IDEAS home Printed from https://ideas.repec.org/a/eee/recore/v102y2015icp170-177.html
   My bibliography  Save this article

Barriers to electronics reuse of transboundary e-waste shipment regulations: An evaluation based on industry experiences

Author

Listed:
  • Milovantseva, Natalia
  • Fitzpatrick, Colin

Abstract

In our globalized economy, increasing volumes of used electronics are shipped across national borders. While global and regional regulations prioritize electronics reuse as a prudent approach for conserving resources and reducing environmental toxicity, their effect on cross-border shipping activities of the reuse industry is not well-known. This study analyzes data from nine cases collected in 2012–13 via interviews and a survey of reuse organizations to identify the effects of these regulations on transboundary reuse activities, which respondents perceive as barriers to electronics reuse. Overall, three broad areas were identified in which regulations may directly influence the reuse organizations that participated in this study: (i) definitions, classification, operating procedures, and enforcement; (ii) evaluation of shipments; and (iii) requirement for functionality testing. These findings suggest that, contrary to the goal of encouraging reuse of discarded electrical and electronic equipment, in some cases regulations may be contributing to raising barriers for reuse organizations’ business. To help eliminate these barriers, policy recommendations proposed in this paper include: appropriate legislative amendments; inclusion of issues related to reuse in the development of relevant national policies; establishment of a comprehensive international legislative database; creation of refurbishment operations close to the install base and integration of informal recyclers in the reuse sector; and an introduction of a regulated green e-waste transboundary channel.

Suggested Citation

  • Milovantseva, Natalia & Fitzpatrick, Colin, 2015. "Barriers to electronics reuse of transboundary e-waste shipment regulations: An evaluation based on industry experiences," Resources, Conservation & Recycling, Elsevier, vol. 102(C), pages 170-177.
    • Handle: RePEc:eee:recore:v:102:y:2015:i:c:p:170-177
    DOI: 10.1016/j.resconrec.2015.07.027
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0921344915300604
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resconrec.2015.07.027?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kasulaitis, Barbara V. & Babbitt, Callie W. & Kahhat, Ramzy & Williams, Eric & Ryen, Erinn G., 2015. "Evolving materials, attributes, and functionality in consumer electronics: Case study of laptop computers," Resources, Conservation & Recycling, Elsevier, vol. 100(C), pages 1-10.
    2. Robert J. Alexander, 1967. "The Import-Substitution Strategy of Economic Development," Journal of Economic Issues, Taylor & Francis Journals, vol. 1(4), pages 297-308, December.
    3. Estrada-Ayub, Jesús. A. & Kahhat, Ramzy, 2014. "Decision factors for e-waste in Northern Mexico: To waste or trade," Resources, Conservation & Recycling, Elsevier, vol. 86(C), pages 93-106.
    4. Manomaivibool, Panate & Hong, Jong Ho, 2014. "Two decades, three WEEE systems: How far did EPR evolve in Korea's resource circulation policy?," Resources, Conservation & Recycling, Elsevier, vol. 83(C), pages 202-212.
    5. Perrine Chancerel & Christina E.M. Meskers & Christian Hagelüken & Vera Susanne Rotter, 2009. "Assessment of Precious Metal Flows During Preprocessing of Waste Electrical and Electronic Equipment," Journal of Industrial Ecology, Yale University, vol. 13(5), pages 791-810, October.
    6. Çetinsaya Özkır, Vildan & Efendigil, Tuğba & Demirel, Tufan & Çetin Demirel, Nihan & Deveci, Muhammet & Topçu, Burak, 2015. "A three-stage methodology for initiating an effective management system for electronic waste in Turkey," Resources, Conservation & Recycling, Elsevier, vol. 96(C), pages 61-70.
    7. Kissling, Ramon & Coughlan, Damian & Fitzpatrick, Colin & Boeni, Heinz & Luepschen, Claudia & Andrew, Stefan & Dickenson, John, 2013. "Success factors and barriers in re-use of electrical and electronic equipment," Resources, Conservation & Recycling, Elsevier, vol. 80(C), pages 21-31.
    8. Kissling, Ramon & Fitzpatrick, Colin & Boeni, Heinz & Luepschen, Claudia & Andrew, Stefan & Dickenson, John, 2012. "Definition of generic re-use operating models for electrical and electronic equipment," Resources, Conservation & Recycling, Elsevier, vol. 65(C), pages 85-99.
    9. Cox, Jayne & Griffith, Sarah & Giorgi, Sara & King, Geoff, 2013. "Consumer understanding of product lifetimes," Resources, Conservation & Recycling, Elsevier, vol. 79(C), pages 21-29.
    10. Ardente, Fulvio & Mathieux, Fabrice & Recchioni, Marco, 2014. "Recycling of electronic displays: Analysis of pre-processing and potential ecodesign improvements," Resources, Conservation & Recycling, Elsevier, vol. 92(C), pages 158-171.
    11. Dwivedy, Maheshwar & Suchde, Pratik & Mittal, R.K., 2015. "Modeling and assessment of e-waste take-back strategies in India," Resources, Conservation & Recycling, Elsevier, vol. 96(C), pages 11-18.
    12. Ylä-Mella, Jenni & Poikela, Kari & Lehtinen, Ulla & Keiski, Riitta L. & Pongrácz, Eva, 2014. "Implementation of Waste Electrical and Electronic Equipment Directive in Finland: Evaluation of the collection network and challenges of the effective WEEE management," Resources, Conservation & Recycling, Elsevier, vol. 86(C), pages 38-46.
    13. Paiano, Annarita & Lagioia, Giovanni & Cataldo, Andrea, 2013. "A critical analysis of the sustainability of mobile phone use," Resources, Conservation & Recycling, Elsevier, vol. 73(C), pages 162-171.
    14. Kilic, Huseyin Selcuk & Cebeci, Ufuk & Ayhan, Mustafa Batuhan, 2015. "Reverse logistics system design for the waste of electrical and electronic equipment (WEEE) in Turkey," Resources, Conservation & Recycling, Elsevier, vol. 95(C), pages 120-132.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xavier, Lúcia Helena & Giese, Ellen Cristine & Ribeiro-Duthie, Ana Cristina & Lins, Fernando Antonio Freitas, 2021. "Sustainability and the circular economy: A theoretical approach focused on e-waste urban mining," Resources Policy, Elsevier, vol. 74(C).
    2. Sugimura, Yoshihisa & Murakami, Shinsuke, 2016. "Problems in Japan’s governance system related to end-of-life electrical and electronic equipment trade," Resources, Conservation & Recycling, Elsevier, vol. 112(C), pages 93-106.
    3. Wang, Zhen & Duan, Yongrui & Huo, Jiazhen, 2022. "The impact of government intervention measures on recycling of waste electrical and electronic equipment in China considering consumer decision," Energy Policy, Elsevier, vol. 160(C).
    4. Sabbaghi, Mostafa & Cade, Willie & Behdad, Sara & Bisantz, Ann M., 2017. "The current status of the consumer electronics repair industry in the U.S.: A survey-based study," Resources, Conservation & Recycling, Elsevier, vol. 116(C), pages 137-151.
    5. An, Da & Yang, Yu & Chai, Xilong & Xi, Beidou & Dong, Lichun & Ren, Jingzheng, 2015. "Mitigating pollution of hazardous materials from WEEE of China: Portfolio selection for a sustainable future based on multi-criteria decision making," Resources, Conservation & Recycling, Elsevier, vol. 105(PA), pages 198-210.
    6. Mostafa Pazoki & Hamed Samarghandi & Mehdi Behroozi, 2023. "Increasing Supply Chain Resiliency Through Equilibrium Pricing and Stipulating Transportation Quota Regulation," Papers 2308.00681, arXiv.org, revised Oct 2023.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tsiliyannis, Christos Aristeides, 2015. "Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 155-170.
    2. Moura, J.M.B.M. & Gohr Pinheiro, I. & Lischeski, D. & Valle, J.A.B., 2017. "Relation of Brazilian institutional users and technical assistances with electronics and their waste: What has changed?," Resources, Conservation & Recycling, Elsevier, vol. 127(C), pages 68-75.
    3. Borthakur, Anwesha & Govind, Madhav, 2017. "Emerging trends in consumers’ E-waste disposal behaviour and awareness: A worldwide overview with special focus on India," Resources, Conservation & Recycling, Elsevier, vol. 117(PB), pages 102-113.
    4. Sabbaghi, Mostafa & Cade, Willie & Behdad, Sara & Bisantz, Ann M., 2017. "The current status of the consumer electronics repair industry in the U.S.: A survey-based study," Resources, Conservation & Recycling, Elsevier, vol. 116(C), pages 137-151.
    5. Davis, John-Michael & Garb, Yaakov, 2015. "A model for partnering with the informal e-waste industry: Rationale, principles and a case study," Resources, Conservation & Recycling, Elsevier, vol. 105(PA), pages 73-83.
    6. Yoshida, Aya & Terazono, Atsushi & Ballesteros, Florencio C. & Nguyen, Duc-Quang & Sukandar, Sunandar & Kojima, Michikazu & Sakata, Shozo, 2016. "E-waste recycling processes in Indonesia, the Philippines, and Vietnam: A case study of cathode ray tube TVs and monitors," Resources, Conservation & Recycling, Elsevier, vol. 106(C), pages 48-58.
    7. Agamuthu, P. & Kasapo, Pearson & Mohd Nordin, Nurul Ain, 2015. "E-waste flow among selected institutions of higher learning using material flow analysis model," Resources, Conservation & Recycling, Elsevier, vol. 105(PA), pages 177-185.
    8. Puca, Antonio & Carrano, Marco & Liu, Gengyuan & Musella, Dimitri & Ripa, Maddalena & Viglia, Silvio & Ulgiati, Sergio, 2017. "Energy and eMergy assessment of the production and operation of a personal computer," Resources, Conservation & Recycling, Elsevier, vol. 116(C), pages 124-136.
    9. Lu, Yan & Xu, Zhenming, 2016. "Precious metals recovery from waste printed circuit boards: A review for current status and perspective," Resources, Conservation & Recycling, Elsevier, vol. 113(C), pages 28-39.
    10. Ciro Henrique de Araújo Fernandes & Lucio Camara e Silva & Patricia Guarnieri & Bárbara de Oliveira Vieira, 2021. "Multicriteria Model Proposition to Support the Management of Systems of E-Waste Collection," Logistics, MDPI, vol. 5(3), pages 1-20, September.
    11. Habib Al Razi, Khandakar Md, 2016. "Resourceful recycling process of waste desktop computers: A review study," Resources, Conservation & Recycling, Elsevier, vol. 110(C), pages 30-47.
    12. Alonso Movilla, Natalia & Zwolinski, Peggy & Dewulf, Jo & Mathieux, Fabrice, 2016. "A method for manual disassembly analysis to support the ecodesign of electronic displays," Resources, Conservation & Recycling, Elsevier, vol. 114(C), pages 42-58.
    13. Zhang, Kaihua & Wu, Yufeng & Wang, Wei & Li, Bin & Zhang, Yinan & Zuo, Tieyong, 2015. "Recycling indium from waste LCDs: A review," Resources, Conservation & Recycling, Elsevier, vol. 104(PA), pages 276-290.
    14. Chancerel, Perrine & Marwede, Max & Nissen, Nils F. & Lang, Klaus-Dieter, 2015. "Estimating the quantities of critical metals embedded in ICT and consumer equipment," Resources, Conservation & Recycling, Elsevier, vol. 98(C), pages 9-18.
    15. Dixit, Saumya & Badgaiyan, Anant Jyoti, 2016. "Towards improved understanding of reverse logistics – Examining mediating role of return intention," Resources, Conservation & Recycling, Elsevier, vol. 107(C), pages 115-128.
    16. Ardente, Fulvio & Calero Pastor, Maria & Mathieux, Fabrice & Talens Peiró, Laura, 2015. "Analysis of end-of-life treatments of commercial refrigerating appliances: Bridging product and waste policies," Resources, Conservation & Recycling, Elsevier, vol. 101(C), pages 42-52.
    17. Taelim Choi & Randall W. Jackson & Nancey Green Leigh & Christa D. Jensen, 2011. "A Baseline Input—Output Model with Environmental Accounts (IOEA) Applied to E-Waste Recycling," International Regional Science Review, , vol. 34(1), pages 3-33, January.
    18. Sabbaghi, Mostafa & Behdad, Sara & Zhuang, Jun, 2016. "Managing consumer behavior toward on-time return of the waste electrical and electronic equipment: A game theoretic approach," International Journal of Production Economics, Elsevier, vol. 182(C), pages 545-563.
    19. Ghodeswar, Archana & Oliver, Matthew E., 2022. "Trading one waste for another? Unintended consequences of fly ash reuse in the Indian electric power sector," Energy Policy, Elsevier, vol. 165(C).
    20. Fung, Yi-Ning & Chan, Hau-Ling & Choi, Tsan-Ming & Liu, Rong, 2021. "Sustainable product development processes in fashion: Supply chains structures and classifications," International Journal of Production Economics, Elsevier, vol. 231(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore:v:102:y:2015:i:c:p:170-177. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.