IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v104y2013icp869-879.html

IGCC–EPI: Decentralized concept of a highly load-flexible IGCC power plant for excess power integration

Author

Listed:
  • Buttler, Alexander
  • Kunze, Christian
  • Spliethoff, Hartmut

Abstract

The growing share of renewable energy generation eventually could lead to increased fluctuations in power supply and to negative residual loads. Therefore flexible power plants as well as significant long-term energy storage capacity are required. In this paper, an Integrated Gasification Combined Cycle (IGCC) power plant is combined with an electrolysis plant and substitute natural gas (SNG) synthesis. In this way a highly load-flexible IGCC plant is developed for excess power integration (EPI) from renewable energy sources or inflexible conventional power plants. The proposed IGCC–EPI concept is modeled in Aspen Plus. The decentralized power plant has a capacity of 125MWth and runs on hard coal. An extensive parameter study has demonstrated the superior operation range from +67MW to −253MW of net power output/input. Synergies between the IGCC–EPI power plant, the methanation process and the electrolysis indicate a maximum overall efficiency of 40.1% from coal and excess energy to SNG and back to electricity.

Suggested Citation

  • Buttler, Alexander & Kunze, Christian & Spliethoff, Hartmut, 2013. "IGCC–EPI: Decentralized concept of a highly load-flexible IGCC power plant for excess power integration," Applied Energy, Elsevier, vol. 104(C), pages 869-879.
    • Handle: RePEc:eee:appene:v:104:y:2013:i:c:p:869-879
    DOI: 10.1016/j.apenergy.2012.11.066
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261912008719
    Download Restriction: Full text may be restricted for ScienceDirect subscribers
    File URL: https://libkey.io/10.1016/j.apenergy.2012.11.066?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Gassner, M. & Maréchal, F., 2008. "Thermo-economic optimisation of the integration of electrolysis in synthetic natural gas production from wood," Energy, Elsevier, vol. 33(2), pages 189-198.
    2. Clausen, Lasse R. & Houbak, Niels & Elmegaard, Brian, 2010. "Technoeconomic analysis of a methanol plant based on gasification of biomass and electrolysis of water," Energy, Elsevier, vol. 35(5), pages 2338-2347.
    3. Meerman, J.C. & Ramírez, A. & Turkenburg, W.C. & Faaij, A.P.C., 2011. "Performance of simulated flexible integrated gasification polygeneration facilities. Part A: A technical-energetic assessment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(6), pages 2563-2587, August.
    4. Kim, T.S., 2004. "Comparative analysis on the part load performance of combined cycle plants considering design performance and power control strategy," Energy, Elsevier, vol. 29(1), pages 71-85.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wolfersdorf, Christian & Boblenz, Kristin & Pardemann, Robert & Meyer, Bernd, 2015. "Syngas-based annex concepts for chemical energy storage and improving flexibility of pulverized coal combustion power plants," Applied Energy, Elsevier, vol. 156(C), pages 618-627.
    2. Timo Blumberg & Max Sorgenfrei & George Tsatsaronis, 2015. "Design and Assessment of an IGCC Concept with CO 2 Capture for the Co-Generation of Electricity and Substitute Natural Gas," Sustainability, MDPI, vol. 7(12), pages 1-13, December.
    3. Zhang, Quancong & Guo, Xiaoxue & Yao, Xu & Cao, Zhikai & Sha, Yong & Chen, Binghui & Zhou, Hua, 2020. "Modeling, simulation, and systematic analysis of high-temperature adiabatic fixed-bed process of CO methanation with novel catalysts," Applied Energy, Elsevier, vol. 279(C).
    4. Chaudhary Awais Salman & Ch Bilal Omer, 2020. "Process Modelling and Simulation of Waste Gasification-Based Flexible Polygeneration Facilities for Power, Heat and Biofuels Production," Energies, MDPI, vol. 13(16), pages 1-22, August.
    5. Thallam Thattai, A. & Oldenbroek, V. & Schoenmakers, L. & Woudstra, T. & Aravind, P.V., 2016. "Experimental model validation and thermodynamic assessment on high percentage (up to 70%) biomass co-gasification at the 253MWe integrated gasification combined cycle power plant in Buggenum, The Netherlands," Applied Energy, Elsevier, vol. 168(C), pages 381-393.
    6. Forman, Clemens & Gootz, Matthias & Wolfersdorf, Christian & Meyer, Bernd, 2017. "Coupling power generation with syngas-based chemical synthesis," Applied Energy, Elsevier, vol. 198(C), pages 180-191.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wolfersdorf, Christian & Boblenz, Kristin & Pardemann, Robert & Meyer, Bernd, 2015. "Syngas-based annex concepts for chemical energy storage and improving flexibility of pulverized coal combustion power plants," Applied Energy, Elsevier, vol. 156(C), pages 618-627.
    2. Clausen, Lasse R., 2017. "Energy efficient thermochemical conversion of very wet biomass to biofuels by integration of steam drying, steam electrolysis and gasification," Energy, Elsevier, vol. 125(C), pages 327-336.
    3. Forman, Clemens & Gootz, Matthias & Wolfersdorf, Christian & Meyer, Bernd, 2017. "Coupling power generation with syngas-based chemical synthesis," Applied Energy, Elsevier, vol. 198(C), pages 180-191.
    4. Brouwer, Anne Sjoerd & van den Broek, Machteld & Seebregts, Ad & Faaij, André, 2015. "Operational flexibility and economics of power plants in future low-carbon power systems," Applied Energy, Elsevier, vol. 156(C), pages 107-128.
    5. Clausen, Lasse R., 2015. "Maximizing biofuel production in a thermochemical biorefinery by adding electrolytic hydrogen and by integrating torrefaction with entrained flow gasification," Energy, Elsevier, vol. 85(C), pages 94-104.
    6. Gassner, Martin & Maréchal, François, 2009. "Thermodynamic comparison of the FICFB and Viking gasification concepts," Energy, Elsevier, vol. 34(10), pages 1744-1753.
    7. Zhen, Xudong & Wang, Yang, 2013. "Study of ignition in a high compression ratio SI (spark ignition) methanol engine using LES (large eddy simulation) with detailed chemical kinetics," Energy, Elsevier, vol. 59(C), pages 549-558.
    8. Detchusananard, Thanaphorn & Wiranarongkorn, Kunlanan & Im-orb, Karittha, 2025. "Assessment of bio-methanol and electricity co-production via the integration of biomass-to-methanol process, solid oxide electrolyzer, and power generator," Energy, Elsevier, vol. 336(C).
    9. Zhang, Hanfei & Wang, Ligang & Pérez-Fortes, Mar & Van herle, Jan & Maréchal, François & Desideri, Umberto, 2020. "Techno-economic optimization of biomass-to-methanol with solid-oxide electrolyzer," Applied Energy, Elsevier, vol. 258(C).
    10. Manju Dhakad Tanwar & Felipe Andrade Torres & Ali Mubarak Alqahtani & Pankaj Kumar Tanwar & Yashas Bhand & Omid Doustdar, 2023. "Promising Bioalcohols for Low-Emission Vehicles," Energies, MDPI, vol. 16(2), pages 1-22, January.
    11. Barelli, Linda & Ottaviano, Andrea, 2015. "Supercharged gas turbine combined cycle: An improvement in plant flexibility and efficiency," Energy, Elsevier, vol. 81(C), pages 615-626.
    12. Adnan, Muflih A. & Hossain, Mohammad M. & Kibria, Md Golam, 2020. "Biomass upgrading to high-value chemicals via gasification and electrolysis: A thermodynamic analysis," Renewable Energy, Elsevier, vol. 162(C), pages 1367-1379.
    13. Kotowicz, Janusz & Bartela, Łukasz & Węcel, Daniel & Dubiel, Klaudia, 2017. "Hydrogen generator characteristics for storage of renewably-generated energy," Energy, Elsevier, vol. 118(C), pages 156-171.
    14. Wang, Guoqiang & Wang, Feng & Li, Longjian & Zhang, Guofu, 2013. "Experiment of catalyst activity distribution effect on methanol steam reforming performance in the packed bed plate-type reactor," Energy, Elsevier, vol. 51(C), pages 267-272.
    15. Jana, Kuntal & De, Sudipta, 2015. "Polygeneration using agricultural waste: Thermodynamic and economic feasibility study," Renewable Energy, Elsevier, vol. 74(C), pages 648-660.
    16. Olateju, Babatunde & Kumar, Amit, 2011. "Hydrogen production from wind energy in Western Canada for upgrading bitumen from oil sands," Energy, Elsevier, vol. 36(11), pages 6326-6339.
    17. Lin, Xiaolong & Meng, Xianchen & Song, Huchao & Liu, Yinhe, 2024. "Efficiency improvement and flexibility enhancement by molten salt heat storage for integrated gasification chemical-looping combustion combined cycle under partial loads," Energy, Elsevier, vol. 303(C).
    18. Jesse Maddaloni & Andrew Rowe & G. Cornelis van Kooten, 2006. "Network Constrained Wind Integration: An Optimal Cost Approach," Working Papers 2006-05, University of Victoria, Department of Economics, Resource Economics and Policy Analysis Research Group.
    19. Park, Young Kwang & Kwon, Yong Hyeon & Kang, Do Won & Kim, Tong Seop, 2026. "A new control strategy for compensating degraded performance in gas turbine combined cycles," Energy, Elsevier, vol. 342(C).
    20. Thallam Thattai, A. & Oldenbroek, V. & Schoenmakers, L. & Woudstra, T. & Aravind, P.V., 2016. "Experimental model validation and thermodynamic assessment on high percentage (up to 70%) biomass co-gasification at the 253MWe integrated gasification combined cycle power plant in Buggenum, The Netherlands," Applied Energy, Elsevier, vol. 168(C), pages 381-393.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:104:y:2013:i:c:p:869-879. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.