IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v288y2021ics0306261921001069.html
   My bibliography  Save this article

Exploring the role of forest biomass in abating fossil CO2 emissions in the iron and steel industry – The case of Sweden

Author

Listed:
  • Nwachukwu, Chinedu Maureen
  • Wang, Chuan
  • Wetterlund, Elisabeth

Abstract

This paper considers the utilisation of forest biomass in iron and steel making by putting focus on the supply of available raw biomass assortment, biomass conversion technologies, and distribution of biomass-based products towards reduced fossil CO2 emissions in the iron and steel industry. Biomass-based products are produced by converting biomass assortments from forestry operations and forest industries via slow pyrolysis and gasification technologies. Using a spatially explicit cost optimisation model, biomass supply is optimised to suit the corresponding demand for energy and material substitution, and the extent to which biomass can be a tool in CO2 abatement is explored. The study findings show that maximum use of biomass-based products result in a 43% reduction in CO2 emissions across the existing steel producing technologies. Results also show that increasing the rate of biomass utilisation via substitution targets is more effective than the use of a carbon pricing policy, since the maximum CO2 reduction is unmet even with very high CO2 prices. In the scenario analysis, it is found that low fossil fuel prices constitute a barrier to adopting biomass as an alternative to fossil energy use. Compared to the business-as-usual case, a maximum of 27% increase in energy-related costs was calculated for the industry.

Suggested Citation

  • Nwachukwu, Chinedu Maureen & Wang, Chuan & Wetterlund, Elisabeth, 2021. "Exploring the role of forest biomass in abating fossil CO2 emissions in the iron and steel industry – The case of Sweden," Applied Energy, Elsevier, vol. 288(C).
    • Handle: RePEc:eee:appene:v:288:y:2021:i:c:s0306261921001069
    DOI: 10.1016/j.apenergy.2021.116558
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261921001069
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2021.116558?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Suopajärvi, Hannu & Umeki, Kentaro & Mousa, Elsayed & Hedayati, Ali & Romar, Henrik & Kemppainen, Antti & Wang, Chuan & Phounglamcheik, Aekjuthon & Tuomikoski, Sari & Norberg, Nicklas & Andefors, Alf , 2018. "Use of biomass in integrated steelmaking – Status quo, future needs and comparison to other low-CO2 steel production technologies," Applied Energy, Elsevier, vol. 213(C), pages 384-407.
    2. Johansson, Maria T., 2013. "Bio-synthetic natural gas as fuel in steel industry reheating furnaces – A case study of economic performance and effects on global CO2 emissions," Energy, Elsevier, vol. 57(C), pages 699-708.
    3. Mousa, Elsayed & Wang, Chuan & Riesbeck, Johan & Larsson, Mikael, 2016. "Biomass applications in iron and steel industry: An overview of challenges and opportunities," Renewable and Sustainable Energy Reviews, Elsevier, vol. 65(C), pages 1247-1266.
    4. Rootzén, Johan & Johnsson, Filip, 2016. "Paying the full price of steel – Perspectives on the cost of reducing carbon dioxide emissions from the steel industry," Energy Policy, Elsevier, vol. 98(C), pages 459-469.
    5. Hannu Suopajärvi & Timo Fabritius, 2013. "Towards More Sustainable Ironmaking—An Analysis of Energy Wood Availability in Finland and the Economics of Charcoal Production," Sustainability, MDPI, vol. 5(3), pages 1-20, March.
    6. de Jong, Sierk & Hoefnagels, Ric & Wetterlund, Elisabeth & Pettersson, Karin & Faaij, André & Junginger, Martin, 2017. "Cost optimization of biofuel production – The impact of scale, integration, transport and supply chain configurations," Applied Energy, Elsevier, vol. 195(C), pages 1055-1070.
    7. Ahlström, Johan M. & Pettersson, Karin & Wetterlund, Elisabeth & Harvey, Simon, 2017. "Value chains for integrated production of liquefied bio-SNG at sawmill sites – Techno-economic and carbon footprint evaluation," Applied Energy, Elsevier, vol. 206(C), pages 1590-1608.
    8. Carvalho, Mariana M.O. & Cardoso, Marcelo & Vakkilainen, Esa K., 2015. "Biomass gasification for natural gas substitution in iron ore pelletizing plants," Renewable Energy, Elsevier, vol. 81(C), pages 566-577.
    9. Nwachukwu, Chinedu M. & Toffolo, Andrea & Wetterlund, Elisabeth, 2020. "Biomass-based gas use in Swedish iron and steel industry – Supply chain and process integration considerations," Renewable Energy, Elsevier, vol. 146(C), pages 2797-2811.
    10. Gunarathne, Duleeka Sandamali & Mellin, Pelle & Yang, Weihong & Pettersson, Magnus & Ljunggren, Rolf, 2016. "Performance of an effectively integrated biomass multi-stage gasification system and a steel industry heat treatment furnace," Applied Energy, Elsevier, vol. 170(C), pages 353-361.
    11. Wei, Rufei & Zhang, Lingling & Cang, Daqiang & Li, Jiaxin & Li, Xianwei & Xu, Chunbao Charles, 2017. "Current status and potential of biomass utilization in ferrous metallurgical industry," Renewable and Sustainable Energy Reviews, Elsevier, vol. 68(P1), pages 511-524.
    12. Quader, M. Abdul & Ahmed, Shamsuddin & Ghazilla, Raja Ariffin Raja & Ahmed, Shameem & Dahari, Mahidzal, 2015. "A comprehensive review on energy efficient CO2 breakthrough technologies for sustainable green iron and steel manufacturing," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 594-614.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sergio García García & Vicente Rodríguez Montequín & Marina Díaz Piloñeta & Susana Torno Lougedo, 2021. "Multi-Objective Optimization of Steel Off-Gas in Cogeneration Using the ε-Constraint Method: A Combined Coke Oven and Converter Gas Case Study," Energies, MDPI, vol. 14(10), pages 1-21, May.
    2. Marcin Sajdak & Roksana Muzyka & Grzegorz Gałko & Ewelina Ksepko & Monika Zajemska & Szymon Sobek & Dariusz Tercki, 2022. "Actual Trends in the Usability of Biochar as a High-Value Product of Biomass Obtained through Pyrolysis," Energies, MDPI, vol. 16(1), pages 1-30, December.
    3. Nwachukwu, Chinedu Maureen & Olofsson, Elias & Lundmark, Robert & Wetterlund, Elisabeth, 2022. "Evaluating fuel switching options in the Swedish iron and steel industry under increased competition for forest biomass," Applied Energy, Elsevier, vol. 324(C).
    4. Zhang, Lianjie & Tan, Yongdong & Cai, Dongqiang & Sun, Jifu & Zhang, Yue & Li, Longzhi & Zhang, Qiang & Zou, Guifu & Song, Zhanlong & Bai, Yonghui, 2022. "Enhanced pyrolysis of woody biomass under interaction of microwave and needle-shape metal and its production properties," Energy, Elsevier, vol. 249(C).
    5. Li, Feng & Chu, Mansheng & Tang, Jue & Liu, Zhenggen & Guo, Jun & Yan, Ruijun & Liu, Peijun, 2022. "Thermodynamic performance analysis and environmental impact assessment of an integrated system for hydrogen generation and steelmaking," Energy, Elsevier, vol. 241(C).
    6. de Raad, Brendon & van Lieshout, Marit & Stougie, Lydia & Ramirez, Andrea, 2023. "Exploring impacts of deployment sequences of industrial mitigation measures on their combined CO2 reduction potential," Energy, Elsevier, vol. 262(PB).
    7. Chen, Demin & Li, Jiaqi & Wang, Zhao & Lu, Biao & Chen, Guang, 2022. "Hierarchical model to find the path reducing CO2 emissions of integrated iron and steel production," Energy, Elsevier, vol. 258(C).
    8. Mohd Idris, Muhammad Nurariffudin & Hashim, Haslenda & Leduc, Sylvain & Yowargana, Ping & Kraxner, Florian & Woon, Kok Sin, 2021. "Deploying bioenergy for decarbonizing Malaysian energy sectors and alleviating renewable energy poverty," Energy, Elsevier, vol. 232(C).
    9. Salvatore Digiesi & Giovanni Mummolo & Micaela Vitti, 2022. "Minimum Emissions Configuration of a Green Energy–Steel System: An Analytical Model," Energies, MDPI, vol. 15(9), pages 1-21, May.
    10. Yuchiao Lu & Hanmin Yang & Andrey V. Karasev & Chuan Wang & Pär G. Jönsson, 2022. "Applications of Hydrochar and Charcoal in the Iron and Steelmaking Industry—Part 1: Characterization of Carbonaceous Materials," Sustainability, MDPI, vol. 14(15), pages 1-27, August.
    11. Donghe Li & Huigang Mu & Yelin Gao & Min Lu & Chunlu Liu, 2022. "A GIS-Based Analysis of the Carbon-Oxygen Balance of Urban Forests in the Southern Mountainous Area of Jinan, China," Sustainability, MDPI, vol. 14(23), pages 1-11, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Nwachukwu, Chinedu M. & Toffolo, Andrea & Wetterlund, Elisabeth, 2020. "Biomass-based gas use in Swedish iron and steel industry – Supply chain and process integration considerations," Renewable Energy, Elsevier, vol. 146(C), pages 2797-2811.
    2. Nwachukwu, Chinedu Maureen & Olofsson, Elias & Lundmark, Robert & Wetterlund, Elisabeth, 2022. "Evaluating fuel switching options in the Swedish iron and steel industry under increased competition for forest biomass," Applied Energy, Elsevier, vol. 324(C).
    3. Chen, Qianqian & Gu, Yu & Tang, Zhiyong & Wei, Wei & Sun, Yuhan, 2018. "Assessment of low-carbon iron and steel production with CO2 recycling and utilization technologies: A case study in China," Applied Energy, Elsevier, vol. 220(C), pages 192-207.
    4. Jha, Gaurav & Soren, S., 2017. "Study on applicability of biomass in iron ore sintering process," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 399-407.
    5. Ida Karlsson & Johan Rootzén & Alla Toktarova & Mikael Odenberger & Filip Johnsson & Lisa Göransson, 2020. "Roadmap for Decarbonization of the Building and Construction Industry—A Supply Chain Analysis Including Primary Production of Steel and Cement," Energies, MDPI, vol. 13(16), pages 1-40, August.
    6. Suopajärvi, Hannu & Umeki, Kentaro & Mousa, Elsayed & Hedayati, Ali & Romar, Henrik & Kemppainen, Antti & Wang, Chuan & Phounglamcheik, Aekjuthon & Tuomikoski, Sari & Norberg, Nicklas & Andefors, Alf , 2018. "Use of biomass in integrated steelmaking – Status quo, future needs and comparison to other low-CO2 steel production technologies," Applied Energy, Elsevier, vol. 213(C), pages 384-407.
    7. Toloue Farrokh, Najibeh & Suopajärvi, Hannu & Mattila, Olli & Umeki, Kentaro & Phounglamcheik, Aekjuthon & Romar, Henrik & Sulasalmi, Petri & Fabritius, Timo, 2018. "Slow pyrolysis of by-product lignin from wood-based ethanol production– A detailed analysis of the produced chars," Energy, Elsevier, vol. 164(C), pages 112-123.
    8. Cheng, Zhilong & Tan, Zhoutuo & Guo, Zhigang & Yang, Jian & Wang, Qiuwang, 2020. "Recent progress in sustainable and energy-efficient technologies for sinter production in the iron and steel industry," Renewable and Sustainable Energy Reviews, Elsevier, vol. 131(C).
    9. Walmsley, Timothy Gordon & Philipp, Matthias & Picón-Núñez, Martín & Meschede, Henning & Taylor, Matthew Thomas & Schlosser, Florian & Atkins, Martin John, 2023. "Hybrid renewable energy utility systems for industrial sites: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    10. Zheng, Kaiyue & Han, Hengda & Hu, Song & Ren, Qiangqiang & Su, Sheng & Wang, Yi & Jiang, Long & Xu, Jun & Li, Hanjian & Tong, Yuxing & Xiang, Jun, 2023. "Upgrading biomass waste to bio-coking coal by pressurized torrefaction: Synergistic effect between corncob and lignin," Energy, Elsevier, vol. 267(C).
    11. Zola, Fernanda Cavicchioli & Colmenero, João Carlos & Aragão, Franciely Velozo & Rodrigues, Thaisa & Junior, Aldo Braghini, 2020. "Multicriterial model for selecting a charcoal kiln," Energy, Elsevier, vol. 190(C).
    12. Gunarathne, Duleeka Sandamali & Mellin, Pelle & Yang, Weihong & Pettersson, Magnus & Ljunggren, Rolf, 2016. "Performance of an effectively integrated biomass multi-stage gasification system and a steel industry heat treatment furnace," Applied Energy, Elsevier, vol. 170(C), pages 353-361.
    13. Skoczkowski, Tadeusz & Verdolini, Elena & Bielecki, Sławomir & Kochański, Max & Korczak, Katarzyna & Węglarz, Arkadiusz, 2020. "Technology innovation system analysis of decarbonisation options in the EU steel industry," Energy, Elsevier, vol. 212(C).
    14. Giuntini, Lorenzo & Lamioni, Rachele & Linari, Luca & Saccomano, Pietro & Mainardi, Davide & Tognotti, Leonardo & Galletti, Chiara, 2022. "Decarbonization of a tissue paper plant: Advanced numerical simulations to assess the replacement of fossil fuels with a biomass-derived syngas," Renewable Energy, Elsevier, vol. 198(C), pages 884-893.
    15. Uribe-Soto, Wilmar & Portha, Jean-François & Commenge, Jean-Marc & Falk, Laurent, 2017. "A review of thermochemical processes and technologies to use steelworks off-gases," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 809-823.
    16. Suopajärvi, Hannu & Pongrácz, Eva & Fabritius, Timo, 2014. "Bioreducer use in Finnish blast furnace ironmaking – Analysis of CO2 emission reduction potential and mitigation cost," Applied Energy, Elsevier, vol. 124(C), pages 82-93.
    17. Wang, Chunyan & Wang, Ranran & Hertwich, Edgar & Liu, Yi, 2017. "A technology-based analysis of the water-energy-emission nexus of China’s steel industry," Resources, Conservation & Recycling, Elsevier, vol. 124(C), pages 116-128.
    18. Ubando, Aristotle T. & Chen, Wei-Hsin & Ong, Hwai Chyuan, 2019. "Iron oxide reduction by graphite and torrefied biomass analyzed by TG-FTIR for mitigating CO2 emissions," Energy, Elsevier, vol. 180(C), pages 968-977.
    19. Bożena Gajdzik & Włodzimierz Sroka & Jolita Vveinhardt, 2021. "Energy Intensity of Steel Manufactured Utilising EAF Technology as a Function of Investments Made: The Case of the Steel Industry in Poland," Energies, MDPI, vol. 14(16), pages 1-17, August.
    20. Yuan, Peng & Shen, Boxiong & Duan, Dongping & Adwek, George & Mei, Xue & Lu, Fengju, 2017. "Study on the formation of direct reduced iron by using biomass as reductants of carbon containing pellets in RHF process," Energy, Elsevier, vol. 141(C), pages 472-482.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:288:y:2021:i:c:s0306261921001069. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.