IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v277y2023ics0360544223009702.html
   My bibliography  Save this article

Life cycle assessment of plastic waste and energy recovery

Author

Listed:
  • Vlasopoulos, Antonis
  • Malinauskaite, Jurgita
  • Żabnieńska-Góra, Alina
  • Jouhara, Hussam

Abstract

Plastics are essential in our economy and everyday life. However, plastic pollution is a global concern. To address this issue, the European Strategy for Plastics in a Circular Economy was adopted in January 2018. Attention has been raised to the entire life cycle of products, with legislation stating that plastic used throughout the design phase to manufacturing and packaging phases needs to be recyclable by 2030. This study evaluates selected plastic material categories and technologies carrying out a review of Life Cycle Assessment (LCA) analysis from literature. The literature review was carried out, the indicator units for impact categories among the investigated mid-point methodologies as well as the conversion factors for the metrics harmonization were provided and finally a detailed analysis of the environmental impact of several types of plastics was carried out for two options in the waste hierarchy, which are through disposal by sending waste to landfills and incineration with energy recovery. The disposal, treatment and recycling of 2.2 tonnes of general plastic waste including non-recyclable material delivered to a recycling facility was considered for comparison with these methods. An assessment of the comparative advantages of each practice was conducted. The potential for energy recovery was highlighted.

Suggested Citation

  • Vlasopoulos, Antonis & Malinauskaite, Jurgita & Żabnieńska-Góra, Alina & Jouhara, Hussam, 2023. "Life cycle assessment of plastic waste and energy recovery," Energy, Elsevier, vol. 277(C).
    • Handle: RePEc:eee:energy:v:277:y:2023:i:c:s0360544223009702
    DOI: 10.1016/j.energy.2023.127576
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223009702
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.127576?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wienchol, Paulina & Szlęk, Andrzej & Ditaranto, Mario, 2020. "Waste-to-energy technology integrated with carbon capture – Challenges and opportunities," Energy, Elsevier, vol. 198(C).
    2. Malinauskaite, J. & Jouhara, H. & Czajczyńska, D. & Stanchev, P. & Katsou, E. & Rostkowski, P. & Thorne, R.J. & Colón, J. & Ponsá, S. & Al-Mansour, F. & Anguilano, L. & Krzyżyńska, R. & López, I.C. & , 2017. "Municipal solid waste management and waste-to-energy in the context of a circular economy and energy recycling in Europe," Energy, Elsevier, vol. 141(C), pages 2013-2044.
    3. Panda, Achyut K. & Singh, R.K. & Mishra, D.K., 2010. "Thermolysis of waste plastics to liquid fuel: A suitable method for plastic waste management and manufacture of value added products--A world prospective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 233-248, January.
    4. Olabi, A.G. & Abdelkareem, Mohammad Ali, 2022. "Renewable energy and climate change," Renewable and Sustainable Energy Reviews, Elsevier, vol. 158(C).
    5. Jouhara, Hussam & Nieto, Nerea & Egilegor, Bakartxo & Zuazua, Josu & González, Eva & Yebra, Ignacio & Igesias, Alfredo & Delpech, Bertrand & Almahmoud, Sulaiman & Brough, Daniel & Malinauskaite, Jurgi, 2023. "Waste heat recovery solution based on a heat pipe heat exchanger for the aluminium die casting industry," Energy, Elsevier, vol. 266(C).
    6. Luo, Chao & Ju, Yanbing & Santibanez Gonzalez, Ernesto D.R. & Dong, Peiwu & Wang, Aihua, 2020. "The waste-to-energy incineration plant site selection based on hesitant fuzzy linguistic Best-Worst method ANP and double parameters TOPSIS approach: A case study in China," Energy, Elsevier, vol. 211(C).
    7. Kijo-Kleczkowska, Agnieszka & Szumera, Magdalena & Gnatowski, Adam & Sadkowski, Dominik, 2022. "Comparative thermal analysis of coal fuels, biomass, fly ash and polyamide," Energy, Elsevier, vol. 258(C).
    8. Mayanti, Bening & Helo, Petri, 2022. "Closed-loop supply chain potential of agricultural plastic waste: Economic and environmental assessment of bale wrap waste recycling in Finland," International Journal of Production Economics, Elsevier, vol. 244(C).
    9. Manfredi, Simone & Tonini, Davide & Christensen, Thomas H., 2011. "Environmental assessment of different management options for individual waste fractions by means of life-cycle assessment modelling," Resources, Conservation & Recycling, Elsevier, vol. 55(11), pages 995-1004.
    10. Chen, Heng & Li, Jiarui & Li, Tongyu & Xu, Gang & Jin, Xi & Wang, Min & Liu, Tong, 2022. "Performance assessment of a novel medical-waste-to-energy design based on plasma gasification and integrated with a municipal solid waste incineration plant," Energy, Elsevier, vol. 245(C).
    11. Bujak, Janusz Wojciech, 2015. "Thermal utilization (treatment) of plastic waste," Energy, Elsevier, vol. 90(P2), pages 1468-1477.
    12. Ismail, Mohamed M. & Dincer, Ibrahim, 2023. "A new renewable energy based integrated gasification system for hydrogen production from plastic wastes," Energy, Elsevier, vol. 270(C).
    13. Malinauskaite, J. & Jouhara, H., 2019. "The trilemma of waste-to-energy: A multi-purpose solution," Energy Policy, Elsevier, vol. 129(C), pages 636-645.
    14. Wang, Dan & Tang, Yu-Ting & He, Jun & Yang, Fei & Robinson, Darren, 2021. "Generalized models to predict the lower heating value (LHV) of municipal solid waste (MSW)," Energy, Elsevier, vol. 216(C).
    15. Marisa D. M. Vieira & Thomas C. Ponsioen & Mark J. Goedkoop & Mark A. J. Huijbregts, 2017. "Surplus Ore Potential as a Scarcity Indicator for Resource Extraction," Journal of Industrial Ecology, Yale University, vol. 21(2), pages 381-390, April.
    16. Wang, Shuang & Rodriguez Alejandro, David Aaron & Kim, Hana & Kim, Jae-Young & Lee, Yu-Ri & Nabgan, Walid & Hwang, Byung Wook & Lee, Doyeon & Nam, Hyungseok & Ryu, Ho-Jung, 2022. "Experimental investigation of plastic waste pyrolysis fuel and diesel blends combustion and its flue gas emission analysis in a 5 kW heater," Energy, Elsevier, vol. 247(C).
    17. J. Hidalgo-Crespo & C.M. Moreira & F.X. Jervis & M. Soto & J.L. Amaya & L. Banguera, 2022. "Circular economy of expanded polystyrene container production: Environmental benefits of household waste recycling considering renewable energies," Post-Print hal-04105772, HAL.
    18. Xing, Zhou & Ping, Zhou & Xiqiang, Zhao & Zhanlong, Song & Wenlong, Wang & Jing, Sun & Yanpeng, Mao, 2021. "Applicability of municipal solid waste incineration (MSWI) system integrated with pre-drying or torrefaction for flue gas waste heat recovery," Energy, Elsevier, vol. 224(C).
    19. Kossińska, Nina & Krzyżyńska, Renata & Ghazal, Heba & Jouhara, Hussam, 2023. "Hydrothermal carbonisation of sewage sludge and resulting biofuels as a sustainable energy source," Energy, Elsevier, vol. 275(C).
    20. Fox, James A. & Stacey, Neil T., 2019. "Process targeting: An energy based comparison of waste plastic processing technologies," Energy, Elsevier, vol. 170(C), pages 273-283.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Caferra, Rocco & D'Adamo, Idiano & Morone, Piergiuseppe, 2023. "Wasting energy or energizing waste? The public acceptance of waste-to-energy technology," Energy, Elsevier, vol. 263(PE).
    2. Wójtowicz-Wróbel, Agnieszka & Kania, Olga & Kocewiak, Katarzyna & Wójtowicz, Ryszard & Dzierwa, Piotr & Trojan, Marcin, 2023. "Thermal-flow calculations for a thermal waste treatment plant and CFD modelling of the spread of gases in the context of urban structures," Energy, Elsevier, vol. 263(PD).
    3. Ukrit Suksanguan & Somsak Siwadamrongpong & Thanapong Champahom & Sajjakaj Jomnonkwao & Tassana Boonyoo & Vatanavongs Ratanavaraha, 2022. "Structural Equation Model of Factors Influencing the Selection of Industrial Waste Disposal Service in Cement Kilns," Sustainability, MDPI, vol. 14(7), pages 1-19, March.
    4. Kar, Sumi & Basu, Kajla & Sarkar, Biswajit, 2023. "Advertisement policy for dual-channel within emissions-controlled flexible production system," Journal of Retailing and Consumer Services, Elsevier, vol. 71(C).
    5. Zhai, Jihua & Burke, Ian T. & Stewart, Douglas I., 2021. "Beneficial management of biomass combustion ashes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 151(C).
    6. Nketiah, Emmanuel & Song, Huaming & Cai, Xiang & Adjei, Mavis & Adu-Gyamfi, Gibbson & Obuobi, Bright, 2022. "Citizens’ intention to invest in municipal solid waste to energy projects in Ghana: The impact of direct and indirect effects," Energy, Elsevier, vol. 254(PC).
    7. Luigi Fortuna & Arturo Buscarino, 2022. "Sustainable Energy Systems," Energies, MDPI, vol. 15(23), pages 1-7, December.
    8. Corina Pelau & Alexandra Catalina Chinie, 2018. "Econometric Model for Measuring the Impact of the Education Level of the Population on the Recycling Rate in a Circular Economy," The AMFITEATRU ECONOMIC journal, Academy of Economic Studies - Bucharest, Romania, vol. 20(48), pages 340-340.
    9. Di Foggia, Giacomo & Beccarello, Massimo, 2021. "Drivers of municipal solid waste management cost based on cost models inherent to sorted and unsorted waste," SocArXiv s6q3m, Center for Open Science.
    10. Zhao, Shuchun & Guo, Junheng & Dang, Xiuhu & Ai, Bingyan & Zhang, Minqing & Li, Wei & Zhang, Jinli, 2022. "Energy consumption, flow characteristics and energy-efficient design of cup-shape blade stirred tank reactors: Computational fluid dynamics and artificial neural network investigation," Energy, Elsevier, vol. 240(C).
    11. Di Foggia, Giacomo & Beccarello, Massimo, 2021. "Designing waste management systems to meet circular economy goals: The Italian case," MPRA Paper 105959, University Library of Munich, Germany.
    12. Mahsa Dehghan Manshadi & Milad Mousavi & M. Soltani & Amir Mosavi & Levente Kovacs, 2022. "Deep Learning for Modeling an Offshore Hybrid Wind–Wave Energy System," Energies, MDPI, vol. 15(24), pages 1-16, December.
    13. Kumarasamy Palanimuthu & Ganesh Mayilsamy & Ameerkhan Abdul Basheer & Seong-Ryong Lee & Dongran Song & Young Hoon Joo, 2022. "A Review of Recent Aerodynamic Power Extraction Challenges in Coordinated Pitch, Yaw, and Torque Control of Large-Scale Wind Turbine Systems," Energies, MDPI, vol. 15(21), pages 1-27, November.
    14. Halkos, George & Managi, Shunsuke, 2023. "New developments in the disciplines of environmental and resource economics," Economic Analysis and Policy, Elsevier, vol. 77(C), pages 513-522.
    15. Konrad Siegfried & Susann Günther & Sara Mengato & Fabian Riedel & Daniela Thrän, 2023. "Boosting Biowaste Valorisation—Do We Need an Accelerated Regional Implementation of the European Law for End-of-Waste?," Sustainability, MDPI, vol. 15(17), pages 1-13, September.
    16. Pashchenko, Dmitry, 2023. "Hydrogen-rich gas as a fuel for the gas turbines: A pathway to lower CO2 emission," Renewable and Sustainable Energy Reviews, Elsevier, vol. 173(C).
    17. Kamal, Md. Mustafa & Saini, R.P., 2023. "Performance investigations of hybrid hydrokinetic turbine rotor with different system and operating parameters," Energy, Elsevier, vol. 267(C).
    18. Valdas Rudelis & Tadas Dambrauskas & Agne Grineviciene & Kestutis Baltakys, 2019. "The Prospective Approach for the Reduction of Fluoride Ions Mobility in Industrial Waste by Creating Products of Commercial Value," Sustainability, MDPI, vol. 11(3), pages 1-18, January.
    19. A. G. Olabi & Khaled Obaideen & Mohammad Ali Abdelkareem & Maryam Nooman AlMallahi & Nabila Shehata & Abdul Hai Alami & Ayman Mdallal & Asma Ali Murah Hassan & Enas Taha Sayed, 2023. "Wind Energy Contribution to the Sustainable Development Goals: Case Study on London Array," Sustainability, MDPI, vol. 15(5), pages 1-22, March.
    20. Emmanuel D. Adamides & Konstantinos Georgousoglou & Yannis Mouzakitis, 2023. "Designing a Flexible and Adaptive Municipal Waste Management Organisation Using the Viable System Model," Sustainability, MDPI, vol. 15(18), pages 1-24, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:277:y:2023:i:c:s0360544223009702. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.