IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v328y2022ics0306261922013757.html
   My bibliography  Save this article

Understanding the impacts of energy efficiency measures on a Company’s operational performance: A new framework

Author

Listed:
  • Cagno, Enrico
  • Accordini, Davide
  • Trianni, Andrea
  • Katic, Mile
  • Ferrari, Nicolò
  • Gambaro, Federico

Abstract

Energy efficiency has long been considered a key component of an industrial company’s competitive repertoire. However, despite the potential benefits of adopting so-called energy efficiency measures, their uptake in such companies remains low. In response, this study proposes a framework aimed at supporting key decision-makers in undertaking a thorough assessment of energy efficiency measures. This involves, on the one hand, providing a complete characterization of a general industrial energy efficiency measure and, on the other, identifying the multiple impacts stemming from its adoption based on a novel performance measurement system that encompasses sustainability features and is defined at the shop floor level. Once theoretically validated through literature, the framework is empirically tested with a heterogeneous sample of Italian companies. The preliminary results demonstrate the framework's ability to thoroughly assess energy efficiency measures, highlighting characteristics and impacts that are sometimes considered more critical than energy saving by industrial decision-makers and therefore able to guide the outcome of the adoption decision.

Suggested Citation

  • Cagno, Enrico & Accordini, Davide & Trianni, Andrea & Katic, Mile & Ferrari, Nicolò & Gambaro, Federico, 2022. "Understanding the impacts of energy efficiency measures on a Company’s operational performance: A new framework," Applied Energy, Elsevier, vol. 328(C).
    • Handle: RePEc:eee:appene:v:328:y:2022:i:c:s0306261922013757
    DOI: 10.1016/j.apenergy.2022.120118
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261922013757
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2022.120118?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. ., 2018. "ERISA moves savings into securities markets," Chapters, in: All Fall Down, chapter 4, pages 34-40, Edward Elgar Publishing.
    2. Ningxuan Kang & Cong Zhao & Jingshan Li & John A. Horst, 2016. "A Hierarchical structure of key performance indicators for operation management and continuous improvement in production systems," International Journal of Production Research, Taylor & Francis Journals, vol. 54(21), pages 6333-6350, November.
    3. Vine, Edward & Mills, Evan & Chen, Allan, 2000. "Energy-efficiency and renewable energy options for risk management and insurance loss reduction," Energy, Elsevier, vol. 25(2), pages 131-147.
    4. Fleiter, Tobias & Hirzel, Simon & Worrell, Ernst, 2012. "The characteristics of energy-efficiency measures – a neglected dimension," Energy Policy, Elsevier, vol. 51(C), pages 502-513.
    5. Lohman, Clemens & Fortuin, Leonard & Wouters, Marc, 2004. "Designing a performance measurement system: A case study," European Journal of Operational Research, Elsevier, vol. 156(2), pages 267-286, July.
    6. Mills, Evan & Kromer, Steve & Weiss, Gary & Mathew, Paul A., 2006. "From volatility to value: analysing and managing financial and performance risk in energy savings projects," Energy Policy, Elsevier, vol. 34(2), pages 188-199, January.
    7. Worrell, Ernst & Price, Lynn, 2001. "Policy scenarios for energy efficiency improvement in industry," Energy Policy, Elsevier, vol. 29(14), pages 1223-1241, November.
    8. Giachetti, Ronald E. & Martinez, Luis D. & Saenz, Oscar A. & Chen, Chin-Sheng, 2003. "Analysis of the structural measures of flexibility and agility using a measurement theoretical framework," International Journal of Production Economics, Elsevier, vol. 86(1), pages 47-62, October.
    9. Hasanuzzaman, M. & Rahim, N.A. & Saidur, R. & Kazi, S.N., 2011. "Energy savings and emissions reductions for rewinding and replacement of industrial motor," Energy, Elsevier, vol. 36(1), pages 233-240.
    10. Saidur, R., 2009. "Energy consumption, energy savings, and emission analysis in Malaysian office buildings," Energy Policy, Elsevier, vol. 37(10), pages 4104-4113, October.
    11. Worrell, Ernst & Laitner, John A & Ruth, Michael & Finman, Hodayah, 2003. "Productivity benefits of industrial energy efficiency measures," Energy, Elsevier, vol. 28(11), pages 1081-1098.
    12. Ghalayini, Alaa M. & Noble, James S. & Crowe, Thomas J., 1997. "An integrated dynamic performance measurement system for improving manufacturing competitiveness," International Journal of Production Economics, Elsevier, vol. 48(3), pages 207-225, February.
    13. Trianni, A. & Cagno, E., 2012. "Dealing with barriers to energy efficiency and SMEs: Some empirical evidences," Energy, Elsevier, vol. 37(1), pages 494-504.
    14. Carlos Herce & Enrico Biele & Chiara Martini & Marcello Salvio & Claudia Toro, 2021. "Impact of Energy Monitoring and Management Systems on the Implementation and Planning of Energy Performance Improved Actions: An Empirical Analysis Based on Energy Audits in Italy," Energies, MDPI, vol. 14(16), pages 1-21, August.
    15. Anderson, Soren T. & Newell, Richard G., 2004. "Information programs for technology adoption: the case of energy-efficiency audits," Resource and Energy Economics, Elsevier, vol. 26(1), pages 27-50, March.
    16. Eric O. Olsen & Peter T. Ward, 2006. "Performance measurement system simplicity," International Journal of Manufacturing Technology and Management, Inderscience Enterprises Ltd, vol. 8(4), pages 330-354.
    17. T.C. Poon & K.L. Choy & H.C.W. Lau, 2007. "A real-time shop floor control system: an integrated RFID approach," International Journal of Enterprise Network Management, Inderscience Enterprises Ltd, vol. 1(4), pages 331-349.
    18. Cagno, E. & Trucco, P. & Trianni, A. & Sala, G., 2010. "Quick-E-scan: A methodology for the energy scan of SMEs," Energy, Elsevier, vol. 35(5), pages 1916-1926.
    19. Accordini, D. & Cagno, E. & Trianni, A., 2021. "Identification and characterization of decision-making factors over industrial energy efficiency measures in electric motor systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    20. Hongjuan Zhang & Lu Ren & Yan Gao & Baoquan Jin, 2017. "A Comprehensive Study of Energy Conservation in Electric-Hydraulic Injection-Molding Equipment," Energies, MDPI, vol. 10(11), pages 1-20, November.
    21. Andrea Trianni & Davide Accordini & Enrico Cagno, 2020. "Identification and Categorization of Factors Affecting the Adoption of Energy Efficiency Measures within Compressed Air Systems," Energies, MDPI, vol. 13(19), pages 1-51, October.
    22. Reuter, Matthias & Patel, Martin K. & Eichhammer, Wolfgang & Lapillonne, Bruno & Pollier, Karine, 2020. "A comprehensive indicator set for measuring multiple benefits of energy efficiency," Energy Policy, Elsevier, vol. 139(C).
    23. Mills, Evan & Rosenfeld, Art, 1996. "Consumer non-energy benefits as a motivation for making energy-efficiency improvements," Energy, Elsevier, vol. 21(7), pages 707-720.
    24. Kalinga Jagoda & Robert Lonseth & Adam Lonseth, 2013. "A bottom‐up approach for productivity measurement and improvement," International Journal of Productivity and Performance Management, Emerald Group Publishing Limited, vol. 62(4), pages 387-406, April.
    25. Lisa Ryan & Nina Campbell, 2012. "Spreading the Net: The Multiple Benefits of Energy Efficiency Improvements," IEA Energy Papers 2012/8, OECD Publishing.
    26. Li, Danny H.W. & Cheung, K.L. & Wong, S.L. & Lam, Tony N.T., 2010. "An analysis of energy-efficient light fittings and lighting controls," Applied Energy, Elsevier, vol. 87(2), pages 558-567, February.
    27. Trianni, Andrea & Cagno, Enrico & Accordini, Davide, 2019. "Energy efficiency measures in electric motors systems: A novel classification highlighting specific implications in their adoption," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    28. Cagno, E. & Worrell, E. & Trianni, A. & Pugliese, G., 2013. "A novel approach for barriers to industrial energy efficiency," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 290-308.
    29. Nehler, Therese, 2018. "Linking energy efficiency measures in industrial compressed air systems with non-energy benefits – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 89(C), pages 72-87.
    30. Trianni, Andrea & Cagno, Enrico & De Donatis, Alessio, 2014. "A framework to characterize energy efficiency measures," Applied Energy, Elsevier, vol. 118(C), pages 207-220.
    31. Rohdin, Patrik & Thollander, Patrik & Solding, Petter, 2007. "Barriers to and drivers for energy efficiency in the Swedish foundry industry," Energy Policy, Elsevier, vol. 35(1), pages 672-677, January.
    32. Therese Nehler, 2018. "A Systematic Literature Review of Methods for Improved Utilisation of the Non-Energy Benefits of Industrial Energy Efficiency," Energies, MDPI, vol. 11(12), pages 1-27, November.
    33. Gunasekaran, A. & Patel, C. & McGaughey, Ronald E., 2004. "A framework for supply chain performance measurement," International Journal of Production Economics, Elsevier, vol. 87(3), pages 333-347, February.
    34. Trianni, Andrea & Cagno, Enrico & Worrell, Ernst & Pugliese, Giacomo, 2013. "Empirical investigation of energy efficiency barriers in Italian manufacturing SMEs," Energy, Elsevier, vol. 49(C), pages 444-458.
    35. Saidur, R. & Mekhilef, S., 2010. "Energy use, energy savings and emission analysis in the Malaysian rubber producing industries," Applied Energy, Elsevier, vol. 87(8), pages 2746-2758, August.
    36. Joel D. Goldhar & Mariann Jelinek, 1985. "Computer Integrated Flexible Manufacturing: Organizational, Economic, and Strategic Implications," Interfaces, INFORMS, vol. 15(3), pages 94-105, June.
    37. Zhang, Shaohui & Worrell, Ernst & Crijns-Graus, Wina & Wagner, Fabian & Cofala, Janusz, 2014. "Co-benefits of energy efficiency improvement and air pollution abatement in the Chinese iron and steel industry," Energy, Elsevier, vol. 78(C), pages 333-345.
    38. Sandberg, Peter & Soderstrom, Mats, 2003. "Industrial energy efficiency: the need for investment decision support from a manager perspective," Energy Policy, Elsevier, vol. 31(15), pages 1623-1634, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Marta Daroń & Monika Górska, 2023. "Relationships between Selected Quality Tools and Energy Efficiency in Production Processes," Energies, MDPI, vol. 16(13), pages 1-20, June.
    2. Armenia Androniceanu & Ioana-Catalina Enache & Elena-Narcisa Valter & Florin-Felix Raduica, 2023. "Increasing Energy Efficiency Based on the Kaizen Approach," Energies, MDPI, vol. 16(4), pages 1-24, February.
    3. Carlos Herce & Chiara Martini & Claudia Toro & Enrico Biele & Marcello Salvio, 2024. "Energy Efficiency Policies for Small and Medium-Sized Enterprises: A Review," Sustainability, MDPI, vol. 16(3), pages 1-34, January.
    4. Florinda F. Martins & Hélio Castro & Miroslava Smitková & Carlos Felgueiras & Nídia Caetano, 2024. "Energy and Circular Economy: Nexus beyond Concepts," Sustainability, MDPI, vol. 16(5), pages 1-19, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Accordini, D. & Cagno, E. & Trianni, A., 2021. "Identification and characterization of decision-making factors over industrial energy efficiency measures in electric motor systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    2. Andrea Trianni & Davide Accordini & Enrico Cagno, 2020. "Identification and Categorization of Factors Affecting the Adoption of Energy Efficiency Measures within Compressed Air Systems," Energies, MDPI, vol. 13(19), pages 1-51, October.
    3. Trianni, Andrea & Cagno, Enrico & De Donatis, Alessio, 2014. "A framework to characterize energy efficiency measures," Applied Energy, Elsevier, vol. 118(C), pages 207-220.
    4. Fábio de Oliveira Neves & Henrique Ewbank & José Arnaldo Frutuoso Roveda & Andrea Trianni & Fernando Pinhabel Marafão & Sandra Regina Monteiro Masalskiene Roveda, 2022. "Economic and Production-Related Implications for Industrial Energy Efficiency: A Logistic Regression Analysis on Cross-Cutting Technologies," Energies, MDPI, vol. 15(4), pages 1-19, February.
    5. Monjurul Hasan, A S M & Trianni, Andrea & Shukla, Nagesh & Katic, Mile, 2022. "A novel characterization based framework to incorporate industrial energy management services," Applied Energy, Elsevier, vol. 313(C).
    6. Trianni, Andrea & Cagno, Enrico & Accordini, Davide, 2019. "Energy efficiency measures in electric motors systems: A novel classification highlighting specific implications in their adoption," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    7. Trianni, Andrea & Cagno, Enrico & Farné, Stefano, 2016. "Barriers, drivers and decision-making process for industrial energy efficiency: A broad study among manufacturing small and medium-sized enterprises," Applied Energy, Elsevier, vol. 162(C), pages 1537-1551.
    8. Trianni, Andrea & Cagno, Enrico & Worrell, Ernst, 2013. "Innovation and adoption of energy efficient technologies: An exploratory analysis of Italian primary metal manufacturing SMEs," Energy Policy, Elsevier, vol. 61(C), pages 430-440.
    9. Thollander, Patrik & Backlund, Sandra & Trianni, Andrea & Cagno, Enrico, 2013. "Beyond barriers – A case study on driving forces for improved energy efficiency in the foundry industries in Finland, France, Germany, Italy, Poland, Spain, and Sweden," Applied Energy, Elsevier, vol. 111(C), pages 636-643.
    10. Apriani Soepardi & Pratikto Pratikto & Purnomo Budi Santoso & Ishardita Pambudi Tama & Patrik Thollander, 2018. "Linking of Barriers to Energy Efficiency Improvement in Indonesia’s Steel Industry," Energies, MDPI, vol. 11(1), pages 1-22, January.
    11. Olsthoorn, Mark & Schleich, Joachim & Hirzel, Simon, 2017. "Adoption of Energy Efficiency Measures for Non-residential Buildings: Technological and Organizational Heterogeneity in the Trade, Commerce and Services Sector," Ecological Economics, Elsevier, vol. 136(C), pages 240-254.
    12. Perroni, Marcos G. & Gouvea da Costa, Sergio E. & Pinheiro de Lima, Edson & Vieira da Silva, Wesley, 2017. "The relationship between enterprise efficiency in resource use and energy efficiency practices adoption," International Journal of Production Economics, Elsevier, vol. 190(C), pages 108-119.
    13. Daniela Artemisa Calu & Adriana Ana Maria Davidescu & Alina Mihaela Irimescu & Corina-Graziella Batca Dumitru & Viorel Avram, 2023. "Implementation of Energy Efficiency Improvement Measures in Romania and the Role of Professional Accountants," The AMFITEATRU ECONOMIC journal, Academy of Economic Studies - Bucharest, Romania, vol. 25(63), pages 479-479, April.
    14. Olsthoorn, Mark & Schleich, Joachim & Klobasa, Marian, 2015. "Barriers to electricity load shift in companies: A survey-based exploration of the end-user perspective," Energy Policy, Elsevier, vol. 76(C), pages 32-42.
    15. Therese Nehler, 2018. "A Systematic Literature Review of Methods for Improved Utilisation of the Non-Energy Benefits of Industrial Energy Efficiency," Energies, MDPI, vol. 11(12), pages 1-27, November.
    16. Mette Talseth Solnørdal & Lene Foss, 2018. "Closing the Energy Efficiency Gap—A Systematic Review of Empirical Articles on Drivers to Energy Efficiency in Manufacturing Firms," Energies, MDPI, vol. 11(3), pages 1-30, February.
    17. A S M Monjurul Hasan & Andrea Trianni, 2020. "A Review of Energy Management Assessment Models for Industrial Energy Efficiency," Energies, MDPI, vol. 13(21), pages 1-21, November.
    18. Cagno, E. & Worrell, E. & Trianni, A. & Pugliese, G., 2013. "A novel approach for barriers to industrial energy efficiency," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 290-308.
    19. Fresner Johannes & Krenn Christina & Kleshchov Anton & Tomasi Fabio, 2019. "Exploratory research into energy efficiency investment and strategy," Technology audit and production reserves, 2(46) 2019, Socionet;Technology audit and production reserves, vol. 2(4(46)), pages 16-27.
    20. Cagno, Enrico & Trianni, Andrea, 2013. "Exploring drivers for energy efficiency within small- and medium-sized enterprises: First evidences from Italian manufacturing enterprises," Applied Energy, Elsevier, vol. 104(C), pages 276-285.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:328:y:2022:i:c:s0306261922013757. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.