IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v90y2015ip2p1949-1955.html
   My bibliography  Save this article

Dynamic performance of a high-temperature PEM fuel cell – An experimental study

Author

Listed:
  • Zhang, Caizhi
  • Liu, Zhitao
  • Zhou, Weijiang
  • Chan, Siew Hwa
  • Wang, Youyi

Abstract

The dynamic behaviour of a fuel cell under varying of load is important for control and optimization. Experimental study on dynamic voltage of a HT-PEMFC (high-temperature PEM fuel cell) was conducted under 5 different currents operating on an anodic flow-through mode, dead-end mode with fixed purging intervals and dead-end mode with varying purging intervals after obtaining their forward and backward polarization curves. The results revealed that the hydration/dehydration processes of phosphoric acid used in HT-PEMFC would affect the dynamic behaviour of the fuel cell, and can be concluded by a few observations: (1) Hysteresis phenomenon was captured in the polarization study when cell current is swept from low to high (forward sweeping), then high to low (backward sweeping); (2) Under anodic flow-through mode, the magnitudes of voltage undershoots and overshoots were less severe at high current than those at the low current operation; (3) The peak performance of HT-PEMFC under anodic dead-end mode operation outperformed that under anodic flow-through mode. However, the performance of HT-PEMFC reduced gradually after the purging and the shape of the dynamic voltage curve under the longest purging interval overlapped with that under shorter purging intervals.

Suggested Citation

  • Zhang, Caizhi & Liu, Zhitao & Zhou, Weijiang & Chan, Siew Hwa & Wang, Youyi, 2015. "Dynamic performance of a high-temperature PEM fuel cell – An experimental study," Energy, Elsevier, vol. 90(P2), pages 1949-1955.
    • Handle: RePEc:eee:energy:v:90:y:2015:i:p2:p:1949-1955
    DOI: 10.1016/j.energy.2015.07.026
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544215009214
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2015.07.026?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kongstein, O.E. & Berning, T. & Børresen, B. & Seland, F. & Tunold, R., 2007. "Polymer electrolyte fuel cells based on phosphoric acid doped polybenzimidazole (PBI) membranes," Energy, Elsevier, vol. 32(4), pages 418-422.
    2. Jian, Qifei & Zhao, Yang & Wang, Haoting, 2015. "An experimental study of the dynamic behavior of a 2 kW proton exchange membrane fuel cell stack under various loading conditions," Energy, Elsevier, vol. 80(C), pages 740-745.
    3. Authayanun, Suthida & Saebea, Dang & Patcharavorachot, Yaneeporn & Arpornwichanop, Amornchai, 2014. "Effect of different fuel options on performance of high-temperature PEMFC (proton exchange membrane fuel cell) systems," Energy, Elsevier, vol. 68(C), pages 989-997.
    4. Lakshminarayana, G. & Nogami, Masayuki & Kityk, I.V., 2010. "Synthesis and characterization of anhydrous proton conducting inorganic–organic composite membranes for medium temperature proton exchange membrane fuel cells (PEMFCs)," Energy, Elsevier, vol. 35(12), pages 5260-5268.
    5. Carton, J.G. & Lawlor, V. & Olabi, A.G. & Hochenauer, C. & Zauner, G., 2012. "Water droplet accumulation and motion in PEM (Proton Exchange Membrane) fuel cell mini-channels," Energy, Elsevier, vol. 39(1), pages 63-73.
    6. Huang, Zhen-Ming & Su, Ay & Liu, Ying-Chieh, 2013. "Hydrogen generator system using Ru catalyst for PEMFC (proton exchange membrane fuel cell) applications," Energy, Elsevier, vol. 51(C), pages 230-236.
    7. Tang, Yong & Yuan, Wei & Pan, Minqiang & Li, Zongtao & Chen, Guoqing & Li, Yong, 2010. "Experimental investigation of dynamic performance and transient responses of a kW-class PEM fuel cell stack under various load changes," Applied Energy, Elsevier, vol. 87(4), pages 1410-1417, April.
    8. Boettner, Daisie D. & Moran, Michael J., 2004. "Proton exchange membrane (PEM) fuel cell-powered vehicle performance using direct-hydrogen fueling and on-board methanol reforming," Energy, Elsevier, vol. 29(12), pages 2317-2330.
    9. Hou, Yongping & Yang, Zhihua & Fang, Xue, 2011. "An experimental study on the dynamic process of PEM fuel cell stack voltage," Renewable Energy, Elsevier, vol. 36(1), pages 325-329.
    10. Singdeo, Debanand & Dey, Tapobrata & Ghosh, Prakash C., 2011. "Modelling of start-up time for high temperature polymer electrolyte fuel cells," Energy, Elsevier, vol. 36(10), pages 6081-6089.
    11. Authayanun, Suthida & Saebea, Dang & Patcharavorachot, Yaneeporn & Arpornwichanop, Amornchai, 2015. "Evaluation of an integrated methane autothermal reforming and high-temperature proton exchange membrane fuel cell system," Energy, Elsevier, vol. 80(C), pages 331-339.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yang, Wonseok & Cha, Dowon & Kim, Yongchan, 2019. "Effects of flow direction on dynamic response and stability of nonhumidification PEM fuel cell," Energy, Elsevier, vol. 185(C), pages 386-395.
    2. Duan, Hao & Zhang, Caizhi & Wang, Gucheng & Chen, Yu'an & Liu, Zhixiang & Xie, Xianshu & Shuai, Qi, 2022. "Experimental study of the dynamic and transient characteristics of sub-health fuel cell multi-stack systems without DC/DC," Energy, Elsevier, vol. 238(PC).
    3. Zhang, Caizhi & Liu, Zhitao & Zhang, Xiongwen & Chan, Siew Hwa & Wang, Youyi, 2016. "Dynamic performance of a high-temperature PEM (proton exchange membrane) fuel cell – Modelling and fuzzy control of purging process," Energy, Elsevier, vol. 95(C), pages 425-432.
    4. Zou, Wei & Froning, Dieter & Shi, Yan & Lehnert, Werner, 2021. "An online adaptive model for the nonlinear dynamics of fuel cell voltage," Applied Energy, Elsevier, vol. 288(C).
    5. Wu, Horng-Wen & Ho, Tzu-Yi & Han, Yueh-Jung, 2021. "Parametric optimization of wall-mounted cuboid rows installed in interdigitated flow channel of HT-PEM fuel cells," Energy, Elsevier, vol. 216(C).
    6. Mathieu Baudy & Olivier Rondeau & Amine Jaafar & Christophe Turpin & Sofyane Abbou & Mélanie Grignon, 2022. "Voltage Readjustment Methodology According to Pressure and Temperature Applied to a High Temperature PEM Fuel Cell," Energies, MDPI, vol. 15(9), pages 1-17, April.
    7. Hedayati, Ali & Le Corre, Olivier & Lacarrière, Bruno & Llorca, Jordi, 2016. "Dynamic simulation of pure hydrogen production via ethanol steam reforming in a catalytic membrane reactor," Energy, Elsevier, vol. 117(P2), pages 316-324.
    8. Ogungbemi, Emmanuel & Ijaodola, Oluwatosin & Khatib, F.N. & Wilberforce, Tabbi & El Hassan, Zaki & Thompson, James & Ramadan, Mohamad & Olabi, A.G., 2019. "Fuel cell membranes – Pros and cons," Energy, Elsevier, vol. 172(C), pages 155-172.
    9. Chen, Xiaohang & Wang, Yuan & Zhao, Yingru & Zhou, Yinghui, 2016. "A study of double functions and load matching of a phosphoric acid fuel cell/heat-driven refrigerator hybrid system," Energy, Elsevier, vol. 101(C), pages 359-365.
    10. Chen, Huicui & He, Yuxiang & Zhang, Xinfeng & Zhao, Xin & Zhang, Tong & Pei, Pucheng, 2018. "A method to study the intake consistency of the dual-stack polymer electrolyte membrane fuel cell system under dynamic operating conditions," Applied Energy, Elsevier, vol. 231(C), pages 1050-1058.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yu, Bor-Chern & Wang, Yi-Chun & Lu, Hsin-Chun & Lin, Hsiu-Li & Shih, Chao-Ming & Kumar, S. Rajesh & Lue, Shingjiang Jessie, 2017. "Hydroxide-ion selective electrolytes based on a polybenzimidazole/graphene oxide composite membrane," Energy, Elsevier, vol. 134(C), pages 802-812.
    2. Hedayati, Ali & Le Corre, Olivier & Lacarrière, Bruno & Llorca, Jordi, 2016. "Dynamic simulation of pure hydrogen production via ethanol steam reforming in a catalytic membrane reactor," Energy, Elsevier, vol. 117(P2), pages 316-324.
    3. Parnian, Mohammad Javad & Rowshanzamir, Soosan & Gashoul, Fatemeh, 2017. "Comprehensive investigation of physicochemical and electrochemical properties of sulfonated poly (ether ether ketone) membranes with different degrees of sulfonation for proton exchange membrane fuel ," Energy, Elsevier, vol. 125(C), pages 614-628.
    4. Jung, Chi-Young & Yi, Jae-You & Yi, Sung-Chul, 2014. "On the role of the silica-containing catalyst layer for proton exchange membrane fuel cells," Energy, Elsevier, vol. 68(C), pages 794-800.
    5. Hou, Yongping & Shen, Caoyuan & Yang, Zhihua & He, Yuntang, 2012. "A dynamic voltage model of a fuel cell stack considering the effects of hydrogen purge operation," Renewable Energy, Elsevier, vol. 44(C), pages 246-251.
    6. Zhang, Caizhi & Liu, Zhitao & Zhang, Xiongwen & Chan, Siew Hwa & Wang, Youyi, 2016. "Dynamic performance of a high-temperature PEM (proton exchange membrane) fuel cell – Modelling and fuzzy control of purging process," Energy, Elsevier, vol. 95(C), pages 425-432.
    7. Rahnavard, Aylin & Rowshanzamir, Soosan & Parnian, Mohammad Javad & Amirkhanlou, Gholam Reza, 2015. "The effect of sulfonated poly (ether ether ketone) as the electrode ionomer for self-humidifying nanocomposite proton exchange membrane fuel cells," Energy, Elsevier, vol. 82(C), pages 746-757.
    8. Ren, Zhijun & Zhang, Dongming & Wang, Zaiyi, 2012. "Stacks with TiN/titanium as the bipolar plate for PEMFCs," Energy, Elsevier, vol. 48(1), pages 577-581.
    9. Kim, Ah-Reum & Shin, Seungho & Um, Sukkee, 2016. "Multidisciplinary approaches to metallic bipolar plate design with bypass flow fields through deformable gas diffusion media of polymer electrolyte fuel cells," Energy, Elsevier, vol. 106(C), pages 378-389.
    10. Meng, Kai & Zhou, Haoran & Chen, Ben & Tu, Zhengkai, 2021. "Dynamic current cycles effect on the degradation characteristic of a H2/O2 proton exchange membrane fuel cell," Energy, Elsevier, vol. 224(C).
    11. Díaz, Manuel Antonio & Iranzo, Alfredo & Rosa, Felipe & Isorna, Fernando & López, Eduardo & Bolivar, Juan Pedro, 2015. "Effect of carbon dioxide on the contamination of low temperature and high temperature PEM (polymer electrolyte membrane) fuel cells. Influence of temperature, relative humidity and analysis of regener," Energy, Elsevier, vol. 90(P1), pages 299-309.
    12. Oh, Taek Hyun & Gang, Byeong Gyu & Kim, Hyuntak & Kwon, Sejin, 2015. "Sodium borohydride hydrogen generator using Co–P/Ni foam catalysts for 200 W proton exchange membrane fuel cell system," Energy, Elsevier, vol. 90(P1), pages 1163-1170.
    13. Oh, Taek Hyun & Jang, Bosun & Kwon, Sejin, 2015. "Estimating the energy density of direct borohydride–hydrogen peroxide fuel cell systems for air-independent propulsion applications," Energy, Elsevier, vol. 90(P1), pages 980-986.
    14. Oh, Taek Hyun, 2016. "A formic acid hydrogen generator using Pd/C3N4 catalyst for mobile proton exchange membrane fuel cell systems," Energy, Elsevier, vol. 112(C), pages 679-685.
    15. Singdeo, Debanand & Dey, Tapobrata & Gaikwad, Shrihari & Andreasen, Søren Juhl & Ghosh, Prakash C., 2017. "A new modified-serpentine flow field for application in high temperature polymer electrolyte fuel cell," Applied Energy, Elsevier, vol. 195(C), pages 13-22.
    16. Authayanun, Suthida & Saebea, Dang & Patcharavorachot, Yaneeporn & Arpornwichanop, Amornchai, 2015. "Evaluation of an integrated methane autothermal reforming and high-temperature proton exchange membrane fuel cell system," Energy, Elsevier, vol. 80(C), pages 331-339.
    17. Andújar, J.M. & Segura, F. & Isorna, F. & Calderón, A.J., 2018. "Comprehensive diagnosis methodology for faults detection and identification, and performance improvement of Air-Cooled Polymer Electrolyte Fuel Cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 88(C), pages 193-207.
    18. Chou, Chang-Chen & Liu, Cheng-Hong & Chen, Bing-Hung, 2014. "Effects of reduction temperature and pH value of polyol process on reduced graphene oxide supported Pt electrocatalysts for oxygen reduction reaction," Energy, Elsevier, vol. 70(C), pages 231-238.
    19. Sayadi, Parvin & Rowshanzamir, Soosan & Parnian, Mohammad Javad, 2016. "Study of hydrogen crossover and proton conductivity of self-humidifying nanocomposite proton exchange membrane based on sulfonated poly (ether ether ketone)," Energy, Elsevier, vol. 94(C), pages 292-303.
    20. Kim, Taegyu, 2014. "NaBH4 (sodium borohydride) hydrogen generator with a volume-exchange fuel tank for small unmanned aerial vehicles powered by a PEM (proton exchange membrane) fuel cell," Energy, Elsevier, vol. 69(C), pages 721-727.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:90:y:2015:i:p2:p:1949-1955. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.