IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v41y2015icp413-435.html
   My bibliography  Save this article

Thermo-hydraulic performance analysis of solar air heaters having artificial roughness–A review

Author

Listed:
  • Sharma, Sanjay K.
  • Kalamkar, Vilas R.

Abstract

Enhancement of heat transfer in the solar air heater ducts can be achieved by several means like using baffles, fins, ribs and groves. Until now, various attempts have been made to investigate the effects of these geometries on the enhancement of the heat transfer rate; however it is achieved at the cost of the increase in the pressure drop across the surfaces on which these elements are mounted. This paper is an attempt to summarize and conclude the investigations involving the use of small height elements and surface protrusions on absorber plate and channel walls as artificial roughness elements of various geometries and its effect on heat transfer and friction factor through experiments. It also summarizes the various correlations which have been developed for Nusselt number (Nu) and Friction factor (f) and reported in the previous investigations. The comparative study has been done to understand the results of these investigations for solar air heaters with different roughness elements on its absorber surface.

Suggested Citation

  • Sharma, Sanjay K. & Kalamkar, Vilas R., 2015. "Thermo-hydraulic performance analysis of solar air heaters having artificial roughness–A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 413-435.
    • Handle: RePEc:eee:rensus:v:41:y:2015:i:c:p:413-435
    DOI: 10.1016/j.rser.2014.08.051
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032114007278
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2014.08.051?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Varun, & Patnaik, Amar & Saini, R.P. & Singal, S.K. & Siddhartha,, 2009. "Performance prediction of solar air heater having roughened duct provided with transverse and inclined ribs as artificial roughness," Renewable Energy, Elsevier, vol. 34(12), pages 2914-2922.
    2. Sahu, M.M. & Bhagoria, J.L., 2005. "Augmentation of heat transfer coefficient by using 90° broken transverse ribs on absorber plate of solar air heater," Renewable Energy, Elsevier, vol. 30(13), pages 2057-2073.
    3. Singh, Sukhmeet & Chander, Subhash & Saini, J.S., 2011. "Heat transfer and friction factor correlations of solar air heater ducts artificially roughened with discrete V-down ribs," Energy, Elsevier, vol. 36(8), pages 5053-5064.
    4. Mittal, M.K. & Varun, & Saini, R.P. & Singal, S.K., 2007. "Effective efficiency of solar air heaters having different types of roughness elements on the absorber plate," Energy, Elsevier, vol. 32(5), pages 739-745.
    5. Varun, & Saini, R.P. & Singal, S.K., 2008. "Investigation of thermal performance of solar air heater having roughness elements as a combination of inclined and transverse ribs on the absorber plate," Renewable Energy, Elsevier, vol. 33(6), pages 1398-1405.
    6. Aharwal, K.R. & Gandhi, B.K. & Saini, J.S., 2008. "Experimental investigation on heat-transfer enhancement due to a gap in an inclined continuous rib arrangement in a rectangular duct of solar air heater," Renewable Energy, Elsevier, vol. 33(4), pages 585-596.
    7. Lanjewar, Atul & Bhagoria, J.L. & Sarviya, R.M., 2011. "Heat transfer and friction in solar air heater duct with W-shaped rib roughness on absorber plate," Energy, Elsevier, vol. 36(7), pages 4531-4541.
    8. Karwa, Rajendra & Chauhan, Kalpana, 2010. "Performance evaluation of solar air heaters having v-down discrete rib roughness on the absorber plate," Energy, Elsevier, vol. 35(1), pages 398-409.
    9. Kumar, Anil & Saini, R.P. & Saini, J.S., 2013. "Development of correlations for Nusselt number and friction factor for solar air heater with roughened duct having multi v-shaped with gap rib as artificial roughness," Renewable Energy, Elsevier, vol. 58(C), pages 151-163.
    10. Singh, Sukhmeet & Chander, Subhash & Saini, J.S., 2012. "Investigations on thermo-hydraulic performance due to flow-attack-angle in V-down rib with gap in a rectangular duct of solar air heater," Applied Energy, Elsevier, vol. 97(C), pages 907-912.
    11. Yeh, Ho-Ming & Lin, Chi-Yen, 1996. "The effect of collector aspect ratio on the collector efficiency of upward-type flat-plate solar air heaters," Energy, Elsevier, vol. 21(10), pages 843-850.
    12. Karwa, Rajendra & Chitoshiya, Girish, 2013. "Performance study of solar air heater having v-down discrete ribs on absorber plate," Energy, Elsevier, vol. 55(C), pages 939-955.
    13. Verma, S.K & Prasad, B.N, 2000. "Investigation for the optimal thermohydraulic performance of artificially roughened solar air heaters," Renewable Energy, Elsevier, vol. 20(1), pages 19-36.
    14. Tanda, Giovanni, 2011. "Performance of solar air heater ducts with different types of ribs on the absorber plate," Energy, Elsevier, vol. 36(11), pages 6651-6660.
    15. Hegazy, Adel A., 1996. "Optimization of flow-channel depth for conventional flat-plate solar air heaters," Renewable Energy, Elsevier, vol. 7(1), pages 15-21.
    16. Saini, R.P. & Verma, Jitendra, 2008. "Heat transfer and friction factor correlations for a duct having dimple-shape artificial roughness for solar air heaters," Energy, Elsevier, vol. 33(8), pages 1277-1287.
    17. Verma, Ratna & Chandra, Ram & Garg, H.P., 1992. "Optimization of solar air heaters of different designs," Renewable Energy, Elsevier, vol. 2(4), pages 521-531.
    18. Prasad, K. & Mullick, S. C., 1983. "Heat transfer characteristics of a solar air heater used for drying purposes," Applied Energy, Elsevier, vol. 13(2), pages 83-93, February.
    19. Layek, Apurba & Saini, J.S. & Solanki, S.C., 2009. "Effect of chamfering on heat transfer and friction characteristics of solar air heater having absorber plate roughened with compound turbulators," Renewable Energy, Elsevier, vol. 34(5), pages 1292-1298.
    20. Bhagoria, J.L & Saini, J.S & Solanki, S.C, 2002. "Heat transfer coefficient and friction factor correlations for rectangular solar air heater duct having transverse wedge shaped rib roughness on the absorber plate," Renewable Energy, Elsevier, vol. 25(3), pages 341-369.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Singh, Simarpreet, 2017. "Performance evaluation of a novel solar air heater with arched absorber plate," Renewable Energy, Elsevier, vol. 114(PB), pages 879-886.
    2. Singh, Sukhmeet & Singh, Bikramjit & Hans, V.S. & Gill, R.S., 2015. "CFD (computational fluid dynamics) investigation on Nusselt number and friction factor of solar air heater duct roughened with non-uniform cross-section transverse rib," Energy, Elsevier, vol. 84(C), pages 509-517.
    3. Jin, Dongxu & Zhang, Manman & Wang, Ping & Xu, Shasha, 2015. "Numerical investigation of heat transfer and fluid flow in a solar air heater duct with multi V-shaped ribs on the absorber plate," Energy, Elsevier, vol. 89(C), pages 178-190.
    4. Tabish Alam & Chandan Swaroop Meena & Nagesh Babu Balam & Ashok Kumar & Raffaello Cozzolino, 2021. "Thermo-Hydraulic Performance Characteristics and Optimization of Protrusion Rib Roughness in Solar Air Heater," Energies, MDPI, vol. 14(11), pages 1-19, May.
    5. Salman, Mohammad & Chauhan, Ranchan & Kim, Sung Chul, 2021. "Exergy analysis of solar heat collector with air jet impingement on dimple-shape-roughened absorber surface," Renewable Energy, Elsevier, vol. 179(C), pages 918-928.
    6. Singh, Sukhmeet & Chander, Subhash & Saini, J.S., 2015. "Thermo-hydraulic performance due to relative roughness pitch in V-down rib with gap in solar air heater duct—Comparison with similar rib roughness geometries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1159-1166.
    7. Kumar, Rajneesh & Varun, & Kumar, Anoop, 2016. "Thermal and fluid dynamic characteristics of flow through triangular cross-sectional duct: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 61(C), pages 123-140.
    8. Chauhan, Ranchan & Singh, Tej & Thakur, N.S. & Kumar, Nitin & Kumar, Raj & Kumar, Anil, 2018. "Heat transfer augmentation in solar thermal collectors using impinging air jets: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3179-3190.
    9. Osorio, Julian D. & Hovsapian, Rob & Ordonez, Juan C., 2016. "Effect of multi-tank thermal energy storage, recuperator effectiveness, and solar receiver conductance on the performance of a concentrated solar supercritical CO2-based power plant operating under di," Energy, Elsevier, vol. 115(P1), pages 353-368.
    10. Dezan, Daniel J. & Rocha, André D. & Ferreira, Wallace G., 2020. "Parametric sensitivity analysis and optimisation of a solar air heater with multiple rows of longitudinal vortex generators," Applied Energy, Elsevier, vol. 263(C).
    11. Nidhul, Kottayat & Yadav, Ajay Kumar & Anish, S. & Kumar, Sachin, 2021. "Critical review of ribbed solar air heater and performance evaluation of various V-rib configuration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 142(C).
    12. Debnath, Suman & Das, Biplab & Randive, P.R. & Pandey, K.M., 2018. "Performance analysis of solar air collector in the climatic condition of North Eastern India," Energy, Elsevier, vol. 165(PB), pages 281-298.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Singh Yadav, Anil & Kumar Thapak, Manish, 2014. "Artificially roughened solar air heater: Experimental investigations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 36(C), pages 370-411.
    2. Varun Pratap Singh & Siddharth Jain & Ashish Karn & Ashwani Kumar & Gaurav Dwivedi & Chandan Swaroop Meena & Nitesh Dutt & Aritra Ghosh, 2022. "Recent Developments and Advancements in Solar Air Heaters: A Detailed Review," Sustainability, MDPI, vol. 14(19), pages 1-55, September.
    3. Alam, Tabish & Kim, Man-Hoe, 2017. "A critical review on artificial roughness provided in rectangular solar air heater duct," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 387-400.
    4. Saxena, Abhishek & Varun, & El-Sebaii, A.A., 2015. "A thermodynamic review of solar air heaters," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 863-890.
    5. Nidhul, Kottayat & Kumar, Sachin & Yadav, Ajay Kumar & Anish, S., 2020. "Enhanced thermo-hydraulic performance in a V-ribbed triangular duct solar air heater: CFD and exergy analysis," Energy, Elsevier, vol. 200(C).
    6. Kumar, Anil & Kim, Man-Hoe, 2016. "Thermohydraulic performance of rectangular ducts with different multiple V-rib roughness shapes: A comprehensive review and comparative study," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 635-652.
    7. Gawande, Vipin B. & Dhoble, A.S. & Zodpe, D.B., 2014. "Effect of roughness geometries on heat transfer enhancement in solar thermal systems – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 347-378.
    8. Lanjewar, A.M. & Bhagoria, J.L. & Agrawal, M.K., 2015. "Review of development of artificial roughness in solar air heater and performance evaluation of different orientations for double arc rib roughness," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1214-1223.
    9. Yadav, Anil Singh & Bhagoria, J.L., 2013. "Heat transfer and fluid flow analysis of solar air heater: A review of CFD approach," Renewable and Sustainable Energy Reviews, Elsevier, vol. 23(C), pages 60-79.
    10. Karmveer & Naveen Kumar Gupta & Tabish Alam & Raffaello Cozzolino & Gino Bella, 2022. "A Descriptive Review to Access the Most Suitable Rib’s Configuration of Roughness for the Maximum Performance of Solar Air Heater," Energies, MDPI, vol. 15(8), pages 1-46, April.
    11. Nidhul, Kottayat & Yadav, Ajay Kumar & Anish, S. & Kumar, Sachin, 2021. "Critical review of ribbed solar air heater and performance evaluation of various V-rib configuration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 142(C).
    12. Patil, Anil Kumar, 2015. "Heat transfer mechanism and energy efficiency of artificially roughened solar air heaters—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 42(C), pages 681-689.
    13. Alam, Tabish & Saini, R.P. & Saini, J.S., 2014. "Use of turbulators for heat transfer augmentation in an air duct – A review," Renewable Energy, Elsevier, vol. 62(C), pages 689-715.
    14. Chamoli, Sunil & Thakur, N.S. & Saini, J.S., 2012. "A review of turbulence promoters used in solar thermal systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 3154-3175.
    15. Bhushan, Brij & Singh, Ranjit, 2010. "A review on methodology of artificial roughness used in duct of solar air heaters," Energy, Elsevier, vol. 35(1), pages 202-212.
    16. Singh, Simarpreet, 2017. "Performance evaluation of a novel solar air heater with arched absorber plate," Renewable Energy, Elsevier, vol. 114(PB), pages 879-886.
    17. Hans, Vishavjeet Singh & Saini, R.P. & Saini, J.S., 2009. "Performance of artificially roughened solar air heaters--A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(8), pages 1854-1869, October.
    18. Lanjewar, Atul & Bhagoria, J.L. & Sarviya, R.M., 2011. "Heat transfer and friction in solar air heater duct with W-shaped rib roughness on absorber plate," Energy, Elsevier, vol. 36(7), pages 4531-4541.
    19. Hamid, Mohammed O.A. & Zhang, Bo, 2015. "Field synergy analysis for turbulent heat transfer on ribs roughened solar air heater," Renewable Energy, Elsevier, vol. 83(C), pages 1007-1019.
    20. Singh, Satyender & Dhiman, Prashant, 2016. "Thermal performance of double pass packed bed solar air heaters – A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1010-1031.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:41:y:2015:i:c:p:413-435. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.