IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v88y2011i5p1857-1863.html
   My bibliography  Save this article

Evaluation of hydrogen production capabilities of a grid-assisted wind-H2 system

Author

Listed:
  • G. García Clúa, José
  • Mantz, Ricardo J.
  • De Battista, Hernán

Abstract

This paper analyzes the operation of a grid-assisted wind power system dedicated to hydrogen production. Several operation modes are evaluated with the aim of establishing control strategies for different requirements such as optimum wind power capture, maximum H2 production rate and maximum clean H2 production. Each operation mode is achieved by specific control of the grid-side power electronic converter. The operation of the wind turbine, the electrolyzer and the electronic converter connected to a common DC-bus are represented on the same voltage-current plane. Basic schemes of controllers are suggested to fulfill operation requirements. Curves of power and H2 production rate as function of wind speed are displayed for each mode. Also, conclusions about contribution of wind energy to clean H2 are drawn.

Suggested Citation

  • G. García Clúa, José & Mantz, Ricardo J. & De Battista, Hernán, 2011. "Evaluation of hydrogen production capabilities of a grid-assisted wind-H2 system," Applied Energy, Elsevier, vol. 88(5), pages 1857-1863, May.
  • Handle: RePEc:eee:appene:v:88:y:2011:i:5:p:1857-1863
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(10)00506-4
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zini, Gabriele & Tartarini, Paolo, 2010. "Wind-hydrogen energy stand-alone system with carbon storage: Modeling and simulation," Renewable Energy, Elsevier, vol. 35(11), pages 2461-2467.
    2. Troncoso, E. & Newborough, M., 2010. "Electrolysers as a load management mechanism for power systems with wind power and zero-carbon thermal power plant," Applied Energy, Elsevier, vol. 87(1), pages 1-15, January.
    3. Khan, M.J. & Iqbal, M.T., 2005. "Dynamic modeling and simulation of a small wind–fuel cell hybrid energy system," Renewable Energy, Elsevier, vol. 30(3), pages 421-439.
    4. Sayigh, Ali, 1999. "Renewable energy -- the way forward," Applied Energy, Elsevier, vol. 64(1-4), pages 15-30, September.
    5. Khan, M.J. & Iqbal, M.T., 2009. "Analysis of a small wind-hydrogen stand-alone hybrid energy system," Applied Energy, Elsevier, vol. 86(11), pages 2429-2442, November.
    6. Zhou, Wei & Lou, Chengzhi & Li, Zhongshi & Lu, Lin & Yang, Hongxing, 2010. "Current status of research on optimum sizing of stand-alone hybrid solar-wind power generation systems," Applied Energy, Elsevier, vol. 87(2), pages 380-389, February.
    7. Deshmukh, Sachin S. & Boehm, Robert F., 2008. "Review of modeling details related to renewably powered hydrogen systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(9), pages 2301-2330, December.
    8. Agbossou, Kodjo & Kolhe, Mohan Lal & Hamelin, Jean & Bernier, Étienne & Bose, Tapan K., 2004. "Electrolytic hydrogen based renewable energy system with oxygen recovery and re-utilization," Renewable Energy, Elsevier, vol. 29(8), pages 1305-1318.
    9. Korpås, Magnus & Greiner, Christopher J., 2008. "Opportunities for hydrogen production in connection with wind power in weak grids," Renewable Energy, Elsevier, vol. 33(6), pages 1199-1208.
    10. Santarelli, M. & Macagno, S., 2004. "Hydrogen as an energy carrier in stand-alone applications based on PV and PV–micro-hydro systems," Energy, Elsevier, vol. 29(8), pages 1159-1182.
    11. Salameh, Mamdouh G., 2003. "Can renewable and unconventional energy sources bridge the global energy gap in the 21st century?," Applied Energy, Elsevier, vol. 75(1-2), pages 33-42, May.
    12. Baroudi, Jamal A. & Dinavahi, Venkata & Knight, Andrew M., 2007. "A review of power converter topologies for wind generators," Renewable Energy, Elsevier, vol. 32(14), pages 2369-2385.
    13. Sopian, Kamaruzzaman & Ibrahim, Mohd Zamri & Wan Daud, Wan Ramli & Othman, Mohd Yusof & Yatim, Baharuddin & Amin, Nowshad, 2009. "Performance of a PV–wind hybrid system for hydrogen production," Renewable Energy, Elsevier, vol. 34(8), pages 1973-1978.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Kamel, Rashad M., 2014. "Employing two novel mechanical fault ride through controllers for keeping stability of fixed speed wind generation systems hosted by standalone micro-grid," Applied Energy, Elsevier, vol. 116(C), pages 398-408.
    2. Olateju, Babatunde & Monds, Joshua & Kumar, Amit, 2014. "Large scale hydrogen production from wind energy for the upgrading of bitumen from oil sands," Applied Energy, Elsevier, vol. 118(C), pages 48-56.
    3. Hurtubia, Byron & Sauma, Enzo, 2021. "Economic and environmental analysis of hydrogen production when complementing renewable energy generation with grid electricity," Applied Energy, Elsevier, vol. 304(C).
    4. Bao, Zewei & Yang, Fusheng & Wu, Zhen & Cao, Xinxin & Zhang, Zaoxiao, 2013. "Simulation studies on heat and mass transfer in high-temperature magnesium hydride reactors," Applied Energy, Elsevier, vol. 112(C), pages 1181-1189.
    5. Ji, Changwei & Yang, Jinxin & Liu, Xiaolong & Wang, Shuofeng & Zhang, Bo & Wang, Du, 2016. "Enhancing the fuel economy and emissions performance of a gasoline engine-powered vehicle with idle elimination and hydrogen start," Applied Energy, Elsevier, vol. 182(C), pages 135-144.
    6. Grueger, Fabian & Möhrke, Fabian & Robinius, Martin & Stolten, Detlef, 2017. "Early power to gas applications: Reducing wind farm forecast errors and providing secondary control reserve," Applied Energy, Elsevier, vol. 192(C), pages 551-562.
    7. Apostolou, Dimitrios & Enevoldsen, Peter, 2019. "The past, present and potential of hydrogen as a multifunctional storage application for wind power," Renewable and Sustainable Energy Reviews, Elsevier, vol. 112(C), pages 917-929.
    8. Ghandehariun, S. & Wang, Z. & Naterer, G.F. & Rosen, M.A., 2015. "Experimental investigation of molten salt droplet quenching and solidification processes of heat recovery in thermochemical hydrogen production," Applied Energy, Elsevier, vol. 157(C), pages 267-275.
    9. Grüger, Fabian & Dylewski, Lucy & Robinius, Martin & Stolten, Detlef, 2018. "Carsharing with fuel cell vehicles: Sizing hydrogen refueling stations based on refueling behavior," Applied Energy, Elsevier, vol. 228(C), pages 1540-1549.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zini, Gabriele & Tartarini, Paolo, 2010. "Wind-hydrogen energy stand-alone system with carbon storage: Modeling and simulation," Renewable Energy, Elsevier, vol. 35(11), pages 2461-2467.
    2. Khan, M.J. & Iqbal, M.T., 2009. "Analysis of a small wind-hydrogen stand-alone hybrid energy system," Applied Energy, Elsevier, vol. 86(11), pages 2429-2442, November.
    3. Díaz-González, Francisco & Sumper, Andreas & Gomis-Bellmunt, Oriol & Villafáfila-Robles, Roberto, 2012. "A review of energy storage technologies for wind power applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(4), pages 2154-2171.
    4. Deshmukh, Sachin S. & Boehm, Robert F., 2008. "Review of modeling details related to renewably powered hydrogen systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(9), pages 2301-2330, December.
    5. Chen, Hung-Cheng, 2013. "Optimum capacity determination of stand-alone hybrid generation system considering cost and reliability," Applied Energy, Elsevier, vol. 103(C), pages 155-164.
    6. Apostolou, Dimitrios & Enevoldsen, Peter, 2019. "The past, present and potential of hydrogen as a multifunctional storage application for wind power," Renewable and Sustainable Energy Reviews, Elsevier, vol. 112(C), pages 917-929.
    7. Marino, C. & Nucara, A. & Panzera, M.F. & Pietrafesa, M. & Varano, V., 2019. "Energetic and economic analysis of a stand alone photovoltaic system with hydrogen storage," Renewable Energy, Elsevier, vol. 142(C), pages 316-329.
    8. Nordin, Nur Dalilah & Rahman, Hasimah Abdul, 2019. "Comparison of optimum design, sizing, and economic analysis of standalone photovoltaic/battery without and with hydrogen production systems," Renewable Energy, Elsevier, vol. 141(C), pages 107-123.
    9. Hasan, Nor Shahida & Hassan, Mohammad Yusri & Majid, Md Shah & Rahman, Hasimah Abdul, 2013. "Review of storage schemes for wind energy systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 237-247.
    10. Bajpai, Prabodh & Dash, Vaishalee, 2012. "Hybrid renewable energy systems for power generation in stand-alone applications: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 2926-2939.
    11. Kavadias, K.A. & Apostolou, D. & Kaldellis, J.K., 2018. "Modelling and optimisation of a hydrogen-based energy storage system in an autonomous electrical network," Applied Energy, Elsevier, vol. 227(C), pages 574-586.
    12. Perera, A.T.D. & Wickremasinghe, D.M.I.J. & Mahindarathna, D.V.S. & Attalage, R.A. & Perera, K.K.C.K. & Bartholameuz, E.M., 2012. "Sensitivity of internal combustion generator capacity in standalone hybrid energy systems," Energy, Elsevier, vol. 39(1), pages 403-411.
    13. Kasseris, Emmanuel & Samaras, Zissis & Zafeiris, Dimitrios, 2007. "Optimization of a wind-power fuel-cell hybrid system in an autonomous electrical network environment," Renewable Energy, Elsevier, vol. 32(1), pages 57-79.
    14. Das, Barun K. & Al-Abdeli, Yasir M. & Kothapalli, Ganesh, 2017. "Optimisation of stand-alone hybrid energy systems supplemented by combustion-based prime movers," Applied Energy, Elsevier, vol. 196(C), pages 18-33.
    15. Weinand, Jann Michael & Scheller, Fabian & McKenna, Russell, 2020. "Reviewing energy system modelling of decentralized energy autonomy," Energy, Elsevier, vol. 203(C).
    16. Gutiérrez-Martín, F. & Calcerrada, A.B. & de Lucas-Consuegra, A. & Dorado, F., 2020. "Hydrogen storage for off-grid power supply based on solar PV and electrochemical reforming of ethanol-water solutions," Renewable Energy, Elsevier, vol. 147(P1), pages 639-649.
    17. Lin, Chien-Hung & Tsai, Sung-Ying, 2012. "An investigation of coated aluminium bipolar plates for PEMFC," Applied Energy, Elsevier, vol. 100(C), pages 87-92.
    18. Genç, Mustafa Serdar & Çelik, Muhammet & Karasu, İlyas, 2012. "A review on wind energy and wind–hydrogen production in Turkey: A case study of hydrogen production via electrolysis system supplied by wind energy conversion system in Central Anatolian Turkey," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(9), pages 6631-6646.
    19. Olateju, Babatunde & Monds, Joshua & Kumar, Amit, 2014. "Large scale hydrogen production from wind energy for the upgrading of bitumen from oil sands," Applied Energy, Elsevier, vol. 118(C), pages 48-56.
    20. Suomalainen, K. & Silva, C. & Ferrão, P. & Connors, S., 2013. "Wind power design in isolated energy systems: Impacts of daily wind patterns," Applied Energy, Elsevier, vol. 101(C), pages 533-540.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:88:y:2011:i:5:p:1857-1863. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.