IDEAS home Printed from https://ideas.repec.org/a/eee/techno/v101y2021ics0166497220300699.html
   My bibliography  Save this article

Sustainability orientation, the adoption of 3D printing technologies, and new product performance: A cross-institutional study of American and Indian firms

Author

Listed:
  • Zhao, Mengli
  • Yang, Jianjun
  • Shu, Chengli
  • Liu, Jinxin

Abstract

Developing new products that can address the triple bottom line of sustainability poses one of the grand challenges in our time. This study is among the first to examine how the adoption of 3D printing (3DP) technologies mediates the impact of firms’ sustainability orientation (SO) on new product performance. We use a mixed-methods design. First, we conduct qualitative interviews in the U.S. and India and find that firms adopt 3DP technologies in two stages: acquisition and application. We then conduct a quantitative study based on large-scale surveys in these two countries and the results show that SO has a stronger positive effect on the acquisition of 3DP technologies in U.S. firms than in Indian ones, but it has a stronger positive effect on the application of 3DP technologies in India than in the U.S. Moreover, the application of 3DP technologies partially mediates the effects of SO on new product performance in Indian firms but not in U.S. firms. This study enriches our understanding of how SO influences new product performance by distinguishing between stages in the adoption of 3DP technologies and shows that the impacts of SO on distinct stages in the adoption process differ between developing and developed countries.

Suggested Citation

  • Zhao, Mengli & Yang, Jianjun & Shu, Chengli & Liu, Jinxin, 2021. "Sustainability orientation, the adoption of 3D printing technologies, and new product performance: A cross-institutional study of American and Indian firms," Technovation, Elsevier, vol. 101(C).
    • Handle: RePEc:eee:techno:v:101:y:2021:i:c:s0166497220300699
    DOI: 10.1016/j.technovation.2020.102197
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0166497220300699
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.technovation.2020.102197?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Isabelle Maignan & David A Ralston, 2002. "Corporate Social Responsibility in Europe and the U.S.: Insights from Businesses' Self-presentations," Journal of International Business Studies, Palgrave Macmillan;Academy of International Business, vol. 33(3), pages 497-514, September.
    2. Tom J. M. Mom & Frans A. J. Van Den Bosch & Henk W. Volberda, 2007. "Investigating Managers' Exploration and Exploitation Activities: The Influence of Top‐Down, Bottom‐Up, and Horizontal Knowledge Inflows," Journal of Management Studies, Wiley Blackwell, vol. 44(6), pages 910-931, September.
    3. Estrin, Saul & Prevezer, Martha, 2011. "The role of informal institutions in corporate governance: Brazil, Russia, India, and China compared," LSE Research Online Documents on Economics 33552, London School of Economics and Political Science, LSE Library.
    4. Michael A. Hitt & Haiyang Li & William J. Worthington IV, 2005. "Emerging Markets as Learning Laboratories: Learning Behaviors of Local Firms and Foreign Entrants in Different Institutional Contexts," Management and Organization Review, International Association of Chinese Management Research, vol. 1(3), pages 353-380, November.
    5. Denise Fischer & Malte Brettel & René Mauer, 2020. "The Three Dimensions of Sustainability: A Delicate Balancing Act for Entrepreneurs Made More Complex by Stakeholder Expectations," Journal of Business Ethics, Springer, vol. 163(1), pages 87-106, April.
    6. Huang, Yu-Ting & Rundle-Thiele, Sharyn, 2014. "The moderating effect of cultural congruence on the internal marketing practice and employee satisfaction relationship: An empirical examination of Australian and Taiwanese born tourism employees," Tourism Management, Elsevier, vol. 42(C), pages 196-206.
    7. Gilsing, V.A. & Duijsters, G.M., 2008. "Understanding novelty creation in exploration networks, structural and relational embeddedness jointly considered," Other publications TiSEM dc09da69-d749-4bf9-8898-5, Tilburg University, School of Economics and Management.
    8. W. E. Douglas Creed & Maureen A. Scully & John R. Austin, 2002. "Clothes Make the Person? The Tailoring of Legitimating Accounts and the Social Construction of Identity," Organization Science, INFORMS, vol. 13(5), pages 475-496, October.
    9. Thakur, Ramendra & Hale, Dena, 2013. "Service innovation: A comparative study of U.S. and Indian service firms," Journal of Business Research, Elsevier, vol. 66(8), pages 1108-1123.
    10. Cooper, Robert G., 1990. "Stage-gate systems: A new tool for managing new products," Business Horizons, Elsevier, vol. 33(3), pages 44-54.
    11. Armstrong, J. Scott & Overton, Terry S., 1977. "Estimating Nonresponse Bias in Mail Surveys," MPRA Paper 81694, University Library of Munich, Germany.
    12. Rooderkerk, Robert P. & Pauwels, Koen H., 2016. "No Comment?! The Drivers of Reactions to Online Posts in Professional Groups," Journal of Interactive Marketing, Elsevier, vol. 35(C), pages 1-15.
    13. Sarv Devaraj & Rajiv Kohli, 2003. "Performance Impacts of Information Technology: Is Actual Usage the Missing Link?," Management Science, INFORMS, vol. 49(3), pages 273-289, March.
    14. Woodson, Thomas & Alcantara, Julia Torres & do Nascimento, Milena Silva, 2019. "Is 3D printing an inclusive innovation?: An examination of 3D printing in Brazil," Technovation, Elsevier, vol. 80, pages 54-62.
    15. Hitt, Michael A. & Li, Haiyang & Worthington, William J., 2005. "Emerging Markets as Learning Laboratories: Learning Behaviors of Local Firms and Foreign Entrants in Different Institutional Contexts," Management and Organization Review, Cambridge University Press, vol. 1(3), pages 353-380, November.
    16. Candi, Marina & Beltagui, Ahmad, 2019. "Effective use of 3D printing in the innovation process," Technovation, Elsevier, vol. 80, pages 63-73.
    17. Schniederjans, Dara G., 2017. "Adoption of 3D-printing technologies in manufacturing: A survey analysis," International Journal of Production Economics, Elsevier, vol. 183(PA), pages 287-298.
    18. Ebers, Mark & Maurer, Indre, 2014. "Connections count: How relational embeddedness and relational empowerment foster absorptive capacity," Research Policy, Elsevier, vol. 43(2), pages 318-332.
    19. Roberto Martin N Galang, 2012. "Government efficiency and international technology adoption: The spread of electronic ticketing among airlines," Journal of International Business Studies, Palgrave Macmillan;Academy of International Business, vol. 43(7), pages 631-654, September.
    20. Joseph Huber, 2004. "New Technologies and Environmental Innovation," Books, Edward Elgar Publishing, number 3400.
    21. Beltagui, Ahmad & Rosli, Ainurul & Candi, Marina, 2020. "Exaptation in a digital innovation ecosystem: The disruptive impacts of 3D printing," Research Policy, Elsevier, vol. 49(1).
    22. Chengli Shu & Kevin Z. Zhou & Yazhen Xiao & Shanxing Gao, 2016. "How Green Management Influences Product Innovation in China: The Role of Institutional Benefits," Journal of Business Ethics, Springer, vol. 133(3), pages 471-485, February.
    23. André O Laplume & Bent Petersen & Joshua M Pearce, 2016. "Global value chains from a 3D printing perspective," Journal of International Business Studies, Palgrave Macmillan;Academy of International Business, vol. 47(5), pages 595-609, June.
    24. Steenkamp, Jan-Benedict E M & Baumgartner, Hans, 1998. "Assessing Measurement Invariance in Cross-National Consumer Research," Journal of Consumer Research, Journal of Consumer Research Inc., vol. 25(1), pages 78-90, June.
    25. Baumers, Martin & Dickens, Phill & Tuck, Chris & Hague, Richard, 2016. "The cost of additive manufacturing: machine productivity, economies of scale and technology-push," Technological Forecasting and Social Change, Elsevier, vol. 102(C), pages 193-201.
    26. Gebler, Malte & Schoot Uiterkamp, Anton J.M. & Visser, Cindy, 2014. "A global sustainability perspective on 3D printing technologies," Energy Policy, Elsevier, vol. 74(C), pages 158-167.
    27. Christopher L. Shook & David J. Ketchen & G. Tomas M. Hult & K. Michele Kacmar, 2004. "An assessment of the use of structural equation modeling in strategic management research," Strategic Management Journal, Wiley Blackwell, vol. 25(4), pages 397-404, April.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wen Liu & Xielin Liu & Ying Liu & Jie Wang & Steve Evans & Miying Yang, 2023. "Unpacking Additive Manufacturing Challenges and Opportunities in Moving towards Sustainability: An Exploratory Study," Sustainability, MDPI, vol. 15(4), pages 1-26, February.
    2. Oduro, Stephen & De Nisco, Alessandro & Mainolfi, Giada, 2023. "Do digital technologies pay off? A meta-analytic review of the digital technologies/firm performance nexus," Technovation, Elsevier, vol. 128(C).
    3. Dhir, Amandeep & Talwar, Shalini & Islam, Nazrul & Alghafes, Rasha & Badghish, Saeed, 2023. "Different strokes for different folks: Comparative analysis of 3D printing in large, medium and small firms," Technovation, Elsevier, vol. 125(C).
    4. Usman Khizar, Hafiz Muhammad & Iqbal, Muhammad Jawad & Khalid, Junaid & Adomako, Samuel, 2022. "Addressing the conceptualization and measurement challenges of sustainability orientation: A systematic review and research agenda," Journal of Business Research, Elsevier, vol. 142(C), pages 718-743.
    5. Hafiz Muhammad Usman Khizar & Muhammad Jawad Iqbal & Muhammad Imran Rasheed, 2021. "Business orientation and sustainable development: A systematic review of sustainability orientation literature and future research avenues," Sustainable Development, John Wiley & Sons, Ltd., vol. 29(5), pages 1001-1017, September.
    6. Ahmadpour, Leila & Leardini, Alberto & Fini, Riccardo & Mascia, Daniele, 2023. "Knowledge sharing in temporary teams: Exploring the use of 3D printing in orthopaedic surgery," Technovation, Elsevier, vol. 123(C).
    7. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    2. Shivam Gupta & Sachin Modgil & Piera Centobelli & Roberto Cerchione & Serena Strazzullo, 2022. "Additive Manufacturing and Green Information Systems as Technological Capabilities for Firm Performance," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 23(4), pages 515-534, December.
    3. Beltagui, Ahmad & Sesis, Achilleas & Stylos, Nikolaos, 2021. "A bricolage perspective on democratising innovation: The case of 3D printing in makerspaces," Technological Forecasting and Social Change, Elsevier, vol. 163(C).
    4. Harm-Jan Steenhuis & Xin Fang & Tolga Ulusemre, 2020. "Global Diffusion of Innovation during the Fourth Industrial Revolution: The Case of Additive Manufacturing or 3D Printing," International Journal of Innovation and Technology Management (IJITM), World Scientific Publishing Co. Pte. Ltd., vol. 17(01), pages 1-34, February.
    5. Berns, John P. & Jia, Yankun & Gondo, Maria, 2022. "Crowdfunding success in sustainability-oriented projects: An exploratory examination of the crowdfunding of 3D printers," Technology in Society, Elsevier, vol. 71(C).
    6. Turkcan, Hulya & Imamoglu, Salih Zeki & Ince, Huseyin, 2022. "To be more innovative and more competitive in dynamic environments: The role of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 246(C).
    7. Baldauf, Artur & Cravens, Karen S. & Diamantopoulos, Adamantios & Zeugner-Roth, Katharina Petra, 2009. "The Impact of Product-Country Image and Marketing Efforts on Retailer-Perceived Brand Equity: An Empirical Analysis," Journal of Retailing, Elsevier, vol. 85(4), pages 437-452.
    8. Xu, Kai & Hitt, Michael A. & Brock, David & Pisano, Vincenzo & Huang, Lulu S.R., 2021. "Country institutional environments and international strategy: A review and analysis of the research," Journal of International Management, Elsevier, vol. 27(1).
    9. Quan Cai & Ying Ying & Yang Liu & Wei Wu, 2019. "Innovating with Limited Resources: The Antecedents and Consequences of Frugal Innovation," Sustainability, MDPI, vol. 11(20), pages 1-23, October.
    10. Lee, Jeoung Yul & Xiao, Shufeng(Simon) & Choi, Byungchul, 2021. "Unpacking the drivers of emerging market firms’ international joint venture formation: The interplay between technological innovation strategies and home- and host-institutional pressures," Journal of Business Research, Elsevier, vol. 134(C), pages 378-392.
    11. Foshammer, Jeppe & Søberg, Peder Veng & Helo, Petri & Ituarte, Iñigo Flores, 2022. "Identification of aftermarket and legacy parts suitable for additive manufacturing: A knowledge management-based approach," International Journal of Production Economics, Elsevier, vol. 253(C).
    12. Sun, Luoyi & Hua, Guowei & Cheng, T.C.E. & Wang, Yixiao, 2020. "How to price 3D-printed products? Pricing strategy for 3D printing platforms," International Journal of Production Economics, Elsevier, vol. 226(C).
    13. Adomako, Samuel & Amankwah-Amoah, Joseph & Dankwah, George Obeng & Danso, Albert & Donbesuur, Francis, 2019. "Institutional voids, international learning effort and internationalization of emerging market new ventures," Journal of International Management, Elsevier, vol. 25(4).
    14. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    15. Beltagui, Ahmad & Kunz, Nathan & Gold, Stefan, 2020. "The role of 3D printing and open design on adoption of socially sustainable supply chain innovation," International Journal of Production Economics, Elsevier, vol. 221(C).
    16. Dhir, Amandeep & Talwar, Shalini & Islam, Nazrul & Alghafes, Rasha & Badghish, Saeed, 2023. "Different strokes for different folks: Comparative analysis of 3D printing in large, medium and small firms," Technovation, Elsevier, vol. 125(C).
    17. Culot, Giovanna & Orzes, Guido & Sartor, Marco & Nassimbeni, Guido, 2020. "The future of manufacturing: A Delphi-based scenario analysis on Industry 4.0," Technological Forecasting and Social Change, Elsevier, vol. 157(C).
    18. Marco Savastano & Carlo Amendola & Francesco Bellini & Fabrizio D’Ascenzo, 2019. "Contextual Impacts on Industrial Processes Brought by the Digital Transformation of Manufacturing: A Systematic Review," Sustainability, MDPI, vol. 11(3), pages 1-38, February.
    19. Sun, Luoyi & Hua, Guowei & Cheng, T.C.E. & Teunter, Ruud H. & Dong, Jingxin & Wang, Yixiao, 2023. "Purchase or rent? Optimal pricing for 3D printing capacity sharing platforms," European Journal of Operational Research, Elsevier, vol. 307(3), pages 1192-1205.
    20. De Beule, Filip & Klein, Martin & Verwaal, Ernst, 2020. "Institutional quality and inclusive strategies at the base of the pyramid," Journal of World Business, Elsevier, vol. 55(5).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:techno:v:101:y:2021:i:c:s0166497220300699. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.sciencedirect.com/science/journal/01664972 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.