IDEAS home Printed from https://ideas.repec.org/a/eee/recore/v43y2005i4p337-352.html
   My bibliography  Save this article

Recovery and reclamation of durable goods: a study of television CRTs

Author

Listed:
  • Linton, Jonathan D.
  • Yeomans, J. Scott
  • Yoogalingam, Reena

Abstract

The nature of the waste flows for durable goods are considered from the perspective of management options for inventory control if one wishes to use disposed durable goods as an input in the production of products. Television CRTs are used as an example, since they are a durable good and are the focus of recent regulation in many different countries. Inventory policy is found to be important, since there is great uncertainty in the quantity of product available both from year to year or within an actual year. Uncertainty in volume is not a problem, if only a small percentage of the waste stream is desired. Consequently, a strategy of postponement is recommended. However, if it is anticipated that a high percentage of the waste stream will be utilized, then inventory policy becomes more complex. Due to storage behavior, it is possible that a postponement policy may also be used by controlling disposal rates through encouraging or discouraging disposal at different times based on the need for material inputs.

Suggested Citation

  • Linton, Jonathan D. & Yeomans, J. Scott & Yoogalingam, Reena, 2005. "Recovery and reclamation of durable goods: a study of television CRTs," Resources, Conservation & Recycling, Elsevier, vol. 43(4), pages 337-352.
    • Handle: RePEc:eee:recore:v:43:y:2005:i:4:p:337-352
    DOI: 10.1016/j.resconrec.2004.06.008
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0921344904001272
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resconrec.2004.06.008?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Pieter van Beukering & Anantha Duraiappah, 1998. "The Economic and Environmental Impact of Wastepaper Trade and Recycling in India," Journal of Industrial Ecology, Yale University, vol. 2(2), pages 23-42, April.
    2. Barry L. Bayus, 1993. "High-Definition Television: Assessing Demand Forecasts for a Next Generation Consumer Durable," Management Science, INFORMS, vol. 39(11), pages 1319-1333, November.
    3. Jonathan D. Linton & David A. Johnston, 2000. "A Decision Support System for Planning Remanufacturing at Nortel Networks," Interfaces, INFORMS, vol. 30(6), pages 17-31, December.
    4. van der Laan, Erwin & Salomon, Marc, 1997. "Production planning and inventory control with remanufacturing and disposal," European Journal of Operational Research, Elsevier, vol. 102(2), pages 264-278, October.
    5. David Rejeski, 1998. "Learning before Doing: Simulation and Modeling in Industrial Ecology," Journal of Industrial Ecology, Yale University, vol. 2(4), pages 29-43, October.
    6. J D Linton & J S Yeomans & R Yoogalingam, 2002. "Supply planning for industrial ecology and remanufacturing under uncertainty: a numerical study of leaded-waste recovery from television disposal," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 53(11), pages 1185-1196, November.
    7. van der Laan, Erwin & Dekker, Rommert & Salomon, Marc, 1996. "Product remanufacturing and disposal: A numerical comparison of alternative control strategies," International Journal of Production Economics, Elsevier, vol. 45(1-3), pages 489-498, August.
    8. V. Daniel R. Guide & Vaidyanathan Jayaraman & Rajesh Srivastava & W. C. Benton, 2000. "Supply-Chain Management for Recoverable Manufacturing Systems," Interfaces, INFORMS, vol. 30(3), pages 125-142, June.
    9. Erwin van der Laan & Marc Salomon & Rommert Dekker & Luk Van Wassenhove, 1999. "Inventory Control in Hybrid Systems with Remanufacturing," Management Science, INFORMS, vol. 45(5), pages 733-747, May.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Leigh, Nancey Green & Realff, Matthew J. & Ai, Ning & French, Steven P. & Ross, Catherine L. & Bras, Bert, 2007. "Modeling obsolete computer stock under regional data constraints: An Atlanta case study," Resources, Conservation & Recycling, Elsevier, vol. 51(4), pages 847-869.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sebnem Ahiska, S. & King, Russell E., 2010. "Inventory optimization in a one product recoverable manufacturing system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 11-19, March.
    2. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    3. Hsueh, Che-Fu, 2011. "An inventory control model with consideration of remanufacturing and product life cycle," International Journal of Production Economics, Elsevier, vol. 133(2), pages 645-652, October.
    4. Ahiska, S. Sebnem & King, Russell E., 2010. "Life cycle inventory policy characterizations for a single-product recoverable system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 51-61, March.
    5. Fleischmann, Moritz & Kuik, Roelof, 2003. "On optimal inventory control with independent stochastic item returns," European Journal of Operational Research, Elsevier, vol. 151(1), pages 25-37, November.
    6. Jian Yang & Boaz Golany & Gang Yu, 2005. "A concave‐cost production planning problem with remanufacturing options," Naval Research Logistics (NRL), John Wiley & Sons, vol. 52(5), pages 443-458, August.
    7. Andiç, Esen & Yurt, Öznur & Baltacıoğlu, Tunçdan, 2012. "Green supply chains: Efforts and potential applications for the Turkish market," Resources, Conservation & Recycling, Elsevier, vol. 58(C), pages 50-68.
    8. Z P Bayındır & N Erkip & R Güllü, 2005. "Assessing the benefits of remanufacturing option under one-way substitution," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(3), pages 286-296, March.
    9. Pokharel, Shaligram & Mutha, Akshay, 2009. "Perspectives in reverse logistics: A review," Resources, Conservation & Recycling, Elsevier, vol. 53(4), pages 175-182.
    10. Kim, Eungab & Saghafian, Soroush & Van Oyen, Mark P., 2013. "Joint control of production, remanufacturing, and disposal activities in a hybrid manufacturing–remanufacturing system," European Journal of Operational Research, Elsevier, vol. 231(2), pages 337-348.
    11. Teunter, Ruud H. & Vlachos, Dimitrios, 2002. "On the necessity of a disposal option for returned items that can be remanufactured," International Journal of Production Economics, Elsevier, vol. 75(3), pages 257-266, February.
    12. De Giovanni, Pietro & Zaccour, Georges, 2014. "A two-period game of a closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 232(1), pages 22-40.
    13. Bayindir, Z. Pelin & Erkip, Nesim & Gullu, Refik, 2003. "A model to evaluate inventory costs in a remanufacturing environment," International Journal of Production Economics, Elsevier, vol. 81(1), pages 597-607, January.
    14. Nenes, George & Panagiotidou, Sofia & Dekker, Rommert, 2010. "Inventory control policies for inspection and remanufacturing of returns: A case study," International Journal of Production Economics, Elsevier, vol. 125(2), pages 300-312, June.
    15. Duong, Quang Huy & Zhou, Li & Meng, Meng & Nguyen, Truong Van & Ieromonachou, Petros & Nguyen, Duy Tiep, 2022. "Understanding product returns: A systematic literature review using machine learning and bibliometric analysis," International Journal of Production Economics, Elsevier, vol. 243(C).
    16. Gregory A. DeCroix, 2006. "Optimal Policy for a Multiechelon Inventory System with Remanufacturing," Operations Research, INFORMS, vol. 54(3), pages 532-543, June.
    17. Mahadevan, B. & Pyke, David F. & Fleischmann, Moritz, 2003. "Periodic review, push inventory policies for remanufacturing," European Journal of Operational Research, Elsevier, vol. 151(3), pages 536-551, December.
    18. Shi, Jianmai & Zhang, Guoqing & Sha, Jichang, 2011. "Optimal production and pricing policy for a closed loop system," Resources, Conservation & Recycling, Elsevier, vol. 55(6), pages 639-647.
    19. Teunter, R.H. & Bayindir, Z.P. & van den Heuvel, W., 2005. "Dynamic lot sizing with product returns," Econometric Institute Research Papers EI 2005-17, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    20. Fleischmann, Moritz & Kuik, Roelof & Dekker, Rommert, 2002. "Controlling inventories with stochastic item returns: A basic model," European Journal of Operational Research, Elsevier, vol. 138(1), pages 63-75, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore:v:43:y:2005:i:4:p:337-352. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.