IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v143y2013i2p557-566.html
   My bibliography  Save this article

Collaboration for a closed-loop deteriorating inventory supply chain with multi-retailer and price-sensitive demand

Author

Listed:
  • Yang, P.C.
  • Chung, S.L.
  • Wee, H.M.
  • Zahara, E.
  • Peng, C.Y.

Abstract

In this paper, a closed-loop logistics system with manufacturing and remanufacturing cycle is analyzed using three optimization methods. They are: (i) sequential optimization, (ii) centralized optimization without benefit sharing, and (iii) centralized optimization with benefit sharing. In the first method, the decisions of sequential optimization are made initially by the retailers, and then by the manufacturer. In the second method, the decision of the centralized optimization is made simultaneously by the whole logistics system. The second method is not favorable to the retailers because the retailers' profit will become smaller as a result of collaboration. Therefore a third method with benefit sharing is investigated. The logistics system includes a manufacturer and multi-retailer considering price-sensitive demand and deterioration. Industrial examples of such products are IC chips, computers and mobile phones that usually outdate or decrease in value due to technological innovation. The decrease in value is considered as a form of deterioration. In order to add value, these outdated products can be remanufactured and resold to market. Four key effects are investigated in this study: (i) recycling in supply chain, (ii) deterioration, (iii) collaboration effect between manufacturer and retailers using three optimization methods, and (iv) price sensitive demand.

Suggested Citation

  • Yang, P.C. & Chung, S.L. & Wee, H.M. & Zahara, E. & Peng, C.Y., 2013. "Collaboration for a closed-loop deteriorating inventory supply chain with multi-retailer and price-sensitive demand," International Journal of Production Economics, Elsevier, vol. 143(2), pages 557-566.
  • Handle: RePEc:eee:proeco:v:143:y:2013:i:2:p:557-566
    DOI: 10.1016/j.ijpe.2012.07.020
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527312003271
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.ijpe.2012.07.020?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Jaber, Mohamad Y. & El Saadany, Ahmed M.A., 2009. "The production, remanufacture and waste disposal model with lost sales," International Journal of Production Economics, Elsevier, vol. 120(1), pages 115-124, July.
    2. Andrew J. Clark & Herbert Scarf, 2004. "Optimal Policies for a Multi-Echelon Inventory Problem," Management Science, INFORMS, vol. 50(12_supple), pages 1782-1790, December.
    3. Feng, Yan & Viswanathan, S., 2011. "A new lot-sizing heuristic for manufacturing systems with product recovery," International Journal of Production Economics, Elsevier, vol. 133(1), pages 432-438, September.
    4. Chung, Chun-Jen & Wee, Hui-Ming, 2011. "Short life-cycle deteriorating product remanufacturing in a green supply chain inventory control system," International Journal of Production Economics, Elsevier, vol. 129(1), pages 195-203, January.
    5. Wee, Hui-Ming & Lee, Ming-Chang & Yu, Jonas C.P. & Edward Wang, C., 2011. "Optimal replenishment policy for a deteriorating green product: Life cycle costing analysis," International Journal of Production Economics, Elsevier, vol. 133(2), pages 603-611, October.
    6. Teunter, Ruud & van der Laan, Erwin, 2002. "On the non-optimality of the average cost approach for inventory models with remanufacturing," International Journal of Production Economics, Elsevier, vol. 79(1), pages 67-73, September.
    7. Hsu, P.H. & Wee, H.M. & Teng, H.M., 2010. "Preservation technology investment for deteriorating inventory," International Journal of Production Economics, Elsevier, vol. 124(2), pages 388-394, April.
    8. P C Yang & H M Wee & J C P Yu, 2007. "Collaborative pricing and replenishment policy for hi-tech industry," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 58(7), pages 894-900, July.
    9. Widyadana, Gede Agus & Wee, Hui Ming, 2012. "An economic production quantity model for deteriorating items with multiple production setups and rework," International Journal of Production Economics, Elsevier, vol. 138(1), pages 62-67.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Janssen, Larissa & Claus, Thorsten & Sauer, Jürgen, 2016. "Literature review of deteriorating inventory models by key topics from 2012 to 2015," International Journal of Production Economics, Elsevier, vol. 182(C), pages 86-112.
    2. He, Yuanjie, 2015. "Acquisition pricing and remanufacturing decisions in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 163(C), pages 48-60.
    3. Smita Rani & Rashid Ali & Anchal Agarwal, 2019. "Fuzzy inventory model for deteriorating items in a green supply chain with carbon concerned demand," OPSEARCH, Springer;Operational Research Society of India, vol. 56(1), pages 91-122, March.
    4. Muhammad Waqas Iqbal & Muhammad Babar Ramzan & Asif Iqbal Malik, 2022. "Food Preservation within Multi-Echelon Supply Chain Considering Single Setup and Multi-Deliveries of Unequal Lot Size," Sustainability, MDPI, vol. 14(11), pages 1-30, June.
    5. Taleizadeh, Ata Allah & Moshtagh, Mohammad Sadegh, 2019. "A consignment stock scheme for closed loop supply chain with imperfect manufacturing processes, lost sales, and quality dependent return: Multi Levels Structure," International Journal of Production Economics, Elsevier, vol. 217(C), pages 298-316.
    6. Liao, Shu-Hsien & Hu, Da-Chian & Ding, Li-Wen, 2017. "Assessing the influence of supply chain collaboration value innovation, supply chain capability and competitive advantage in Taiwan's networking communication industry," International Journal of Production Economics, Elsevier, vol. 191(C), pages 143-153.
    7. He, Yuanjie, 2017. "Supply risk sharing in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 183(PA), pages 39-52.
    8. Su, Rung-Hung & Weng, Ming-Wei & Yang, Chih-Te, 2021. "Effects of corporate social responsibility activities in a two-stage assembly production system with multiple components and imperfect processes," European Journal of Operational Research, Elsevier, vol. 293(2), pages 469-480.
    9. Lingli Shu & Xuedong Liang & Jingyuan Yao & Peng Luo, 2023. "Price Optimization of Closed-loop Supply Chain With Uncertain Demand Under Multi-channel Cross Influence," SAGE Open, , vol. 13(4), pages 21582440231, December.
    10. Luttiely Santos Oliveira & Ricardo Luiz Machado, 2021. "Application of optimization methods in the closed-loop supply chain: a literature review," Journal of Combinatorial Optimization, Springer, vol. 41(2), pages 357-400, February.
    11. Felix T.S. Chan & Nan Li & S.H. Chung & Mozafar Saadat, 2017. "Management of sustainable manufacturing systems-a review on mathematical problems," International Journal of Production Research, Taylor & Francis Journals, vol. 55(4), pages 1210-1225, February.
    12. Juan Pedro Sepúlveda-Rojas & Rodrigo Ternero, 2020. "Analysis of the Value of Information and Coordination in a Dyadic Closed Loop Supply Chain," Sustainability, MDPI, vol. 12(20), pages 1-18, October.
    13. Larissa Janssen & Jürgen Sauer & Thorsten Claus & Alfred Wulff, 2017. "Abfallreduktion im Lebensmitteleinzelhandel mittels einer internen Warenumverteilung [Waste reduction in a retail food chain via a internal transfer of goods]," NachhaltigkeitsManagementForum | Sustainability Management Forum, Springer, vol. 25(1), pages 109-116, June.
    14. Sarkar, Biswajit & Ganguly, Baishakhi & Sarkar, Mitali & Pareek, Sarla, 2016. "Effect of variable transportation and carbon emission in a three-echelon supply chain model," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 91(C), pages 112-128.
    15. Jauhari, Wakhid Ahmad & Adam, Niimas Ayu Frensilia Putri & Rosyidi, Cucuk Nur & Pujawan, I Nyoman & Shah, Nita H., 2020. "A closed-loop supply chain model with rework, waste disposal, and carbon emissions," Operations Research Perspectives, Elsevier, vol. 7(C).
    16. Taleizadeh, Ata Allah, 2014. "An EOQ model with partial backordering and advance payments for an evaporating item," International Journal of Production Economics, Elsevier, vol. 155(C), pages 185-193.
    17. Taleizadeh, Ata Allah & Moshtagh, Mohammad Sadegh & Vahedi-Nouri, Behdin & Sarkar, Biswajit, 2023. "New products or remanufactured products: Which is consumer-friendly under a closed-loop multi-level supply chain?," Journal of Retailing and Consumer Services, Elsevier, vol. 73(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Widyadana, Gede Agus & Wee, Hui Ming, 2012. "An economic production quantity model for deteriorating items with multiple production setups and rework," International Journal of Production Economics, Elsevier, vol. 138(1), pages 62-67.
    2. Bakker, Monique & Riezebos, Jan & Teunter, Ruud H., 2012. "Review of inventory systems with deterioration since 2001," European Journal of Operational Research, Elsevier, vol. 221(2), pages 275-284.
    3. Katherinne Salas-Navarro & Paula Serrano-Pájaro & Holman Ospina-Mateus & Ronald Zamora-Musa, 2022. "Inventory Models in a Sustainable Supply Chain: A Bibliometric Analysis," Sustainability, MDPI, vol. 14(10), pages 1-21, May.
    4. Zhalechian, M. & Tavakkoli-Moghaddam, R. & Zahiri, B. & Mohammadi, M., 2016. "Sustainable design of a closed-loop location-routing-inventory supply chain network under mixed uncertainty," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 89(C), pages 182-214.
    5. Tai, Allen H. & Xie, Yue & Ching, Wai-Ki, 2016. "Inspection policy for inventory system with deteriorating products," International Journal of Production Economics, Elsevier, vol. 173(C), pages 22-29.
    6. Felix T.S. Chan & Nan Li & S.H. Chung & Mozafar Saadat, 2017. "Management of sustainable manufacturing systems-a review on mathematical problems," International Journal of Production Research, Taylor & Francis Journals, vol. 55(4), pages 1210-1225, February.
    7. Jonrinaldi, & Zhang, D.Z., 2013. "An integrated production and inventory model for a whole manufacturing supply chain involving reverse logistics with finite horizon period," Omega, Elsevier, vol. 41(3), pages 598-620.
    8. Huang, Yeu-Shiang & Su, Wei-Jun & Lin, Zu-Liang, 2011. "A study on lead-time discount coordination for deteriorating products," European Journal of Operational Research, Elsevier, vol. 215(2), pages 358-366, December.
    9. Sarkar, Biswajit & Sarkar, Sumon, 2013. "Variable deterioration and demand—An inventory model," Economic Modelling, Elsevier, vol. 31(C), pages 548-556.
    10. Beullens, Patrick & Janssens, Gerrit K., 2011. "Holding costs under push or pull conditions - The impact of the Anchor Point," European Journal of Operational Research, Elsevier, vol. 215(1), pages 115-125, November.
    11. Chen, Zhixiang & Bidanda, Bopaya, 2019. "Sustainable manufacturing production-inventory decision of multiple factories with JIT logistics, component recovery and emission control," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 128(C), pages 356-383.
    12. Wee, Hui-Ming & Lee, Ming-Chang & Yu, Jonas C.P. & Edward Wang, C., 2011. "Optimal replenishment policy for a deteriorating green product: Life cycle costing analysis," International Journal of Production Economics, Elsevier, vol. 133(2), pages 603-611, October.
    13. Yue Xie & Allen H. Tai & Wai-Ki Ching & Yong-Hong Kuo & Na Song, 2021. "Joint inspection and inventory control for deteriorating items with time-dependent demand and deteriorating rate," Annals of Operations Research, Springer, vol. 300(1), pages 225-265, May.
    14. Smita Rani & Rashid Ali & Anchal Agarwal, 2019. "Fuzzy inventory model for deteriorating items in a green supply chain with carbon concerned demand," OPSEARCH, Springer;Operational Research Society of India, vol. 56(1), pages 91-122, March.
    15. Beullens, Patrick & Janssens, Gerrit K., 2014. "Adapting inventory models for handling various payment structures using net present value equivalence analysis," International Journal of Production Economics, Elsevier, vol. 157(C), pages 190-200.
    16. Kung-Jeng Wang & Yu-Siang Lin, 2012. "Optimal inventory replenishment strategy for deteriorating items in a demand-declining market with the retailer’s price manipulation," Annals of Operations Research, Springer, vol. 201(1), pages 475-494, December.
    17. Hong, I-Hsuan & Yeh, Jun-Sheng, 2012. "Modeling closed-loop supply chains in the electronics industry: A retailer collection application," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 48(4), pages 817-829.
    18. Tai, Allen H. & Xie, Yue & He, Wanhua & Ching, Wai-Ki, 2019. "Joint inspection and inventory control for deteriorating items with random maximum lifetime," International Journal of Production Economics, Elsevier, vol. 207(C), pages 144-162.
    19. Noordhoek, Marije & Dullaert, Wout & Lai, David S.W. & de Leeuw, Sander, 2018. "A simulation–optimization approach for a service-constrained multi-echelon distribution network," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 114(C), pages 292-311.
    20. Tan Wang & L. Jeff Hong, 2023. "Large-Scale Inventory Optimization: A Recurrent Neural Networks–Inspired Simulation Approach," INFORMS Journal on Computing, INFORMS, vol. 35(1), pages 196-215, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:143:y:2013:i:2:p:557-566. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.