IDEAS home Printed from https://ideas.repec.org/a/eee/recore/v104y2015ipap68-75.html
   My bibliography  Save this article

Resources saving and emissions reduction of the aluminum industry in China

Author

Listed:
  • Yue, Qiang
  • Wang, Heming
  • Gao, Chengkang
  • Du, Tao
  • Liu, Liying
  • Lu, Zhongwu

Abstract

Primary aluminum production has increased rapidly in China since the year 2000, gaining a 46.0% share of global production in 2014. Primary aluminum production is a process high in energy and materials consumption that also generates much waste. Investigating resource and energy savings and emission reductions in the Chinese aluminum industry is an important and urgent task. Holistic thinking is applied in deriving and analyzing the equations for energy consumption (E), materials consumption (M), and waste emissions (W). Aluminum production per unit GDP (T) is an important parameter influencing E, M, and W; and the historical value of T (including two decomposition factors of T) in China is reviewed first. Based on the equations obtained, the extent of the factors influencing E, M, and W after the year 2000 is analyzed. Then two scenarios (original scheme and recommended scheme) analysis are presented and their respective indices were forecast. From comparisons with USA and Japan, it is found that the recommended scheme can meet aluminum requirements in China if some progress is made. A macroscopic regulation and control network diagram of the aluminum industry is proposed and some parameters are derived from this diagram. From the equations based on these parameters, several ratios among these parameters are identified as the key points that need to be controlled currently in the aluminum industry. Finally, some suggestions are put forward to provide reference points for policy makers.

Suggested Citation

  • Yue, Qiang & Wang, Heming & Gao, Chengkang & Du, Tao & Liu, Liying & Lu, Zhongwu, 2015. "Resources saving and emissions reduction of the aluminum industry in China," Resources, Conservation & Recycling, Elsevier, vol. 104(PA), pages 68-75.
    • Handle: RePEc:eee:recore:v:104:y:2015:i:pa:p:68-75
    DOI: 10.1016/j.resconrec.2015.09.006
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0921344915300835
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resconrec.2015.09.006?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Lin, Boqiang & Zhang, Guoliang, 2013. "Estimates of electricity saving potential in Chinese nonferrous metals industry," Energy Policy, Elsevier, vol. 60(C), pages 558-568.
    2. Lin, Boqiang & Xu, Lin, 2015. "Energy conservation of electrolytic aluminum industry in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 676-686.
    3. Guo, Z.C. & Fu, Z.X., 2010. "Current situation of energy consumption and measures taken for energy saving in the iron and steel industry in China," Energy, Elsevier, vol. 35(11), pages 4356-4360.
    4. Dutta, Monica & Mukherjee, Saptarshi, 2010. "An outlook into energy consumption in large scale industries in India: The cases of steel, aluminium and cement," Energy Policy, Elsevier, vol. 38(11), pages 7286-7298, November.
    5. Enevoldsen, Martin K. & Ryelund, Anders V. & Andersen, Mikael Skou, 2007. "Decoupling of industrial energy consumption and CO2-emissions in energy-intensive industries in Scandinavia," Energy Economics, Elsevier, vol. 29(4), pages 665-692, July.
    6. Hasanbeigi, Ali & Morrow, William & Sathaye, Jayant & Masanet, Eric & Xu, Tengfang, 2013. "A bottom-up model to estimate the energy efficiency improvement and CO2 emission reduction potentials in the Chinese iron and steel industry," Energy, Elsevier, vol. 50(C), pages 315-325.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Eheliyagoda, Disna & Li, Jinhui & Geng, Yong & Zeng, Xianlai, 2022. "The role of China's aluminum recycling on sustainable resource and emission pathways," Resources Policy, Elsevier, vol. 76(C).
    2. Miao, Chenglin & Fang, Debin & Sun, Liyan & Luo, Qiaoling, 2017. "Natural resources utilization efficiency under the influence of green technological innovation," Resources, Conservation & Recycling, Elsevier, vol. 126(C), pages 153-161.
    3. N. Denuwara & A. Kim & V. Atree & P. Newenhisen & C. Gibson & D. Schork & M. Hakovirta, 2022. "Corporate economic performance and sustainability indices: a study based on the Dow Jones Sustainability Index," SN Business & Economics, Springer, vol. 2(7), pages 1-22, July.
    4. Huang, Beijia & Zhao, Juan & Geng, Yong & Tian, Yihui & Jiang, Ping, 2017. "Energy-related GHG emissions of the textile industry in China," Resources, Conservation & Recycling, Elsevier, vol. 119(C), pages 69-77.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xuan, Yanni & Yue, Qiang, 2017. "Scenario analysis on resource and environmental benefits of imported steel scrap for China’s steel industry," Resources, Conservation & Recycling, Elsevier, vol. 120(C), pages 186-198.
    2. An, Runying & Yu, Biying & Li, Ru & Wei, Yi-Ming, 2018. "Potential of energy savings and CO2 emission reduction in China’s iron and steel industry," Applied Energy, Elsevier, vol. 226(C), pages 862-880.
    3. Liu, Yan & Yang, Jian & Wang, Jin & Cheng, Zhi-long & Wang, Qiu-wang, 2014. "Energy and exergy analysis for waste heat cascade utilization in sinter cooling bed," Energy, Elsevier, vol. 67(C), pages 370-380.
    4. Zhou, Kaile & Yang, Shanlin, 2016. "Emission reduction of China׳s steel industry: Progress and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 61(C), pages 319-327.
    5. Gómez, Antonio & Dopazo, César & Fueyo, Norberto, 2014. "The causes of the high energy intensity of the Kazakh economy: A characterization of its energy system," Energy, Elsevier, vol. 71(C), pages 556-568.
    6. Brunke, Jean-Christian & Blesl, Markus, 2014. "A plant-specific bottom-up approach for assessing the cost-effective energy conservation potential and its ability to compensate rising energy-related costs in the German iron and steel industry," Energy Policy, Elsevier, vol. 67(C), pages 431-446.
    7. Lin, Boqiang & Wang, Xiaolei, 2014. "Promoting energy conservation in China's iron & steel sector," Energy, Elsevier, vol. 73(C), pages 465-474.
    8. Lin, Boqiang & Long, Houyin, 2014. "How to promote energy conservation in China’s chemical industry," Energy Policy, Elsevier, vol. 73(C), pages 93-102.
    9. Ke Wang & Linan Che & Chunbo Ma & Yi-Ming Wei, 2017. "The Shadow Price of CO2 Emissions in China's Iron and Steel Industry," CEEP-BIT Working Papers 105, Center for Energy and Environmental Policy Research (CEEP), Beijing Institute of Technology.
    10. Sinha, Rakesh Kumar & Chaturvedi, Nitin Dutt, 2019. "A review on carbon emission reduction in industries and planning emission limits," Renewable and Sustainable Energy Reviews, Elsevier, vol. 114(C), pages 1-1.
    11. Zhang, Shaohui & Worrell, Ernst & Crijns-Graus, Wina & Wagner, Fabian & Cofala, Janusz, 2014. "Co-benefits of energy efficiency improvement and air pollution abatement in the Chinese iron and steel industry," Energy, Elsevier, vol. 78(C), pages 333-345.
    12. Shuangping Wu & Anjun Xu, 2021. "Calculation Method of Energy Saving in Process Engineering: A Case Study of Iron and Steel Production Process," Energies, MDPI, vol. 14(18), pages 1-15, September.
    13. Li, Zhaoling & Dai, Hancheng & Song, Junnian & Sun, Lu & Geng, Yong & Lu, Keyu & Hanaoka, Tatsuya, 2019. "Assessment of the carbon emissions reduction potential of China's iron and steel industry based on a simulation analysis," Energy, Elsevier, vol. 183(C), pages 279-290.
    14. Wu, Junnian & Pu, Guangying & Guo, Yan & Lv, Jingwen & Shang, Jiangwei, 2018. "Retrospective and prospective assessment of exergy, life cycle carbon emissions, and water footprint for coking network evolution in China," Applied Energy, Elsevier, vol. 218(C), pages 479-493.
    15. Wu, Rongxin & Lin, Boqiang, 2021. "Does industrial agglomeration improve effective energy service: An empirical study of China’s iron and steel industry," Applied Energy, Elsevier, vol. 295(C).
    16. Boqiang Lin & Weisheng Liu, 2017. "Scenario Prediction of Energy Consumption and CO 2 Emissions in China’s Machinery Industry," Sustainability, MDPI, vol. 9(1), pages 1-18, January.
    17. Liu, Shangwei & Tian, Xin & Cai, Wenjia & Chen, Weiqiang & Wang, Yafei, 2018. "How the transitions in iron and steel and construction material industries impact China’s CO2 emissions: Comprehensive analysis from an inter-sector linked perspective," Applied Energy, Elsevier, vol. 211(C), pages 64-75.
    18. Chen, Wenying & Yin, Xiang & Ma, Ding, 2014. "A bottom-up analysis of China’s iron and steel industrial energy consumption and CO2 emissions," Applied Energy, Elsevier, vol. 136(C), pages 1174-1183.
    19. Sun, Yongqi & Shen, Hongwei & Wang, Hao & Wang, Xidong & Zhang, Zuotai, 2014. "Experimental investigation and modeling of cooling processes of high temperature slags," Energy, Elsevier, vol. 76(C), pages 761-767.
    20. Kun He & Li Wang & Hongliang Zhu & Yulong Ding, 2018. "Energy-Saving Potential of China’s Steel Industry According to Its Development Plan," Energies, MDPI, vol. 11(4), pages 1-16, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore:v:104:y:2015:i:pa:p:68-75. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.