Printed from https://ideas.repec.org/s/sae/risrel3.html
Content
February 2020, Volume 234, Issue 1
- 183-192 The extended living probabilistic safety assessment
by Marko ÄŒepin - 193-207 Building and using dynamic risk-informed diagnosis procedures for complex system accidents
by Katrina M Groth & Matthew R Denman & Michael C Darling & Thomas B Jones & George F Luger - 208-218 RETRACTED: A novel imprecise reliability prediction method for incomplete lifetime data based on two-parameter Weibull distribution
by Bi Liu & Yunlong Teng & Qi Huang
December 2019, Volume 233, Issue 6
- 925-942 A weighted K-means clustering approach to solve the redundancy allocation problem of systems having components with different failures
by Behzad Karimi & Seyed Taghi Akhavan Niaki & Seyyed Masih Miriha & Mahsa Ghare Hasanluo & Shima Javanmard - 943-957 Structural reliability and reliability sensitivity analysis of extremely rare failure events by combining sampling and surrogate model methods
by Pengfei Wei & Chenghu Tang & Yuting Yang - 958-971 A neuro-particle swarm optimization logistic model fitting algorithm for software reliability analysis
by Pooja Rani & GS Mahapatra - 972-977 Reliability analysis of weighted- k -out-of- n system consisting of three-state components
by Serkan Eryilmaz & Ali Riza Bozbulut - 978-989 An optimal preventive maintenance strategy for the hydraulic system of platform firefighting vehicle based on the improved NSGA-II algorithm
by Rumin Teng & Jifei Liang & Guanglei Wu & Dianlong Wang & Xin Wang - 990-1001 An adaptive particle swarm optimization method for multi-objective system reliability optimization
by Mohamed Arezki Mellal & Enrico Zio - 1002-1013 Dynamic reliability analysis for structure with temporal and spatial multi-parameter
by Yan Shi & Zhenzhou Lu - 1014-1028 A rolling horizon approach for production planning and condition-based maintenance under uncertain demand
by Lin Wang & Zhiqiang Lu & Yifei Ren - 1029-1039 k-barrier coverage reliability evaluation for wireless sensor networks using two-dimensional k-within-consecutive-r × s-out-of-m × n:F system
by Qiang Liu - 1040-1059 Multi-mission selective maintenance modelling for multistate systems over a finite time horizon
by Xiaosheng Zhang & Jianqiao Chen & Ben Han & Junxiang Li - 1060-1073 Reliability analysis of high-speed railway network
by Shuang Gu & Keping Li - 1074-1085 Time-dependent reliability analysis of wind turbines considering load-sharing using fault tree analysis and Markov chains
by Yao Li & Frank PA Coolen - 1086-1098 Inverse Gaussian–based model with measurement errors for degradation analysis
by Xudan Chen & Guoxun Ji & Xinli Sun & Zhen Li - 1099-1105 An adaptive cuckoo optimization algorithm for system design optimization under failure dependencies
by Mohamed Arezki Mellal & Enrico Zio - 1106-1121 Dynamic reliability evaluation of vehicle–track coupled systems considering the randomness of suspension and wheel–rail parameters
by Yahui Zhang & Wei Wang & Huajiang Ouyang
October 2019, Volume 233, Issue 5
- 719-730 Gear pitting fault diagnosis using disentangled features from unsupervised deep learning
by Yongzhi Qu & Yue Zhang & Miao He & David He & Chen Jiao & Zude Zhou - 731-746 A stochastic process for modeling failures of a system having a non-monotonic hazard rate function
by Lucianne Varn & Stefanka Chukova & Richard Arnold - 747-760 Reliability modeling for a discrete time multi-state system with random and dependent transition probabilities
by Linmin Hu & Rui Peng - 761-774 Analyzing uncertainties in model response using the point estimate method: Applications from railway asset management
by Thorsten Neumann & Beate Dutschk & René Schenkendorf - 775-790 A penalty-guided fractal search algorithm for reliability–redundancy allocation problems with cold-standby strategy
by Mohammad N Juybari & Mostafa Abouei Ardakan & Hamed Davari-Ardakani - 791-802 Optimal allocation of test times for reliability growth testing with interval-valued model parameters
by Wei Wang & Yaofeng Xu & Liguo Hou - 803-814 Probabilistic model of degradation of cable insulations in nuclear power plants
by Yuan-Shang Chang & Ali Mosleh - 815-825 Optimization design of aeronautical hydraulic pipeline system based on non-probabilistic sensitivity analysis
by Zheng Zhang & Changcong Zhou & Wenxuan Wang & Zhufeng Yue - 826-846 Correlated reliability and an application: Propulsive landing on Mars
by Hüseyin Sarper - 847-856 Test based safety-critical software reliability estimation using Bayesian method and flow network structure
by Yaguang Yang - 857-867 Optimal design of an electrical connector intermittent fault–accelerated reproduction test based on a genetic algorithm
by Zunqing Zhu & Qian Li & Yong Zhang & Guanjun Liu & Jing Qiu & Kehong Lyu - 868-880 Complementary ensemble local means decomposition method and its application to rolling element bearings fault diagnosis
by Yao Cheng & Dong Zou - 881-897 Multiobjective optimization of reliability–redundancy allocation problems for serial parallel-series systems based on importance measure
by Jiangbin Zhao & Shubin Si & Zhiqiang Cai & Ming Su & Wei Wang - 898-907 Reliability and maintenance modeling for competing failures with intermission considered
by Jingyi Liu & Yugang Zhang & Bifeng Song - 908-922 Methods for fault diagnosis of high-speed railways: A review
by Yu Zang & Wei Shangguan & Baigen Cai & Huashen Wang & Michael G Pecht
August 2019, Volume 233, Issue 4
- 505-519 Extending the survival signature paradigm to complex systems with non-repairable dependent failures
by Hindolo George-Williams & Geng Feng & Frank PA Coolen & Michael Beer & Edoardo Patelli - 520-536 Combining system-theoretic process analysis and availability assessment: A subsea case study
by Juntao Zhang & Hyungju Kim & Yiliu Liu & Mary Ann Lundteigen - 537-552 Sensor selection for fault diagnostics using performance metric
by J Reeves & R Remenyte-Prescott & J Andrews - 553-566 Preventive maintenance optimization for repairable products considering two-dimensional warranty and customer satisfaction
by Yukun Wang & Yiliu Liu & Aibo Zhang - 567-579 An importance order analysis method for causes of railway signaling system hazards based on complex networks
by Jintao Liu & Keping Li & Wei Zheng & Jiebei Zhu - 580-592 Reliability of demand-based warm standby system with common bus performance sharing
by Heping Jia & Rui Peng & Yi Ding & Yonghua Song - 593-604 Reliability-based covariate analysis for complex systems in heterogeneous environment: Case study of mining equipment
by Amin Moniri-Morad & Mohammad Pourgol-Mohammad & Hamid Aghababaei & Javad Sattarvand - 605-614 Sample selection of prognostics validation test based on multi-stage Wiener process
by Zhiao Zhao & Yong Zhang & Guanjun Liu & Jing Qiu - 615-622 Bayesian information fusion for degradation analysis of deteriorating products with individual heterogeneity
by Junyu Guo & Hong-Zhong Huang & Weiwen Peng & Jie Zhou - 623-638 Joint optimization of components redundancy, spares inventory and repairmen allocation for a standby series system
by Xian Zhao & Jing Zhang & Xiaoyue Wang - 639-647 Reliability of cable insulation under reaction- and diffusion-controlled thermal degradation
by Yuan-Shang Chang & Ali Mosleh - 648-657 Two-dimensional preventive maintenance optimum for equipment sold with availability-based warranty
by Chun Su & Longfei Cheng - 658-669 Redundancy allocation problem in a bridge system with dependent subsystems
by Kamyar Sabri-Laghaie & Milad Eshkevari & Mahdi Fathi & Enrico Zio - 670-681 A bivariate replacement policy for an imperfect repair system based on geometric processes
by Qinglai Dong & Lirong Cui & Hongda Gao - 682-697 Sustainable production process: An application of reliability, availability, and maintainability methodologies in automotive manufacturing
by Hamzeh Soltanali & A.H.S Garmabaki & Adithya Thaduri & Aditya Parida & Uday Kumar & Abbas Rohani - 698-715 Warranty cost analysis with an alternating geometric process
by Richard Arnold & Stefanka Chukova & Yu Hayakawa & Sarah Marshall
June 2019, Volume 233, Issue 3
- 303-316 Wind turbine planetary gearbox feature extraction and fault diagnosis using a deep-learning-based approach
by Miao He & David He & Jae Yoon & Thomas J Nostrand & Junda Zhu & Eric Bechhoefer - 317-327 Research on intermittent failure re-presentation of electrical connector based on accelerated test
by Qian Li & Kehong Lyu & Jing Qiu & Guanjun Liu - 328-337 A linear m-consecutive-k-out-of-n system with sparse d of non-homogeneous Markov-dependent components
by Xiaoyan Zhu & Mahmoud Boushaba & Abdelmoumene Boulahia & Xian Zhao - 338-354 A vine copula–based method for analyzing the moment-independent importance measure of the multivariate output
by Yicheng Zhou & Zhenzhou Lu & Yan Shi & Kai Cheng - 355-368 A two-stage Markov model–aided frequency-duration technique for reliability analysis of phasor measurement unit microwave communication networks
by Bhargav Appasani & Dusmanta Kumar Mohanta - 369-378 A model based on hidden graphic evaluation and review technique network to evaluate reliability and lifetime of multi-state systems
by Wenjie Dong & Sifeng Liu & Zhigeng Fang & Yingsai Cao & Ye Ding - 379-400 Selective maintenance optimization for random phased-mission systems subject to random common cause failures
by Xisheng Jia & Wenbin Cao & Qiwei Hu - 401-418 The copula-based method for statistical analysis of step-stress accelerated life test with dependent competing failure modes
by Yicheng Zhou & Zhenzhou Lu & Yan Shi & Kai Cheng - 419-426 On operation termination for degrading systems with two types of failures
by Maxim Finkelstein & Gregory Levitin & Oleg A Stepanov - 427-443 Selective maintenance optimisation considering random common cause failures and imperfect maintenance
by Wenbin Cao & Xisheng Jia & Yu Liu & Qiwei Hu & Jianmin Zhao - 444-454 Improving operational reliability of manufacturing systems by process optimization via survival signatures
by Liling Ge & Yingjie Zhang - 455-469 Operation-oriented reliability and availability evaluation for onboard high-speed train control system with dynamic Bayesian network
by Lei Jiang & Yiliu Liu & Xiaomin Wang & Mary Ann Lundteigen - 470-486 Survey assessment of organizational resiliency potential of a group of Seveso organizations in Turkey
by Hatice Şengül & Dilem Marşan & Tuğçe Gün - 487-502 A sparse surrogate model for structural reliability analysis based on the generalized polynomial chaos expansion
by Qian Liu & Xufang Zhang & Xianzhen Huang
April 2019, Volume 233, Issue 2
- 89-104 Maintenance strategy selection for multi-component systems using a combined analytic network process and cost-risk criticality model
by Mahmood Shafiee & Ashraf Labib & Jhareswar Maiti & Andrew Starr - 105-117 Selection of time-to-failure model for computerized numerical control turning center based on the assessment of trends in maintenance data
by Rajkumar Bhimgonda Patil & Basavraj S Kothavale & Laxman Yadu Waghmode - 118-138 Risk analysis in low-voltage distribution systems
by Mostafa Aliyari & Yonas Z Ayele & Abbas Barabadi & Enrique Lopez Droguett - 139-150 Combination of line sampling and important sampling for reliability assessment of buried pipelines
by Kong Fah Tee & Andrew Utomi Ebenuwa - 151-174 A new safety and security risk analysis framework for industrial control systems
by Siwar Kriaa & Marc Bouissou & Youssef Laarouchi - 175-185 Operation reliability evaluation of cutting tools based on singular value decomposition transform and support vector space
by Baojia Chen & Baoming Shen & Fajun Zhang & Wenrong Xiao & Fafa Chen & Hongliang Tian & Shu Chen - 186-199 Quantitative metrics to analyze supply chain resilience and associated costs
by Araceli Zavala & David Nowicki & Jose Emmanuel Ramirez-Marquez - 200-210 Availability and maintenance modeling for a two-component system with dependent failures over a finite time horizon
by Qingan Qiu & Lirong Cui & Dejing Kong - 211-225 A segmental evaluation model for determining residual rail service life based on a discrete-state conditional probabilistic method
by Wenfei Bai & Quanxin Sun & Futian Wang & Rengkui Liu & Ru An - 226-234 Reliability assessment of the spindle systems with a competing risk model
by Zhaojun Yang & Xiaoxu Li & Chuanhai Chen & Hongxun Zhao & Dingyu Yang & Jinyan Guo & Wei Luo - 235-245 Fault diagnostic strategy of multivalued attribute system based on growing algorithm
by Heng Tian & Fuhai Duan & Liang Fan & Yong Sang - 246-256 Modeling and analysis of software fault detectability and removability with time variant fault exposure ratio, fault removal efficiency, and change point
by Subhashis Chatterjee & Ankur Shukla & Hoang Pham - 257-267 On some characteristics of quality for systems operating in a random environment
by Ji Hwan Cha & Maxim Finkelstein - 268-284 Influence of respondent type on relationships between safety climate and safety performance in manufacturing firm
by Vedant Singh & Anita Verma - 285-300 Optimizing maintenance decisions in railway wheelsets: A Markov decision process approach
by Joaquim AP Braga & António R Andrade
February 2019, Volume 233, Issue 1
- 3-4 Editorial
by Di Zhang & Jin Wang - 5-17 Voyage optimization for mitigating ship structural failure due to crack propagation
by Helong Wang & Wengang Mao & Di Zhang - 18-34 Toward a hybrid model of ship performance in ice suitable for route planning purpose
by Jakub Montewka & Floris Goerlandt & Mikko Lensu & Lauri Kuuliala & Robert Guinness - 35-47 Ship accident consequences and contributing factors analyses using ship accident investigation reports
by Liye Zhang & Hua Wang & Qiang Meng & Hongbin Xie - 48-57 Mining of inland water traffic accident data using a biclustering algorithm: A case study of the Yangtze River
by Chen Chen & Qing Wu & Song Gao - 58-70 The role of ship inspections in maritime accidents: An analysis of risk using the bow-tie approach
by Panagiotis Sotiralis & Konstantinos Louzis & Nikolaos P Ventikos - 71-83 The efficiency improvement of port state control based on ship accident Bayesian networks
by Lixian Fan & Zimeng Zhang & Jingbo Yin & Xingyuan Wang - 84-85 Reviewers List
by N/A
December 2018, Volume 232, Issue 6
- 535-558 Basis for non-propagation domains, their transformations and their impact on software reliability
by Chetan Mutha & Carol Smidts - 559-575 Production performance analysis during operation phase: A case study
by Ali N Qarahasanlou & Abbas Barabadi & Yonas Z Ayele - 576-586 An availability-based warranty policy considering preventive maintenance and learning effects
by Chun Su & Longfei Cheng - 587-597 Online remaining useful life prognostics using an integrated particle filter
by Yawei Hu & Shujie Liu & Huitian Lu & Hongchao Zhang - 598-606 Fatigue life prediction of wind turbine rotor blade composites considering the combined effects of stress amplitude and mean stress
by Jianxiong Gao & Zongwen An & Haixia Kou - 607-615 Optimal mission abort policy with multiple shock number thresholds
by Gregory Levitin & Maxim Finkelstein - 616-626 Community detection and resilience in multi-source, multi-terminal networks
by Claudio M Rocco & Kash Barker & Jose Moronta & Jose E Ramirez-Marquez - 627-634 Reliability sensitivity analysis of coherent systems based on survival signature
by Xianzhen Huang & Frank PA Coolen - 635-646 Lifetime estimation of nitrile butadiene rubber O-rings under storage conditions using time-varying copula
by Jun Pan & Guanghan Bai & Wenhua Chen - 647-660 Reliability of nonrepairable phased-mission systems with common bus performance sharing
by Huan Yu & Jun Yang & Yu Zhao - 661-676 Multi-objective optimization for safety and reliability trade-off: Optimization and results processing
by Cristina Johansson & Johan Ölvander & Micael Derelöv - 677-689 A Markov decision process framework for optimal operation of monitored multi-state systems
by Michele Compare & Paolo Marelli & Piero Baraldi & Enrico Zio - 690-709 Predictive airframe maintenance strategies using model-based prognostics
by Yiwei Wang & Christian Gogu & Nicolas Binaud & Christian Bes & Raphael T Haftka & Nam-Ho Kim - 710-724 Decision-making of investment in navigation safety improving schemes with application of cumulative prospect theory
by Lei Wang & Qing Liu & Tongle Yin - 725-737 Simulation-based uncertainty correlation modeling in reliability analysis
by Faramarz Khosravi & Malte Müller & Michael Glaß & Jürgen Teich - 738-753 A recursive Bayesian approach to small fatigue crack propagation and detection modeling
by Reuel Smith & Mohammad Modarres & Enrique López Droguett - 754-765 Reliability modeling for systems degrading in K cyclical regimes based on gamma processes
by Jingyuan Shen & Alaa Elwany & Lirong Cui - 766-776 An optimal inspection and replacement policy for a two-unit system
by Li Yang & Yu Zhao & Xiaobing Ma & Qingan Qiu - 777-785 Optimal control of production with improvement
by Nobuyuki Tamura
October 2018, Volume 232, Issue 5
- 475-475 Special Issue Editorial
by N/A - 476-490 Towards real-time human participation in virtual evacuation through a validated simulation tool
by Gabriele Montecchiari & Gabriele Bulian & Paolo Gallina - 491-504 Impact of cyber dependencies in critical infrastructures: The reliability of grid splitting in power systems
by Di-An Tian & Giovanni Sansavini - 505-523 Generic Bayesian network models for making maintenance decisions from available data and expert knowledge
by Haoyuan Zhang & D William R Marsh - 524-532 On modeling insights for emerging engineering problems: A case study on the impact of climate uncertainty on the operational performance of offshore wind farms
by Iain Dinwoodie & David McMillan & Iraklis Lazakis & Yalcin Dalgic & Matthew Revie
August 2018, Volume 232, Issue 4
- 337-339 Editorial: August Special Issue on Advanced Maintenance Engineering, Services, and Technology (AMEST)
by Christos Emmanouilidis & Benoit Iung & Marco Macchi & Francois Peres - 340-351 Object-oriented Bayesian network for complex system risk assessment
by Quan Liu & Ayeley Tchangani & François Pérès & Vicente Gonzalez-Prida - 352-367 After-sales services optimisation through dynamic opportunistic maintenance: a wind energy case study
by Asier Erguido & Adolfo Crespo & Eduardo Castellano & Jose Luis Flores - 368-378 A framework to embed Asset Management in production companies
by Irene Roda & Marco Macchi - 379-388 Energy efficiency for condition-based maintenance decision-making: Application to a manufacturing platform
by Phuc Do & Anh Hoang & Benoit Iung & Hai-Canh Vu - 389-400 A social network of collaborating industrial assets
by Hao Li & Adrià Salvador Palau & Ajith Kumar Parlikad - 401-414 An artificial immune intelligent maintenance system for distributed industrial environments
by Luca Fasanotti & Sergio Cavalieri & Emanuele Dovere & Paolo Gaiardelli & Carlos E Pereira - 415-424 Proton exchange membrane fuel cell remaining useful life prognostics considering degradation recovery phenomena
by Dacheng Zhang & Catherine Cadet & Nadia Yousfi-Steiner & Christophe Bérenguer - 425-434 Wear rate–state interactions within a multi-component system: a study of a gearbox-accelerated life testing platform
by Roy Assaf & Phuc Do & Samia Nefti-Meziani & Philip Scarf - 435-446 Excitation-invariant pre-processing of thermographic data
by Serafeim Moustakidis & Athanasios Anagnostis & Apostolos Chondronasios & Patrik Karlsson & Kostas Hrissagis - 447-463 Condition-based selective maintenance for stochastically degrading multi-component systems under periodic inspection and imperfect maintenance
by Abdelhakim Khatab & Claver Diallo & El-Houssaine Aghezzaf & Uday Venkatadri - 464-472 Criticality analysis for preventive maintenance optimization purposes in gas network infrastructures
by Javier Serra Parajes & Adolfo Crespo Márquez & Antonio Sola Rosique
June 2018, Volume 232, Issue 3
- 227-247 A methodology for model-based verification of safety contracts and performance requirements
by Elena Gómez-MartÃnez & Ricardo J RodrÃguez & Clara Benac-Earle & Leire Etxeberria & Miren Illarramendi - 248-261 Cost-oriented component redundancy allocation for a communication system subject to correlated failures and a transmission reliability threshold
by Cheng-Ta Yeh & Lance Fiondella & Ping-Chen Chang - 262-273 A zero-failure accelerated degradation test under ramp–soak–stress loading
by Preeti Wanti Srivastava & Manisha - 274-283 Warranty analysis of a two-component system with type I stochastic dependence
by Nan Zhang & Mitra Fouladirad & Anne Barros - 284-307 Two-dimensional warranty: A literature review
by Xiaolin Wang & Wei Xie - 308-319 The negative log-gamma prior distribution for Bayesian assessment of system reliability
by Roger Zoh & Alyson Wilson & Scott Vander Wiel & Earl Lawrence - 320-334 Formal reliability analysis of oil and gas pipelines
by Waqar Ahmad & Osman Hasan & Sofiène Tahar & Mohamed Salah Hamdi
April 2018, Volume 232, Issue 2
- 121-139 Adequacy and security analysis of interdependent electric and gas networks
by Andrea Antenucci & Giovanni Sansavini - 140-150 A clustering approach for mining reliability big data for asset management
by Francesco Cannarile & Michele Compare & Francesco Di Maio & Enrico Zio - 151-163 The case for IT transformation and big data for safety risk management on the GB railways
by Coen van Gulijk & Peter Hughes & Miguel Figueres-Esteban & Rawia El-Rashidy & George Bearfield - 164-173 A project management issue of new technology developments: A case study on lack of human factors’ attention in human–robot interaction
by Knut R Fossum & Brit-Eli Danielsen & Wenche Aarseth & Stig Ole Johnsen - 174-184 Realistic modelling of flexibility and dependence in production systems in Industry 4.0 for analysing their productivity and availability
by Fei Long & Peter Zeiler & Bernd Bertsche - 185-200 Ensembles of climate change models for risk assessment of nuclear power plants
by Matteo Vagnoli & Francesco Di Maio & Enrico Zio - 201-215 Graphs models and algorithms for reliability assessment of coherent and non-coherent systems
by Nicolae Brînzei & Jean-François Aubry - 216-224 Modeling an electric power microgrid by model predictive control for analyzing its characteristics from reliability, controllability and topological perspectives
by Fangyuan Han & Enrico Zio
February 2018, Volume 232, Issue 1
- 3-37 Developing the foundations of a cognition-based human reliability analysis model via mapping task types and performance-influencing factors: Application to radiotherapy
by Dhruv Pandya & Luca Podofillini & Frank Emert & Antony J Lomax & Vinh N Dang - 38-51 K-mixed strategy: A new redundancy strategy for reliability problems
by Abdossaber Peiravi & Mahdi Karbasian & Mostafa Abouei Ardakan - 52-64 Hybrid reliability-based multidisciplinary design optimization with random and interval variables
by Fan Yang & Zhufeng Yue & Lei Li & Dong Guan - 65-81 Sensor placement determination in system health monitoring process based on dual information risk and uncertainty criteria
by Farzin Salehpour-Oskouei & Mohammad Pourgol-Mohammad - 82-91 Optimal mission duration for systems subject to shocks and internal failures
by Maxim Finkelstein & Gregory Levitin - 92-104 Integration of scheduled structural health monitoring with airline maintenance program based on risk analysis
by Jianzhong Sun & Dan Chen & Chaoyi Li & Hongsheng Yan - 105-115 Methods for displaying and calibration of Cox proportional hazards models
by Chrianna I Bharat & Kevin Murray & Edward Cripps & Melinda R Hodkiewicz - 116-117 Reviewer List 2017
by N/A
December 2017, Volume 231, Issue 6
- 617-627 On innovative stochastic renewal process models for exact unavailability quantification of highly reliable systems
by Radim Briš & Petr Byczanski - 628-642 An efficient variable ordering heuristic for binary decision diagram–based reliability analysis of network with imperfect nodes
by Zhusheng Pan & Liudong Xing & Yuchang Mo & Wenbai Li - 643-653 Bivariate preventive maintenance for repairable systems subject to random shocks
by Ji Hwan Cha & Maxim Finkelstein & Gregory Levitin - 654-665 Statistical inference for masked interval data with Weibull distribution under simple step-stress test and tampered failure rate model
by Fariba Azizi & Firoozeh Haghighi & Elahe Ghadiri & Leila Torabi - 666-679 Rolling bearing fault severity identification using deep sparse auto-encoder network with noise added sample expansion
by Renxiang Chen & Siyang Chen & Miao He & David He & Baoping Tang - 680-690 A methodology for assessing the reliability and security of cascade reservoir systems
by Ying Tian & Qingwen Ren & Yin Yang & Yao Xiong - 691-700 AltaRica 3.0 assertions: The whys and wherefores
by Michel Batteux & Tatiana Prosvirnova & Antoine Rauzy - 701-715 Mission reliability modeling for multi-station manufacturing system based on Quality State Task Network
by Yihai He & Changchao Gu & Xiao Han & Jiaming Cui & Zhaoxiang Chen - 716-731 Impact of health indicators on maintenance management and operation of power systems
by Peyman Mazidi & Miguel A Sanz Bobi & Ebrahim Shayesteh & Patrik Hilber - 732-749 The fatigue behavior and fatigue reliability analysis of vibroseis baseplates based on fracture mechanics
by Zhen Chen & Zhiqiang Huang & Shuang Jing & Zhifei Tao & Qi Zhao - 750-760 1-out-of-N multi-state standby systems with state-dependent random replacement times
by Gregory Levitin & Heping Jia & Yi Ding & Yonghua Song
October 2017, Volume 231, Issue 5
- 467-468 The flaws of the ISO 31000 conceptualisation of risk
by Terje Aven - 469-480 Remaining useful life prediction for non-stationary degradation processes with shocks
by Xiaojie Ke & Zhengguo Xu & Wenhai Wang & Youxian Sun - 481-494 A health condition model for wind turbine monitoring through neural networks and proportional hazard models
by Peyman Mazidi & Mian Du & Lina Bertling Tjernberg & Miguel A Sanz Bobi - 495-507 Optimizing the re-profiling policy regarding metropolitan train wheels based on a semi-Markov decision process
by Zengqiang Jiang & Dragan Banjevic & Mingcheng E & Bing Li - 508-515 A convex model approach for structure non-probabilistic reliability analysis
by Zhengmao Yang & Yanjuan Zhang & Wenjun Meng & Jianghui Cai - 516-533 A dynamic Bayesian network approach for prognosis computations on discrete state systems
by Josquin Foulliaron & Laurent Bouillaut & Patrice Aknin & Anne Barros - 534-545 Optimizing preventive maintenance policy: A data-driven application for a light rail braking system
by Francesco Corman & Sander Kraijema & Milinko Godjevac & Gabriel Lodewijks - 546-557 Analytical failure probability model for generic gravity dam classes
by Mohammad Amin Hariri-Ardebili - 558-572 Benefit and customer demand approach for maintenance optimization of complex systems using Bayesian networks
by El Hassene Ait Mokhtar & Radouane Laggoune & Alaa Chateauneuf - 573-586 Extending first-passage method to reliability sensitivity analysis of motion mechanisms
by Wenxuan Wang & Hangshan Gao & Pengfei Wei & Changcong Zhou - 587-604 Reliability optimization for non-repairable series-parallel systems with a choice of redundancy strategies: Erlang time-to-failure distribution
by Meisam Sadeghi & Emad Roghanian - 605-614 Practical lifetime estimation strategy based on partially step-stress-accelerated degradation tests
by Yong Soo Kim & Si-Il Sung
August 2017, Volume 231, Issue 4
- 337-338 Editorial: Special Issue of ESREL 2015
by Luca Podofillini & Bruno Sudret & Božidar Stojadinović & Enrico Zio & Wolfgang Kröger - 339-349 Joint maintenance and controller reconfiguration policy for a gradually deteriorating control system
by Yves Langeron & Antoine Grall & Anne Barros - 350-363 A locally adaptive ensemble approach for data-driven prognostics of heterogeneous fleets
by Sameer Al-Dahidi & Francesco Di Maio & Piero Baraldi & Enrico Zio - 364-372 Modelling weather dependence in online reliability assessment of power systems
by Samuel Perkin & Arne Brufladt Svendsen & Trond Tollefsen & Ingrid Honve & Iris Baldursdottir & Hlynur Stefansson & Ragnar Kristjansson & Pall Jensson - 373-382 Analytical formulas of PFD and PFH calculation for systems with nonconstant failure rates
by Elena Rogova & Gabriel Lodewijks & Mary Ann Lundteigen - 383-389 Hazard/threat identification: Using functional resonance analysis method in conjunction with the Anticipatory Failure Determination method
by Anders Jensen & Terje Aven - 390-399 Formulation of reliability-related objective functions for design of intelligent mechatronic systems
by Thorben Kaul & Tobias Meyer & Walter Sextro - 400-410 Missing focus on Human Factors – organizational and cognitive ergonomics – in the safety management for the petroleum industry
by Stig O Johnsen & Stine Skaufel Kilskar & Knut Robert Fossum - 411-428 Delayed maintenance modelling considering speed restriction for a railway section
by Hui Shang & Christophe Bérenguer & John Andrews - 429-445 Modelling and numerical assessment of a maintenance strategy with stock through piecewise deterministic Markov processes and quasi Monte Carlo methods
by Jeanne Demgne & Sophie Mercier & William Lair & Jérôme Lonchampt - 446-464 A risk model for autonomous marine systems and operation focusing on human–autonomy collaboration
by Christoph Alexander Thieme & Ingrid Bouwer Utne
June 2017, Volume 231, Issue 3
- 209-220 Common cause failure model updating for risk monitoring in nuclear power plants based on alpha factor model
by Min Zhang & Zhijian Zhang & Ali Mosleh & Sijuan Chen - 221-231 Algorithm to prioritize the restoration of a multiple facility, multiple-hazard road network
by Veeresh Varad Basavaraj & Venkateswaran Shekar & Lance Fiondella & Ashrafur Rahman & Nicholas Lownes - 232-241 A study on a single-unit repairable system with working and repair time omission under an alternative renewal process
by Quan Zhang & Lirong Cui & He Yi - 242-254 Aggregation of importance measures for decision making in reliability engineering
by Michele Compare & Michele Bellora & Enrico Zio - 255-264 Dynamic performance evaluation of multi – state systems under non – homogeneous continuous time Markov process degradation using lifetimes in terms of order statistics
by Funda Iscioglu - 265-274 Surrogate-model-based reliability method for structural systems with dependent truncated random variables
by Ning-Cong Xiao & Libin Duan & Zhangchun Tang - 275-285 Maximizing safety margins in task-based design of redundant manipulators for cluttered environments
by E. Singla & S. Singh & B. Dasgupta - 286-294 How the definition of security risk can be made compatible with safety definitions
by Øystein Amundrud & Terje Aven & Roger Flage - 295-305 Improving the foundation and practice of reliability engineering
by Terje Aven - 306-323 A Petri net model for railway bridge maintenance
by Bryant Le & John Andrews & Claudia Fecarotti - 324-333 A simplified reliability analysis method for cloud computing systems considering common-cause failures
by Ruiying Li & Qiong Li & Ning Huang & Rui Kang
April 2017, Volume 231, Issue 2
- 83-90 Statistical dependency analysis of multiple competing failure causes of fuel cell engines
by Tie Chen & Songlin Zheng & Jinzhi Feng - 91-100 On the meaning of accuracy and precision in a risk analysis context
by Jon T Selvik & Eirik B Abrahamsen - 101-108 Preventive maintenance for systems with repairable minor failures
by Maxim Finkelstein & Mahmood Shafiee - 109-120 An approximation method for evaluating the reliability of a dynamic k-out-of-n:F system subjected to cyclic alternating operation conditions
by Cong Lin & Lirong Cui & David Coit & Min Lv - 121-129 Wind turbine prognostics and maintenance management based on a hybrid approach of neural networks and a proportional hazards model
by Peyman Mazidi & Lina Bertling Tjernberg & Miguel A Sanz Bobi - 130-137 A new method for obtaining P-S-N curves under the condition of small sample
by Jianxiong Gao & Zongwen An & Bo Liu - 138-145 A cellular automaton model for offshore evacuation risk assessment
by Michel Grand Blanc & Andrea Carpignano & Sandra Dulla & Stefano Marolo - 146-154 Reliability and sensitivity analysis for a banking company transmission system
by Yi-Kuei Lin & Hsien-Chang Chou & Ping-Chen Chang