Contact information of Elsevier
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .
Content
August 2011, Volume 88, Issue 8
- 2685-2690 Nano-magnetic catalyst KF/CaO-Fe3O4 for biodiesel production
by Hu, Shengyang & Guan, Yanping & Wang, Yun & Han, Heyou
- 2691-2701 Optimization of tri-reformer reactor to produce synthesis gas for methanol production using differential evolution (DE) method
by Arab Aboosadi, Z. & Jahanmiri, A.H. & Rahimpour, M.R.
- 2702-2712 Modeling of a 1Â MW cogenerative internal combustion engine for diagnostic scopes
by Barelli, L. & Barluzzi, E. & Bidini, G.
- 2713-2725 The use of Koroch seed oil methyl ester blends as fuel in a diesel engine
by Gogoi, T.K. & Baruah, D.C.
- 2726-2734 Disruption of sugarcane bagasse lignocellulosic structure by means of dilute sulfuric acid pretreatment with microwave-assisted heating
by Chen, Wei-Hsin & Tu, Yi-Jian & Sheen, Herng-Kuang
- 2735-2739 Efficient preparation of biodiesel from rapeseed oil over modified CaO
by Tang, Ying & Meng, Mei & Zhang, Jie & Lu, Yong
- 2740-2754 Performance comparison and parametric optimization of subcritical Organic Rankine Cycle (ORC) and transcritical power cycle system for low-temperature geothermal power generation
by Shengjun, Zhang & Huaixin, Wang & Tao, Guo
- 2755-2763 Economic feasibility and optimisation of an energy storage system for Portland Wind Farm (Victoria, Australia)
by Hessami, Mir-Akbar & Bowly, David R.
- 2764-2774 Overview of thermal energy storage (TES) potential energy savings and climate change mitigation in Spain and Europe
by Arce, Pablo & Medrano, Marc & Gil, Antoni & Oró, Eduard & Cabeza, Luisa F.
- 2775-2784 Modeling the variability of solar radiation data among weather stations by means of principal components analysis
by Zarzo, Manuel & Martí, Pau
- 2785-2790 Feasibility of photovoltaic - Thermoelectric hybrid modules
by Sark, W.G.J.H.M. van
- 2791-2801 Optimizing opening dimensions for naturally ventilated buildings
by Stephan, Louis & Bastide, Alain & Wurtz, Etienne
- 2802-2808 Energetic and exergetic analysis of CO2- and R32-based transcritical Rankine cycles for low-grade heat conversion
by Chen, Huijuan & Yogi Goswami, D. & Rahman, Muhammad M. & Stefanakos, Elias K.
- 2809-2815 Experimental performance evaluation of a vapour compression refrigerating plant when replacing R22 with alternative refrigerants
by La Rocca, Vincenzo & Panno, Giuseppe
- 2816-2823 Experimental investigation on performance improvement of electro-osmotic regeneration for solid desiccant
by Qi, Ronghui & Tian, Changqing & Shao, Shuangquan & Tang, Mingsheng & Lu, Lin
- 2824-2834 Modeling and control of a push-pull converter for photovoltaic microinverters operating in island mode
by Trujillo, C.L. & Velasco, D. & Figueres, E. & Garcerá, G. & Ortega, R.
- 2835-2845 An interval-parameter minimax regret programming approach for power management systems planning under uncertainty
by Dong, C. & Huang, G.H. & Cai, Y.P. & Xu, Y.
- 2846-2862 An interval full-infinite mixed-integer programming method for planning municipal energy systems - A case study of Beijing
by Zhu, Y. & Huang, G.H. & Li, Y.P. & He, L. & Zhang, X.X.
- 2863-2870 Procedure to carry out quality checks in photovoltaic grid-connected systems: Six cases of study
by Muñoz, J.V. & Nofuentes, G. & Aguilera, J. & Fuentes, M. & Vidal, P.G.
- 2871-2884 Numerical simulation of cooling energy consumption in connection with thermostat operation mode and comfort requirements for the Athens buildings
by Tzivanidis, C. & Antonopoulos, K.A. & Gioti, F.
- 2885-2892 Electricity consumption and real GDP causality nexus: Evidence from ARDL bounds testing approach for 11 MENA countries
by Ozturk, Ilhan & Acaravci, Ali
- 2893-2899 Environment-adjusted regional energy efficiency in Taiwan
by Hu, Jin-Li & Lio, Mon-Chi & Yeh, Fang-Yu & Lin, Cheng-Hsun
- 2900-2907 Effect of Exhaust Gas Recirculation (EGR) on performance, emissions, deposits and durability of a constant speed compression ignition engine
by Agarwal, Deepak & Singh, Shrawan Kumar & Agarwal, Avinash Kumar
- 2908-2915 Do demand and supply shocks explain USA's oil stock fluctuations?
by Hayat, Aziz & Narayan, Paresh Kumar
July 2011, Volume 88, Issue 7
- 2287-2304 Photovoltaic modules and their applications: A review on thermal modelling
by Tiwari, G.N. & Mishra, R.K. & Solanki, S.C.
- 2305-2314 Dual-injection: The flexible, bi-fuel concept for spark-ignition engines fuelled with various gasoline and biofuel blends
by Wu, Xuesong & Daniel, Ritchie & Tian, Guohong & Xu, Hongming & Huang, Zuohua & Richardson, Dave
- 2315-2323 Modeling the prospects of plug-in hybrid electric vehicles to reduce CO2 emissions
by Doucette, Reed T. & McCulloch, Malcolm D.
- 2324-2334 Dynamics of cycle-to-cycle variations in a natural gas direct-injection spark-ignition engine
by Sen, Asok K. & Zheng, Jianjun & Huang, Zuohua
- 2335-2343 Thermal performance of a meso-scale liquid-fuel combustor
by Vijayan, V. & Gupta, A.K.
- 2344-2354 Artificial Neural Network based prediction of performance and emission characteristics of a variable compression ratio CI engine using WCO as a biodiesel at different injection timings
by Shivakumar & Srinivasa Pai, P. & Shrinivasa Rao, B.R.
- 2355-2367 High swirl-inducing piston bowls in small diesel engines for emission reduction
by Prasad, B.V.V.S.U. & Sharma, C.S. & Anand, T.N.C. & Ravikrishna, R.V.
- 2368-2376 The use of Artificial Neural Network models for CO2 capture plants
by Sipöcz, Nikolett & Tobiesen, Finn Andrew & Assadi, Mohsen
- 2377-2381 Characterization and transesterification of Iranian bitter almond oil for biodiesel production
by Atapour, Mehdi & Kariminia, Hamid-Reza
- 2382-2390 Available power generation cycles to be coupled with the liquid natural gas (LNG) vaporization process in a Spanish LNG terminal
by Querol, E. & Gonzalez-Regueral, B. & García-Torrent, J. & Ramos, Alberto
- 2391-2399 Exhaust odor and smoke reduction of stationary DI diesel engines to acceptable level by water-scrubbing and air-dilution system
by Roy, Murari Mohon & Parvez, Riaz & Sarker, Rabiul Islam
- 2400-2406 Combustion and NOx emission characteristics of a retrofitted down-fired 660Â MWe utility boiler at different loads
by Li, Zhengqi & Liu, Guangkui & Zhu, Qunyi & Chen, Zhichao & Ren, Feng
- 2407-2419 Toward a positive-net-energy residential building in Serbian conditions
by Bojic, Milorad & Nikolic, Novak & Nikolic, Danijela & Skerlic, Jasmina & Miletic, Ivan
- 2420-2428 Adaptive thermal comfort model for different climatic zones of North-East India
by Singh, Manoj Kumar & Mahapatra, Sadhan & Atreya, S.K.
- 2429-2435 Effect of wall orientation on the optimum insulation thickness by using a dynamic method
by Ozel, Meral
- 2436-2444 An analytical model for coupled heat and mass transfer processes in solar collector/regenerator using liquid desiccant
by Peng, Donggen & Zhang, Xiaosong
- 2445-2453 Effects of porous media on thermal and salt diffusion of solar pond
by Shi, Yufeng & Yin, Fang & Shi, Lihua & Wence, Sun & Li, Nan & Liu, Hong
- 2454-2462 Experimental and numerical investigation of a phase change material: Thermal-energy storage and release
by Joulin, Annabelle & Younsi, Zohir & Zalewski, Laurent & Lassue, Stéphane & Rousse, Daniel R. & Cavrot, Jean-Paul
- 2463-2471 Multiple architecture system for wind speed prediction
by Bouzgou, Hassen & Benoudjit, Nabil
- 2472-2479 Step-change flow rate liquid hot water pretreatment of sweet sorghum bagasse for enhancement of total sugars recovery
by Yu, Qiang & Zhuang, Xinshu & Yuan, Zhenhong & Wang, Wen & Qi, Wei & Wang, Qiong & Tan, Xuesong
- 2480-2489 Estimation of monthly-mean daily global solar radiation based on MODIS and TRMM products
by Qin, Jun & Chen, Zhuoqi & Yang, Kun & Liang, Shunlin & Tang, Wenjun
- 2490-2508 Economic limit of Outer Continental Shelf Gulf of Mexico structure production
by Kaiser, Mark J.
- 2509-2518 The Smart Grid - A saucerful of secrets?
by Wissner, Matthias
- 2519-2529 What information should be provided in communications on biomass power generation?
by Tagashira, Naoto & Senda, Yasuko
- 2530-2540 Distributed Generation in an isolated grid: Methodology of case study for Lesvos - Greece
by Giannoulis, E.D. & Haralambopoulos, D.A.
- 2541-2547 Households' self-selection of dynamic electricity tariffs
by Ericson, Torgeir
- 2548-2558 Effect of optimal spinning reserve requirement on system pollution emission considering reserve supplying demand response in the electricity market
by Behrangrad, Mahdi & Sugihara, Hideharu & Funaki, Tsuyoshi
- 2559-2573 Nonlinear control of fuel cell hybrid power sources: Part I - Voltage control
by Bizon, N.
- 2574-2591 Nonlinear control of fuel cell hybrid power sources: Part II - Current control
by Bizon, N.
June 2011, Volume 88, Issue 6
- 1999-2012 Developments in biobutanol production: New insights
by Kumar, Manish & Gayen, Kalyan
- 2013-2018 How can we improve biomethane production per unit of feedstock in biogas plants?
by Asam, Zaki-ul-Zaman & Poulsen, Tjalfe Gorm & Nizami, Abdul-Sattar & Rafique, Rashad & Kiely, Ger & Murphy, Jerry D.
- 2019-2026 Hydrogen-rich gas production from waste plastics by pyrolysis and low-temperature steam reforming over a ruthenium catalyst
by Namioka, Tomoaki & Saito, Atsushi & Inoue, Yukiharu & Park, Yeongsu & Min, Tai-jin & Roh, Seon-ah & Yoshikawa, Kunio
- 2027-2036 Optimization of hydrogen production via coupling of the Fischer-Tropsch synthesis reaction and dehydrogenation of cyclohexane in GTL technology
by Rahimpour, M.R. & Bahmanpour, A.M.
- 2037-2049 Determining the regional potential for a grass biomethane industry
by Smyth, Beatrice M. & Smyth, Henry & Murphy, Jerry D.
- 2050-2055 Biodiesel production from mixed soybean oil and rapeseed oil
by Qiu, Fengxian & Li, Yihuai & Yang, Dongya & Li, Xiaohua & Sun, Ping
- 2056-2063 A multi-variant approach to optimize process parameters for biodiesel extraction from rubber seed oil
by Melvin Jose, D.F. & Edwin Raj, R. & Durga Prasad, B. & Robert Kennedy, Z. & Mohammed Ibrahim, A.
- 2064-2070 A facile and feasible method to evaluate and control the quality of Jatropha curcus L. seed oil for biodiesel feedstock: Gas chromatographic fingerprint
by Wang, Rui & Song, Baoan & Zhou, Wanwei & Zhang, Yuping & Hu, Deyu & Bhadury, Pinaki S. & Yang, Song
- 2071-2079 Morphological, physico-chemical and micropropagation studies in Jatropha curcas L. and RAPD analysis of the regenerants
by Leela, T. & Naresh, B. & Srikanth Reddy, M. & Madhusudhan, N.Ch. & Cherku, Prathibha Devi
- 2080-2087 Interactions and kinetic analysis of oil shale semi-coke with cornstalk during co-combustion
by Wang, Qing & Zhao, Weizhen & Liu, Hongpeng & Jia, Chunxia & Li, Shaohua
- 2088-2097 Life-cycle greenhouse gas emissions and energy balances of sugarcane ethanol production in Mexico
by García, Carlos A. & Fuentes, Alfredo & Hennecke, Anna & Riegelhaupt, Enrique & Manzini, Fabio & Masera, Omar
- 2098-2105 An integrated thermal and mechanical investigation of molten-salt thermocline energy storage
by Flueckiger, Scott & Yang, Zhen & Garimella, Suresh V.
- 2106-2112 Effects of nano-SiO2 on morphology, thermal energy storage, thermal stability, and combustion properties of electrospun lauric acid/PET ultrafine composite fibers as form-stable phase change materials
by Cai, Yibing & Ke, Huizhen & Dong, Ju & Wei, Qufu & Lin, Jiulong & Zhao, Yong & Song, Lei & Hu, Yuan & Huang, Fenglin & Gao, Weidong & Fong, Hao
- 2113-2121 Performance of shape-stabilized phase change material wallboard with periodical outside heat flux waves
by Zhou, Guobing & Yang, Yongping & Xu, Hong
- 2122-2129 Potential of autonomous ground-coupled heat pump system installations in Greece
by Michopoulos, A. & Papakostas, K.T. & Kyriakis, N.
- 2130-2135 Effect of physico-chemical parameters on biohydrogen production and growth characteristics by batch culture of Rhodobacter sphaeroides CIP 60.6
by Akroum-Amrouche, Dahbia & Abdi, Nadia & Lounici, Hakim & Mameri, Nabil
- 2136-2145 Numerical simulation and experimental validation of a helical double-pipe vertical condenser
by Colorado, D. & Hernández, J.A. & García-Valladares, O. & Huicochea, A. & Siqueiros, J.
- 2146-2156 The energy-saving characteristic of silica gel regeneration with high-intensity ultrasound
by Zhang, Weijiang & Yao, Ye & He, Beixing & Wang, Rongshun
- 2157-2167 An analytical model to predict the thermal performance of a novel parallel flow packed bed solar air heater
by Dhiman, Prashant & Thakur, N.S. & Kumar, Anoop & Singh, Satyender
- 2168-2175 Development and impact of sandwich wettability structure for gas distribution media on PEM fuel cell performance
by Wang, Yongxin & Al Shakhshir, S. & Li, Xianguo
- 2176-2182 An investigation of a household size trigeneration running with hydrogen
by Wang, Yaodong & Huang, Ye & Chiremba, Elijah & Roskilly, Anthony P. & Hewitt, Neil & Ding, Yulong & Wu, Dawei & Yu, Hongdong & Chen, Xiangping & Li, Yapeng & Huang, Jincheng & Wang, Ruzhu & Wu, Jingyi & Xia, Zaizhong & Tan, Chunqing
- 2183-2190 Dynamic modeling and optimal control strategy of waste heat recovery Organic Rankine Cycles
by Quoilin, Sylvain & Aumann, Richard & Grill, Andreas & Schuster, Andreas & Lemort, Vincent & Spliethoff, Hartmut
- 2191-2200 Behavioural, physical and socio-economic factors in household cooling energy consumption
by Yun, Geun Young & Steemers, Koen
- 2201-2209 Designing effective and efficient incentive policies for renewable energy in generation expansion planning
by Zhou, Ying & Wang, Lizhi & McCalley, James D.
- 2210-2218 Land application of organic waste - Effects on the soil ecosystem
by Odlare, M. & Arthurson, V. & Pell, M. & Svensson, K. & Nehrenheim, E. & Abubaker, J.
- 2219-2230 Exergy-based analysis of gas transmission system with application to Yamal-Europe pipeline
by Chaczykowski, M. & Osiadacz, A.J. & Uilhoorn, F.E.
- 2231-2238 Determining optimal electricity technology mix with high level of wind power penetration
by De Jonghe, Cedric & Delarue, Erik & Belmans, Ronnie & D'haeseleer, William
- 2239-2244 Parameters extraction from commercial solar cells I-V characteristics and shunt analysis
by Chen, Yifeng & Wang, Xuemeng & Li, Da & Hong, Ruijiang & Shen, Hui
- 2245-2253 Energy renovation of single-family houses in Denmark utilising long-term financing based on equity
by Kragh, J. & Rose, J.
- 2254-2260 Economic evaluation of renewable energy systems under varying scenarios and its implications to Korea's renewable energy plan
by Koo, Jamin & Park, Kyungtae & Shin, Dongil & Yoon, En Sup
- 2261-2272 The development and application of a temporal MARKAL energy system model using flexible time slicing
by Kannan, Ramachandran
- 2273-2278 CO2 emissions of Turkish manufacturing industry: A decomposition analysis
by AkbostancI, Elif & Tunç, Gül Ipek & Türüt-AsIk, Serap
- 2279-2285 Decomposition analysis of energy consumption in Chinese transportation sector
by Zhang, Ming & Li, Huanan & Zhou, Min & Mu, Hailin
May 2011, Volume 88, Issue 5
- 1461-1469 Challenges and options for a large wind power uptake by the European electricity system
by Purvins, Arturs & Zubaryeva, Alyona & Llorente, Maria & Tzimas, Evangelos & Mercier, Arnaud
- 1470-1479 Review of building energy-use performance benchmarking methodologies
by Chung, William
- 1480-1493 Thermodynamic analysis of a hard coal oxyfuel power plant with high temperature three-end membrane for air separation
by Castillo, Renzo
- 1494-1499 Spark spread - A screening parameter for combined heating and power systems
by Smith, Amanda D. & Fumo, Nelson & Mago, Pedro J.
- 1500-1509 Bottoming cycles for electric energy generation: Parametric investigation of available and innovative solutions for the exploitation of low and medium temperature heat sources
by Bianchi, M. & De Pascale, A.
- 1510-1518 Existing large steam power plant upgraded for hydrogen production
by Galanti, Leandro & Franzoni, Alessandro & Traverso, Alberto & Massardo, Aristide F.
- 1519-1531 Industrial combined heat and power (CHP) planning: Development of a methodology and application in Greece
by Salta, Myrsine & Polatidis, Heracles & Haralambopoulos, Dias
- 1532-1542 Thermally driven cooling coupled with municipal solid waste-fired power plant: Application of combined heat, cooling and power in tropical urban areas
by Udomsri, Seksan & Martin, Andrew R. & Martin, Viktoria
- 1543-1548 Heat transfer and thermophotovoltaic power generation in oil-fired heating systems
by Butcher, T.A. & Hammonds, J.S. & Horne, E. & Kamath, B. & Carpenter, J. & Woods, D.R.
- 1549-1556 Experimental investigation of frost formation on a parallel flow evaporator
by Wu, Jianghong & Ouyang, Guang & Hou, Puxiu & Xiao, Haobin
- 1557-1567 On cycle-to-cycle heat release variations in a simulated spark ignition heat engine
by Curto-Risso, P.L. & Medina, A. & Calvo Hernández, A. & Guzmán-Vargas, L. & Angulo-Brown, F.
- 1568-1577 Modeling and multi-objective optimization of parallel flow condenser using evolutionary algorithm
by Sanaye, Sepehr & Dehghandokht, Masoud
- 1578-1585 Optimal location of Hybrid Flow Controller considering modified steady-state model
by Ara, A. Lashkar & Kazemi, A. & Niaki, S.A. Nabavi
- 1586-1595 Drying control system for spray booth with optimization of fuel consumption
by Ogonowski, Zbigniew
- 1596-1605 Geometry development of the internal duct system of a heat pump tumble dryer based on fluid mechanic parameters from a CFD software
by Rezk, Kamal & Forsberg, Jan
- 1606-1612 Study on preparation and thermal property of binary fatty acid and the binary fatty acids/diatomite composite phase change materials
by Li, Min & Kao, Hongtao & Wu, Zhishen & Tan, Jinmiao
- 1613-1619 Kinetics of woodchips char gasification with steam and carbon dioxide
by Ahmed, I.I. & Gupta, A.K.
- 1620-1628 Effects of ultra-high injection pressure and micro-hole nozzle on flame structure and soot formation of impinging diesel spray
by Wang, Xiangang & Huang, Zuohua & Zhang, Wu & Kuti, Olawole Abiola & Nishida, Keiya
- 1629-1634 Emission of impinging swirling and non-swirling inverse diffusion flames
by Zhen, H.S. & Leung, C.W. & Cheung, C.S.
- 1635-1648 Heat transfer in HCCI multi-zone modeling: Validation of a new wall heat flux correlation under motoring conditions
by Komninos, N.P. & Kosmadakis, G.M.
- 1649-1655 Characteristics of cyclic heat release variability in the transition from spark ignition to HCCI in a gasoline engine
by Sen, A.K. & Litak, G. & Edwards, K.D. & Finney, C.E.A. & Daw, C.S. & Wagner, R.M.
- 1656-1663 Char and char-supported nickel catalysts for secondary syngas cleanup and conditioning
by Wang, Duo & Yuan, Wenqiao & Ji, Wei
- 1664-1670 Acetylation of corn distillers dried grains
by Reddy, Narendra & Hu, Chunyan & Yan, Kelu & Yang, Yiqi
- 1671-1680 Dominance evaluation of structural factors in a passive air-breathing direct methanol fuel cell based on orthogonal array analysis
by Yuan, Wei & Tang, Yong & Wang, Qinghui & Wan, Zhenping
- 1681-1689 Passive direct methanol fuel cells for portable electronic devices
by Achmad, F. & Kamarudin, S.K. & Daud, W.R.W. & Majlan, E.H.
- 1690-1702 A high-flexibility DC load for fuel cell and solar arrays power sources based on DC-DC converters
by Durán, E. & Andújar, J.M. & Segura, F. & Barragán, A.J.
- 1703-1709 Models for obtaining daily global solar radiation with measured air temperature data in Madrid (Spain)
by Almorox, J. & Hontoria, C. & Benito, M.
- 1710-1719 Effect of manual tilt adjustments on incident irradiance on fixed and tracking solar panels
by Lubitz, William David
- 1720-1726 Silk cocoon drying in forced convection type solar dryer
by Singh, Panna Lal
- 1727-1739 Thermal performance investigation of double pass-finned plate solar air heater
by El-Sebaii, A.A. & Aboul-Enein, S. & Ramadan, M.R.I. & Shalaby, S.M. & Moharram, B.M.
- 1740-1755 Modeling and design of a solar thermal system for hybrid cooking application
by Prasanna, U.R. & Umanand, L.
- 1756-1771 Measured and modelled improvement in solar energy yield from flat plate photovoltaic systems utilizing different tracking systems and under a range of environmental conditions
by Koussa, M. & Cheknane, A. & Hadji, S. & Haddadi, M. & Noureddine, S.
- 1772-1783 Experimental results and simulation with TRNSYS of a 7.2Â kWp grid-connected photovoltaic system
by Quesada, B. & Sánchez, C. & Cañada, J. & Royo, R. & Payá, J.
- 1784-1791 Optical performance of vertical axis three azimuth angles tracked solar panels
by Ma, Yi & Li, Guihua & Tang, Runsheng
- 1792-1796 Evaluation of an adapted inhibitor-tolerant yeast strain for ethanol production from combined hydrolysate of softwood
by Tian, Shen & Zhu, Junyong & Yang, Xiushan
- 1797-1802 Unique occurrence of unusual fatty acid in the seed oil of Aegle marmelos Corre: Screening the rich source of seed oil for bio-energy production
by Katagi, Kariyappa S. & Munnolli, Ravindra S. & Hosamani, Kallappa M.
- 1803-1812 Influence of biodiesel on engine combustion and emission characteristics
by Kegl, Breda
- 1813-1824 Dynamic simulation of fouling in a circulating fluidized biomass-fired boiler
by Sandberg, Jan & Fdhila, Rebei Bel & Dahlquist, Erik & Avelin, Anders
- 1825-1833 Heat pipe with PCM for electronic cooling
by Weng, Ying-Che & Cho, Hung-Pin & Chang, Chih-Chung & Chen, Sih-Li
- 1834-1840 Simultaneous measurement of thermal properties by thermal probe using stochastic approximation method
by Cheng, Wenlong & Ma, Ran & Xie, Kun & Liu, Na & Huang, Yonghua
- 1841-1847 Experimental study of an air-source heat pump for simultaneous heating and cooling - Part 1: Basic concepts and performance verification
by Byrne, Paul & Miriel, Jacques & Lenat, Yves
- 1848-1856 Estimation of wind energy potential using different probability density functions
by Chang, Tian Pau
- 1857-1863 Evaluation of hydrogen production capabilities of a grid-assisted wind-H2 system
by G. García Clúa, José & Mantz, Ricardo J. & De Battista, Hernán
- 1864-1872 Power quality assessment of wind turbines and comparison with conventional legal regulations: A case study in Turkey
by Tascikaraoglu, A. & Uzunoglu, M. & Vural, B. & Erdinc, O.
- 1873-1885 Perceptions of opinion leaders towards CCS demonstration projects in China
by Liang, Xi & Reiner, David & Li, Jia
- 1886-1889 Examining crude oil price - Exchange rate nexus for India during the period of extreme oil price volatility
by Ghosh, Sajal
- 1890-1905 Implementation of energy efficiency standards of household refrigerator/freezer in China: Potential environmental and economic impacts
by Tao, Jing & Yu, Suiran
- 1906-1919 Assessment of the technological development and economic potential of photobioreactors
by Holtermann, Timm & Madlener, Reinhard
- 1920-1926 Visualizing energy consumption activities as a tool for making everyday life more sustainable
by Ellegård, Kajsa & Palm, Jenny
- 1927-1939 Modeling and forecasting of Turkey's energy consumption using socio-economic and demographic variables
by Kankal, Murat & AkpInar, Adem & Kömürcü, Murat Ihsan & Özsahin, Talat Sükrü
- 1940-1948 Optimal charging of electric drive vehicles in a market environment
by Kristoffersen, Trine Krogh & Capion, Karsten & Meibom, Peter
- 1949-1956 China's energy security: The perspective of energy users
by Bambawale, Malavika Jain & Sovacool, Benjamin K.
- 1957-1964 Estimating vehicle emissions from road transport, case study: Dublin City
by Achour, H. & Carton, J.G. & Olabi, A.G.
- 1965-1982 Energy recovery in petrochemical complexes through heat integration retrofit analysis
by Feng, Xiao & Pu, Jing & Yang, Junkun & Chu, Khim Hoong
- 1983-1985 Double internal combustion piston engine
by Kazimierski, Zbyszko & Wojewoda, Jerzy
- 1986-1996 A note on the environmental Kuznets curve for CO2: A pooled mean group approach
by Iwata, Hiroki & Okada, Keisuke & Samreth, Sovannroeun
April 2011, Volume 88, Issue 4
- 981-1007 A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research
by Wang, Yun & Chen, Ken S. & Mishler, Jeffrey & Cho, Sung Chan & Adroher, Xavier Cordobes
- 1008-1019 A critical review of the applicability of biodiesel and grass biomethane as biofuels to satisfy both biofuel targets and sustainability criteria
by Thamsiriroj, Thanasit & Murphy, Jerry D.
- 1020-1031 Opportunities and challenges for biodiesel fuel
by Lin, Lin & Cunshan, Zhou & Vittayapadung, Saritporn & Xiangqian, Shen & Mingdong, Dong
- 1032-1048 Paradigm shift in urban energy systems through distributed generation: Methods and models
by Manfren, Massimiliano & Caputo, Paola & Costa, Gaia
- 1049-1058 An integrated control method for a wind farm to reduce frequency deviations in a small power system
by Kaneko, Toshiaki & Uehara, Akie & Senjyu, Tomonobu & Yona, Atsushi & Urasaki, Naomitsu
- 1059-1067 Cogeneration planning under uncertainty: Part I: Multiple time frame approach
by Carpaneto, Enrico & Chicco, Gianfranco & Mancarella, Pierluigi & Russo, Angela
- 1068-1074 Influence of injector technology on injection and combustion development - Part 1: Hydraulic characterization
by Payri, R. & Salvador, F.J. & Gimeno, J. & De la Morena, J.
- 1075-1083 Cogeneration planning under uncertainty. Part II: Decision theory-based assessment of planning alternatives
by Carpaneto, Enrico & Chicco, Gianfranco & Mancarella, Pierluigi & Russo, Angela
- 1084-1095 Design and performance of a pressurized cyclone combustor (PCC) for high and low heating value gas combustion
by Al-attab, K.A. & Zainal, Z.A.
- 1096-1104 Investigation of reverse flow distributed combustion for gas turbine application
by Arghode, Vaibhav K. & Gupta, Ashwani K.
- 1105-1112 Pyrolysis gasification of dried sewage sludge in a combined screw and rotary kiln gasifier
by Chun, Young Nam & Kim, Seong Cheon & Yoshikawa, Kunio
- 1113-1119 Numerical study on NOx/CO emissions in the diffusion flames of high-temperature off-gas of steelmaking converter
by Li, Sen & Wei, Xiaolin & Yu, Linxin
- 1120-1129 The energy consumption and environmental impacts of SCR technology in China
by Liang, Zengying & Ma, Xiaoqian & Lin, Hai & Tang, Yuting
- 1130-1139 Influence of injector technology on injection and combustion development - Part 2: Combustion analysis
by Payri, R. & Salvador, F.J. & Gimeno, J. & De la Morena, J.
- 1140-1152 Multi-dimensional scavenging analysis of a free-piston linear alternator based on numerical simulation
by Mao, Jinlong & Zuo, Zhengxing & Li, Wen & Feng, Huihua
- 1153-1163 Experimental investigation on the effect of intake air temperature and air-fuel ratio on cycle-to-cycle variations of HCCI combustion and performance parameters
by Maurya, Rakesh Kumar & Agarwal, Avinash Kumar
- 1164-1168 Study of optimal pulverized coal concentration in a four-wall tangentially fired furnace
by Tan, Houzhang & Niu, Yanqing & Wang, Xuebin & Xu, Tongmo & Hui, Shien
- 1169-1180 Experimental study of combustion and emission characteristics of ethanol fuelled port injected homogeneous charge compression ignition (HCCI) combustion engine
by Maurya, Rakesh Kumar & Agarwal, Avinash Kumar
- 1181-1186 A method for evaluating the efficiency of PEM fuel cell engine
by Hou, Yongping & Wang, Bowen & Yang, Zhihua
- 1187-1196 An integrated power generation system combining solid oxide fuel cell and oxy-fuel combustion for high performance and CO2 capture
by Park, Sung Ku & Kim, Tong Seop & Sohn, Jeong L. & Lee, Young Duk
- 1197-1204 Strategies for optimizing the opening of the outlet air circuit's nozzle to improve the efficiency of the PEMFC generator
by Tirnovan, R. & Giurgea, S. & Miraoui, A.
- 1205-1210 Effect of wheat gluten proteins on bioethanol yield from grain
by Buresová, Iva & Hrivna, Ludek
- 1211-1223 Direct dimethyl ether (DME) synthesis through a thermally coupled heat exchanger reactor
by Vakili, R. & Pourazadi, E. & Setoodeh, P. & Eslamloueyan, R. & Rahimpour, M.R.
- 1224-1232 Techno-economic evaluation of thermo-chemical biomass-to-ethanol
by He, Jie & Zhang, Wennan
- 1233-1240 Bio-energy and youth: Analyzing the role of school, home, and media from the future policy perspectives
by Halder, Pradipta & Havu-Nuutinen, Sari & Pietarinen, Janne & Pelkonen, Paavo
- 1241-1250 Forest biomass supply logistics for a power plant using the discrete-event simulation approach
by Mobini, Mahdi & Sowlati, Taraneh & Sokhansanj, Shahab
- 1251-1256 Biocatalytic production of biodiesel from cottonseed oil: Standardization of process parameters and comparison of fuel characteristics
by Chattopadhyay, Soham & Karemore, Ankush & Das, Sancharini & Deysarkar, Asoke & Sen, Ramkrishna
- 1257-1265 Experimental study of vertical ground-source heat pump performance evaluation for cold climate in Turkey
by Ozyurt, Omer & Ekinci, Dundar Arif
- 1266-1280 Pneumatic and thermal design procedure and analysis of earth-to-air heat exchangers of registry type
by Badescu, Viorel & Isvoranu, Dragos
- 1281-1290 Optimal operation conditions for a single-stage heat transformer by means of an artificial neural network inverse
by Colorado, D. & Hernández, J.A. & Rivera, W. & Martínez, H. & Juárez, D.
- 1291-1297 Experiments and simulations on low-temperature waste heat harvesting system by thermoelectric power generators
by Hsu, Cheng-Ting & Huang, Gia-Yeh & Chu, Hsu-Shen & Yu, Ben & Yao, Da-Jeng
- 1298-1311 Error analysis of short term wind power prediction models
by De Giorgi, Maria Grazia & Ficarella, Antonio & Tarantino, Marco
- 1312-1321 Energy efficiency criteria in uninterruptible power supply selection
by Moreno-Munoz, A. & Rosa, Juan José González de la & Flores-Arias, J.M. & Bellido-Outerino, F.J. & Gil-de-Castro, A.
- 1322-1330 Transient analysis of variable-speed wind turbines at wind speed disturbances and a pitch control malfunction
by Melício, R. & Mendes, V.M.F. & Catalão, J.P.S.
- 1331-1342 Optimization of insulation thickness for different glazing areas in buildings for various climatic regions in Turkey
by Özkan, Derya B. & Onan, Cenk
- 1343-1353 Design and performance of energy-efficient solar residential house in Andorra
by Llovera, Jordi & Potau, Xavi & Medrano, Marc & Cabeza, Luisa F.
- 1354-1365 Desiccant wheel regenerated by thermal energy from a microcogenerator: Experimental assessment of the performances
by Angrisani, Giovanni & Capozzoli, Alfonso & Minichiello, Francesco & Roselli, Carlo & Sasso, Maurizio
- 1366-1376 Wet and dry cooling systems optimization applied to a modern waste-to-energy cogeneration heat and power plant
by Barigozzi, G. & Perdichizzi, A. & Ravelli, S.
- 1377-1385 CO2 emissions, GDP and energy intensity: A multivariate cointegration and causality analysis for Greece, 1977-2007
by Hatzigeorgiou, Emmanouil & Polatidis, Heracles & Haralambopoulos, Dias
- 1386-1394 Development of a multicriteria tool for optimizing the renovation of buildings
by Chantrelle, Fanny Pernodet & Lahmidi, Hicham & Keilholz, Werner & Mankibi, Mohamed El & Michel, Pierre
- 1395-1404 Solar thermal collector augmented by flat plate booster reflector: Optimum inclination of collector and reflector
by Tanaka, Hiroshi
- 1405-1414 ARMA based approaches for forecasting the tuple of wind speed and direction
by Erdem, Ergin & Shi, Jing
- 1415-1426 A case study of a typical 2.32Â kWP stand-alone photovoltaic (SAPV) in composite climate of New Delhi (India)
by Chel, Arvind & Tiwari, G.N.
- 1427-1433 Optimization of tilt angle for solar panel: Case study for Madinah, Saudi Arabia
by Benghanem, M.
- 1434-1440 Prediction of compressed air transport properties at elevated pressures and high temperatures using simple method
by Bahadori, Alireza
- 1441-1446 Cost efficiency of Japanese steam power generation companies: A Bayesian comparison of random and fixed frontier models
by Assaf, A. George & Barros, Carlos Pestana & Managi, Shunsuke
- 1447-1454 Experimental diagnosis of the influence of operational variables on the performance of a solar absorption cooling system
by Venegas, M. & Rodríguez-Hidalgo, M.C. & Salgado, R. & Lecuona, A. & Rodríguez, P. & Gutiérrez, G.
- 1455-1459 A comparative study of solar irradiation models on various inclined surfaces for India
by Pandey, Chanchal Kumar & Katiyar, A.K.
March 2011, Volume 88, Issue 3
- 559-567 Homogeneous Charge Compression Ignition (HCCI) combustion: Implementation and effects on pollutants in direct injection diesel engines
by Gan, Suyin & Ng, Hoon Kiat & Pang, Kar Mun
- 568-576 Heat distribution and the future competitiveness of district heating
by Persson, Urban & Werner, Sven
- 577-589 The MIND method: A decision support for optimization of industrial energy systems - Principles and case studies
by Karlsson, Magnus
- 590-598 Carbon price volatility: Evidence from EU ETS
by Feng, Zhen-Hua & Zou, Le-Le & Wei, Yi-Ming
- 599-611 Planning regional energy system in association with greenhouse gas mitigation under uncertainty
by Li, Y.P. & Huang, G.H. & Chen, X.
- 612-621 Methodology for characterising domestic electrical demand by usage categories
by Kilpatrick, R.A.R. & Banfill, P.F.G. & Jenkins, D.P.
- 622-629 Parametric sensitivity analysis for techno-economic parameters in Indian power sector
by Mallah, Subhash & Bansal, N.K.
- 630-635 An LCA based indicator for evaluation of alternative energy routes
by Rubio Rodríguez, M.A. & Ruyck, J. De & Díaz, P. Roque & Verma, V.K. & Bram, S.