IDEAS home Printed from https://ideas.repec.org/a/sae/risrel/v234y2020i2p322-332.html
   My bibliography  Save this article

Proportional hazard model for cutting tool recovery in machining

Author

Listed:
  • Abdoulaye Diamoutene
  • Farid Noureddine
  • Rachid Noureddine
  • Bernard Kamsu-Foguem
  • Diakarya Barro

Abstract

The proportional hazard model is a statistical method capable of including information on environmental and operating conditions. In machining, in the reliability field of a cutting tool, the interest of using proportional hazard model is highlighted. On one hand, the environmental and operating conditions are described and taken into account as explanatory variables. Three covariates are considered, namely, the vibration signal, the hardness material, and the lubrication/cooling. On the other hand, a new baseline hazard function is designed according to phenomena of tiny tool breakage followed by a self-sharpening process. This latter phenomenon, which can be considered as a rare event, prompted us to study extreme value theory to propose an adequate baseline hazard function. The newly obtained baseline hazard function will be named generalized extreme value proportional hazard model. This function is obtained thanks to the Gumbel function and has the property to be non-monotonic, an increasing then decreasing function. An alternative option as a baseline hazard function, based on the flexible Weibull distributions, is also proposed. Results produced in this article show the impact of all these variables on the surface roughness of the machined parts. According to reliability studies, the premature replacement of the cutting tool implying financial losses can be delayed. This may be of particular significance and benefit, in terms of sustainable development, in the case of mass production, by limiting the frequency of tool replacement.

Suggested Citation

  • Abdoulaye Diamoutene & Farid Noureddine & Rachid Noureddine & Bernard Kamsu-Foguem & Diakarya Barro, 2020. "Proportional hazard model for cutting tool recovery in machining," Journal of Risk and Reliability, , vol. 234(2), pages 322-332, April.
    • Handle: RePEc:sae:risrel:v:234:y:2020:i:2:p:322-332
    DOI: 10.1177/1748006X19884211
    as

    Download full text from publisher

    File URL: https://journals.sagepub.com/doi/10.1177/1748006X19884211
    Download Restriction: no
    File URL: https://libkey.io/10.1177/1748006X19884211?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Diamoutene, Abdoulaye & Kamsu-Foguem, Bernard & Noureddine, Farid & Barro, Diakarya, 2018. "Prediction of U.S. General Aviation fatalities from extreme value approach," Transportation Research Part A: Policy and Practice, Elsevier, vol. 109(C), pages 65-75.
    2. Sangun Park & Jiwhan Park, 2018. "A general class of flexible Weibull distributions," Communications in Statistics - Theory and Methods, Taylor & Francis Journals, vol. 47(4), pages 767-778, February.
    3. Almalki, Saad J. & Yuan, Jingsong, 2013. "A new modified Weibull distribution," Reliability Engineering and System Safety, Elsevier, vol. 111(C), pages 164-170.
    4. Bobrowski, Sebastian & Chen, Hong & Döring, Maik & Jensen, Uwe & Schinköthe, Wolfgang, 2015. "Estimation of the lifetime distribution of mechatronic systems in the presence of a covariate: A comparison among parametric, semiparametric and nonparametric models," Reliability Engineering and System Safety, Elsevier, vol. 139(C), pages 105-112.
    5. Almalki, Saad J. & Nadarajah, Saralees, 2014. "Modifications of the Weibull distribution: A review," Reliability Engineering and System Safety, Elsevier, vol. 124(C), pages 32-55.
    6. Vikas Upadhyay & P.K. Jain & N.K. Mehta, 2013. "Prediction of surface roughness using cutting parameters and vibration signals in minimum quantity coolant assisted turning of Ti-6Al-4V alloy," International Journal of Manufacturing Technology and Management, Inderscience Enterprises Ltd, vol. 27(1/2/3), pages 33-46.
    7. Barker, Kash & Baroud, Hiba, 2014. "Proportional hazards models of infrastructure system recovery," Reliability Engineering and System Safety, Elsevier, vol. 124(C), pages 201-206.
    8. Zio, Enrico, 2016. "Challenges in the vulnerability and risk analysis of critical infrastructures," Reliability Engineering and System Safety, Elsevier, vol. 152(C), pages 137-150.
    9. Patiño Rodriguez, Carmen Elena & Francisco Martha de Souza, Gilberto, 2010. "Reliability concepts applied to cutting tool change time," Reliability Engineering and System Safety, Elsevier, vol. 95(8), pages 866-873.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. XiaoFei, Lu & Min, Liu, 2014. "Hazard rate function in dynamic environment," Reliability Engineering and System Safety, Elsevier, vol. 130(C), pages 50-60.
    2. Musleh, Rola M. & Helu, Amal, 2014. "Estimation of the inverse Weibull distribution based on progressively censored data: Comparative study," Reliability Engineering and System Safety, Elsevier, vol. 131(C), pages 216-227.
    3. Zeng, Hongtao & Lan, Tian & Chen, Qiming, 2016. "Five and four-parameter lifetime distributions for bathtub-shaped failure rate using Perks mortality equation," Reliability Engineering and System Safety, Elsevier, vol. 152(C), pages 307-315.
    4. He, Bo & Cui, Weimin & Du, Xiaofeng, 2016. "An additive modified Weibull distribution," Reliability Engineering and System Safety, Elsevier, vol. 145(C), pages 28-37.
    5. Filippo Domma & Francesca Condino & Božidar V. Popović, 2017. "A new generalized weighted Weibull distribution with decreasing, increasing, upside-down bathtub, N-shape and M-shape hazard rate," Journal of Applied Statistics, Taylor & Francis Journals, vol. 44(16), pages 2978-2993, December.
    6. Rajkumar Bhimgonda Patil & Basavraj S Kothavale & Laxman Yadu Waghmode, 2019. "Selection of time-to-failure model for computerized numerical control turning center based on the assessment of trends in maintenance data," Journal of Risk and Reliability, , vol. 233(2), pages 105-117, April.
    7. Mohammad Mojtahedi & Sidney Newton & Jason Meding, 2017. "Predicting the resilience of transport infrastructure to a natural disaster using Cox’s proportional hazards regression model," Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, Springer;International Society for the Prevention and Mitigation of Natural Hazards, vol. 85(2), pages 1119-1133, January.
    8. Tang, Daogui & Fang, Yi-Ping & Zio, Enrico, 2023. "Vulnerability analysis of demand-response with renewable energy integration in smart grids to cyber attacks and online detection methods," Reliability Engineering and System Safety, Elsevier, vol. 235(C).
    9. Federico Antonello & Piero Baraldi & Enrico Zio & Luigi Serio, 2022. "A Novel Metric to Evaluate the Association Rules for Identification of Functional Dependencies in Complex Technical Infrastructures," Environment Systems and Decisions, Springer, vol. 42(3), pages 436-449, September.
    10. Ali Nouri Qarahasanlou & Ali Zamani & Abbas Barabadi & Mahdi Mokhberdoran, 2021. "Resilience Assessment: A Performance-Based Importance Measure," Energies, MDPI, vol. 14(22), pages 1-16, November.
    11. Phan, Hieu Chi & Dhar, Ashutosh Sutra & Bui, Nang Duc, 2023. "Reliability assessment of pipelines crossing strike-slip faults considering modeling uncertainties using ANN models," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    12. Zhaoming Yang & Qi Xiang & Yuxuan He & Shiliang Peng & Michael Havbro Faber & Enrico Zio & Lili Zuo & Huai Su & Jinjun Zhang, 2023. "Resilience of Natural Gas Pipeline System: A Review and Outlook," Energies, MDPI, vol. 16(17), pages 1-19, August.
    13. Szymkowiak, Magdalena & Iwińska, Maria, 2016. "Characterizations of Discrete Weibull related distributions," Statistics & Probability Letters, Elsevier, vol. 111(C), pages 41-48.
    14. Wang, Wei & Cammi, Antonio & Di Maio, Francesco & Lorenzi, Stefano & Zio, Enrico, 2018. "A Monte Carlo-based exploration framework for identifying components vulnerable to cyber threats in nuclear power plants," Reliability Engineering and System Safety, Elsevier, vol. 175(C), pages 24-37.
    15. Luciano Cavalcante Siebert & Alexandre Rasi Aoki & Germano Lambert-Torres & Nelson Lambert-de-Andrade & Nikolaos G. Paterakis, 2020. "An Agent-Based Approach for the Planning of Distribution Grids as a Socio-Technical System," Energies, MDPI, vol. 13(18), pages 1-13, September.
    16. Monsalve, Mauricio & de la Llera, Juan Carlos, 2019. "Data-driven estimation of interdependencies and restoration of infrastructure systems," Reliability Engineering and System Safety, Elsevier, vol. 181(C), pages 167-180.
    17. Calabrese, Curtis G. & Molesworth, Brett R.C. & Hatfield, Julie & Slavich, Eve, 2022. "Effects of the Federal Aviation Administration's Compliance Program on aircraft incidents and accidents," Transportation Research Part A: Policy and Practice, Elsevier, vol. 163(C), pages 304-319.
    18. Zio, E., 2018. "The future of risk assessment," Reliability Engineering and System Safety, Elsevier, vol. 177(C), pages 176-190.
    19. Dubaniowski, Mateusz Iwo & Heinimann, Hans Rudolf, 2021. "Framework for modeling interdependencies between households, businesses, and infrastructure system, and their response to disruptions—application," Reliability Engineering and System Safety, Elsevier, vol. 212(C).
    20. Rasool Roozegar & Saralees Nadarajah & Eisa Mahmoudi, 2022. "The Power Series Exponential Power Series Distributions with Applications to Failure Data Sets," Sankhya B: The Indian Journal of Statistics, Springer;Indian Statistical Institute, vol. 84(1), pages 44-78, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:sae:risrel:v:234:y:2020:i:2:p:322-332. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: SAGE Publications (email available below). General contact details of provider: .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.