IDEAS home Printed from https://ideas.repec.org/a/eee/jomega/v102y2021ics0305048320307416.html
   My bibliography  Save this article

Use of a product service system in a competing remanufacturing market

Author

Listed:
  • Xia, Yu
  • Tan, Dan
  • Wang, Bolin

Abstract

The use of product service systems to promote remanufacturing has been long considered. However, customer acceptance of pure product service systems is lower than that of traditional business models. This study examines the environmental and economic impacts of product service systems in a competitive remanufacturing market. To analytically and numerically evaluate three typical types of product service systems, we develop a two-period stylized model to capture the key elements that drive the original equipment manufacturer's strategy choice. Our results show that a product-oriented product service system acts as a coordinating mechanism between the original equipment manufacturer and third-party remanufacturer, resulting in an environmentally friendly product design and increased profit for both firms. Use-oriented and results-oriented product service systems allow the original equipment manufacturer to retain product ownership and deter the third-party remanufacturer's entry, resulting in greater economic and environmental efficiency. Although a results-oriented product service system performs best if customers highly value results-oriented product service systems, it may be less beneficial for the original equipment manufacturer if customers are unaccustomed to paying only for function.

Suggested Citation

  • Xia, Yu & Tan, Dan & Wang, Bolin, 2021. "Use of a product service system in a competing remanufacturing market," Omega, Elsevier, vol. 102(C).
    • Handle: RePEc:eee:jomega:v:102:y:2021:i:c:s0305048320307416
    DOI: 10.1016/j.omega.2020.102387
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0305048320307416
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.omega.2020.102387?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Liu, Xinbao & Yang, Tianji & Pei, Jun & Liao, Haitao & Pohl, Edward A., 2019. "Replacement and inventory control for a multi-customer product service system with decreasing replacement costs," European Journal of Operational Research, Elsevier, vol. 273(2), pages 561-574.
    2. Xue, Dongmei & Teunter, Ruud H. & Zhu, Stuart X. & Zhou, Weihua, 2021. "Entering the high-end market by collecting and remanufacturing a competitor’s high-end cores," Omega, Elsevier, vol. 99(C).
    3. Wu, Cheng-Han, 2012. "Product-design and pricing strategies with remanufacturing," European Journal of Operational Research, Elsevier, vol. 222(2), pages 204-215.
    4. Genovese, Andrea & Acquaye, Adolf A. & Figueroa, Alejandro & Koh, S.C. Lenny, 2017. "Sustainable supply chain management and the transition towards a circular economy: Evidence and some applications," Omega, Elsevier, vol. 66(PB), pages 344-357.
    5. Vishal V. Agrawal & Atalay Atasu & Koert van Ittersum, 2015. "Remanufacturing, Third-Party Competition, and Consumers' Perceived Value of New Products," Management Science, INFORMS, vol. 61(1), pages 60-72, January.
    6. Chen, Mengmiao & Hu, Qiying & Wei, Hang, 2017. "Interaction of after-sales service provider and contract type in a supply chain," International Journal of Production Economics, Elsevier, vol. 193(C), pages 514-527.
    7. Atalay Atasu & Miklos Sarvary & Luk N. Van Wassenhove, 2008. "Remanufacturing as a Marketing Strategy," Management Science, INFORMS, vol. 54(10), pages 1731-1746, October.
    8. Fuqiang Zhang & Renyu Zhang, 2018. "Trade-in Remanufacturing, Customer Purchasing Behavior, and Government Policy," Manufacturing & Service Operations Management, INFORMS, vol. 20(4), pages 601-616, October.
    9. Gaur, Jighyasu & Amini, Mehdi & Rao, A.K., 2017. "Closed-loop supply chain configuration for new and reconditioned products: An integrated optimization model," Omega, Elsevier, vol. 66(PB), pages 212-223.
    10. Ming-Chuan Chiu & Chih-Yuan Chu & Chih-Chuan Chen, 2018. "An integrated product service system modelling methodology with a case study of clothing industry," International Journal of Production Research, Taylor & Francis Journals, vol. 56(6), pages 2388-2409, March.
    11. Gökçe Esenduran & Yen-Ting Lin & Wenli Xiao & Minyue Jin, 2020. "Choice of Electronic Waste Recycling Standard Under Recovery Channel Competition," Manufacturing & Service Operations Management, INFORMS, vol. 22(3), pages 495-512, May.
    12. Ximin (Natalie) Huang & Atalay Atasu & L. Beril Toktay, 2019. "Design Implications of Extended Producer Responsibility for Durable Products," Management Science, INFORMS, vol. 67(6), pages 2573-2590, June.
    13. Barbara Resta & Paolo Gaiardelli & Sergio Cavalieri & Stefano Dotti, 2017. "Enhancing the Design and Management of the Product-Service System Supply Chain: An Application to the Automotive Sector," Service Science, INFORMS, vol. 9(4), pages 302-314, December.
    14. Geraldo Ferrer & Jayashankar M. Swaminathan, 2006. "Managing New and Remanufactured Products," Management Science, INFORMS, vol. 52(1), pages 15-26, January.
    15. Rezapour, Shabnam & Allen, Janet K. & Mistree, Farrokh, 2016. "Reliable product-service supply chains for repairable products," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 95(C), pages 299-321.
    16. Laurens G. Debo & L. Beril Toktay & Luk N. Van Wassenhove, 2005. "Market Segmentation and Product Technology Selection for Remanufacturable Products," Management Science, INFORMS, vol. 51(8), pages 1193-1205, August.
    17. Arnold Tukker, 2004. "Eight types of product–service system: eight ways to sustainability? Experiences from SusProNet," Business Strategy and the Environment, Wiley Blackwell, vol. 13(4), pages 246-260, July.
    18. Fang Tian & Greys Sošić & Laurens Debo, 2019. "Manufacturers’ Competition and Cooperation in Sustainability: Stable Recycling Alliances," Management Science, INFORMS, vol. 65(10), pages 4733-4753, October.
    19. Sojung Kim & Henri Christiaans & Joon Sang Baek, 2019. "Smart Homes as Product-Service Systems: Two Focal Areas for Developing Competitive Smart Home Appliances," Service Science, INFORMS, vol. 11(4), pages 292-310, December.
    20. Franke, C. & Basdere, B. & Ciupek, M. & Seliger, S., 2006. "Remanufacturing of mobile phones--capacity, program and facility adaptation planning," Omega, Elsevier, vol. 34(6), pages 562-570, December.
    21. Mitra, Subrata, 2016. "Models to explore remanufacturing as a competitive strategy under duopoly," Omega, Elsevier, vol. 59(PB), pages 215-227.
    22. Marcus Adam & Jochen Strähle & Matthias Freise, 2017. "The Interaction of Product-Service Systems (PSS) and Corporate Environmental Management (CEM): Can PSS Drive Today’s Fashion Industry Toward More Environmental Sustainability?," Service Science, INFORMS, vol. 9(3), pages 235-249, September.
    23. Dominguez, Roberto & Cannella, Salvatore & Ponte, Borja & Framinan, Jose M., 2020. "On the dynamics of closed-loop supply chains under remanufacturing lead time variability," Omega, Elsevier, vol. 97(C).
    24. Wu, Cheng-Han, 2013. "OEM product design in a price competition with remanufactured product," Omega, Elsevier, vol. 41(2), pages 287-298.
    25. Tseng, Ming-Lang & Lim, Ming K. & Wong, Wai-Peng & Chen, Yi-Chun & Zhan, Yuanzhu, 2018. "A framework for evaluating the performance of sustainable service supply chain management under uncertainty," International Journal of Production Economics, Elsevier, vol. 195(C), pages 359-372.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chen, Pengyu & Liu, Xu & Wang, Qin & Zhou, Pin, 2022. "The Implications of Competition on Strategic Inventories Considering Manufacturer-to-Consumer Rebates," Omega, Elsevier, vol. 107(C).
    2. Niu, Baozhuang & Bao, Jinxiao & Cao, Bin, 2022. "Retailer's make-or-buy decision for remanufactured products under in-house yield uncertainty," Omega, Elsevier, vol. 110(C).
    3. Si, Guojin & Xia, Tangbin & Li, Yaping & Wang, Dong & Chen, Zhen & Pan, Ershun & Xi, Lifeng, 2023. "Resource allocation and maintenance scheduling for distributed multi-center renewable energy systems considering dynamic scope division," Renewable Energy, Elsevier, vol. 217(C).
    4. Chunmei Li & Tianjian Yang & Zijing Bian, 2023. "Does Environmental Education Always Contribute to Remanufacturing Supply Chain Development?," IJERPH, MDPI, vol. 20(6), pages 1-18, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Liao, Haolan & Zhang, Qingyu & Shen, Neng & Nie, Yongyou & Li, Lu, 2021. "Coordination between forward and reverse production streams for maximum profitability," Omega, Elsevier, vol. 104(C).
    2. Cetin, Can Baris & Zaccour, Georges, 2023. "Remanufacturing with innovative features: A strategic analysis," European Journal of Operational Research, Elsevier, vol. 310(2), pages 655-669.
    3. Cheng-Han Wu, 2021. "Production-quality policy for a make-from-stock remanufacturing system," Flexible Services and Manufacturing Journal, Springer, vol. 33(2), pages 425-456, June.
    4. Chowdhury, Sayan & Verma, Nishant K., 2024. "Walking a tightrope: Impact of adopting voluntary right-to-repair policy on firm profit and consumer welfare," International Journal of Production Economics, Elsevier, vol. 272(C).
    5. Zheng, Xiong & Govindan, Kannan & Deng, Qianzhou & Feng, Lipan, 2019. "Effects of design for the environment on firms’ production and remanufacturing strategies," International Journal of Production Economics, Elsevier, vol. 213(C), pages 217-228.
    6. Han, Xiaohua & Yang, Qianxia & Shang, Jennifer & Pu, Xujin, 2017. "Optimal strategies for trade-old-for-remanufactured programs: Receptivity, durability, and subsidy," International Journal of Production Economics, Elsevier, vol. 193(C), pages 602-616.
    7. De, Arijit & Ray, Ankita & Kundu, Tanmoy & Sheu, Jiuh-Biing, 2023. "Is it wise to compete or to collaborate? Remanufacturing business models under collective extended producer responsibility legislation," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 179(C).
    8. Li, Wei & Jin, Mingzhou & Galbreth, Michael R., 2024. "Should original equipment manufacturers authorize third-party remanufacturers?," European Journal of Operational Research, Elsevier, vol. 314(3), pages 1013-1028.
    9. Liu, Zhi & Li, Kevin W. & Li, Bang-Yi & Huang, Jun & Tang, Juan, 2019. "Impact of product-design strategies on the operations of a closed-loop supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 124(C), pages 75-91.
    10. Wu, Cheng-Han, 2015. "Strategic and operational decisions under sales competition and collection competition for end-of-use products in remanufacturing," International Journal of Production Economics, Elsevier, vol. 169(C), pages 11-20.
    11. Zhou, Qin & Meng, Chao & Yuen, Kum Fai, 2020. "The impact of secondary market competition on refurbishing authorization strategies," International Journal of Production Economics, Elsevier, vol. 228(C).
    12. Qixiang Wang & Xiaobo Wang, 2022. "Does Product Eco-design Promote Remanufacturing: Application of a Stylized Game-theoretic Model," Sustainability, MDPI, vol. 15(1), pages 1-20, December.
    13. Xue, Dongmei & Teunter, Ruud H. & Zhu, Stuart X. & Zhou, Weihua, 2021. "Entering the high-end market by collecting and remanufacturing a competitor’s high-end cores," Omega, Elsevier, vol. 99(C).
    14. Zu-Jun Ma & Qin Zhou & Ying Dai & Gao-Feng Guan, 2018. "To License or Not to License Remanufacturing Business?," Sustainability, MDPI, vol. 10(2), pages 1-21, January.
    15. Zhao, Senlin & You, Zhuangzhuang & Zhu, Qinghua, 2021. "Quality choice for product recovery considering a trade-in program and third-party remanufacturing competition," International Journal of Production Economics, Elsevier, vol. 240(C).
    16. Ehsan Shekarian & Simme Douwe Flapper, 2021. "Analyzing the Structure of Closed-Loop Supply Chains: A Game Theory Perspective," Sustainability, MDPI, vol. 13(3), pages 1-32, January.
    17. Gan, Shu San & Pujawan, I. Nyoman & Suparno, & Widodo, Basuki, 2015. "Pricing decision model for new and remanufactured short-life cycle products with time-dependent demand," Operations Research Perspectives, Elsevier, vol. 2(C), pages 1-12.
    18. Yan Zhang & Wen Zhang, 2023. "Optimal pricing and greening decisions in a supply chain when considering market segmentation," Annals of Operations Research, Springer, vol. 324(1), pages 93-130, May.
    19. Xiaohua Han & Ying Shen & Yiwen Bian, 2020. "Optimal recovery strategy of manufacturers: Remanufacturing products or recycling materials?," Annals of Operations Research, Springer, vol. 290(1), pages 463-489, July.
    20. Niu, Baozhuang & Bao, Jinxiao & Cao, Bin, 2022. "Retailer's make-or-buy decision for remanufactured products under in-house yield uncertainty," Omega, Elsevier, vol. 110(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:jomega:v:102:y:2021:i:c:s0305048320307416. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/375/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.