IDEAS home Printed from https://ideas.repec.org/a/eee/recore/v103y2015icp155-170.html
   My bibliography  Save this article

Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns

Author

Listed:
  • Tsiliyannis, Christos Aristeides

Abstract

Resource preservation (RP) and homeostasis is a key aspect of sustainability and a prime target of policy considerations. Heralded as an efficient means towards sustainable production and consumption of manmade products, cyclic manufacturing (CM) is fundamentally different from traditional open loop manufacturing: raw materials are not merely resources extracted from the natural environment, but products returned by the consumer as well. RP via CM strongly depends on the quantity and quality of returns. Affected by several factors (economic cycles, income, technological innovation, energy efficiency, social trends, etc.), the majority of returns, including end-of-life (EoL) returns, are random and unobservable. The present work reveals the intricacies of RP under real market conditions, including uncertainty in growth, stock and returns. It is shown that the recycling rate, the reuse rate and key parameters, including mean lifetime, number of reuse cycles and cyclic frequency, may not discern RP enhancement. A simple dimensionless rate is proposed and shown suitable for RP assessment. Its efficacy is demonstrated under leveled consumption/sales, growth or contraction: the minimal rate for reduced virgin material demand is higher under rising sales/consumption and lower in periods of economic austerity. The results may be useful for RP monitoring and proactive sustainable policy.

Suggested Citation

  • Tsiliyannis, Christos Aristeides, 2015. "Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 155-170.
    • Handle: RePEc:eee:recore:v:103:y:2015:i:c:p:155-170
    DOI: 10.1016/j.resconrec.2015.07.001
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0921344915300343
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resconrec.2015.07.001?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Peeters, Jef R. & Vanegas, Paul & Tange, Lein & Van Houwelingen, Jan & Duflou, Joost R., 2014. "Closed loop recycling of plastics containing Flame Retardants," Resources, Conservation & Recycling, Elsevier, vol. 84(C), pages 35-43.
    2. Kasulaitis, Barbara V. & Babbitt, Callie W. & Kahhat, Ramzy & Williams, Eric & Ryen, Erinn G., 2015. "Evolving materials, attributes, and functionality in consumer electronics: Case study of laptop computers," Resources, Conservation & Recycling, Elsevier, vol. 100(C), pages 1-10.
    3. Roland Geyer & Luk N. Van Wassenhove & Atalay Atasu, 2007. "The Economics of Remanufacturing Under Limited Component Durability and Finite Product Life Cycles," Management Science, INFORMS, vol. 53(1), pages 88-100, January.
    4. Mahmoudzadeh, Mahdi & Mansour, Saeed & Karimi, Behrouz, 2013. "To develop a third-party reverse logistics network for end-of-life vehicles in Iran," Resources, Conservation & Recycling, Elsevier, vol. 78(C), pages 1-14.
    5. Abdul Azeez Erumban, 2008. "Lifetimes Of Machinery And Equipment: Evidence From Dutch Manufacturing," Review of Income and Wealth, International Association for Research in Income and Wealth, vol. 54(2), pages 237-268, June.
    6. Tim Cooper, 2005. "Slower Consumption Reflections on Product Life Spans and the “Throwaway Society”," Journal of Industrial Ecology, Yale University, vol. 9(1‐2), pages 51-67, January.
    7. L. Beril Toktay & Lawrence M. Wein & Stefanos A. Zenios, 2000. "Inventory Management of Remanufacturable Products," Management Science, INFORMS, vol. 46(11), pages 1412-1426, November.
    8. Zhang, Tongzhu & Chu, Jiangwei & Wang, Xueping & Liu, Xianghai & Cui, Pengfei, 2011. "Development pattern and enhancing system of automotive components remanufacturing industry in China," Resources, Conservation & Recycling, Elsevier, vol. 55(6), pages 613-622.
    9. Huysman, Sofie & Debaveye, Sam & Schaubroeck, Thomas & Meester, Steven De & Ardente, Fulvio & Mathieux, Fabrice & Dewulf, Jo, 2015. "The recyclability benefit rate of closed-loop and open-loop systems: A case study on plastic recycling in Flanders," Resources, Conservation & Recycling, Elsevier, vol. 101(C), pages 53-60.
    10. Kleijn, Rene & Huele, Ruben & van der Voet, Ester, 2000. "Dynamic substance flow analysis: the delaying mechanism of stocks, with the case of PVC in Sweden," Ecological Economics, Elsevier, vol. 32(2), pages 241-254, February.
    11. Schmid, Alexis & Naquin, Pascale & Gourdon, Rémy, 2013. "Incidence of the level of deconstruction on material reuse, recycling and recovery from end-of life vehicles: an industrial-scale experimental study," Resources, Conservation & Recycling, Elsevier, vol. 72(C), pages 118-126.
    12. Elshkaki, Ayman & van der Voet, Ester & Timmermans, Veerle & Van Holderbeke, Mirja, 2005. "Dynamic stock modelling: A method for the identification and estimation of future waste streams and emissions based on past production and product stock characteristics," Energy, Elsevier, vol. 30(8), pages 1353-1363.
    13. Ardente, Fulvio & Calero Pastor, Maria & Mathieux, Fabrice & Talens Peiró, Laura, 2015. "Analysis of end-of-life treatments of commercial refrigerating appliances: Bridging product and waste policies," Resources, Conservation & Recycling, Elsevier, vol. 101(C), pages 42-52.
    14. Woolridge, Anne C. & Ward, Garth D. & Phillips, Paul S. & Collins, Michael & Gandy, Simon, 2006. "Life cycle assessment for reuse/recycling of donated waste textiles compared to use of virgin material: An UK energy saving perspective," Resources, Conservation & Recycling, Elsevier, vol. 46(1), pages 94-103.
    15. Kissling, Ramon & Coughlan, Damian & Fitzpatrick, Colin & Boeni, Heinz & Luepschen, Claudia & Andrew, Stefan & Dickenson, John, 2013. "Success factors and barriers in re-use of electrical and electronic equipment," Resources, Conservation & Recycling, Elsevier, vol. 80(C), pages 21-31.
    16. Jun‐Ki Choi & Vasilis Fthenakis, 2010. "Economic Feasibility of Recycling Photovoltaic Modules," Journal of Industrial Ecology, Yale University, vol. 14(6), pages 947-964, December.
    17. Kissling, Ramon & Fitzpatrick, Colin & Boeni, Heinz & Luepschen, Claudia & Andrew, Stefan & Dickenson, John, 2012. "Definition of generic re-use operating models for electrical and electronic equipment," Resources, Conservation & Recycling, Elsevier, vol. 65(C), pages 85-99.
    18. Ardente, Fulvio & Mathieux, Fabrice & Recchioni, Marco, 2014. "Recycling of electronic displays: Analysis of pre-processing and potential ecodesign improvements," Resources, Conservation & Recycling, Elsevier, vol. 92(C), pages 158-171.
    19. Hajime Ohno & Kazuyo Matsubae & Kenichi Nakajima & Shinichiro Nakamura & Tetsuya Nagasaka, 2014. "Unintentional Flow of Alloying Elements in Steel during Recycling of End-of-Life Vehicles," Journal of Industrial Ecology, Yale University, vol. 18(2), pages 242-253, April.
    20. Masahiro Oguchi & Shinsuke Murakami & Tomohiro Tasaki & Ichiro Daigo & Seiji Hashimoto, 2010. "Lifespan of Commodities, Part II," Journal of Industrial Ecology, Yale University, vol. 14(4), pages 613-626, August.
    21. Niza, Samuel & Ferrão, Paulo, 2006. "A transitional economy's metabolism: The case of Portugal," Resources, Conservation & Recycling, Elsevier, vol. 46(3), pages 265-280.
    22. Shinsuke Murakami & Masahiro Oguchi & Tomohiro Tasaki & Ichiro Daigo & Seiji Hashimoto, 2010. "Lifespan of Commodities, Part I," Journal of Industrial Ecology, Yale University, vol. 14(4), pages 598-612, August.
    23. Teunter, Ruud & Tang, Ou & Kaparis, Konstantinos, 2009. "Heuristics for the economic lot scheduling problem with returns," International Journal of Production Economics, Elsevier, vol. 118(1), pages 323-330, March.
    24. Paiano, Annarita & Lagioia, Giovanni & Cataldo, Andrea, 2013. "A critical analysis of the sustainability of mobile phone use," Resources, Conservation & Recycling, Elsevier, vol. 73(C), pages 162-171.
    25. V. Daniel R. Guide & Luk N. Van Wassenhove, 2009. "OR FORUM---The Evolution of Closed-Loop Supply Chain Research," Operations Research, INFORMS, vol. 57(1), pages 10-18, February.
    26. Kilic, Huseyin Selcuk & Cebeci, Ufuk & Ayhan, Mustafa Batuhan, 2015. "Reverse logistics system design for the waste of electrical and electronic equipment (WEEE) in Turkey," Resources, Conservation & Recycling, Elsevier, vol. 95(C), pages 120-132.
    27. Kagawa, Shigemi & Tasaki, Tomohiro & Moriguchi, Yuichi, 2006. "The environmental and economic consequences of product lifetime extension: Empirical analysis for automobile use," Ecological Economics, Elsevier, vol. 58(1), pages 108-118, June.
    28. Ohno, Hajime & Matsubae, Kazuyo & Nakajima, Kenichi & Kondo, Yasushi & Nakamura, Shinichiro & Nagasaka, Tetsuya, 2015. "Toward the efficient recycling of alloying elements from end of life vehicle steel scrap," Resources, Conservation & Recycling, Elsevier, vol. 100(C), pages 11-20.
    29. Kreiger, M.A. & Shonnard, D.R. & Pearce, J.M., 2013. "Life cycle analysis of silane recycling in amorphous silicon-based solar photovoltaic manufacturing," Resources, Conservation & Recycling, Elsevier, vol. 70(C), pages 44-49.
    30. Um, Jumyung & Yoon, Joo-Sung & Suh, Suk-Hwan, 2008. "An architecture design with data model for product recovery management systems," Resources, Conservation & Recycling, Elsevier, vol. 52(10), pages 1175-1184.
    31. Steffens, Paul R, 2001. "An Aggregate Sales Model for Consumer Durables Incorporating a Time-Varying Mean Replacement Age," Journal of Forecasting, John Wiley & Sons, Ltd., vol. 20(1), pages 63-77, January.
    32. Hatayama, Hiroki & Daigo, Ichiro & Tahara, Kiyotaka, 2014. "Tracking effective measures for closed-loop recycling of automobile steel in China," Resources, Conservation & Recycling, Elsevier, vol. 87(C), pages 65-71.
    33. Cho, Danny I. & Parlar, Mahmut, 1991. "A survey of maintenance models for multi-unit systems," European Journal of Operational Research, Elsevier, vol. 51(1), pages 1-23, March.
    34. repec:dgr:rugggd:gd-87 is not listed on IDEAS
    35. Nancey Green Leigh & Taelim Choi & Nathanael Z. Hoelzel, 2012. "New Insights into Electronic Waste Recycling in Metropolitan Areas," Journal of Industrial Ecology, Yale University, vol. 16(6), pages 940-950, December.
    36. Allwood, Julian M. & Ashby, Michael F. & Gutowski, Timothy G. & Worrell, Ernst, 2011. "Material efficiency: A white paper," Resources, Conservation & Recycling, Elsevier, vol. 55(3), pages 362-381.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Liao, Haolan & Wu, Di & Wang, Yuhan & Lyu, Zeyu & Sun, Hongmei & Nie, Yongyou & He, He, 2022. "Impacts of carbon trading mechanism on closed-loop supply chain: A case study of stringer pallet remanufacturing," Socio-Economic Planning Sciences, Elsevier, vol. 81(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tsiliyannis, Christos Aristeides, 2018. "Markov chain modeling and forecasting of product returns in remanufacturing based on stock mean-age," European Journal of Operational Research, Elsevier, vol. 271(2), pages 474-489.
    2. Milovantseva, Natalia & Fitzpatrick, Colin, 2015. "Barriers to electronics reuse of transboundary e-waste shipment regulations: An evaluation based on industry experiences," Resources, Conservation & Recycling, Elsevier, vol. 102(C), pages 170-177.
    3. Pauliuk, Stefan & Kondo, Yasushi & Nakamura, Shinichiro & Nakajima, Kenichi, 2017. "Regional distribution and losses of end-of-life steel throughout multiple product life cycles—Insights from the global multiregional MaTrace model," Resources, Conservation & Recycling, Elsevier, vol. 116(C), pages 84-93.
    4. Moura, J.M.B.M. & Gohr Pinheiro, I. & Lischeski, D. & Valle, J.A.B., 2017. "Relation of Brazilian institutional users and technical assistances with electronics and their waste: What has changed?," Resources, Conservation & Recycling, Elsevier, vol. 127(C), pages 68-75.
    5. Parajuly, Keshav & Habib, Komal & Liu, Gang, 2017. "Waste electrical and electronic equipment (WEEE) in Denmark: Flows, quantities and management," Resources, Conservation & Recycling, Elsevier, vol. 123(C), pages 85-92.
    6. Chunyan Wang & Yi Liu & Wei‐Qiang Chen & Bing Zhu & Shen Qu & Ming Xu, 2021. "Critical review of global plastics stock and flow data," Journal of Industrial Ecology, Yale University, vol. 25(5), pages 1300-1317, October.
    7. Barbara V. Kasulaitis & Callie W. Babbitt & Andrew K. Krock, 2019. "Dematerialization and the Circular Economy: Comparing Strategies to Reduce Material Impacts of the Consumer Electronic Product Ecosystem," Journal of Industrial Ecology, Yale University, vol. 23(1), pages 119-132, February.
    8. Kalmykova, Yuliya & Berg, Per E.-O. & Patrício, João & Lisovskaja, Vera, 2017. "Portable battery lifespans and new estimation method for battery collection rate based on a lifespan modeling approach," Resources, Conservation & Recycling, Elsevier, vol. 120(C), pages 65-74.
    9. Dirk Lauinger & Romain G. Billy & Felipe Vásquez & Daniel B. Müller, 2021. "A general framework for stock dynamics of populations and built and natural environments," Journal of Industrial Ecology, Yale University, vol. 25(5), pages 1136-1146, October.
    10. Till Zimmermann & Stefan Gößling-Reisemann, 2014. "Recycling Potentials of Critical Metals-Analyzing Secondary Flows from Selected Applications," Resources, MDPI, vol. 3(1), pages 1-28, March.
    11. Tulga Mendjargal & Eiji Yamasue & Hiroki Tanikawa, 2022. "Estimation of the Lifespan of Imported Passenger Vehicles in Mongolia," Sustainability, MDPI, vol. 14(21), pages 1-16, November.
    12. Agrawal, Saurabh & Singh, Rajesh K. & Murtaza, Qasim, 2015. "A literature review and perspectives in reverse logistics," Resources, Conservation & Recycling, Elsevier, vol. 97(C), pages 76-92.
    13. Marta Royo & Vicente Chulvi & Elena Mulet & Laura Ruiz‐Pastor, 2023. "Analysis of parameters about useful life extension in 70 tools and methods related to eco‐design and circular economy," Journal of Industrial Ecology, Yale University, vol. 27(2), pages 562-586, April.
    14. Yuya Nakamoto, 2017. "CO2 reduction potentials through the market expansion and lifetime extension of used cars," Journal of Economic Structures, Springer;Pan-Pacific Association of Input-Output Studies (PAPAIOS), vol. 6(1), pages 1-14, December.
    15. Liu, Wenjie & Liu, Wei & Shen, Ningning & Xu, Zhitao & Xie, Naiming & Chen, Jian & Zhou, Huiyu, 2022. "Pricing and collection decisions of a closed-loop supply chain with fuzzy demand," International Journal of Production Economics, Elsevier, vol. 245(C).
    16. Patricia van Loon & Luk N. Van Wassenhove & Ales Mihelic, 2022. "Designing a circular business strategy: 7 years of evolution at a large washing machine manufacturer," Business Strategy and the Environment, Wiley Blackwell, vol. 31(3), pages 1030-1041, March.
    17. de Brito, Marisa P. & Dekker, Rommert, 2003. "Modelling product returns in inventory control--exploring the validity of general assumptions," International Journal of Production Economics, Elsevier, vol. 81(1), pages 225-241, January.
    18. Yoshida, Aya & Terazono, Atsushi & Ballesteros, Florencio C. & Nguyen, Duc-Quang & Sukandar, Sunandar & Kojima, Michikazu & Sakata, Shozo, 2016. "E-waste recycling processes in Indonesia, the Philippines, and Vietnam: A case study of cathode ray tube TVs and monitors," Resources, Conservation & Recycling, Elsevier, vol. 106(C), pages 48-58.
    19. Ardente, Fulvio & Mathieux, Fabrice & Recchioni, Marco, 2014. "Recycling of electronic displays: Analysis of pre-processing and potential ecodesign improvements," Resources, Conservation & Recycling, Elsevier, vol. 92(C), pages 158-171.
    20. Edgar Battand Towa Kouokam & Vanessa Zeller & Wouter Achten, 2019. "Input-output models and waste management analysis: A critical review," ULB Institutional Repository 2013/359535, ULB -- Universite Libre de Bruxelles.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore:v:103:y:2015:i:c:p:155-170. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.