gullu, Refik, 2003. "A model to evaluate inventory costs in a remanufacturing environment," International Journal of Production Economics, Elsevier, vol. 81(1), pages 597-607, January.
    16. Kiesmuller, G. P., 2003. "Optimal control of a one product recovery system with leadtimes," International Journal of Production Economics, Elsevier, vol. 81(1), pages 333-340, January.
    17. Elnaz Kanani Kuchesfehani & Elena M. Parilina & Georges Zaccour, 2023. "Revenue and cost sharing contract in a dynamic closed-loop supply chain with uncertain parameters," Annals of Operations Research, Springer, vol. 322(2), pages 851-877, March.
    18. Erwin van der Laan & Marc Salomon & Rommert Dekker & Luk Van Wassenhove, 1999. "Inventory Control in Hybrid Systems with Remanufacturing," Management Science, INFORMS, vol. 45(5), pages 733-747, May.
    19. Ahiska, S. Sebnem & King, Russell E., 2010. "Life cycle inventory policy characterizations for a single-product recoverable system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 51-61, March.
    20. Ponte, Borja & Cannella, Salvatore & Dominguez, Roberto & Naim, Mohamed M. & Syntetos, Aris A., 2021. "Quality grading of returns and the dynamics of remanufacturing," International Journal of Production Economics, Elsevier, vol. 236(C).
    21. Nenes, George & Panagiotidou, Sofia & Dekker, Rommert, 2010. "Inventory control policies for inspection and remanufacturing of returns: A case study," International Journal of Production Economics, Elsevier, vol. 125(2), pages 300-312, June.
    22. Hosoda, Takamichi & Disney, Stephen M., 2018. "A unified theory of the dynamics of closed-loop supply chains," European Journal of Operational Research, Elsevier, vol. 269(1), pages 313-326.
    23. Hosoda, Takamichi & Disney, Stephen M. & Zhou, Li, 2021. "The yield rate paradox in closed-loop supply chains," International Journal of Production Economics, Elsevier, vol. 239(C).
    24. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    25. Pinçe, Çerag & Gürler, Ülkü & Berk, Emre, 2008. "A continuous review replenishment-disposal policy for an inventory system with autonomous supply and fixed disposal costs," European Journal of Operational Research, Elsevier, vol. 190(2), pages 421-442, October.
    26. Sheu, Jiuh-Biing & Chen, Yenming J., 2012. "Impact of government financial intervention on competition among green supply chains," International Journal of Production Economics, Elsevier, vol. 138(1), pages 201-213.
    27. Bayindir, Z.P. & Erkip, N. & Gullu, R., 2003. "Assessing the benefits of remanufacturing option under one-way substitution and capacity constraint," Econometric Institute Research Papers EI 2003-19, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    28. Kozlovskaya, Nadezhda & Pakhomova, Nadezhda & Richter, Knut, 2016. "A general production and recovery EOQ model with stationary demand and return rates," Discussion Papers 378, European University Viadrina Frankfurt (Oder), Department of Business Administration and Economics.

  18. Ad Ridder & Erwin van der Laan & Marc Salomon, 1998. "How Larger Demand Variability May Lead to Lower Costs in the Newsvendor Problem," Operations Research, INFORMS, vol. 46(6), pages 934-936, December.
    See citations under working paper version above.
  19. van der Laan, Erwin & Salomon, Marc, 1997. "Production planning and inventory control with remanufacturing and disposal," European Journal of Operational Research, Elsevier, vol. 102(2), pages 264-278, October.

    Cited by:

    1. Fleischmann, Moritz & Kuik, Roelof, 2003. "On optimal inventory control with independent stochastic item returns," European Journal of Operational Research, Elsevier, vol. 151(1), pages 25-37, November.
    2. Hsueh, Che-Fu, 2011. "An inventory control model with consideration of remanufacturing and product life cycle," International Journal of Production Economics, Elsevier, vol. 133(2), pages 645-652, October.
    3. Zahraei, Seyed Mehdi & Teo, Chee-Chong, 2018. "Optimizing a recover-and-assemble remanufacturing system with production smoothing," International Journal of Production Economics, Elsevier, vol. 197(C), pages 330-341.
    4. Lenhard, Severin, 2022. "Imperfect competition with costly disposal," International Journal of Industrial Organization, Elsevier, vol. 82(C).
    5. Teunter, Ruud H. & Vlachos, Dimitrios, 2002. "On the necessity of a disposal option for returned items that can be remanufactured," International Journal of Production Economics, Elsevier, vol. 75(3), pages 257-266, February.
    6. Gayon, Jean-Philippe & Vercraene, Samuel & Flapper, Simme Douwe P., 2017. "Optimal control of a production-inventory system with product returns and two disposal options," European Journal of Operational Research, Elsevier, vol. 262(2), pages 499-508.
    7. Kiesmuller, G. P., 2003. "A new approach for controlling a hybrid stochastic manufacturing/remanufacturing system with inventories and different leadtimes," European Journal of Operational Research, Elsevier, vol. 147(1), pages 62-71, May.
    8. De Giovanni, Pietro & Zaccour, Georges, 2014. "A two-period game of a closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 232(1), pages 22-40.
    9. W-K Ching & W-O Yuen & A W Loh, 2003. "An inventory model with returns and lateral transshipments," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 54(6), pages 636-641, June.
    10. Kim, Eungab & Saghafian, Soroush & Van Oyen, Mark P., 2013. "Joint control of production, remanufacturing, and disposal activities in a hybrid manufacturing–remanufacturing system," European Journal of Operational Research, Elsevier, vol. 231(2), pages 337-348.
    11. Vercraene, Samuel & Gayon, Jean-Philippe, 2013. "Optimal control of a production-inventory system with productreturns," International Journal of Production Economics, Elsevier, vol. 142(2), pages 302-310.
    12. Gregory A. DeCroix, 2006. "Optimal Policy for a Multiechelon Inventory System with Remanufacturing," Operations Research, INFORMS, vol. 54(3), pages 532-543, June.
    13. Inderfurth, K. & de Kok, A. G. & Flapper, S. D. P., 2001. "Product recovery in stochastic remanufacturing systems with multiple reuse options," European Journal of Operational Research, Elsevier, vol. 133(1), pages 130-152, August.
    14. Leonidas Milios & Mitsutaka Matsumoto, 2019. "Consumer Perception of Remanufactured Automotive Parts and Policy Implications for Transitioning to a Circular Economy in Sweden," Sustainability, MDPI, vol. 11(22), pages 1-15, November.
    15. Jian Yang & Boaz Golany & Gang Yu, 2005. "A concave‐cost production planning problem with remanufacturing options," Naval Research Logistics (NRL), John Wiley & Sons, vol. 52(5), pages 443-458, August.
    16. Z P Bayındır & N Erkip & R Güllü, 2005. "Assessing the benefits of remanufacturing option under one-way substitution," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(3), pages 286-296, March.
    17. Mabel C. Chou & Chee-Khian Sim & Xue-Ming Yuan, 2020. "Policies for inventory models with product returns forecast from past demands and past sales," Annals of Operations Research, Springer, vol. 288(1), pages 137-180, May.
    18. Gouda, Sirish Kumar & Jonnalagedda, Sreelata & Saranga, Haritha, 2016. "Design for the environment: Impact of regulatory policies on product development," European Journal of Operational Research, Elsevier, vol. 248(2), pages 558-570.
    19. van der Laan, E.A. & Kiesmueller, G.P., 2001. "An Inventory Model with Dependent Product Demands and Returns," ERIM Report Series Research in Management ERS-2001-16-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    20. Lenhard, Severin, 2022. "Imperfect Competition with Costly Disposal," VfS Annual Conference 2022 (Basel): Big Data in Economics 264038, Verein für Socialpolitik / German Economic Association.
    21. Sebnem Ahiska, S. & King, Russell E., 2010. "Inventory optimization in a one product recoverable manufacturing system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 11-19, March.
    22. Minner, Stefan, 2001. "Strategic safety stocks in reverse logistics supply chains," International Journal of Production Economics, Elsevier, vol. 71(1-3), pages 417-428, May.
    23. Chang Fang & Xinbao Liu & Panos M. Pardalos & Jianyu Long & Jun Pei & Chao Zuo, 2017. "A stochastic production planning problem in hybrid manufacturing and remanufacturing systems with resource capacity planning," Journal of Global Optimization, Springer, vol. 68(4), pages 851-878, August.
    24. Bayindir, Z. Pelin & Erkip, Nesim & Gullu, Refik, 2003. "A model to evaluate inventory costs in a remanufacturing environment," International Journal of Production Economics, Elsevier, vol. 81(1), pages 597-607, January.
    25. Kiesmuller, Gudrun P. & Scherer, Carsten W., 2003. "Computational issues in a stochastic finite horizon one product recovery inventory model," European Journal of Operational Research, Elsevier, vol. 146(3), pages 553-579, May.
    26. Kiesmuller, G. P., 2003. "Optimal control of a one product recovery system with leadtimes," International Journal of Production Economics, Elsevier, vol. 81(1), pages 333-340, January.
    27. Seifert, Ralf W. & Tancrez, Jean-Sébastien & Biçer, Işık, 2016. "Dynamic product portfolio management with life cycle considerations," International Journal of Production Economics, Elsevier, vol. 171(P1), pages 71-83.
    28. Ferrer, Geraldo, 2003. "Yield information and supplier responsiveness in remanufacturing operations," European Journal of Operational Research, Elsevier, vol. 149(3), pages 540-556, September.
    29. Toktay, Latife Beril, 1970- & Wein, Lawrence A. & Zenios, Stefanos A., 1997. "Inventory management of remanufacturable products," Working papers WP 3965-97., Massachusetts Institute of Technology (MIT), Sloan School of Management.
    30. Erwin van der Laan & Marc Salomon & Rommert Dekker & Luk Van Wassenhove, 1999. "Inventory Control in Hybrid Systems with Remanufacturing," Management Science, INFORMS, vol. 45(5), pages 733-747, May.
    31. Ahiska, S. Sebnem & King, Russell E., 2010. "Life cycle inventory policy characterizations for a single-product recoverable system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 51-61, March.
    32. Teunter, R.H. & Bayindir, Z.P. & van den Heuvel, W., 2005. "Dynamic lot sizing with product returns," Econometric Institute Research Papers EI 2005-17, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    33. Deepak Singhal & Sarat Kumar Jena & Satyabrata Aich & Sushanta Tripathy & Hee-Cheol Kim, 2021. "Remanufacturing for Circular Economy: Understanding the Impact of Manufacturer’s Incentive under Price Competition," Sustainability, MDPI, vol. 13(21), pages 1-19, October.
    34. Kaya, Onur, 2010. "Incentive and production decisions for remanufacturing operations," European Journal of Operational Research, Elsevier, vol. 201(2), pages 442-453, March.
    35. Fleischmann, Moritz & Kuik, Roelof & Dekker, Rommert, 2002. "Controlling inventories with stochastic item returns: A basic model," European Journal of Operational Research, Elsevier, vol. 138(1), pages 63-75, April.
    36. Ching-Chin Chern & Hsin-Mei Wang & Kwei-Long Huang, 2017. "A heuristic master planning algorithm for recycling supply chain management," Journal of Intelligent Manufacturing, Springer, vol. 28(4), pages 985-1003, April.
    37. Nenes, George & Panagiotidou, Sofia & Dekker, Rommert, 2010. "Inventory control policies for inspection and remanufacturing of returns: A case study," International Journal of Production Economics, Elsevier, vol. 125(2), pages 300-312, June.
    38. Inderfurth, Karl & van der Laan, Erwin, 2001. "Leadtime effects and policy improvement for stochastic inventory control with remanufacturing," International Journal of Production Economics, Elsevier, vol. 71(1-3), pages 381-390, May.
    39. G P Kiesmüller & S Minner, 2003. "Simple expressions for finding recovery system inventory control parameter values," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 54(1), pages 83-88, January.
    40. Vercraene, Samuel & Gayon, Jean-Philippe & Flapper, Simme Douwe, 2014. "Coordination of manufacturing, remanufacturing and returns acceptance in hybrid manufacturing/remanufacturing systems," International Journal of Production Economics, Elsevier, vol. 148(C), pages 62-70.
    41. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    42. Pinçe, Çerag & Gürler, Ülkü & Berk, Emre, 2008. "A continuous review replenishment-disposal policy for an inventory system with autonomous supply and fixed disposal costs," European Journal of Operational Research, Elsevier, vol. 190(2), pages 421-442, October.
    43. Severin Lenhard, 2021. "Imperfect Competition with Costly Disposal," Diskussionsschriften dp2105, Universitaet Bern, Departement Volkswirtschaft.
    44. Prahinski, Carol & Kocabasoglu, Canan, 2006. "Empirical research opportunities in reverse supply chains," Omega, Elsevier, vol. 34(6), pages 519-532, December.
    45. V. Daniel R. Guide & Vaidyanathan Jayaraman & Rajesh Srivastava & W. C. Benton, 2000. "Supply-Chain Management for Recoverable Manufacturing Systems," Interfaces, INFORMS, vol. 30(3), pages 125-142, June.
    46. Bayindir, Z.P. & Erkip, N. & Gullu, R., 2003. "Assessing the benefits of remanufacturing option under one-way substitution and capacity constraint," Econometric Institute Research Papers EI 2003-19, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    47. Antonio MIHI-RAMIREZ & Jesús ARTEAGA-ORTIZ, 2007. "Reverse Logistics as Source of Competitive Advantages and its Relationship with Total Quality Management," Economics and Applied Informatics, "Dunarea de Jos" University of Galati, Faculty of Economics and Business Administration, issue 1, pages 99-106.
    48. Dev, Navin K. & Shankar, Ravi & Choudhary, Alok, 2017. "Strategic design for inventory and production planning in closed-loop hybrid systems," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 345-353.
    49. Linton, Jonathan D. & Yeomans, J. Scott & Yoogalingam, Reena, 2005. "Recovery and reclamation of durable goods: a study of television CRTs," Resources, Conservation & Recycling, Elsevier, vol. 43(4), pages 337-352.
    50. Kleber, Rainer & Minner, Stefan & Kiesmuller, Gudrun, 2002. "A continuous time inventory model for a product recovery system with multiple options," International Journal of Production Economics, Elsevier, vol. 79(2), pages 121-141, September.

  20. Fleischmann, Moritz & Bloemhof-Ruwaard, Jacqueline M. & Dekker, Rommert & van der Laan, Erwin & van Nunen, Jo A. E. E. & Van Wassenhove, Luk N., 1997. "Quantitative models for reverse logistics: A review," European Journal of Operational Research, Elsevier, vol. 103(1), pages 1-17, November.

    Cited by:

    1. Chen, Chialin & Monahan, George E., 2010. "Environmental safety stock: The impacts of regulatory and voluntary control policies on production planning, inventory control, and environmental performance," European Journal of Operational Research, Elsevier, vol. 207(3), pages 1280-1292, December.
    2. Wang, Ziping & Yao, Dong-Qing & Huang, Peiqing, 2007. "A new location-inventory policy with reverse logistics applied to B2C e-markets of China," International Journal of Production Economics, Elsevier, vol. 107(2), pages 350-363, June.
    3. Gou, Qinglong & Liang, Liang & Huang, Zhimin & Xu, Chuanyong, 2008. "A joint inventory model for an open-loop reverse supply chain," International Journal of Production Economics, Elsevier, vol. 116(1), pages 28-42, November.
    4. Yıldız, Gazi Bilal & Soylu, Banu, 2019. "A multiobjective post-sales guarantee and repair services network design problem," International Journal of Production Economics, Elsevier, vol. 216(C), pages 305-320.
    5. Ferrer, Geraldo & Swaminathan, Jayashankar M., 2010. "Managing new and differentiated remanufactured products," European Journal of Operational Research, Elsevier, vol. 203(2), pages 370-379, June.
    6. Polotski, V. & Kenne, J.-P. & Gharbi, A., 2019. "Joint production and maintenance optimization in flexible hybrid Manufacturing–Remanufacturing systems under age-dependent deterioration," International Journal of Production Economics, Elsevier, vol. 216(C), pages 239-254.
    7. Liu, Huihui & Lei, Ming & Deng, Honghui & Keong Leong, G. & Huang, Tao, 2016. "A dual channel, quality-based price competition model for the WEEE recycling market with government subsidy," Omega, Elsevier, vol. 59(PB), pages 290-302.
    8. Sara Al-Haidous & Tareq Al-Ansari, 2019. "Sustainable Liquefied Natural Gas Supply Chain Management: A Review of Quantitative Models," Sustainability, MDPI, vol. 12(1), pages 1-23, December.
    9. Zhou, Li & Naim, Mohamed M. & Ou Tang & Towill, Denis R., 2006. "Dynamic performance of a hybrid inventory system with a Kanban policy in remanufacturing process," Omega, Elsevier, vol. 34(6), pages 585-598, December.
    10. Thomas Sloan, 2007. "Safety-cost trade-offs in medical device reuse: a Markov decision process model," Health Care Management Science, Springer, vol. 10(1), pages 81-93, February.
    11. Kumar, V.N.S.A. & Kumar, V. & Brady, M. & Garza-Reyes, Jose Arturo & Simpson, M., 2017. "Resolving forward-reverse logistics multi-period model using evolutionary algorithms," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 458-469.
    12. Gopalakrishnan Easwaran & Halit Üster, 2009. "Tabu Search and Benders Decomposition Approaches for a Capacitated Closed-Loop Supply Chain Network Design Problem," Transportation Science, INFORMS, vol. 43(3), pages 301-320, August.
    13. Van der Heide, G. & Roodbergen, K.J., 2013. "Transshipment and rebalancing policies for library books," European Journal of Operational Research, Elsevier, vol. 228(2), pages 447-456.
    14. Liao, Haolan & Zhang, Qingyu & Shen, Neng & Nie, Yongyou & Li, Lu, 2021. "Coordination between forward and reverse production streams for maximum profitability," Omega, Elsevier, vol. 104(C).
    15. ReVelle, C. S. & Eiselt, H. A., 2005. "Location analysis: A synthesis and survey," European Journal of Operational Research, Elsevier, vol. 165(1), pages 1-19, August.
    16. Chan, Chi Kin & Man, Nora & Fang, Fei & Campbell, J.F., 2020. "Supply chain coordination with reverse logistics: A vendor/recycler-buyer synchronized cycles model," Omega, Elsevier, vol. 95(C).
    17. Tang, Ou & Grubbstrom, Robert W., 2005. "Considering stochastic lead times in a manufacturing/remanufacturing system with deterministic demands and returns," International Journal of Production Economics, Elsevier, vol. 93(1), pages 285-300, January.
    18. Talat Genc & Pietro De Giovanni, 2018. "Closed-loop Supply Chain Games with Innovation-led Lean Programs and Sustainability," Working Papers 1803, University of Guelph, Department of Economics and Finance.
    19. Özceylan, Eren & Paksoy, Turan & Bektaş, Tolga, 2014. "Modeling and optimizing the integrated problem of closed-loop supply chain network design and disassembly line balancing," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 61(C), pages 142-164.
    20. Gołębiewski, Bronisław & Trajer, Jędrzej & Jaros, Małgorzata & Winiczenko, Radosław, 2013. "Modelling of the location of vehicle recycling facilities: A case study in Poland," Resources, Conservation & Recycling, Elsevier, vol. 80(C), pages 10-20.
    21. Abdelkader Sbihi & Richard Eglese, 2010. "Combinatorial optimization and Green Logistics," Annals of Operations Research, Springer, vol. 175(1), pages 159-175, March.
    22. Marcus Brandenburg & Tim Gruchmann & Nelly Oelze, 2019. "Sustainable Supply Chain Management—A Conceptual Framework and Future Research Perspectives," Sustainability, MDPI, vol. 11(24), pages 1-15, December.
    23. Gregory DeCroix & Jing-Sheng Song & Paul Zipkin, 2005. "A Series System with Returns: Stationary Analysis," Operations Research, INFORMS, vol. 53(2), pages 350-362, April.
    24. Van Engeland, Jens & Beliën, Jeroen & De Boeck, Liesje & De Jaeger, Simon, 2020. "Literature review: Strategic network optimization models in waste reverse supply chains," Omega, Elsevier, vol. 91(C).
    25. Fleischmann, Moritz & Kuik, Roelof, 2003. "On optimal inventory control with independent stochastic item returns," European Journal of Operational Research, Elsevier, vol. 151(1), pages 25-37, November.
    26. Ze-Bin Wang & Yao-Yu Wang & Jian-Cai Wang, 2016. "Optimal distribution channel strategy for new and remanufactured products," Electronic Commerce Research, Springer, vol. 16(2), pages 269-295, June.
    27. Zhiguo Wang & Lufei Huang & Cici Xiao He, 2021. "A multi-objective and multi-period optimization model for urban healthcare waste’s reverse logistics network design," Journal of Combinatorial Optimization, Springer, vol. 42(4), pages 785-812, November.
    28. K Katsaliaki & N Mustafee & Y K Dwivedi & T Williams & J M Wilson, 2010. "A profile of OR research and practice published in the Journal of the Operational Research Society," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 61(1), pages 82-94, January.
    29. Ruud H. Teunter, 2001. "Economic ordering quantities for recoverable item inventory systems," Naval Research Logistics (NRL), John Wiley & Sons, vol. 48(6), pages 484-495, September.
    30. de Brito, Marisa P. & van der Laan, Erwin A., 2009. "Inventory control with product returns: The impact of imperfect information," European Journal of Operational Research, Elsevier, vol. 194(1), pages 85-101, April.
    31. Vladimir Polotski & Jean-Pierre Kenne & Ali Gharbi, 2017. "Set-up and production planning in hybrid manufacturing–remanufacturing systems with large returns," International Journal of Production Research, Taylor & Francis Journals, vol. 55(13), pages 3766-3787, July.
    32. El Saadany, Ahmed M.A. & Jaber, Mohamad Y. & Bonney, Maurice, 2013. "How many times to remanufacture?," International Journal of Production Economics, Elsevier, vol. 143(2), pages 598-604.
    33. Niknejad, A. & Petrovic, D., 2014. "Optimisation of integrated reverse logistics networks with different product recovery routes," European Journal of Operational Research, Elsevier, vol. 238(1), pages 143-154.
    34. Boysen, Nils & Emde, Simon & Hoeck, Michael & Kauderer, Markus, 2015. "Part logistics in the automotive industry: Decision problems, literature review and research agenda," European Journal of Operational Research, Elsevier, vol. 242(1), pages 107-120.
    35. De Rosa, Vincenzo & Gebhard, Marina & Hartmann, Evi & Wollenweber, Jens, 2013. "Robust sustainable bi-directional logistics network design under uncertainty," International Journal of Production Economics, Elsevier, vol. 145(1), pages 184-198.
    36. Metin Türkay & Öztürk Saraçoğlu & Mehmet Can Arslan, 2016. "Sustainability in Supply Chain Management: Aggregate Planning from Sustainability Perspective," PLOS ONE, Public Library of Science, vol. 11(1), pages 1-18, January.
    37. Zahraei, Seyed Mehdi & Teo, Chee-Chong, 2018. "Optimizing a recover-and-assemble remanufacturing system with production smoothing," International Journal of Production Economics, Elsevier, vol. 197(C), pages 330-341.
    38. Xichen Sun & Michiyuki Yagi & Katsuhiko Kokubu, 2014. "Expanding the Horizon: An Empirical Study of Sustainable Supply Chain Management and Firm Performance," Discussion Papers 2014-30, Kobe University, Graduate School of Business Administration.
    39. Seoyoon Lee & Minjung Kwak, 2020. "Consumer Valuation of Remanufactured Products: A Comparative Study of Product Categories and Business Models," Sustainability, MDPI, vol. 12(18), pages 1-29, September.
    40. Prakash, Chandra & Barua, M.K., 2016. "An analysis of integrated robust hybrid model for third-party reverse logistics partner selection under fuzzy environment," Resources, Conservation & Recycling, Elsevier, vol. 108(C), pages 63-81.
    41. Gernot Lechner & Marc Reimann, 2013. "The effect of active used product acquisition on manufacturing and remanufacturing strategies," Working Paper Series, Social and Economic Sciences 2013-01, Faculty of Social and Economic Sciences, Karl-Franzens-University Graz.
    42. Teunter, Ruud H. & van der Laan, Erwin & Inderfurth, Karl, 2000. "How to set the holding cost rates in average cost inventory models with reverse logistics?," Omega, Elsevier, vol. 28(4), pages 409-415, August.
    43. Pokharel, Shaligram & Mutha, Akshay, 2009. "Perspectives in reverse logistics: A review," Resources, Conservation & Recycling, Elsevier, vol. 53(4), pages 175-182.
    44. Timo Hilger & Florian Sahling & Horst Tempelmeier, 2016. "Capacitated dynamic production and remanufacturing planning under demand and return uncertainty," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 38(4), pages 849-876, October.
    45. Antti Puurunen & Jukka Majava & Hanna Kropsu-Vehkapera & Pekka Kess, 2013. "Applicaability of the (Q,R)-Model in Maintenance Meterials Management," Diversity, Technology, and Innovation for Operational Competitiveness: Proceedings of the 2013 International Conference on Technology Innovation and Industrial Management,, ToKnowPress.
    46. Bulmuş, Serra Caner & Zhu, Stuart X. & Teunter, Ruud, 2013. "Capacity and production decisions under a remanufacturing strategy," International Journal of Production Economics, Elsevier, vol. 145(1), pages 359-370.
    47. Attila, Öykü Naz & Agra, Agostinho & Akartunalı, Kerem & Arulselvan, Ashwin, 2021. "Robust formulations for economic lot-sizing problem with remanufacturing," European Journal of Operational Research, Elsevier, vol. 288(2), pages 496-510.
    48. Mostafa Parsa & Ali Shahandeh Nookabadi & Zümbül Atan & Yaser Malekian, 2022. "An optimal inventory policy for a multi-echelon closed-loop supply chain of postconsumer recycled content products," Operational Research, Springer, vol. 22(3), pages 1887-1938, July.
    49. Canan Savaskan & Luk N. van Wassenhove, 2001. "The Strategic Decentralization of Reverse Channels and Prince Discrimination Through Buyback Payments," Discussion Papers 1329, Northwestern University, Center for Mathematical Studies in Economics and Management Science.
    50. Teunter, Ruud H. & Vlachos, Dimitrios, 2002. "On the necessity of a disposal option for returned items that can be remanufactured," International Journal of Production Economics, Elsevier, vol. 75(3), pages 257-266, February.
    51. Devika Kannan & Kiran Garg & P. C. Jha & Ali Diabat, 2017. "Integrating disassembly line balancing in the planning of a reverse logistics network from the perspective of a third party provider," Annals of Operations Research, Springer, vol. 253(1), pages 353-376, June.
    52. Zhou, Li & Xie, Jiaping & Gu, Xiaoyu & Lin, Yong & Ieromonachou, Petros & Zhang, Xiaole, 2016. "Forecasting return of used products for remanufacturing using Graphical Evaluation and Review Technique (GERT)," International Journal of Production Economics, Elsevier, vol. 181(PB), pages 315-324.
    53. Byung Duk Song & Young Dae Ko, 2017. "Effect of Inspection Policies and Residual Value of Collected Used Products: A Mathematical Model and Genetic Algorithm for a Closed-Loop Green Manufacturing System," Sustainability, MDPI, vol. 9(9), pages 1-14, September.
    54. Minjung Kwak, 2021. "Monte Carlo Simulation of the Effect of Heterogeneous Too-Cheap Prices on the Average Price Preference for Remanufactured Products," Sustainability, MDPI, vol. 13(17), pages 1-11, August.
    55. Diabat, Ali & Kannan, Devika & Kaliyan, Mathiyazhagan & Svetinovic, Davor, 2013. "An optimization model for product returns using genetic algorithms and artificial immune system," Resources, Conservation & Recycling, Elsevier, vol. 74(C), pages 156-169.
    56. van der Laan, E.A. & Teunter, R.H., 2004. "Simple heuristics for push and pull remanufacturing policies," Econometric Institute Research Papers EI 2004-34, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    57. Pati, Rupesh Kumar & Vrat, Prem & Kumar, Pradeep, 2006. "Economic analysis of paper recycling vis-a-vis wood as raw material," International Journal of Production Economics, Elsevier, vol. 103(2), pages 489-508, October.
    58. Rong-Huei Chen & Ru-Jen Lin & Yen-Ju Lin, 2013. "The Relationships Among Green Operations, Green Innovation, and Environmental Performance," Diversity, Technology, and Innovation for Operational Competitiveness: Proceedings of the 2013 International Conference on Technology Innovation and Industrial Management,, ToKnowPress.
    59. van der Laan, Erwin, 2003. "An NPV and AC analysis of a stochastic inventory system with joint manufacturing and remanufacturing," International Journal of Production Economics, Elsevier, vol. 81(1), pages 317-331, January.
    60. Vahab Vahdat & Mohammad Ali Vahdatzad, 2017. "Accelerated Benders’ Decomposition for Integrated Forward/Reverse Logistics Network Design under Uncertainty," Logistics, MDPI, vol. 1(2), pages 1-21, December.
    61. Flapper, Simme Douwe & Gayon, Jean-Philippe & Lim, Lâm Laurent, 2014. "On the optimal control of manufacturing and remanufacturing activities with a single shared server," European Journal of Operational Research, Elsevier, vol. 234(1), pages 86-98.
    62. Mitra, Subrata, 2009. "Analysis of a two-echelon inventory system with returns," Omega, Elsevier, vol. 37(1), pages 106-115, February.
    63. Kottala Sri Yogi, 2015. "Performance evaluation of reverse logistics: A case of LPG agency," Cogent Business & Management, Taylor & Francis Journals, vol. 2(1), pages 1063229-106, December.
    64. Nuramilawahida Mat Ropi & Hawa Hishamuddin & Dzuraidah Abd Wahab & Wakhid Ahmad Jauhari & Fatin Amrina A. Rashid & Nor Kamaliana Khamis & Intan Fadhlina Mohamed & Mohd Anas Mohd Sabri & Mohd Radzi Abu, 2023. "Optimal Lot-Sizing Decisions for a Remanufacturing Production System under Spare Parts Supply Disruption," Mathematics, MDPI, vol. 11(19), pages 1-19, September.
    65. Inderfurth, Karl, 2004. "Optimal policies in hybrid manufacturing/remanufacturing systems with product substitution," International Journal of Production Economics, Elsevier, vol. 90(3), pages 325-343, August.
    66. Tsiliyannis, Christos Aristeides, 2018. "Markov chain modeling and forecasting of product returns in remanufacturing based on stock mean-age," European Journal of Operational Research, Elsevier, vol. 271(2), pages 474-489.
    67. Fleischmann, Mortiz & Krikke, Hans Ronald & Dekker, Rommert & Flapper, Simme Douwe P., 2000. "A characterisation of logistics networks for product recovery," Omega, Elsevier, vol. 28(6), pages 653-666, December.
    68. De Giovanni, Pietro & Zaccour, Georges, 2014. "A two-period game of a closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 232(1), pages 22-40.
    69. M. Fonseca & Álvaro García-Sánchez & Miguel Ortega-Mier & Francisco Saldanha-da-Gama, 2010. "A stochastic bi-objective location model for strategic reverse logistics," TOP: An Official Journal of the Spanish Society of Statistics and Operations Research, Springer;Sociedad de Estadística e Investigación Operativa, vol. 18(1), pages 158-184, July.
    70. de Brito, M.P. & Dekker, R., 2001. "Modelling product returns in inventory control - exploring the validity or general assumptions," Econometric Institute Research Papers EI 2001-27, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    71. Shuihua Han & Weina Ma & Ling Zhao & Xuelian Zhang & Ming K. Lim & Shuangyuan Yang & Stephen Leung, 2016. "A robust optimisation model for hybrid remanufacturing and manufacturing systems under uncertain return quality and market demand," International Journal of Production Research, Taylor & Francis Journals, vol. 54(17), pages 5056-5072, September.
    72. Ramin Sahamie & Dennis Stindt & Christian Nuss, 2013. "Transdisciplinary Research in Sustainable Operations – An Application to Closed‐Loop Supply Chains," Business Strategy and the Environment, Wiley Blackwell, vol. 22(4), pages 245-268, May.
    73. Jena, Sarat Kumar & Sarmah, S.P., 2016. "Price and service co-opetiton under uncertain demand and condition of used items in a remanufacturing system," International Journal of Production Economics, Elsevier, vol. 173(C), pages 1-21.
    74. Kim, Eungab & Saghafian, Soroush & Van Oyen, Mark P., 2013. "Joint control of production, remanufacturing, and disposal activities in a hybrid manufacturing–remanufacturing system," European Journal of Operational Research, Elsevier, vol. 231(2), pages 337-348.
    75. de Brito, M.P. & Dekker, R. & Flapper, S.D.P., 2003. "Reverse Logistics - a review of case studies," ERIM Report Series Research in Management ERS-2003-012-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    76. Céline Michaud & Daniel Llerena, 2011. "Green consumer behaviour: an experimental analysis of willingness to pay for remanufactured products," Business Strategy and the Environment, Wiley Blackwell, vol. 20(6), pages 408-420, September.
    77. Vercraene, Samuel & Gayon, Jean-Philippe, 2013. "Optimal control of a production-inventory system with productreturns," International Journal of Production Economics, Elsevier, vol. 142(2), pages 302-310.
    78. Shouxu Song & Yongting Tian & Dan Zhou, 2021. "Reverse Logistics Network Design and Simulation for Automatic Teller Machines Based on Carbon Emission and Economic Benefits: A Study of the Anhui Province ATMs Industry," Sustainability, MDPI, vol. 13(20), pages 1-24, October.
    79. Mohammed Alkahtani & Aiman Ziout & Bashir Salah & Moath Alatefi & Abd Elatty E. Abd Elgawad & Ahmed Badwelan & Umar Syarif, 2021. "An Insight into Reverse Logistics with a Focus on Collection Systems," Sustainability, MDPI, vol. 13(2), pages 1-22, January.
    80. Carlsson, Dick & Rönnqvist, Mikael, 2006. "Backhauling in forest transportation - models, methods and practical usage," Discussion Papers 2006/5, Norwegian School of Economics, Department of Business and Management Science.
    81. Gregory A. DeCroix, 2006. "Optimal Policy for a Multiechelon Inventory System with Remanufacturing," Operations Research, INFORMS, vol. 54(3), pages 532-543, June.
    82. Sahar Porkar & Iraj Mahdavi & Behzad Maleki Vishkaei & Milad Hematian, 2020. "Green supply chain flow analysis with multi-attribute demand in a multi-period product development environment," Operational Research, Springer, vol. 20(3), pages 1405-1435, September.
    83. Kovačić, Danijel & Usenik, Janez & Bogataj, Marija, 2017. "Optimal decisions on investments in Urban Energy Cogeneration plants – Extended MRP and fuzzy approach to the stochastic systems," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 583-595.
    84. Flora Poppelaars & Conny Bakker & Jo van Engelen, 2020. "Design for Divestment in a Circular Economy: Stimulating Voluntary Return of Smartphones through Design," Sustainability, MDPI, vol. 12(4), pages 1-19, February.
    85. Martí, Joana M. Comas & Tancrez, Jean-Sébastien & Seifert, Ralf W., 2015. "Carbon footprint and responsiveness trade-offs in supply chain network design," International Journal of Production Economics, Elsevier, vol. 166(C), pages 129-142.
    86. Sunder Kekre & Uday S. Rao & Jayashankar M. Swaminathan & Jun Zhang, 2003. "Reconfiguring a Remanufacturing Line at Visteon, Mexico," Interfaces, INFORMS, vol. 33(6), pages 30-43, December.
    87. Ghosh, Debabrata & Gouda, Sirish & Shankar, Ravi & Swami, Sanjeev & Thomas, Vinu Cheruvil, 2018. "Strategic decision making under subscription-based contracts for remanufacturing," International Journal of Production Economics, Elsevier, vol. 200(C), pages 134-150.
    88. Lin, Yizhong & Leung, Janny M.Y. & Zhang, Lianmin & Gu, Jia-Wen, 2020. "Single-item repairable inventory system with stochastic new and warranty demands," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 142(C).
    89. Kenné, Jean-Pierre & Dejax, Pierre & Gharbi, Ali, 2012. "Production planning of a hybrid manufacturing–remanufacturing system under uncertainty within a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 135(1), pages 81-93.
    90. Ágota Bányai, 2011. "Optimisation Of Intermediate Storage Network Of Jit Purchasing," Advanced Logistic systems, University of Miskolc, Department of Material Handling and Logistics, vol. 5(1), pages 35-40, December.
    91. Amir Heiman & Joel Ferguson & David Zilberman, 2020. "Marketing and Technology Adoption and Diffusion," Applied Economic Perspectives and Policy, John Wiley & Sons, vol. 42(1), pages 21-30, March.
    92. Barbosa-Póvoa, Ana Paula & da Silva, Cátia & Carvalho, Ana, 2018. "Opportunities and challenges in sustainable supply chain: An operations research perspective," European Journal of Operational Research, Elsevier, vol. 268(2), pages 399-431.
    93. Tancrez, Jean-Sébastien & Lange, Jean-Charles & Semal, Pierre, 2012. "A location-inventory model for large three-level supply chains," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 48(2), pages 485-502.
    94. Xue, Dongmei & Teunter, Ruud H. & Zhu, Stuart X. & Zhou, Weihua, 2021. "Entering the high-end market by collecting and remanufacturing a competitor’s high-end cores," Omega, Elsevier, vol. 99(C).
    95. Chen, Jing, 2011. "The impact of sharing customer returns information in a supply chain with and without a buyback policy," European Journal of Operational Research, Elsevier, vol. 213(3), pages 478-488, September.
    96. Hsien-Jen Lin, 2015. "Two-echelon stochastic inventory system with returns and partial backlogging," International Journal of Systems Science, Taylor & Francis Journals, vol. 46(6), pages 966-975, April.
    97. M. Tadaros & A. Migdalas & B. Samuelsson & A. Segerstedt, 2022. "Location of facilities and network design for reverse logistics of lithium-ion batteries in Sweden," Operational Research, Springer, vol. 22(2), pages 895-915, April.
    98. Tang, Christopher S. & Deo, Sarang, 2008. "Rental price and rental duration under retail competition," European Journal of Operational Research, Elsevier, vol. 187(3), pages 806-828, June.
    99. Blandine LAPERCHE & Antje BURMEISTER & Céline MERLIN-BROGNIART & Fédoua KASMI, 2014. "Ecologie industrielle et développement territorial durable : le rôle des services [Industrial ecology and sustainable territorial development: The role of services]," Working Papers 284, Laboratoire de Recherche sur l'Industrie et l'Innovation. ULCO / Research Unit on Industry and Innovation.
    100. Imre Dobos & Barbara Gobsch & Nadezhda Pakhomova & Grigory Pishchulov & Knut Richter, 2013. "Design of contract parameters in a closed-loop supply chain," Central European Journal of Operations Research, Springer;Slovak Society for Operations Research;Hungarian Operational Research Society;Czech Society for Operations Research;Österr. Gesellschaft für Operations Research (ÖGOR);Slovenian Society Informatika - Section for Operational Research;Croatian Operational Research Society, vol. 21(4), pages 713-727, December.
    101. Xiting Gong & Xiuli Chao, 2013. "Technical Note---Optimal Control Policy for Capacitated Inventory Systems with Remanufacturing," Operations Research, INFORMS, vol. 61(3), pages 603-611, June.
    102. Schultmann, Frank & Zumkeller, Moritz & Rentz, Otto, 2006. "Modeling reverse logistic tasks within closed-loop supply chains: An example from the automotive industry," European Journal of Operational Research, Elsevier, vol. 171(3), pages 1033-1050, June.
    103. Silviya Blagoeva (ed.), 2017. "Modern Logistics – Business And Education," Conferences of the Industrial business and logistics department, Publishing house Science and Economics Varna, number 1.
    104. Wei, Cansheng & Li, Yongjian & Cai, Xiaoqiang, 2011. "Robust optimal policies of production and inventory with uncertain returns and demand," International Journal of Production Economics, Elsevier, vol. 134(2), pages 357-367, December.
    105. Fei Zhang & Zailin Guan & Li Zhang & Yanyan Cui & Pengxing Yi & Saif Ullah, 2019. "Inventory management for a remanufacture-to-order production with multi-components (parts)," Journal of Intelligent Manufacturing, Springer, vol. 30(1), pages 59-78, January.
    106. Taleizadeh, Ata Allah & Moshtagh, Mohammad Sadegh, 2019. "A consignment stock scheme for closed loop supply chain with imperfect manufacturing processes, lost sales, and quality dependent return: Multi Levels Structure," International Journal of Production Economics, Elsevier, vol. 217(C), pages 298-316.
    107. Inderfurth, K. & de Kok, A. G. & Flapper, S. D. P., 2001. "Product recovery in stochastic remanufacturing systems with multiple reuse options," European Journal of Operational Research, Elsevier, vol. 133(1), pages 130-152, August.
    108. Omar, Mohd & Yeo, Ivan, 2009. "A model for a production-repair system under a time-varying demand process," International Journal of Production Economics, Elsevier, vol. 119(1), pages 17-23, May.
    109. Repoussis, P.P. & Paraskevopoulos, D.C. & Zobolas, G. & Tarantilis, C.D. & Ioannou, G., 2009. "A web-based decision support system for waste lube oils collection and recycling," European Journal of Operational Research, Elsevier, vol. 195(3), pages 676-700, June.
    110. Mitra, Subrata, 2007. "Revenue management for remanufactured products," Omega, Elsevier, vol. 35(5), pages 553-562, October.
    111. Zheng, Yanyan & Zhao, Yingxue & Wang, Nengmin & Meng, Xiaoge & Yang, Honglin, 2022. "Financing decision for a remanufacturing supply chain with a capital constrained retailer: A study from the perspective of market uncertainty," International Journal of Production Economics, Elsevier, vol. 245(C).
    112. Jian Yang & Boaz Golany & Gang Yu, 2005. "A concave‐cost production planning problem with remanufacturing options," Naval Research Logistics (NRL), John Wiley & Sons, vol. 52(5), pages 443-458, August.
    113. Beste Desticioglu & Hatice Calipinar & Bahar Ozyoruk & Erdinc Koc, 2022. "Model for Reverse Logistic Problem of Recycling under Stochastic Demand," Sustainability, MDPI, vol. 14(8), pages 1-19, April.
    114. Brandenburg, Marcus & Govindan, Kannan & Sarkis, Joseph & Seuring, Stefan, 2014. "Quantitative models for sustainable supply chain management: Developments and directions," European Journal of Operational Research, Elsevier, vol. 233(2), pages 299-312.
    115. Frank Schultmann & Bernd Engels & Otto Rentz, 2003. "Closed-Loop Supply Chains for Spent Batteries," Interfaces, INFORMS, vol. 33(6), pages 57-71, December.
    116. Frota Neto, J. Quariguasi & Bloemhof-Ruwaard, J.M. & van Nunen, J.A.E.E. & van Heck, E., 2008. "Designing and evaluating sustainable logistics networks," International Journal of Production Economics, Elsevier, vol. 111(2), pages 195-208, February.
    117. van der Laan, Erwin & Salomon, Marc & Dekker, Rommert, 1999. "An investigation of lead-time effects in manufacturing/remanufacturing systems under simple PUSH and PULL control strategies," European Journal of Operational Research, Elsevier, vol. 115(1), pages 195-214, May.
    118. Roland Geyer & Luk N. Van Wassenhove & Atalay Atasu, 2007. "The Economics of Remanufacturing Under Limited Component Durability and Finite Product Life Cycles," Management Science, INFORMS, vol. 53(1), pages 88-100, January.
    119. Srivastava, Samir K., 2008. "Network design for reverse logistics," Omega, Elsevier, vol. 36(4), pages 535-548, August.
    120. Marta Starostka-Patyk, 2007. "End-Of-Use Products In Reverse Logistics," Advanced Logistic systems, University of Miskolc, Department of Material Handling and Logistics, vol. 1(1), pages 81-85, December.
    121. Pradip K. Bhaumik, 2015. "Supply Chain Network Design Based on Integration of Forward and Reverse Logistics," Global Business Review, International Management Institute, vol. 16(4), pages 680-699, August.
    122. Janusz Grabara & Iwona Grabara, 2008. "Reverse Logistics In Globalization Aspects," Annales Universitatis Apulensis Series Oeconomica, Faculty of Sciences, "1 Decembrie 1918" University, Alba Iulia, vol. 2(10), pages 1-33.
    123. de Brito, M.P. & Dekker, R., 2002. "Reverse logistics - a framework," Econometric Institute Research Papers EI 2002-38, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    124. Amy Z. Zeng, 2013. "Coordination mechanisms for a three‐stage reverse supply chain to increase profitable returns," Naval Research Logistics (NRL), John Wiley & Sons, vol. 60(1), pages 31-45, February.
    125. Shenle Pan & Chao Chen & Ray Y. Zhong, 2015. "A crowdsourcing solution to collect e-commerce reverse flows in metropolitan areas," Post-Print hal-01148227, HAL.
    126. Mikhail Y. Kovalyov & Mikhail N. Lukashevich & Erwin Pesch, 2023. "Cost minimizing planning of container inspection and repair in multiple facilities," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 45(1), pages 181-204, March.
    127. Deishin Lee, 2012. "Turning Waste into By-Product," Manufacturing & Service Operations Management, INFORMS, vol. 14(1), pages 115-127, January.
    128. Chandra Prakash Garg, 2020. "A robust hybrid decision model to evaluate critical factors of reverse logistics implementation using Grey-DEMATEL framework," OPSEARCH, Springer;Operational Research Society of India, vol. 57(3), pages 837-873, September.
    129. NNC Pushpamali & Duzgun Agdas & Timothy M. Rose, 2019. "A Review of Reverse Logistics: An Upstream Construction Supply Chain Perspective," Sustainability, MDPI, vol. 11(15), pages 1-14, August.
    130. Hasan, Syed Akif & Subhani, Muhammad Imtiaz & Osman, Ms. Amber, 2011. "Waste Management in the Various Municipalities of Various Socio-Economic Conditions (An Empirical Evidence from Pakistan)," MPRA Paper 34752, University Library of Munich, Germany.
    131. Long He & Ying Rong & Zuo‐Jun Max Shen, 2020. "Product Sourcing and Distribution Strategies under Supply Disruption and Recall Risks," Production and Operations Management, Production and Operations Management Society, vol. 29(1), pages 9-23, January.
    132. Jisoo Oh & Bongju Jeong, 2014. "Profit Analysis and Supply Chain Planning Model for Closed-Loop Supply Chain in Fashion Industry," Sustainability, MDPI, vol. 6(12), pages 1-30, December.
    133. Lee, Chang Hwan & Rhee, Byong-Duk, 2007. "Channel coordination using product returns for a supply chain with stochastic salvage capacity," European Journal of Operational Research, Elsevier, vol. 177(1), pages 214-238, February.
    134. Jaber, Mohamad Y. & El Saadany, Ahmed M.A., 2009. "The production, remanufacture and waste disposal model with lost sales," International Journal of Production Economics, Elsevier, vol. 120(1), pages 115-124, July.
    135. Eiji B. Hosoda & Masashi Yamamoto, 2021. "Transportation costs of vehicle recycling under Hotelling’s Duopoly competition," Economia e Politica Industriale: Journal of Industrial and Business Economics, Springer;Associazione Amici di Economia e Politica Industriale, vol. 48(1), pages 77-91, March.
    136. Laurens G. Debo & L. Beril Toktay & Luk N. Van Wassenhove, 2005. "Market Segmentation and Product Technology Selection for Remanufacturable Products," Management Science, INFORMS, vol. 51(8), pages 1193-1205, August.
    137. Choi, Dae-Won & Hwang, Hark & Koh, Shie-Gheun, 2007. "A generalized ordering and recovery policy for reusable items," European Journal of Operational Research, Elsevier, vol. 182(2), pages 764-774, October.
    138. R. Canan Savaskan & Shantanu Bhattacharya & Luk N. Van Wassenhove, 2004. "Closed-Loop Supply Chain Models with Product Remanufacturing," Management Science, INFORMS, vol. 50(2), pages 239-252, February.
    139. Sabharwal, Srishti & Garg, Suresh, 2013. "Determining cost effectiveness index of remanufacturing: A graph theoretic approach," International Journal of Production Economics, Elsevier, vol. 144(2), pages 521-532.
    140. Dobos, Imre & Richter, Knut, 2004. "An extended production/recycling model with stationary demand and return rates," International Journal of Production Economics, Elsevier, vol. 90(3), pages 311-323, August.
    141. Pietro Giovanni & Georges Zaccour, 2019. "A selective survey of game-theoretic models of closed-loop supply chains," 4OR, Springer, vol. 17(1), pages 1-44, March.
    142. van der Laan, E.A. & Kiesmueller, G.P., 2001. "An Inventory Model with Dependent Product Demands and Returns," ERIM Report Series Research in Management ERS-2001-16-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    143. Ma, N., 2014. "Optimal scope of supply chain network & operations design," Other publications TiSEM e6187708-b664-44bf-aef8-f, Tilburg University, School of Economics and Management.
    144. Georgiadis, Patroklos & Vlachos, Dimitrios, 2004. "The effect of environmental parameters on product recovery," European Journal of Operational Research, Elsevier, vol. 157(2), pages 449-464, September.
    145. Jaber, Mohamad Y. & El Saadany, Ahmed M.A., 2011. "An economic production and remanufacturing model with learning effects," International Journal of Production Economics, Elsevier, vol. 131(1), pages 115-127, May.
    146. Georgiadis, Patroklos & Athanasiou, Efstratios, 2010. "The impact of two-product joint lifecycles on capacity planning of remanufacturing networks," European Journal of Operational Research, Elsevier, vol. 202(2), pages 420-433, April.
    147. Sambracos, Evangelos & Ramfou, Irene, 2010. "Assessing the role of goods transport in organizational performance," MPRA Paper 52204, University Library of Munich, Germany.
    148. Gökbayrak, Esra & Kayış, Enis, 2023. "Single item periodic review inventory control with sales dependent stochastic return flows," International Journal of Production Economics, Elsevier, vol. 255(C).
    149. Majdi Argoubi & Haifa Jammeli & Hatem Masri, 2020. "The intellectual structure of the waste management field," Annals of Operations Research, Springer, vol. 294(1), pages 655-676, November.
    150. S. Maryam Masoumi & Nima Kazemi & Salwa Hanim Abdul-Rashid, 2019. "Sustainable Supply Chain Management in the Automotive Industry: A Process-Oriented Review," Sustainability, MDPI, vol. 11(14), pages 1-30, July.
    151. Shi, Jianmai & Zhang, Guoqing & Sha, Jichang, 2011. "Optimal production and pricing policy for a closed loop system," Resources, Conservation & Recycling, Elsevier, vol. 55(6), pages 639-647.
    152. Sebnem Ahiska, S. & King, Russell E., 2010. "Inventory optimization in a one product recoverable manufacturing system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 11-19, March.
    153. Denilson Ricardo de Lucena Nunes & Danyelle de Sousa Nascimento & Jennifer Rodrigues Matos & André Cristiano Silva Melo & Vitor William Batista Martins & Antônio Erlindo Braga, 2023. "Approaches to Performance Assessment in Reverse Supply Chains: A Systematic Literature Review," Logistics, MDPI, vol. 7(3), pages 1-15, June.
    154. de Koster, M.B.M. & de Brito, M.P. & van de Vendel, M.A., 2002. "How to organise return handling; an exploratory study with nine retailer warehouses," Econometric Institute Research Papers EI 2002-11, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    155. Kokkinaki, A.I. & Dekker, R. & Lee, R. & Pappis, C.P., 2001. "Integrating a web-based system with business processes in closed loop supply chains," Econometric Institute Research Papers EI 2001-31, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    156. Jaber, Mohamad Y. & Rosen, Marc A., 2008. "The economic order quantity repair and waste disposal model with entropy cost," European Journal of Operational Research, Elsevier, vol. 188(1), pages 109-120, July.
    157. Mustapha Hrouga & Stephnaie Michel, 2023. "Towards a new supply chain manager dashboard under circular economy constraints: A case study on France textile and clothing industry," Business Strategy and the Environment, Wiley Blackwell, vol. 32(8), pages 6074-6093, December.
    158. Alvarez-Gil, M Jose & Berrone, Pascual & Husillos, F. Javier & Lado, Nora, 2007. "Reverse logistics, stakeholders' influence, organizational slack, and managers' posture," Journal of Business Research, Elsevier, vol. 60(5), pages 463-473, May.
    159. Agrawal, Saurabh & Singh, Rajesh K. & Murtaza, Qasim, 2016. "Outsourcing decisions in reverse logistics: Sustainable balanced scorecard and graph theoretic approach," Resources, Conservation & Recycling, Elsevier, vol. 108(C), pages 41-53.
    160. Kumar Jena, Sarat & Sarmah, S.P, 2014. "Price competition and co-operation in a duopoly closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 156(C), pages 346-360.
    161. Jans, R.F. & Degraeve, Z., 2005. "Modeling Industrial Lot Sizing Problems: A Review," ERIM Report Series Research in Management ERS-2005-049-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    162. Yu-Chung Tsao & Vu-Thuy Linh & Jye-Chyi Lu & Vincent Yu, 2018. "A supply chain network with product remanufacturing and carbon emission considerations: a two-phase design," Journal of Intelligent Manufacturing, Springer, vol. 29(3), pages 693-705, March.
    163. Walther, Grit & Schmid, Eberhard & Spengler, Thomas S., 2008. "Negotiation-based coordination in product recovery networks," International Journal of Production Economics, Elsevier, vol. 111(2), pages 334-350, February.
    164. Faustino Alarcón & Pascual Cortés-Pellicer & David Pérez-Perales & Raquel Sanchis, 2020. "Sustainability vs. Circular Economy from a Disposition Decision Perspective: A Proposal of a Methodology and an Applied Example in SMEs," Sustainability, MDPI, vol. 12(23), pages 1-26, December.
    165. Minner, Stefan, 2001. "Strategic safety stocks in reverse logistics supply chains," International Journal of Production Economics, Elsevier, vol. 71(1-3), pages 417-428, May.
    166. Shad Dowlatshahi, 2000. "Developing a Theory of Reverse Logistics," Interfaces, INFORMS, vol. 30(3), pages 143-155, June.
    167. Ashayeri, Jalal & Ma, Ning & Sotirov, Renata, 2015. "The redesign of a warranty distribution network with recovery processes," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 77(C), pages 184-197.
    168. Chang Fang & Xinbao Liu & Panos M. Pardalos & Jianyu Long & Jun Pei & Chao Zuo, 2017. "A stochastic production planning problem in hybrid manufacturing and remanufacturing systems with resource capacity planning," Journal of Global Optimization, Springer, vol. 68(4), pages 851-878, August.
    169. Raul Oltra-Badenes & Hermenegildo Gil-Gomez & Vicente Guerola-Navarro & Pau Vicedo, 2019. "Is It Possible to Manage the Product Recovery Processes in an ERP? Analysis of Functional Needs," Sustainability, MDPI, vol. 11(16), pages 1-16, August.
    170. Renzheng Xue & Fengbin Zhang & Feng Tian, 2018. "A System Dynamics Model to Evaluate Effects of Retailer-Led Recycling Based on Dual Chains Competition: A Case of e-Waste in China," Sustainability, MDPI, vol. 10(10), pages 1-18, September.
    171. Konstantaras, I. & Papachristos, S., 2007. "Optimal policy and holding cost stability regions in a periodic review inventory system with manufacturing and remanufacturing options," European Journal of Operational Research, Elsevier, vol. 178(2), pages 433-448, April.
    172. Ruiz-Benitez, Rocio & Muriel, Ana, 2014. "Consumer returns in a decentralized supply chain," International Journal of Production Economics, Elsevier, vol. 147(PC), pages 573-592.
    173. Hao Yu & Wei Deng Solvang, 2016. "A Stochastic Programming Approach with Improved Multi-Criteria Scenario-Based Solution Method for Sustainable Reverse Logistics Design of Waste Electrical and Electronic Equipment (WEEE)," Sustainability, MDPI, vol. 8(12), pages 1-28, December.
    174. Rosič, Heidrun & Jammernegg, Werner, 2013. "The economic and environmental performance of dual sourcing: A newsvendor approach," International Journal of Production Economics, Elsevier, vol. 143(1), pages 109-119.
    175. Kokkinaki, A.I. & Dekker, R. & de Koster, M.B.M. & Pappis, C.P., 2001. "From e-trash to e-treasure: how value can be created by the new e-business models for reverse logistics," Econometric Institute Research Papers EI 2000-32/A, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    176. H K Smith & G Laporte & P R Harper, 2009. "Locational analysis: highlights of growth to maturity," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 60(1), pages 140-148, May.
    177. Alexander Hübner & Andreas Holzapfel & Heinrich Kuhn, 2016. "Distribution systems in omni-channel retailing," Business Research, Springer;German Academic Association for Business Research, vol. 9(2), pages 255-296, August.
    178. Adel A. Alamri, 2023. "A Sustainable Closed-Loop Supply Chains Inventory Model Considering Optimal Number of Remanufacturing Times," Sustainability, MDPI, vol. 15(12), pages 1-23, June.
    179. Halit Üster & Gopalakrishnan Easwaran & Elif Akçali & Sila Çetinkaya, 2007. "Benders decomposition with alternative multiple cuts for a multi‐product closed‐loop supply chain network design model," Naval Research Logistics (NRL), John Wiley & Sons, vol. 54(8), pages 890-907, December.
    180. Lundin, Johan F., 2012. "Redesigning a closed-loop supply chain exposed to risks," International Journal of Production Economics, Elsevier, vol. 140(2), pages 596-603.
    181. Kiesmuller, G. P., 2003. "Optimal control of a one product recovery system with leadtimes," International Journal of Production Economics, Elsevier, vol. 81(1), pages 333-340, January.
    182. Le Blanc, H.M. & Fleuren, H.A. & Krikke, H.R., 2002. "Network Designs for LPG Tanks in the Netherlands," Discussion Paper 2002-1, Tilburg University, Center Applied Research.
    183. Mostard, J. & Teunter, R.H. & de Koster, M.B.M., 2003. "The distribution-free newsboy problem with resalable returns," ERIM Report Series Research in Management ERS-2003-068-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    184. Costa, Alysson M. & França, Paulo M. & Lyra Filho, Christiano, 2011. "Two-level network design with intermediate facilities: An application to electrical distribution systems," Omega, Elsevier, vol. 39(1), pages 3-13, January.
    185. Kangzhou Wang & Yingxue Zhao & Yonghong Cheng & Tsan-Ming Choi, 2014. "Cooperation or Competition? Channel Choice for a Remanufacturing Fashion Supply Chain with Government Subsidy," Sustainability, MDPI, vol. 6(10), pages 1-19, October.
    186. Deepak Lamba & Devendra K. Yadav & Akhilesh Barve & Ganapati Panda, 2020. "Prioritizing barriers in reverse logistics of E-commerce supply chain using fuzzy-analytic hierarchy process," Electronic Commerce Research, Springer, vol. 20(2), pages 381-403, June.
    187. Sumit Maheshwari & Amrina Kausar & Ahmad Hasan & Chandra K. Jaggi, 2023. "Sustainable inventory model for a three-layer supply chain using optimal waste management," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 14(1), pages 216-235, March.
    188. Pishvaee, M.S. & Razmi, J. & Torabi, S.A., 2014. "An accelerated Benders decomposition algorithm for sustainable supply chain network design under uncertainty: A case study of medical needle and syringe supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 67(C), pages 14-38.
    189. Bishal Baniya, 2023. "Circularity in Facility Management: Conceptualisation and Potential Areas for Circularity-Oriented Actions," Sustainability, MDPI, vol. 15(11), pages 1-27, May.
    190. Tahirov, Nail & Hasanov, Parviz & Jaber, Mohamad Y., 2016. "Optimization of closed-loop supply chain of multi-items with returned subassemblies," International Journal of Production Economics, Elsevier, vol. 174(C), pages 1-10.
    191. Feng, Yan & Viswanathan, S., 2014. "Heuristics with guaranteed performance bounds for a manufacturing system with product recovery," European Journal of Operational Research, Elsevier, vol. 232(2), pages 322-329.
    192. Sgarbossa, Fabio & Russo, Ivan, 2017. "A proactive model in sustainable food supply chain: Insight from a case study," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 596-606.
    193. Charles J. Corbett & Gregory A. DeCroix, 2001. "Shared-Savings Contracts for Indirect Materials in Supply Chains: Channel Profits and Environmental Impacts," Management Science, INFORMS, vol. 47(7), pages 881-893, July.
    194. Dissanayake, Geetha & Sinha, Pammi, 2015. "An examination of the product development process for fashion remanufacturing," Resources, Conservation & Recycling, Elsevier, vol. 104(PA), pages 94-102.
    195. Melo, M.T. & Nickel, S. & Saldanha-da-Gama, F., 2009. "Facility location and supply chain management - A review," European Journal of Operational Research, Elsevier, vol. 196(2), pages 401-412, July.
    196. Minner, Stefan, 2003. "Multiple-supplier inventory models in supply chain management: A review," International Journal of Production Economics, Elsevier, vol. 81(1), pages 265-279, January.
    197. Vlachos, D. & Dekker, R., 2000. "Return handling options and order quantities for single period products," Econometric Institute Research Papers EI 2000-29/A, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    198. Soto Zuluaga, Juan Pablo & Thiell, Marcus & Colomé Perales, Rosa, 2017. "Reverse cross-docking," Omega, Elsevier, vol. 66(PA), pages 48-57.
    199. Muneeb, Syed Mohd & Asim, Zainab & Hajiaghaei-Keshteli, Mostafa & Abbas, Haidar, 2023. "A multi-objective integrated supplier selection-production-distribution model for re-furbished products: Towards a circular economy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 175(C).
    200. Pietro Giovanni & Talat S. Genc, 2020. "Coordination in Closed-Loop Supply Chain with Price-Dependent Returns," International Series in Operations Research & Management Science, in: Pierre-Olivier Pineau & Simon Sigué & Sihem Taboubi (ed.), Games in Management Science, pages 87-113, Springer.
    201. Abdelghani Bekrar & Abdessamad Ait El Cadi & Raca Todosijevic & Joseph Sarkis, 2021. "Digitalizing the Closing-of-the-Loop for Supply Chains: A Transportation and Blockchain Perspective," Sustainability, MDPI, vol. 13(5), pages 1-25, March.
    202. Andre P. Calmon & Stephen C. Graves, 2017. "Inventory Management in a Consumer Electronics Closed-Loop Supply Chain," Manufacturing & Service Operations Management, INFORMS, vol. 19(4), pages 568-585, October.
    203. Mihi Ramírez, Antonio, 2012. "Product return and logistics knowledge: Influence on performance of the firm," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 48(6), pages 1137-1151.
    204. Ahiska, S. Sebnem & King, Russell E., 2010. "Life cycle inventory policy characterizations for a single-product recoverable system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 51-61, March.
    205. Liao, Haolan & Zhang, Qingyu & Li, Lu, 2023. "Optimal procurement strategy for multi-echelon remanufacturing systems under quality uncertainty," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 170(C).
    206. Teunter, R.H. & Bayindir, Z.P. & van den Heuvel, W., 2005. "Dynamic lot sizing with product returns," Econometric Institute Research Papers EI 2005-17, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    207. Xiaomin Zhao & Xueli Bai & Zhihui Fan & Ting Liu, 2020. "Game Analysis and Coordination of a Closed-Loop Supply Chain: Perspective of Components Reuse Strategy," Sustainability, MDPI, vol. 12(22), pages 1-19, November.
    208. Mostard, Julien & de Koster, Rene & Teunter, Ruud, 2005. "The distribution-free newsboy problem with resalable returns," International Journal of Production Economics, Elsevier, vol. 97(3), pages 329-342, September.
    209. Achillas, Ch. & Aidonis, D. & Vlachokostas, Ch. & Moussiopoulos, N. & Banias, G. & Triantafillou, D., 2012. "A multi-objective decision-making model to select waste electrical and electronic equipment transportation media," Resources, Conservation & Recycling, Elsevier, vol. 66(C), pages 76-84.
    210. Canan Savaskan, 2001. "Channel Choice and Coordination in a Remanufacturing Environment," Discussion Papers 1328, Northwestern University, Center for Mathematical Studies in Economics and Management Science.
    211. Ondemir, Onder & Gupta, Surendra M., 2014. "A multi-criteria decision making model for advanced repair-to-order and disassembly-to-order system," European Journal of Operational Research, Elsevier, vol. 233(2), pages 408-419.
    212. Helena Ramalhinho-Lourenço, 2001. "Supply chain management: An opportunity for metaheuristics," Economics Working Papers 538, Department of Economics and Business, Universitat Pompeu Fabra.
    213. A.J.D. Lambert & H.M. Boelaarts & M.A.M. Splinter, 2004. "Optimal Recycling System Design: With an Application to Sophisticated Packaging Tools," Environmental & Resource Economics, Springer;European Association of Environmental and Resource Economists, vol. 28(3), pages 273-299, July.
    214. Kaya, Onur, 2010. "Incentive and production decisions for remanufacturing operations," European Journal of Operational Research, Elsevier, vol. 201(2), pages 442-453, March.
    215. Sohn, So Young & Han, Hong Kyu & Jeon, Hye Jin, 2007. "Development of an Air Force Warehouse Logistics Index to continuously improve logistics capabilities," European Journal of Operational Research, Elsevier, vol. 183(1), pages 148-161, November.
    216. Marcus Brandenburg & Tobias Rebs, 2015. "Sustainable supply chain management: a modeling perspective," Annals of Operations Research, Springer, vol. 229(1), pages 213-252, June.
    217. John Khawam & Warren H. Hausman & Dinah W. Cheng, 2007. "Warranty Inventory Optimization for Hitachi Global Storage Technologies, Inc," Interfaces, INFORMS, vol. 37(5), pages 455-471, October.
    218. Jie Xu & Nan Liu, 2017. "Research on closed loop supply chain with reference price effect," Journal of Intelligent Manufacturing, Springer, vol. 28(1), pages 51-64, January.
    219. L K Chu & Y Shi & S Lin & D Sculli & J Ni, 2010. "Fuzzy chance-constrained programming model for a multi-echelon reverse logistics network for household appliances," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 61(4), pages 551-560, April.
    220. Yalabik, Baris & Chhajed, Dilip & Petruzzi, Nicholas C., 2014. "Product and sales contract design in remanufacturing," International Journal of Production Economics, Elsevier, vol. 154(C), pages 299-312.
    221. Mota, Bruna & Gomes, Maria Isabel & Carvalho, Ana & Barbosa-Povoa, Ana Paula, 2018. "Sustainable supply chains: An integrated modeling approach under uncertainty," Omega, Elsevier, vol. 77(C), pages 32-57.
    222. Banasik, Aleksander & Kanellopoulos, Argyris & Claassen, G.D.H. & Bloemhof-Ruwaard, Jacqueline M. & van der Vorst, Jack G.A.J., 2017. "Closing loops in agricultural supply chains using multi-objective optimization: A case study of an industrial mushroom supply chain," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 409-420.
    223. Sean X. Zhou & Zhijie Tao & Xiuli Chao, 2011. "Optimal Control of Inventory Systems with Multiple Types of Remanufacturable Products," Manufacturing & Service Operations Management, INFORMS, vol. 13(1), pages 20-34, March.
    224. Ahi, Payman & Searcy, Cory & Jaber, Mohamad Y., 2018. "A Quantitative Approach for Assessing Sustainability Performance of Corporations," Ecological Economics, Elsevier, vol. 152(C), pages 336-346.
    225. Fleischmann, Moritz & Kuik, Roelof & Dekker, Rommert, 2002. "Controlling inventories with stochastic item returns: A basic model," European Journal of Operational Research, Elsevier, vol. 138(1), pages 63-75, April.
    226. Mallidis, Ioannis & Dekker, Rommert & Vlachos, Dimitrios, 2012. "The impact of greening on supply chain design and cost: a case for a developing region," Journal of Transport Geography, Elsevier, vol. 22(C), pages 118-128.
    227. Geraldo Ferrer & Jayashankar M. Swaminathan, 2006. "Managing New and Remanufactured Products," Management Science, INFORMS, vol. 52(1), pages 15-26, January.
    228. Ching-Chin Chern & Hsin-Mei Wang & Kwei-Long Huang, 2017. "A heuristic master planning algorithm for recycling supply chain management," Journal of Intelligent Manufacturing, Springer, vol. 28(4), pages 985-1003, April.
    229. Chang Fang & Xinbao Liu & Jun Pei & Wenjuan Fan & Panos M. Pardalos, 2016. "Optimal production planning in a hybrid manufacturing and recovering system based on the internet of things with closed loop supply chains," Operational Research, Springer, vol. 16(3), pages 543-577, October.
    230. Eleonora Bottani & Maria Carmen Gentilotti & Marta Rinaldi, 2017. "A Fuzzy Logic-Based Tool for the Assessment of Corporate Sustainability: A Case Study in the Food Machinery Industry," Sustainability, MDPI, vol. 9(4), pages 1-29, April.
    231. Inderfurth, Karl & van der Laan, Erwin, 2001. "Leadtime effects and policy improvement for stochastic inventory control with remanufacturing," International Journal of Production Economics, Elsevier, vol. 71(1-3), pages 381-390, May.
    232. Krikke, Harold & Hofenk, Dianne & Wang, Yacan, 2013. "Revealing an invisible giant: A comprehensive survey into return practices within original (closed-loop) supply chains," Resources, Conservation & Recycling, Elsevier, vol. 73(C), pages 239-250.
    233. Konstantaras, Ioannis & Skouri, Konstantina & Benkherouf, Lakdere, 2021. "Optimizing inventory decisions for a closed–loop supply chain model under a carbon tax regulatory mechanism," International Journal of Production Economics, Elsevier, vol. 239(C).
    234. González-Torre, Pilar L. & Adenso-Díaz, Belarmino, 2006. "Reverse logistics practices in the glass sector in Spain and Belgium," International Business Review, Elsevier, vol. 15(5), pages 527-546, October.
    235. Xiaodong Zhu & Lingfei Yu & Ji Zhang & Chenliang Li & Yizhao Zhao, 2018. "Warranty Decision Model and Remanufacturing Coordination Mechanism in Closed-Loop Supply Chain: View from a Consumer Behavior Perspective," Sustainability, MDPI, vol. 10(12), pages 1-21, December.
    236. Jörn‐Henrik Thun & Andrea Müller, 2010. "An empirical analysis of green supply chain management in the German automotive industry," Business Strategy and the Environment, Wiley Blackwell, vol. 19(2), pages 119-132, February.
    237. Vidovic, Milorad & Dimitrijevic, Branka & Ratkovic, Branislava & Simic, Vladimir, 2011. "A novel covering approach to positioning ELV collection points," Resources, Conservation & Recycling, Elsevier, vol. 57(C), pages 1-9.
    238. Takahashi, Katsuhiko & Morikawa, Katsumi & Myreshka & Takeda, Daisuke & Mizuno, Akihiko, 2007. "Inventory control for a MARKOVIAN remanufacturing system with stochastic decomposition process," International Journal of Production Economics, Elsevier, vol. 108(1-2), pages 416-425, July.
    239. Dijkstra, Arjan S. & Van der Heide, Gerlach & Roodbergen, Kees Jan, 2019. "Transshipments of cross-channel returned products," International Journal of Production Economics, Elsevier, vol. 209(C), pages 70-77.
    240. Komoto, H. & Tomiyama, T. & Silvester, S. & Brezet, H., 2011. "Analyzing supply chain robustness for OEMs from a life cycle perspective using life cycle simulation," International Journal of Production Economics, Elsevier, vol. 134(2), pages 447-457, December.
    241. Volker Trauzettel, 2015. "A Case Study On Optimizing Parts Supply In Manufacturing By Reusable Containers," Business Logistics in Modern Management, Josip Juraj Strossmayer University of Osijek, Faculty of Economics, Croatia, vol. 15, pages 161-174.
    242. Felix T.S. Chan & Nan Li & S.H. Chung & Mozafar Saadat, 2017. "Management of sustainable manufacturing systems-a review on mathematical problems," International Journal of Production Research, Taylor & Francis Journals, vol. 55(4), pages 1210-1225, February.
    243. Yang, Y. & Lin, J. & Hedenstierna, C.P.T. & Zhou, L., 2023. "The more the better? The impact of the number and location of product recovery options on the system dynamics in a closed-loop supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 175(C).
    244. Gharbi, A. & Pellerin, R. & Sadr, J., 2008. "Production rate control for stochastic remanufacturing systems," International Journal of Production Economics, Elsevier, vol. 112(1), pages 37-47, March.
    245. Badri, Hossein & Fatemi Ghomi, S.M.T. & Hejazi, Taha-Hossein, 2017. "A two-stage stochastic programming approach for value-based closed-loop supply chain network design," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 105(C), pages 1-17.
    246. Toso, Eli Angela V. & Alem, Douglas, 2014. "Effective location models for sorting recyclables in public management," European Journal of Operational Research, Elsevier, vol. 234(3), pages 839-860.
    247. Sanjeev Swami, 2006. "—Research Perspectives at the Interface of Marketing and Operations: Applications to the Motion Picture Industry," Marketing Science, INFORMS, vol. 25(6), pages 670-673, 11-12.
    248. Florian Lüdeke‐Freund & Stefan Gold & Nancy M. P. Bocken, 2019. "A Review and Typology of Circular Economy Business Model Patterns," Journal of Industrial Ecology, Yale University, vol. 23(1), pages 36-61, February.
    249. Gregory A. DeCroix & Paul H. Zipkin, 2005. "Inventory Management for an Assembly System with Product or Component Returns," Management Science, INFORMS, vol. 51(8), pages 1250-1265, August.
    250. Animesh Ghosh & Prabha Bhola & Uthayasankar Sivarajah, 2022. "Emerging Associates of the Circular Economy: Analysing Interactions and Trends by a Mixed Methods Systematic Review," Sustainability, MDPI, vol. 14(16), pages 1-41, August.
    251. de Brito, M.P. & Dekker, R., 2003. "A Framework for Reverse Logistics," ERIM Report Series Research in Management ERS-2003-045-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    252. Boysen, Nils & Fliedner, Malte & Scholl, Armin, 2007. "A classification of assembly line balancing problems," European Journal of Operational Research, Elsevier, vol. 183(2), pages 674-693, December.
    253. Gonzalez-Torre, Pilar L. & Adenso-Diaz, B. & Artiba, Hakim, 2004. "Environmental and reverse logistics policies in European bottling and packaging firms," International Journal of Production Economics, Elsevier, vol. 88(1), pages 95-104, March.
    254. Dinler, Esra & Güngör, Zülal, 2017. "Planning decisions for recycling products containing hazardous and explosive substances: A fuzzy multi-objective model," Resources, Conservation & Recycling, Elsevier, vol. 117(PB), pages 93-101.
    255. Kogan, Konstantin, 2011. "Second-Hand Markets and Intrasupply Chain Competition," Journal of Retailing, Elsevier, vol. 87(4), pages 489-501.
    256. El Saadany, Ahmed M.A. & Jaber, Mohamad Y., 2011. "A production/remanufacture model with returns' subassemblies managed differently," International Journal of Production Economics, Elsevier, vol. 133(1), pages 119-126, September.
    257. Demeter, Krisztina & Szász, Levente & Kő, Andrea, 2019. "A text mining based overview of inventory research in the ISIR special issues 1994–2016," International Journal of Production Economics, Elsevier, vol. 209(C), pages 134-146.
    258. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    259. Ming Liu & Rongfan Liu & Zhanguo Zhu & Chengbin Chu & Xiaoyi Man, 2018. "A Bi-Objective Green Closed Loop Supply Chain Design Problem with Uncertain Demand," Sustainability, MDPI, vol. 10(4), pages 1-22, March.
    260. Ozden Tozanli & Gazi Murat Duman & Elif Kongar & Surendra M. Gupta, 2017. "Environmentally Concerned Logistics Operations in Fuzzy Environment: A Literature Survey," Logistics, MDPI, vol. 1(1), pages 1-42, June.
    261. Zhiguo Wang & Lufei Huang & Cici Xiao He, 0. "A multi-objective and multi-period optimization model for urban healthcare waste’s reverse logistics network design," Journal of Combinatorial Optimization, Springer, vol. 0, pages 1-28.
    262. Zerhouni, Hichem & Gayon, Jean-Philippe & Frein, Yannick, 2013. "Influence of dependency between demands and returns in a reverse logistics system," International Journal of Production Economics, Elsevier, vol. 143(1), pages 62-71.
    263. Barker, Theresa J. & Zabinsky, Zelda B., 2011. "A multicriteria decision making model for reverse logistics using analytical hierarchy process," Omega, Elsevier, vol. 39(5), pages 558-573, October.
    264. Derek Voigt & Nelson Casarotto Filho & Mayara Atherino Macedo & Thais Guerra Braga & Rodrigo Ulisses Garbin da Rocha, 2019. "Performance Evaluation of Reverse Logistics: Opportunities for Future Research," Sustainability, MDPI, vol. 11(19), pages 1-17, September.
    265. Jun-Der Leu & Larry Jung-Hsing Lee & Yi-Wei Huang & Chia-Chi Huang, 2021. "Sustainable Supply Chains: Evidence from Small and Medium-Sized Manufacturers," Sustainability, MDPI, vol. 13(16), pages 1-22, August.
    266. Chen, Chialin & Zhu, Joe & Yu, Jiun-Yu & Noori, Hamid, 2012. "A new methodology for evaluating sustainable product design performance with two-stage network data envelopment analysis," European Journal of Operational Research, Elsevier, vol. 221(2), pages 348-359.
    267. Yan, Wei & Xiong, Yu & Xiong, Zhongkai & Guo, Nian, 2015. "Bricks vs. clicks: Which is better for marketing remanufactured products?," European Journal of Operational Research, Elsevier, vol. 242(2), pages 434-444.
    268. Ayşe Nur Adıgüzel Tüylü & Ergün Eroğlu, 2019. "Using Machine Learning Algorithms For Forecasting Rate of Return Product In Reverse Logistics Process," Alphanumeric Journal, Bahadir Fatih Yildirim, vol. 7(1), pages 143-156, June.
    269. Pietro De Giovanni & Georges Zaccour, 2022. "A selective survey of game-theoretic models of closed-loop supply chains," Annals of Operations Research, Springer, vol. 314(1), pages 77-116, July.
    270. Ketter, W., 2014. "Envisioning and Enabling Sustainable Smart Markets," ERIM Inaugural Address Series Research in Management EIA-2014-057-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam..
    271. S Raut & J N D Gupta & S Swami, 2008. "Single machine scheduling with time deteriorating job values," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 59(1), pages 105-118, January.
    272. Prahinski, Carol & Kocabasoglu, Canan, 2006. "Empirical research opportunities in reverse supply chains," Omega, Elsevier, vol. 34(6), pages 519-532, December.
    273. Kokkinaki, A.I. & Dekker, R. & van Nunen, J.A.E.E. & Pappis, C.P., 1999. "An explanatory study on electronic commerce for reverse logistics," Econometric Institute Research Papers EI 9951-/A, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    274. Cory Searcy, 2016. "Measuring Enterprise Sustainability," Business Strategy and the Environment, Wiley Blackwell, vol. 25(2), pages 120-133, February.
    275. Alessio Ishizaka & Sharfuddin Ahmed Khan & Siamak Kheybari & Syed Imran Zaman, 2023. "Supplier selection in closed loop pharma supply chain: a novel BWM–GAIA framework," Annals of Operations Research, Springer, vol. 324(1), pages 13-36, May.
    276. Álvarez, María José & Berrone, Pascual Alberto & Husillos, F. Javier & Lado, Nora, 2005. "The explanatory power of trust and commitment and stakeholders' salience : their influence on the reverse logistics programs performance," DEE - Working Papers. Business Economics. WB wb050303, Universidad Carlos III de Madrid. Departamento de Economía de la Empresa.
    277. Voutsinas, Theodore G. & Pappis, Costas P., 2002. "Scheduling jobs with values exponentially deteriorating over time," International Journal of Production Economics, Elsevier, vol. 79(3), pages 163-169, October.
    278. Bulmus, Serra Caner & Zhu, Stuart X. & Teunter, Ruud, 2014. "Competition for cores in remanufacturing," European Journal of Operational Research, Elsevier, vol. 233(1), pages 105-113.
    279. Teunter, Ruud & van der Laan, Erwin, 2002. "On the non-optimality of the average cost approach for inventory models with remanufacturing," International Journal of Production Economics, Elsevier, vol. 79(1), pages 67-73, September.
    280. Michael Krapp & Johannes B. Kraus, 2019. "Coordination contracts for reverse supply chains: a state-of-the-art review," Journal of Business Economics, Springer, vol. 89(7), pages 747-792, September.
    281. V. Daniel R. Guide & Vaidyanathan Jayaraman & Rajesh Srivastava & W. C. Benton, 2000. "Supply-Chain Management for Recoverable Manufacturing Systems," Interfaces, INFORMS, vol. 30(3), pages 125-142, June.
    282. Wei Yan & Hengyu Li & Junwu Chai & Zhifeng Qian & Hong Chen, 2018. "Owning or Outsourcing? Strategic Choice on Take-Back Operations for Third-Party Remanufacturing," Sustainability, MDPI, vol. 10(1), pages 1-18, January.
    283. Sergio Rubio & Beatriz Jiménez-Parra & Antonio Chamorro-Mera & Francisco J. Miranda, 2019. "Reverse Logistics and Urban Logistics: Making a Link," Sustainability, MDPI, vol. 11(20), pages 1-17, October.
    284. Pellerin, Robert & Sadr, Javad & Gharbi, Ali & Malhamé, Roland, 2009. "A production rate control policy for stochastic repair and remanufacturing systems," International Journal of Production Economics, Elsevier, vol. 121(1), pages 39-48, September.
    285. Atalay Atasu & Charles J. Corbett & Ximin (Natalie) Huang & L. Beril Toktay, 2020. "Sustainable Operations Management Through the Perspective of Manufacturing & Service Operations Management," Manufacturing & Service Operations Management, INFORMS, vol. 22(1), pages 146-157, January.
    286. Gamberini, Rita & Gebennini, Elisa & Manzini, Riccardo & Ziveri, Andrea, 2010. "On the integration of planning and environmental impact assessment for a WEEE transportation network—A case study," Resources, Conservation & Recycling, Elsevier, vol. 54(11), pages 937-951.
    287. Kumar Rajaram & Charles J. Corbett, 2002. "Achieving Environmental and Productivity Improvements Through Model-Based Process Redesign," Operations Research, INFORMS, vol. 50(5), pages 751-763, October.
    288. Malgorzata Koszewska & Maciej Bielecki, 2020. "How to make furniture industry more circular? The role of component standardisation in ready-to-assemble furniture," Entrepreneurship and Sustainability Issues, VsI Entrepreneurship and Sustainability Center, vol. 7(3), pages 1688-1707, March.
    289. Polotski, Vladimir & Kenne, Jean-Pierre & Gharbi, Ali, 2017. "Production and setup policy optimization for hybrid manufacturing–remanufacturing systems," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 322-333.
    290. Hao Yu & Xu Sun & Wei Deng Solvang & Xu Zhao, 2020. "Reverse Logistics Network Design for Effective Management of Medical Waste in Epidemic Outbreaks: Insights from the Coronavirus Disease 2019 (COVID-19) Outbreak in Wuhan (China)," IJERPH, MDPI, vol. 17(5), pages 1-25, March.
    291. Chao Chen & Shenle Pan & Zhu Wang & Ray Y. Zhong, 2017. "Using taxis to collect citywide E-commerce reverse flows: a crowdsourcing solution," International Journal of Production Research, Taylor & Francis Journals, vol. 55(7), pages 1833-1844, April.
    292. Agrawal, Saurabh & Singh, Rajesh K. & Murtaza, Qasim, 2015. "A literature review and perspectives in reverse logistics," Resources, Conservation & Recycling, Elsevier, vol. 97(C), pages 76-92.
    293. Kozlovskaya, Nadezhda & Pakhomova, Nadezhda & Richter, Knut, 2016. "A general production and recovery EOQ model with stationary demand and return rates," Discussion Papers 378, European University Viadrina Frankfurt (Oder), Department of Business Administration and Economics.
    294. Yong-Tong Chen & Zhong-Chen Cao, 2020. "An Investigation on a Closed-Loop Supply Chain of Product Recycling Using a Multi-Agent and Priority Based Genetic Algorithm Approach," Mathematics, MDPI, vol. 8(6), pages 1-20, June.
    295. Saberi, Sara & Cruz, Jose M. & Sarkis, Joseph & Nagurney, Anna, 2018. "A competitive multiperiod supply chain network model with freight carriers and green technology investment option," European Journal of Operational Research, Elsevier, vol. 266(3), pages 934-949.
    296. Gu, Wenjun & Chhajed, Dilip & Petruzzi, Nicholas C. & Yalabik, Baris, 2015. "Quality design and environmental implications of green consumerism in remanufacturing," International Journal of Production Economics, Elsevier, vol. 162(C), pages 55-69.
    297. Evangelos Sambracos & Irene Ramfou, 2013. "Freight Transport Time Savings and Organizational Performance: A Systemic Approach," International Journal of Business and Economic Sciences Applied Research (IJBESAR), International Hellenic University (IHU), Kavala Campus, Greece (formerly Eastern Macedonia and Thrace Institute of Technology - EMaTTech), vol. 6(1), pages 19-40, April.
    298. Rajesh, R., 2020. "Sustainable supply chains in the Indian context: An integrative decision-making model," Technology in Society, Elsevier, vol. 61(C).
    299. Zhiguo Wang, 2023. "Recycling Pricing and Government Subsidy Strategy for End-of-Life Vehicles in a Reverse Supply Chain under Consumer Recycling Channel Preferences," Mathematics, MDPI, vol. 12(1), pages 1-20, December.
    300. Rui Li & Xin Chen, 2022. "Reverse Logistics Network Design under Disruption Risk for Third-Party Logistics Providers," Sustainability, MDPI, vol. 14(22), pages 1-24, November.
    301. Dobos, Imre & Richter, Knut, 2006. "A production/recycling model with quality consideration," International Journal of Production Economics, Elsevier, vol. 104(2), pages 571-579, December.
    302. Vitor William Batista Martins & Denilson Ricardo de Lucena Nunes & André Cristiano Silva Melo & Rayra Brandão & Antônio Erlindo Braga Júnior & Verônica de Menezes Nascimento Nagata, 2022. "Analysis of the Activities That Make Up the Reverse Logistics Processes and Their Importance for the Future of Logistics Networks: An Exploratory Study Using the TOPSIS Technique," Logistics, MDPI, vol. 6(3), pages 1-17, August.
    303. Jonathan D. Linton & David A. Johnston, 2000. "A Decision Support System for Planning Remanufacturing at Nortel Networks," Interfaces, INFORMS, vol. 30(6), pages 17-31, December.
    304. Kleber, Rainer & Minner, Stefan & Kiesmuller, Gudrun, 2002. "A continuous time inventory model for a product recovery system with multiple options," International Journal of Production Economics, Elsevier, vol. 79(2), pages 121-141, September.
    305. Cardoso, Sónia R. & Barbosa-Póvoa, Ana Paula F.D. & Relvas, Susana, 2013. "Design and planning of supply chains with integration of reverse logistics activities under demand uncertainty," European Journal of Operational Research, Elsevier, vol. 226(3), pages 436-451.
    306. Jayaraman, Vaidyanathan & Patterson, Raymond A. & Rolland, Erik, 2003. "The design of reverse distribution networks: Models and solution procedures," European Journal of Operational Research, Elsevier, vol. 150(1), pages 128-149, October.

  21. van der Laan, Erwin & Dekker, Rommert & Salomon, Marc, 1996. "Product remanufacturing and disposal: A numerical comparison of alternative control strategies," International Journal of Production Economics, Elsevier, vol. 45(1-3), pages 489-498, August.

    Cited by:

    1. Wang, Ziping & Yao, Dong-Qing & Huang, Peiqing, 2007. "A new location-inventory policy with reverse logistics applied to B2C e-markets of China," International Journal of Production Economics, Elsevier, vol. 107(2), pages 350-363, June.
    2. Andiç, Esen & Yurt, Öznur & Baltacıoğlu, Tunçdan, 2012. "Green supply chains: Efforts and potential applications for the Turkish market," Resources, Conservation & Recycling, Elsevier, vol. 58(C), pages 50-68.
    3. Fleischmann, Moritz & Kuik, Roelof, 2003. "On optimal inventory control with independent stochastic item returns," European Journal of Operational Research, Elsevier, vol. 151(1), pages 25-37, November.
    4. Hsueh, Che-Fu, 2011. "An inventory control model with consideration of remanufacturing and product life cycle," International Journal of Production Economics, Elsevier, vol. 133(2), pages 645-652, October.
    5. Pokharel, Shaligram & Mutha, Akshay, 2009. "Perspectives in reverse logistics: A review," Resources, Conservation & Recycling, Elsevier, vol. 53(4), pages 175-182.
    6. Kim, Eungab & Saghafian, Soroush & Van Oyen, Mark P., 2013. "Joint control of production, remanufacturing, and disposal activities in a hybrid manufacturing–remanufacturing system," European Journal of Operational Research, Elsevier, vol. 231(2), pages 337-348.
    7. Mahadevan, B. & Pyke, David F. & Fleischmann, Moritz, 2003. "Periodic review, push inventory policies for remanufacturing," European Journal of Operational Research, Elsevier, vol. 151(3), pages 536-551, December.
    8. Z P Bayındır & N Erkip & R Güllü, 2005. "Assessing the benefits of remanufacturing option under one-way substitution," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(3), pages 286-296, March.
    9. Fleischmann, Moritz & Bloemhof-Ruwaard, Jacqueline M. & Dekker, Rommert & van der Laan, Erwin & van Nunen, Jo A. E. E. & Van Wassenhove, Luk N., 1997. "Quantitative models for reverse logistics: A review," European Journal of Operational Research, Elsevier, vol. 103(1), pages 1-17, November.
    10. Li, Jianzhi & González, Miguel & Zhu, Yun, 2009. "A hybrid simulation optimization method for production planning of dedicated remanufacturing," International Journal of Production Economics, Elsevier, vol. 117(2), pages 286-301, February.
    11. Sebnem Ahiska, S. & King, Russell E., 2010. "Inventory optimization in a one product recoverable manufacturing system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 11-19, March.
    12. van der Laan, Erwin & Salomon, Marc, 1997. "Production planning and inventory control with remanufacturing and disposal," European Journal of Operational Research, Elsevier, vol. 102(2), pages 264-278, October.
    13. Daniel, V. & Guide, R. Jr., 1997. "Scheduling with priority dispatching rules and drum-buffer-rope in a recoverable manufacturing system," International Journal of Production Economics, Elsevier, vol. 53(1), pages 101-116, November.
    14. Elnaz Kanani Kuchesfehani & Elena M. Parilina & Georges Zaccour, 2023. "Revenue and cost sharing contract in a dynamic closed-loop supply chain with uncertain parameters," Annals of Operations Research, Springer, vol. 322(2), pages 851-877, March.
    15. Vlachos, D. & Dekker, R., 2000. "Return handling options and order quantities for single period products," Econometric Institute Research Papers EI 2000-29/A, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    16. Ahiska, S. Sebnem & King, Russell E., 2010. "Life cycle inventory policy characterizations for a single-product recoverable system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 51-61, March.
    17. Bao, Xing & Tang, Ou & Ji, Jianhua, 2008. "Applying the minimum relative entropy method for bimodal distribution in a remanufacturing system," International Journal of Production Economics, Elsevier, vol. 113(2), pages 969-979, June.
    18. Kaya, Onur, 2010. "Incentive and production decisions for remanufacturing operations," European Journal of Operational Research, Elsevier, vol. 201(2), pages 442-453, March.
    19. Nenes, George & Panagiotidou, Sofia & Dekker, Rommert, 2010. "Inventory control policies for inspection and remanufacturing of returns: A case study," International Journal of Production Economics, Elsevier, vol. 125(2), pages 300-312, June.
    20. Inderfurth, Karl & van der Laan, Erwin, 2001. "Leadtime effects and policy improvement for stochastic inventory control with remanufacturing," International Journal of Production Economics, Elsevier, vol. 71(1-3), pages 381-390, May.
    21. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    22. Duong, Quang Huy & Zhou, Li & Meng, Meng & Nguyen, Truong Van & Ieromonachou, Petros & Nguyen, Duy Tiep, 2022. "Understanding product returns: A systematic literature review using machine learning and bibliometric analysis," International Journal of Production Economics, Elsevier, vol. 243(C).
    23. V. Daniel R. Guide & Vaidyanathan Jayaraman & Rajesh Srivastava & W. C. Benton, 2000. "Supply-Chain Management for Recoverable Manufacturing Systems," Interfaces, INFORMS, vol. 30(3), pages 125-142, June.
    24. Bayindir, Z.P. & Erkip, N. & Gullu, R., 2003. "Assessing the benefits of remanufacturing option under one-way substitution and capacity constraint," Econometric Institute Research Papers EI 2003-19, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    25. Linton, Jonathan D. & Yeomans, J. Scott & Yoogalingam, Reena, 2005. "Recovery and reclamation of durable goods: a study of television CRTs," Resources, Conservation & Recycling, Elsevier, vol. 43(4), pages 337-352.

  22. van der Laan, Erwin & Dekker, Rommert & Salomon, Marc & Ridder, Ad, 1996. "An (s, Q) inventory model with remanufacturing and disposal," International Journal of Production Economics, Elsevier, vol. 46(1), pages 339-350, December.

    Cited by:

    1. Sy, Charlle, 2017. "A policy development model for reducing bullwhips in hybrid production-distribution systems," International Journal of Production Economics, Elsevier, vol. 190(C), pages 67-79.
    2. Gou, Qinglong & Liang, Liang & Huang, Zhimin & Xu, Chuanyong, 2008. "A joint inventory model for an open-loop reverse supply chain," International Journal of Production Economics, Elsevier, vol. 116(1), pages 28-42, November.
    3. Hsueh, Che-Fu, 2011. "An inventory control model with consideration of remanufacturing and product life cycle," International Journal of Production Economics, Elsevier, vol. 133(2), pages 645-652, October.
    4. van der Laan, E.A. & Teunter, R.H., 2004. "Simple heuristics for push and pull remanufacturing policies," Econometric Institute Research Papers EI 2004-34, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    5. Gayon, Jean-Philippe & Vercraene, Samuel & Flapper, Simme Douwe P., 2017. "Optimal control of a production-inventory system with product returns and two disposal options," European Journal of Operational Research, Elsevier, vol. 262(2), pages 499-508.
    6. Kim, Eungab & Saghafian, Soroush & Van Oyen, Mark P., 2013. "Joint control of production, remanufacturing, and disposal activities in a hybrid manufacturing–remanufacturing system," European Journal of Operational Research, Elsevier, vol. 231(2), pages 337-348.
    7. Vercraene, Samuel & Gayon, Jean-Philippe, 2013. "Optimal control of a production-inventory system with productreturns," International Journal of Production Economics, Elsevier, vol. 142(2), pages 302-310.
    8. Gregory A. DeCroix, 2006. "Optimal Policy for a Multiechelon Inventory System with Remanufacturing," Operations Research, INFORMS, vol. 54(3), pages 532-543, June.
    9. Z P Bayındır & N Erkip & R Güllü, 2005. "Assessing the benefits of remanufacturing option under one-way substitution," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(3), pages 286-296, March.
    10. Richter, Knut & Dobos, Imre, 1999. "Analysis of the EOQ repair and waste disposal problem with integer setup numbers," International Journal of Production Economics, Elsevier, vol. 59(1-3), pages 463-467, March.
    11. Fleischmann, Moritz & Bloemhof-Ruwaard, Jacqueline M. & Dekker, Rommert & van der Laan, Erwin & van Nunen, Jo A. E. E. & Van Wassenhove, Luk N., 1997. "Quantitative models for reverse logistics: A review," European Journal of Operational Research, Elsevier, vol. 103(1), pages 1-17, November.
    12. Choi, Dae-Won & Hwang, Hark & Koh, Shie-Gheun, 2007. "A generalized ordering and recovery policy for reusable items," European Journal of Operational Research, Elsevier, vol. 182(2), pages 764-774, October.
    13. Shih, Jhih-Shyang & Louis, Garrick, 2002. "A Flexible Inventory Model for Municipal Solid Waste Recycling," RFF Working Paper Series dp-02-48, Resources for the Future.
    14. Bayindir, Z. Pelin & Erkip, Nesim & Gullu, Refik, 2003. "A model to evaluate inventory costs in a remanufacturing environment," International Journal of Production Economics, Elsevier, vol. 81(1), pages 597-607, January.
    15. van der Laan, Erwin & Salomon, Marc, 1997. "Production planning and inventory control with remanufacturing and disposal," European Journal of Operational Research, Elsevier, vol. 102(2), pages 264-278, October.
    16. van der Laan, Erwin & Dekker, Rommert & Salomon, Marc, 1996. "Product remanufacturing and disposal: A numerical comparison of alternative control strategies," International Journal of Production Economics, Elsevier, vol. 45(1-3), pages 489-498, August.
    17. Bloemhof-Ruwaard, Jacqueline M. & van Beek, Paul & Hordijk, Leen & Van Wassenhove, Luk N., 1995. "Interactions between operational research and environmental management," European Journal of Operational Research, Elsevier, vol. 85(2), pages 229-243, September.
    18. Huynh, Candice H. & So, Kut C. & Gurnani, Haresh, 2016. "Managing a closed-loop supply system with random returns and a cyclic delivery schedule," European Journal of Operational Research, Elsevier, vol. 255(3), pages 787-796.
    19. Feng, Yan & Viswanathan, S., 2014. "Heuristics with guaranteed performance bounds for a manufacturing system with product recovery," European Journal of Operational Research, Elsevier, vol. 232(2), pages 322-329.
    20. Erwin van der Laan & Marc Salomon & Rommert Dekker & Luk Van Wassenhove, 1999. "Inventory Control in Hybrid Systems with Remanufacturing," Management Science, INFORMS, vol. 45(5), pages 733-747, May.
    21. Ching-Chin Chern & Hsin-Mei Wang & Kwei-Long Huang, 2017. "A heuristic master planning algorithm for recycling supply chain management," Journal of Intelligent Manufacturing, Springer, vol. 28(4), pages 985-1003, April.
    22. Vercraene, Samuel & Gayon, Jean-Philippe & Flapper, Simme Douwe, 2014. "Coordination of manufacturing, remanufacturing and returns acceptance in hybrid manufacturing/remanufacturing systems," International Journal of Production Economics, Elsevier, vol. 148(C), pages 62-70.
    23. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    24. Pinçe, Çerag & Gürler, Ülkü & Berk, Emre, 2008. "A continuous review replenishment-disposal policy for an inventory system with autonomous supply and fixed disposal costs," European Journal of Operational Research, Elsevier, vol. 190(2), pages 421-442, October.
    25. Duong, Quang Huy & Zhou, Li & Meng, Meng & Nguyen, Truong Van & Ieromonachou, Petros & Nguyen, Duy Tiep, 2022. "Understanding product returns: A systematic literature review using machine learning and bibliometric analysis," International Journal of Production Economics, Elsevier, vol. 243(C).
    26. V. Daniel R. Guide & Vaidyanathan Jayaraman & Rajesh Srivastava & W. C. Benton, 2000. "Supply-Chain Management for Recoverable Manufacturing Systems," Interfaces, INFORMS, vol. 30(3), pages 125-142, June.
    27. Bayindir, Z.P. & Erkip, N. & Gullu, R., 2003. "Assessing the benefits of remanufacturing option under one-way substitution and capacity constraint," Econometric Institute Research Papers EI 2003-19, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.

IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.