IDEAS home Printed from https://ideas.repec.org/a/eee/recore/v92y2014icp158-171.html
   My bibliography  Save this article

Recycling of electronic displays: Analysis of pre-processing and potential ecodesign improvements

Author

Listed:
  • Ardente, Fulvio
  • Mathieux, Fabrice
  • Recchioni, Marco

Abstract

This article analyses the current and future end-of-life management of electronic displays (flat screen televisions and monitors), and identifies and discusses possible ecodesign recommendations to improve it. Based on an investigation of the treatment of displays in two typical European recycling plants, key aspects and criticalities of the recycling methods (sorting, dismantling and pre-processing) are identified. Disaggregated data concerning on-site measurements of the time needed to manually dismantle different displays are presented. The article also discusses the potential evolution of end-of-life scenarios for electronic displays and suggests possible recommendations for recyclers, producers and policy-makers to promote resource efficiency in the recycling of such waste products. Data on time for dismantling the displays can be used to build measurers for voluntary and mandatory policies, to stimulate design innovations for products improvement, and to assess possible alternative treatments of the waste during the pre-processing at the recycling plants. Some quantitative product measures (based on the time thresholds for dismantling some key components) are also discussed, including an assessment of their economic viability. These measures can potentially be enforced through mandatory and voluntary European product policies, and could also be extended to other product groups.

Suggested Citation

  • Ardente, Fulvio & Mathieux, Fabrice & Recchioni, Marco, 2014. "Recycling of electronic displays: Analysis of pre-processing and potential ecodesign improvements," Resources, Conservation & Recycling, Elsevier, vol. 92(C), pages 158-171.
    • Handle: RePEc:eee:recore:v:92:y:2014:i:c:p:158-171
    DOI: 10.1016/j.resconrec.2014.09.005
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0921344914001955
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resconrec.2014.09.005?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Peeters, Jef R. & Vanegas, Paul & Tange, Lein & Van Houwelingen, Jan & Duflou, Joost R., 2014. "Closed loop recycling of plastics containing Flame Retardants," Resources, Conservation & Recycling, Elsevier, vol. 84(C), pages 35-43.
    2. Perrine Chancerel & Christina E.M. Meskers & Christian Hagelüken & Vera Susanne Rotter, 2009. "Assessment of Precious Metal Flows During Preprocessing of Waste Electrical and Electronic Equipment," Journal of Industrial Ecology, Yale University, vol. 13(5), pages 791-810, October.
    3. Aizawa, Hirofumi & Yoshida, Hideto & Sakai, Shin-ichi, 2008. "Current results and future perspectives for Japanese recycling of home electrical appliances," Resources, Conservation & Recycling, Elsevier, vol. 52(12), pages 1399-1410.
    4. Bouvier, Rachel & Wagner, Travis, 2011. "The influence of collection facility attributes on household collection rates of electronic waste: The case of televisions and computer monitors," Resources, Conservation & Recycling, Elsevier, vol. 55(11), pages 1051-1059.
    5. Yang, Jiping & Xiang, Dong & Wang, Jinsong & Duan, Guanghong & Zhang, Hong-chao, 2009. "Removal force models for component disassembly from waste printed circuit board," Resources, Conservation & Recycling, Elsevier, vol. 53(8), pages 448-454.
    6. Yu, Jinglei & Williams, Eric & Ju, Meiting & Shao, Chaofeng, 2010. "Managing e-waste in China: Policies, pilot projects and alternative approaches," Resources, Conservation & Recycling, Elsevier, vol. 54(11), pages 991-999.
    7. Allwood, Julian M. & Ashby, Michael F. & Gutowski, Timothy G. & Worrell, Ernst, 2011. "Material efficiency: A white paper," Resources, Conservation & Recycling, Elsevier, vol. 55(3), pages 362-381.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhang, Kaihua & Wu, Yufeng & Wang, Wei & Li, Bin & Zhang, Yinan & Zuo, Tieyong, 2015. "Recycling indium from waste LCDs: A review," Resources, Conservation & Recycling, Elsevier, vol. 104(PA), pages 276-290.
    2. Milovantseva, Natalia & Fitzpatrick, Colin, 2015. "Barriers to electronics reuse of transboundary e-waste shipment regulations: An evaluation based on industry experiences," Resources, Conservation & Recycling, Elsevier, vol. 102(C), pages 170-177.
    3. Tsiliyannis, Christos Aristeides, 2015. "Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 155-170.
    4. Yoshida, Aya & Terazono, Atsushi & Ballesteros, Florencio C. & Nguyen, Duc-Quang & Sukandar, Sunandar & Kojima, Michikazu & Sakata, Shozo, 2016. "E-waste recycling processes in Indonesia, the Philippines, and Vietnam: A case study of cathode ray tube TVs and monitors," Resources, Conservation & Recycling, Elsevier, vol. 106(C), pages 48-58.
    5. Parajuly, Keshav & Habib, Komal & Liu, Gang, 2017. "Waste electrical and electronic equipment (WEEE) in Denmark: Flows, quantities and management," Resources, Conservation & Recycling, Elsevier, vol. 123(C), pages 85-92.
    6. Sabbaghi, Mostafa & Cade, Willie & Behdad, Sara & Bisantz, Ann M., 2017. "The current status of the consumer electronics repair industry in the U.S.: A survey-based study," Resources, Conservation & Recycling, Elsevier, vol. 116(C), pages 137-151.
    7. Habib Al Razi, Khandakar Md, 2016. "Resourceful recycling process of waste desktop computers: A review study," Resources, Conservation & Recycling, Elsevier, vol. 110(C), pages 30-47.
    8. Ardente, Fulvio & Calero Pastor, Maria & Mathieux, Fabrice & Talens Peiró, Laura, 2015. "Analysis of end-of-life treatments of commercial refrigerating appliances: Bridging product and waste policies," Resources, Conservation & Recycling, Elsevier, vol. 101(C), pages 42-52.
    9. Alonso Movilla, Natalia & Zwolinski, Peggy & Dewulf, Jo & Mathieux, Fabrice, 2016. "A method for manual disassembly analysis to support the ecodesign of electronic displays," Resources, Conservation & Recycling, Elsevier, vol. 114(C), pages 42-58.
    10. Chancerel, Perrine & Marwede, Max & Nissen, Nils F. & Lang, Klaus-Dieter, 2015. "Estimating the quantities of critical metals embedded in ICT and consumer equipment," Resources, Conservation & Recycling, Elsevier, vol. 98(C), pages 9-18.
    11. Shi, Jingjing & Li, Qiang & Li, Huiquan & Li, Shaopeng & Zhang, Jianbo & Shi, Yao, 2017. "Eco-design for recycled products: Rejuvenating mullite from coal fly ash," Resources, Conservation & Recycling, Elsevier, vol. 124(C), pages 67-73.
    12. Cheung, Wai Ming & Pachisia, Vedant, 2015. "Facilitating waste paper recycling and repurposing via cost modelling of machine failure, labour availability and waste quantity," Resources, Conservation & Recycling, Elsevier, vol. 101(C), pages 34-41.
    13. Ruiz-Mercado, Gerardo J. & Gonzalez, Michael A. & Smith, Raymond L. & Meyer, David E., 2017. "A conceptual chemical process for the recycling of Ce, Eu, and Y from LED flat panel displays," Resources, Conservation & Recycling, Elsevier, vol. 126(C), pages 42-49.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yoshida, Aya & Terazono, Atsushi & Ballesteros, Florencio C. & Nguyen, Duc-Quang & Sukandar, Sunandar & Kojima, Michikazu & Sakata, Shozo, 2016. "E-waste recycling processes in Indonesia, the Philippines, and Vietnam: A case study of cathode ray tube TVs and monitors," Resources, Conservation & Recycling, Elsevier, vol. 106(C), pages 48-58.
    2. Tsiliyannis, Christos Aristeides, 2015. "Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 155-170.
    3. Dou, Yijie & Sarkis, Joseph, 2013. "A multiple stakeholder perspective on barriers to implementing China RoHS regulations," Resources, Conservation & Recycling, Elsevier, vol. 81(C), pages 92-104.
    4. Van Eygen, Emile & Feketitsch, Julia & Laner, David & Rechberger, Helmut & Fellner, Johann, 2017. "Comprehensive analysis and quantification of national plastic flows: The case of Austria," Resources, Conservation & Recycling, Elsevier, vol. 117(PB), pages 183-194.
    5. Friedrich A. Halstenberg & Kai Lindow & Rainer Stark, 2019. "Leveraging Circular Economy through a Methodology for Smart Service Systems Engineering," Sustainability, MDPI, vol. 11(13), pages 1-36, June.
    6. Zhang, Kaihua & Wu, Yufeng & Wang, Wei & Li, Bin & Zhang, Yinan & Zuo, Tieyong, 2015. "Recycling indium from waste LCDs: A review," Resources, Conservation & Recycling, Elsevier, vol. 104(PA), pages 276-290.
    7. Lynda Andeobu & Santoso Wibowo & Srimannarayana Grandhi, 2021. "A Systematic Review of E-Waste Generation and Environmental Management of Asia Pacific Countries," IJERPH, MDPI, vol. 18(17), pages 1-18, August.
    8. Ardente, Fulvio & Calero Pastor, Maria & Mathieux, Fabrice & Talens Peiró, Laura, 2015. "Analysis of end-of-life treatments of commercial refrigerating appliances: Bridging product and waste policies," Resources, Conservation & Recycling, Elsevier, vol. 101(C), pages 42-52.
    9. Taelim Choi & Randall W. Jackson & Nancey Green Leigh & Christa D. Jensen, 2011. "A Baseline Input—Output Model with Environmental Accounts (IOEA) Applied to E-Waste Recycling," International Regional Science Review, , vol. 34(1), pages 3-33, January.
    10. Milovantseva, Natalia & Fitzpatrick, Colin, 2015. "Barriers to electronics reuse of transboundary e-waste shipment regulations: An evaluation based on industry experiences," Resources, Conservation & Recycling, Elsevier, vol. 102(C), pages 170-177.
    11. Mallawarachchi, Harshani & Karunasena, Gayani, 2012. "Electronic and electrical waste management in Sri Lanka: Suggestions for national policy enhancements," Resources, Conservation & Recycling, Elsevier, vol. 68(C), pages 44-53.
    12. Yuancheng Lin & Honghua Yang & Linwei Ma & Zheng Li & Weidou Ni, 2021. "Low-Carbon Development for the Iron and Steel Industry in China and the World: Status Quo, Future Vision, and Key Actions," Sustainability, MDPI, vol. 13(22), pages 1-28, November.
    13. Isaac Lyatuu & Georg Loss & Andrea Farnham & Goodluck W. Lyatuu & Günther Fink & Mirko S. Winkler, 2021. "Associations between Natural Resource Extraction and Incidence of Acute and Chronic Health Conditions: Evidence from Tanzania," IJERPH, MDPI, vol. 18(11), pages 1-12, June.
    14. Leonidas Milios, 2021. "Towards a Circular Economy Taxation Framework: Expectations and Challenges of Implementation," Circular Economy and Sustainability,, Springer.
    15. Ghodeswar, Archana & Oliver, Matthew E., 2022. "Trading one waste for another? Unintended consequences of fly ash reuse in the Indian electric power sector," Energy Policy, Elsevier, vol. 165(C).
    16. Dhar, Subash & Pathak, Minal & Shukla, Priyadarshi R., 2020. "Transformation of India's steel and cement industry in a sustainable 1.5 °C world," Energy Policy, Elsevier, vol. 137(C).
    17. Ruth Lane, 2014. "Understanding the Dynamic Character of Value in Recycling Metals from Australia," Resources, MDPI, vol. 3(2), pages 1-16, April.
    18. Horațiu Vermeșan & Ancuța-Elena Tiuc & Marius Purcar, 2019. "Advanced Recovery Techniques for Waste Materials from IT and Telecommunication Equipment Printed Circuit Boards," Sustainability, MDPI, vol. 12(1), pages 1-23, December.
    19. Mariale Moreno & Carolina De los Rios & Zoe Rowe & Fiona Charnley, 2016. "A Conceptual Framework for Circular Design," Sustainability, MDPI, vol. 8(9), pages 1-15, September.
    20. Colin M. Rose & Julia A. Stegemann, 2018. "From Waste Management to Component Management in the Construction Industry," Sustainability, MDPI, vol. 10(1), pages 1-21, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore:v:92:y:2014:i:c:p:158-171. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.