IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v140y2012i1p385-395.html
   My bibliography  Save this article

Investing in reusability of products of uncertain remanufacturing cost: The role of inspection capabilities

Author

Listed:
  • Robotis, Andreas
  • Boyaci, Tamer
  • Verter, Vedat

Abstract

We consider a firm equipped with the flexibility to produce and sell both new and remanufactured products and has to invest in (a) increasing the reusability level of its product and (b) collecting used products and remanufacturing them. Our focus is on the effects that the uncertainty in the remanufacturing cost, which originates from the uncertainty in the quality condition of used and potentially remanufacturable products, has on these investments. We show that, contrary to the general belief, the uncertainty in the remanufacturing cost does not necessarily hinder these investments, but the precise effects depend on the inspection capabilities and technologies at the firm's disposal as well as the market parameters.

Suggested Citation

  • Robotis, Andreas & Boyaci, Tamer & Verter, Vedat, 2012. "Investing in reusability of products of uncertain remanufacturing cost: The role of inspection capabilities," International Journal of Production Economics, Elsevier, vol. 140(1), pages 385-395.
    • Handle: RePEc:eee:proeco:v:140:y:2012:i:1:p:385-395
    DOI: 10.1016/j.ijpe.2012.04.017
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527312001776
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2012.04.017?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Roland Geyer & Luk N. Van Wassenhove & Atalay Atasu, 2007. "The Economics of Remanufacturing Under Limited Component Durability and Finite Product Life Cycles," Management Science, INFORMS, vol. 53(1), pages 88-100, January.
    2. Kut C. So & Christopher S. Tang, 1995. "Optimal Batch Sizing and Repair Strategies for Operations with Repairable Jobs," Management Science, INFORMS, vol. 41(5), pages 894-908, May.
    3. L. Beril Toktay & Lawrence M. Wein & Stefanos A. Zenios, 2000. "Inventory Management of Remanufacturable Products," Management Science, INFORMS, vol. 46(11), pages 1412-1426, November.
    4. Geraldo Ferrer & Jayashankar M. Swaminathan, 2006. "Managing New and Remanufactured Products," Management Science, INFORMS, vol. 52(1), pages 15-26, January.
    5. Wang, Hongzhou, 2002. "A survey of maintenance policies of deteriorating systems," European Journal of Operational Research, Elsevier, vol. 139(3), pages 469-489, June.
    6. Erwin van der Laan & Marc Salomon & Rommert Dekker & Luk Van Wassenhove, 1999. "Inventory Control in Hybrid Systems with Remanufacturing," Management Science, INFORMS, vol. 45(5), pages 733-747, May.
    7. V. Daniel R. Guide, Jr. & Ruud H. Teunter & Luk N. Van Wassenhove, 2003. "Matching Demand and Supply to Maximize Profits from Remanufacturing," Manufacturing & Service Operations Management, INFORMS, vol. 5(4), pages 303-316, October.
    8. Harry Groenevelt & Liliane Pintelon & Abraham Seidmann, 1992. "Production Lot Sizing with Machine Breakdowns," Management Science, INFORMS, vol. 38(1), pages 104-123, January.
    9. Frank A. van der Duyn Schouten & Stephan G. Vanneste, 1993. "Two Simple Control Policies for a Multicomponent Maintenance System," Operations Research, INFORMS, vol. 41(6), pages 1125-1136, December.
    10. Laurens G. Debo & L. Beril Toktay & Luk N. Van Wassenhove, 2005. "Market Segmentation and Product Technology Selection for Remanufacturable Products," Management Science, INFORMS, vol. 51(8), pages 1193-1205, August.
    11. Zikopoulos, Christos & Tagaras, George, 2007. "Impact of uncertainty in the quality of returns on the profitability of a single-period refurbishing operation," European Journal of Operational Research, Elsevier, vol. 182(1), pages 205-225, October.
    12. R. Canan Savaskan & Luk N. Van Wassenhove, 2006. "Reverse Channel Design: The Case of Competing Retailers," Management Science, INFORMS, vol. 52(1), pages 1-14, January.
    13. K Sahyouni & R C Savaskan & M S Daskin, 2010. "The effect of lifetime buys on warranty repair operations," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 61(5), pages 790-803, May.
    14. Robotis, Andreas & Bhattacharya, Shantanu & Van Wassenhove, Luk N., 2005. "The effect of remanufacturing on procurement decisions for resellers in secondary markets," European Journal of Operational Research, Elsevier, vol. 163(3), pages 688-705, June.
    15. Tian, Zhigang & Liao, Haitao, 2011. "Condition based maintenance optimization for multi-component systems using proportional hazards model," Reliability Engineering and System Safety, Elsevier, vol. 96(5), pages 581-589.
    16. Saibal Ray & Tamer Boyaci & Necati Aras, 2005. "Optimal Prices and Trade-in Rebates for Durable, Remanufacturable Products," Manufacturing & Service Operations Management, INFORMS, vol. 7(3), pages 208-228, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Alibeiki, Hedayat & Lotfaliei, Babak, 2022. "To expand and to abandon: Real options under asset variance risk premium," European Journal of Operational Research, Elsevier, vol. 300(2), pages 771-787.
    2. Gan, Shu-San & Pujawan, I Nyoman & Suparno, & Widodo, Basuki, 2018. "Pricing decisions for short life-cycle product in a closed-loop supply chain with random yield and random demands," Operations Research Perspectives, Elsevier, vol. 5(C), pages 174-190.
    3. Xingwei Li & Ruonan Huang & Jiachi Dai & Jingru Li & Qiong Shen, 2021. "Research on the Evolutionary Game of Construction and Demolition Waste (CDW) Recycling Units’ Green Behavior, Considering Remanufacturing Capability," IJERPH, MDPI, vol. 18(17), pages 1-32, September.
    4. Shumin Liu & Young-Tae Chang, 2017. "Manufacturers’ Closed-Loop Orientation for Green Supply Chain Management," Sustainability, MDPI, vol. 9(2), pages 1-29, February.
    5. Zhou, Li & Naim, Mohamed M. & Disney, Stephen M., 2017. "The impact of product returns and remanufacturing uncertainties on the dynamic performance of a multi-echelon closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 487-502.
    6. Zikopoulos, Christos & Tagaras, George, 2015. "Reverse supply chains: Effects of collection network and returns classification on profitability," European Journal of Operational Research, Elsevier, vol. 246(2), pages 435-449.
    7. Maiti, T. & Giri, B.C., 2017. "Two-way product recovery in a closed-loop supply chain with variable markup under price and quality dependent demand," International Journal of Production Economics, Elsevier, vol. 183(PA), pages 259-272.
    8. De Giovanni, Pietro & Zaccour, Georges, 2014. "A two-period game of a closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 232(1), pages 22-40.
    9. Reimann, Marc & Xiong, Yu & Zhou, Yu, 2019. "Managing a closed-loop supply chain with process innovation for remanufacturing," European Journal of Operational Research, Elsevier, vol. 276(2), pages 510-518.
    10. Trigeorgis, Lenos & Tsekrekos, Andrianos E., 2018. "Real Options in Operations Research: A Review," European Journal of Operational Research, Elsevier, vol. 270(1), pages 1-24.
    11. Cao, Jian & Wu, Sisi & Kumar, Sanjay, 2023. "Recovering and remanufacturing to fulfill EPR regulation in the presence of secondary market," International Journal of Production Economics, Elsevier, vol. 263(C).
    12. Patricia Rogetzer & Lena Silbermayr & Werner Jammernegg, 2018. "Sustainable sourcing of strategic raw materials by integrating recycled materials," Flexible Services and Manufacturing Journal, Springer, vol. 30(3), pages 421-451, September.
    13. Gunasekara, Lahiru & Robb, David J. & Zhang, Abraham, 2023. "Used product acquisition, sorting and disposition for circular supply chains: Literature review and research directions," International Journal of Production Economics, Elsevier, vol. 260(C).
    14. Hong Zeng & Dongqin Jiang & Yimeng Li, 2022. "Cooperative and Non-Cooperative Green Advertising in the Low-Carbon Supply Chain under Monopoly or Competitive Market," Sustainability, MDPI, vol. 14(15), pages 1-22, July.
    15. Zhu, Qinghua & Sarkis, Joseph & Lai, Kee-hung, 2015. "Reprint of “Supply chain-based barriers for truck-engine remanufacturing in China”," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 74(C), pages 94-108.
    16. Tong Shu & Jiajia Xu & Shou Chen & Shouyang Wang & Kin Keung Lai, 2018. "Remanufacturing Decisions with WTP Discrepancy and Uncertain Quality of Product Returns," Sustainability, MDPI, vol. 10(7), pages 1-23, June.
    17. Y. Sarada & S. Sangeetha, 2022. "Coordinating a reverse supply chain with price and warranty dependent random demand under collection uncertainties," Operational Research, Springer, vol. 22(4), pages 4119-4158, September.
    18. Gu, Wenjun & Chhajed, Dilip & Petruzzi, Nicholas C. & Yalabik, Baris, 2015. "Quality design and environmental implications of green consumerism in remanufacturing," International Journal of Production Economics, Elsevier, vol. 162(C), pages 55-69.
    19. Tianqin Shi & Dilip Chhajed & Zhixi Wan & Yunchuan Liu, 2020. "Distribution Channel Choice and Divisional Conflict in Remanufacturing Operations," Production and Operations Management, Production and Operations Management Society, vol. 29(7), pages 1702-1719, July.
    20. Sabharwal, Srishti & Garg, Suresh, 2013. "Determining cost effectiveness index of remanufacturing: A graph theoretic approach," International Journal of Production Economics, Elsevier, vol. 144(2), pages 521-532.
    21. Han, Xiaohua & Wu, Haiyan & Yang, Qianxia & Shang, Jennifer, 2016. "Reverse channel selection under remanufacturing risks: Balancing profitability and robustness," International Journal of Production Economics, Elsevier, vol. 182(C), pages 63-72.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ferrer, Geraldo & Swaminathan, Jayashankar M., 2010. "Managing new and differentiated remanufactured products," European Journal of Operational Research, Elsevier, vol. 203(2), pages 370-379, June.
    2. De Giovanni, Pietro & Zaccour, Georges, 2014. "A two-period game of a closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 232(1), pages 22-40.
    3. V. Daniel R. Guide & Luk N. Van Wassenhove, 2009. "OR FORUM---The Evolution of Closed-Loop Supply Chain Research," Operations Research, INFORMS, vol. 57(1), pages 10-18, February.
    4. Kleber, Rainer & Reimann, Marc & Souza, Gilvan C. & Zhang, Weihua, 2020. "Two-sided competition with vertical differentiation in both acquisition and sales in remanufacturing," European Journal of Operational Research, Elsevier, vol. 284(2), pages 572-587.
    5. Pokharel, Shaligram & Mutha, Akshay, 2009. "Perspectives in reverse logistics: A review," Resources, Conservation & Recycling, Elsevier, vol. 53(4), pages 175-182.
    6. Wu, Cheng-Han, 2015. "Strategic and operational decisions under sales competition and collection competition for end-of-use products in remanufacturing," International Journal of Production Economics, Elsevier, vol. 169(C), pages 11-20.
    7. Gernot Lechner & Marc Reimann, 2013. "The effect of active used product acquisition on manufacturing and remanufacturing strategies," Working Paper Series, Social and Economic Sciences 2013-01, Faculty of Social and Economic Sciences, Karl-Franzens-University Graz.
    8. Sungwook Yoon & Sukjae Jeong, 2017. "Investment Strategy in a Closed Loop Supply Chain: The Case of a Market with Competition between Two Retailers," Sustainability, MDPI, vol. 9(10), pages 1-32, September.
    9. Chen, Jen-Ming & Chang, Chia-I, 2012. "The co-opetitive strategy of a closed-loop supply chain with remanufacturing," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 48(2), pages 387-400.
    10. Liao, Haolan & Zhang, Qingyu & Shen, Neng & Nie, Yongyou & Li, Lu, 2021. "Coordination between forward and reverse production streams for maximum profitability," Omega, Elsevier, vol. 104(C).
    11. Chen, Wenyi & Kucukyazici, Beste & Verter, Vedat & Jesús Sáenz, María, 2015. "Supply chain design for unlocking the value of remanufacturing under uncertainty," European Journal of Operational Research, Elsevier, vol. 247(3), pages 804-819.
    12. Xue, Dongmei & Teunter, Ruud H. & Zhu, Stuart X. & Zhou, Weihua, 2021. "Entering the high-end market by collecting and remanufacturing a competitor’s high-end cores," Omega, Elsevier, vol. 99(C).
    13. Ma, Peng & Gong, Yeming & Mirchandani, Prakash, 2020. "Trade-in for remanufactured products: Pricing with double reference effects," International Journal of Production Economics, Elsevier, vol. 230(C).
    14. Sheu, Jiuh-Biing & Chen, Yenming J., 2012. "Impact of government financial intervention on competition among green supply chains," International Journal of Production Economics, Elsevier, vol. 138(1), pages 201-213.
    15. Yalabik, Baris & Chhajed, Dilip & Petruzzi, Nicholas C., 2014. "Product and sales contract design in remanufacturing," International Journal of Production Economics, Elsevier, vol. 154(C), pages 299-312.
    16. Xiao, Yongbo, 2017. "Choosing the right exchange-old-for-new programs for durable goods with a rollover," European Journal of Operational Research, Elsevier, vol. 259(2), pages 512-526.
    17. Liu, Wenjie & Liu, Wei & Shen, Ningning & Xu, Zhitao & Xie, Naiming & Chen, Jian & Zhou, Huiyu, 2022. "Pricing and collection decisions of a closed-loop supply chain with fuzzy demand," International Journal of Production Economics, Elsevier, vol. 245(C).
    18. Erzurumlu, S. Sinan, 2013. "The compatibility of durable goods with contingent generic consumables," Omega, Elsevier, vol. 41(3), pages 574-585.
    19. Yenipazarli, Arda, 2016. "Managing new and remanufactured products to mitigate environmental damage under emissions regulation," European Journal of Operational Research, Elsevier, vol. 249(1), pages 117-130.
    20. Ramani, Vinay & De Giovanni, Pietro, 2017. "A two-period model of product cannibalization in an atypical Closed-loop Supply Chain with endogenous returns: The case of DellReconnect," European Journal of Operational Research, Elsevier, vol. 262(3), pages 1009-1027.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:140:y:2012:i:1:p:385-395. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.