Printed from https://ideas.repec.org/b/spr/sprbok/978-3-540-75999-7.html
Computational Mechanics
Author
Abstract
No abstract is available for this item.
Individual chapters are listed in the "Chapters" tab
Suggested Citation
DOI: 10.1007/978-3-540-75999-7
Download full text from publisher
To our knowledge, this item is not available for download. To find whether it is available, there are three options:1. Check below whether another version of this item is available online.
2. Check on the provider's web page whether it is in fact available.
3. Perform a for a similarly titled item that would be available.
Book Chapters
The following chapters of this book are listed in IDEAS- Franck J. Vernerey & Wing Kam Liu & Elisa Budyn & Ji Hoon Kim & Albert To, 2007. "Multiresolution Mechanics for Nano/Micro-Structured Materials," Springer Books, in: Computational Mechanics, pages 1-9, Springer.
- Y. B. Yang, 2007. "Rigid Element Concept for Geometric Nonlinear Analysis of Structures Involving Postbuckling Response," Springer Books, in: Computational Mechanics, pages 10-21, Springer.
- Yao Zheng & Jianjun Chen, 2007. "Unstructured Mesh Generation and Its Parallelization," Springer Books, in: Computational Mechanics, pages 22-35, Springer.
- H. W. Zhang & K. P. Wang & Z. Zhang, 2007. "Material Point Method for Numerical Simulation of Failure Phenomena in Multiphase Porous Media," Springer Books, in: Computational Mechanics, pages 36-47, Springer.
- A. Y. T. Leung & Xiang Guo, 2007. "The Atomic-Scale Finite Element Method for Post-Buckling of Carbon Nanotubes," Springer Books, in: Computational Mechanics, pages 48-59, Springer.
- Junzhi Cui & X. G. Yu & Fei Han & Yan Yu, 2007. "Statistical Two-Scale Method for Strength Prediction of Composites with Random Distribution and Its Applications," Springer Books, in: Computational Mechanics, pages 60-79, Springer.
- Jingzhe Pan, 2007. "A Variational Principle and Numerical Scheme for Microstructural Evolution of Materials Controlled By Lattice Diffusion," Springer Books, in: Computational Mechanics, pages 80-87, Springer.
- J. W. Ju & K. Yanase, 2007. "Elastoplastic Micromechanical Damage Mechanics for Composites with Progressive Partial Fiber Debonding and Thermal Residual Stress," Springer Books, in: Computational Mechanics, pages 88-92, Springer.
- H. D. Ma & H. L. Pan & Q. Wang, 2007. "Numerical Simulations of Transitional and Turbulent Flows in Plane Mixing Layers," Springer Books, in: Computational Mechanics, pages 93-106, Springer.
- C. J. Wu & L. Wang, 2007. "3D Numerical Simulation of Self-Propelled Swimming of Bionic Fish School," Springer Books, in: Computational Mechanics, pages 107-121, Springer.
- X. K. Li & X. H. Han & Q. L. Duan, 2007. "Modelling of Non-Isothermal Non-Newtonian Viscoelastic Flows," Springer Books, in: Computational Mechanics, pages 122-135, Springer.
- Gen-hua Shi, 2007. "Applications of Discontinuous Deformation Analysis (DDA) to Rock Engineering," Springer Books, in: Computational Mechanics, pages 136-147, Springer.
- G. R. Liu & G. Y. Zhang, 2007. "Upper and Lower Bounds for Numerical Solutions of Elasticity Problems using LC-PIM and FEM," Springer Books, in: Computational Mechanics, pages 148-155, Springer.
- S. Ma & X. Zhang, 2007. "Material Point Method for Impact and Explosion Problems," Springer Books, in: Computational Mechanics, pages 156-166, Springer.
- Jiun-Shyan Chen & Wei Hu, 2007. "Reproducing Kernel Partition of Unity: from Continuum to Quantum," Springer Books, in: Computational Mechanics, pages 167-179, Springer.
- Jianfei Liu & Shuli Sun & Yongqiang Chen, 2007. "SPR — A New Method for Mesh Improvement and Boundary Recovery," Springer Books, in: Computational Mechanics, pages 180-186, Springer.
- Guojun Zheng & Xiangkui Zhang & Yu Wang & Ping Hu & Sibo Hu & Zhikui Lang, 2007. "Fast Inverse CAE Code for Sheet Metal Forming and Its Relative Technique," Springer Books, in: Computational Mechanics, pages 187-193, Springer.
- P. Chen & Q. C. Zhao & W. B. Peng & Y. Q. Chen & M. W. Yuan, 2007. "Advances in Classical Subspace Iteration Method for Eigenvalue Problem," Springer Books, in: Computational Mechanics, pages 194-205, Springer.
- Ch. Zhang & F. García-Sánchez & A. Sáez, 2007. "Time-Domain BEM Analysis of Cracked Piezoelectric Solids under Impact Loading," Springer Books, in: Computational Mechanics, pages 206-218, Springer.
- Alexander H.-D. Cheng, 2007. "Radial Basis Function Collocation Method," Springer Books, in: Computational Mechanics, pages 219-219, Springer.
- S. Fu & S. Y. Huang & Q. G. Meng & C. S. Chen & S. W. Chang & Y. P. Liao & C. W. Huang & C. K. Wang, 2007. "Modelling of Turbulent Flows at LAST, Tsinghua University," Springer Books, in: Computational Mechanics, pages 220-221, Springer.
- Qiang Lu & Nigel Marks & Ted Belytschko, 2007. "Molecular Dynamics Simulations of the Fracture Mechanism of Tetrahedral Amorphous Carbon," Springer Books, in: Computational Mechanics, pages 222-222, Springer.
- Xiujun Fang & Feng Jin & Chuhan Zhang, 2007. "Modeling of Fracture Process under Water Pressure in Crack using XFEM," Springer Books, in: Computational Mechanics, pages 223-223, Springer.
- Yongjie Liu & Xiangguo Zeng & Qingyuan Wang, 2007. "Numerical Study on Multi-Crack Fracture Parameters under Impact Loading Based on the Virtual Crack Closure Technique," Springer Books, in: Computational Mechanics, pages 224-224, Springer.
- Shenghua Yang, 2007. "The Fracture Process Simulation of the Gear Tooth and the Advance of Computational Fracture Mechanics," Springer Books, in: Computational Mechanics, pages 225-225, Springer.
- R. M. Reddy & B. N. Rao, 2007. "On Efficient Evaluation of Derivatives of Fracture Parameters using Fractal Finite Element Method," Springer Books, in: Computational Mechanics, pages 226-226, Springer.
- C. O. Arun & B. N. Rao & M. S. Siva Kumar, 2007. "An Application of Stochastic Meshfree Method in the Field of Fracture Mechanics," Springer Books, in: Computational Mechanics, pages 227-227, Springer.
- S. Q. Tang & W. K. Liu & E. G. Karpov & T. Y. Hou, 2007. "A Relay-Zone Technique for Computing Dynamic Dislocations," Springer Books, in: Computational Mechanics, pages 228-228, Springer.
- Guangyu Shi, 2007. "On the Interface Elements for Delamination Simulation of Laminated Plates Subject to Low-Velocity Impact," Springer Books, in: Computational Mechanics, pages 229-229, Springer.
- J. Xu & A. Askari & O. Weckner, 2007. "A Perspective on Damage and Failure of Composite Structures based on Innovative Analytical and Testing Methods," Springer Books, in: Computational Mechanics, pages 230-230, Springer.
- X. Liu & A. Scarpas, 2007. "Characterizing the Plastic Strain Localization in Cosserat Media," Springer Books, in: Computational Mechanics, pages 231-231, Springer.
- Lijuan Cao & Shouju Li, 2007. "Prediction Fatigue Life of Dumpers with Cumulative Fatigue Damage Approach and Finite Element Model," Springer Books, in: Computational Mechanics, pages 232-232, Springer.
- Y. J. Guan & Y. T. Wei, 2007. "Simulation of Fatigue Process in FRP Laminates with Local Stress Concentration," Springer Books, in: Computational Mechanics, pages 233-233, Springer.
- Y. G. Zheng & H. W. Zhang & Z. Chen, 2007. "Combined Stochastic Diffusion and Mean-Field Model for Grain Growth," Springer Books, in: Computational Mechanics, pages 234-234, Springer.
- H. Chen & F Gibou, 2007. "Numerical Simulation of Dendritic Solidification on Non-Graded Adaptive Cartesian Grids," Springer Books, in: Computational Mechanics, pages 235-235, Springer.
- Zhong Zeng & Yongxiang Zhang & Jingqiu Chen, 2007. "Model for Czochralski Crystal Growth," Springer Books, in: Computational Mechanics, pages 236-236, Springer.
- L. Lai & G. S. Djambazov & C.-H. Lai & K. A. Pericleous, 2007. "Comparison of Higher-Order Numerical Schemes and Several Filtering Methods Applied to Navier-Stokes Equations with Applications to Computational Aeroacoustics (CAA)," Springer Books, in: Computational Mechanics, pages 237-237, Springer.
- Li Zhang & D. B. Tang & Y. Z. Yang, 2007. "Three-Dimensional Coupling Compact Finite Difference Methods for Navier-Stokes Equations," Springer Books, in: Computational Mechanics, pages 238-238, Springer.
- Feifei Wang & Yongtao Wei, 2007. "The Finite Element Simulation of Turbulent Flow with a Dynamic Eddy Viscosity Model," Springer Books, in: Computational Mechanics, pages 239-239, Springer.
- Y. G. Bai & D. K. Sun & J. H. Lin, 2007. "Large Eddy Simulation of Vortex Shedding due to Forced Vibration of Cylinder," Springer Books, in: Computational Mechanics, pages 240-240, Springer.
- S. Fu & S. Y. Huang, 2007. "Modelling the Compressibility Effect with Second-Moment Closure," Springer Books, in: Computational Mechanics, pages 241-241, Springer.
- Min Yang & Fujun Wang & Guohui Cong, 2007. "Numerical Simulation of Three Dimensional Turbulent Flow in Double-Suction Centrifugal Pumps," Springer Books, in: Computational Mechanics, pages 242-242, Springer.
- Wenbo Miao & Xiaoli Cheng & Qiang Wang, 2007. "Direct Numerical Simulation of a Compressible Turbulent Mixing Layer with Combustion Chemical Reactions," Springer Books, in: Computational Mechanics, pages 243-243, Springer.
- M. A. I. Khan & X. Y. Luo & F. Nicolleau & P. G. Tucker & G. Iacono, 2007. "Modelling Particle Deposition in a Turbulent Ribbed Channel Flow," Springer Books, in: Computational Mechanics, pages 244-244, Springer.
- Handong Ma & Honglu Pan, 2007. "Large Eddy Simulation for Compressible Plane Free Shear Layers Transition Process," Springer Books, in: Computational Mechanics, pages 245-245, Springer.
- Xuelin Tang & Fujun Wang, 2007. "Three-dimensional Dynamic LES Combined with Free Surface Poisson Equation," Springer Books, in: Computational Mechanics, pages 246-246, Springer.
- Yan Ding & Li Yuan, 2007. "Assessment of Two Versions of Ghost Fluid Method for 2D Multi-Medium Compressible Flow," Springer Books, in: Computational Mechanics, pages 247-247, Springer.
- H. Terasaka & S. Obayashi & N. Yamazaki, 2007. "Development of a Compressible Flow Analysis Code with a Generalized Equation of State," Springer Books, in: Computational Mechanics, pages 248-248, Springer.
- V. Gnanaraj & V. Mohan, 2007. "Numerical Simulation of Electroosmotic Flow through Circular and Triangular Microchannel with Different Aspect Ratios," Springer Books, in: Computational Mechanics, pages 249-249, Springer.
- Linlin Li & Jili Zhang, 2007. "3D Numerical Simulation of Single-Phase Flow in Micro-Channels of the Small Square Cylinders in the Electrolysis Oxygen Generation," Springer Books, in: Computational Mechanics, pages 250-250, Springer.
- Zhixue Guo & Er Huang & Xingnian Liu & Shuyou Cao, 2007. "Experimental Study on the Parameters That Cause River-Blocking by Debris Flow," Springer Books, in: Computational Mechanics, pages 251-251, Springer.
- C. G. Chen & F. Xiao, 2007. "A Global Shallow Water Model on the Spherical-Cubic Grid by using CIP/Multi-Moment FVM," Springer Books, in: Computational Mechanics, pages 252-252, Springer.
- J. H. Ran & Z. Q. Liu & P. Bai, 2007. "Investigation of the Local Morphing’s Influence on the Characteristics of Aerodynamics for Airfoil in Low-Re Flows," Springer Books, in: Computational Mechanics, pages 253-253, Springer.
- F. Xiao & S. Li & C. G. Chen, 2007. "High Order Multi-Moment Finite Volume Method and the Applications to Fluid Dynamics," Springer Books, in: Computational Mechanics, pages 254-254, Springer.
- F. J. Wang & C. L. Liao & X. L. Tang & J. M. Ma & Y. J. Li & W. Zhao, 2007. "Some Computational Issues on Fluid Dynamics in Large-Scale Hydraulic Turbines," Springer Books, in: Computational Mechanics, pages 255-255, Springer.
- H. J. Yan & Y. J. Ou & F. F. Yu & F. J. Wang, 2007. "Effect of Straightening Vane on Hydraulic Performances of Sprinkler by CFD Analysis," Springer Books, in: Computational Mechanics, pages 256-256, Springer.
- Peng Xie & Chaoqun Liu, 2007. "Uniform Weighted Compact and Non-Compact Scheme for Shock Entropy Interaction," Springer Books, in: Computational Mechanics, pages 257-257, Springer.
- Y. X. Zhang & J. Q. Chen & Z. Zeng & C. X. Wei & C. Wen, 2007. "Numerical Simulation of the Evolution of Focusing Shock Wave in Extracorporeal Shock Wave Lithotripsy by Using Space-Time Conservation Element and Solution Element Scheme," Springer Books, in: Computational Mechanics, pages 258-258, Springer.
- Hui Guan & Chuijie Wu & Shantung Tu, 2007. "Numerical Study of Flow Structures and the Intensity of Segmentation of Impinging Jets in Various Y Typed Micro Mixers," Springer Books, in: Computational Mechanics, pages 259-259, Springer.
- Decheng Wan, 2007. "Moving Grid-Multigrid Fictitious Boundary Method for the Simulation of Viscous Flow Past Many Moving Disks," Springer Books, in: Computational Mechanics, pages 260-260, Springer.
- Jiang Zhu & Xijun Yu, 2007. "Mathematical and Numerical Analysis of Thermally Coupled Quasi-Newtonian Flow Obeying a Power Law," Springer Books, in: Computational Mechanics, pages 261-261, Springer.
- Lingjiu Zhou & Zhengwei Wang, 2007. "Numerical Simulation of Traveling Bubble Cavitating Flow in a Francis Turbine," Springer Books, in: Computational Mechanics, pages 262-262, Springer.
- Hongdi He & Weizhen Lu & Liyun Dong & Shiqiang Dai, 2007. "Traffic Jam Formation in Traffic Flow on a Harbor Tunnel," Springer Books, in: Computational Mechanics, pages 263-263, Springer.
- G. H. Liu & Y. Zhang, 2007. "Area-Load Explanation, Locating and Estimating Min (Max) of BM," Springer Books, in: Computational Mechanics, pages 264-264, Springer.
- Shuoying Zhang, 2007. "Inelastic Analysis of Steel Frame Structures with the Member Endochronic Model," Springer Books, in: Computational Mechanics, pages 265-265, Springer.
- Z. W. Miao & X. Z. Lu & L. P. Ye & Q. L. Ma, 2007. "Simulation for the Collapse of RC Frame Tall Buildings under Earthquake Disaster," Springer Books, in: Computational Mechanics, pages 266-266, Springer.
- S. N. Huang & X. Z. Lu & L. P. Ye & Y. K. Liu, 2007. "Nonlinear Finite Element Analysis for a Prestressed Continuous Rigid Frame Concrete Bridge," Springer Books, in: Computational Mechanics, pages 267-267, Springer.
- Meiling Xiao & Liaoyuan Ye & Benyu Liu & Sheng Miao, 2007. "Estimating Seismic Energy in Frame Structure with Odd Exponent Wavelet," Springer Books, in: Computational Mechanics, pages 268-268, Springer.
- Jingzhong Xie, 2007. "Applications of the Integral Operators Method in Beam-Column Element," Springer Books, in: Computational Mechanics, pages 269-269, Springer.
- Z. H. Zhang & Q. S. Cao & X. Y. Fu & S. L. Dong, 2007. "Structural Design of the Large-Span Suspen-Dome," Springer Books, in: Computational Mechanics, pages 270-270, Springer.
- Yufeng Xing & Yang Yang, 2007. "A New Rod Eigenelement and Its Application to Structural Static and Dynamic Analysis," Springer Books, in: Computational Mechanics, pages 271-271, Springer.
- Jiang Ke, 2007. "A New Method for Solving Solid Structures," Springer Books, in: Computational Mechanics, pages 272-272, Springer.
- Fangjin Sun & Daming Zhang & Zhixiang Yin & Qikun Cao, 2007. "Research on Application of Reduced Order Model in Wind-Induced Vibration of Long-Span Structures," Springer Books, in: Computational Mechanics, pages 273-273, Springer.
- Dajian Han & Jing Li, 2007. "Application of Proper Orthogonal Decomposition Method in Wind Field Simulation for Roof Structures," Springer Books, in: Computational Mechanics, pages 274-274, Springer.
- M. Wang & X. Qiu & X. Zhang, 2007. "Mechanical Properties of Super Honeycomb Structures," Springer Books, in: Computational Mechanics, pages 275-275, Springer.
- Yuandong Liu & Haoran Chen, 2007. "Load Capacity Analysis of Laminated Composite Plates with Delamination under Static Loading," Springer Books, in: Computational Mechanics, pages 276-276, Springer.
- G. Li & X. Liu & Q. J. Yue, 2007. "Reliability Based Approach to Determine Design Ice Condition for Dynamic Performance Assessment of Jacket Platforms," Springer Books, in: Computational Mechanics, pages 277-277, Springer.
- H. -H. Lee & K. -W. Tseng & P. -Y. Chang, 2007. "The Application of Vector Form Intrinsic Finite Element Method to Template Offshore Structures," Springer Books, in: Computational Mechanics, pages 278-278, Springer.
- B. Tie, 2007. "Reliable and Efficient Modeling by Adaptive Methods for Structural Mechanics and Its Industrial Applications," Springer Books, in: Computational Mechanics, pages 279-279, Springer.
- Bin Xu & Xin Zong & Shaorong Yu & Weifeng Li & Zhigen Fan, 2007. "A Viscoelastic Analysis of Rubber Pretension Structures," Springer Books, in: Computational Mechanics, pages 280-280, Springer.
- Shaorong Yu & Jun Wang & Xueqian Chen & Shifu Xiao & Bing Xu & Yihui Yin, 2007. "Structural Dynamics Analysis of “Shenguang-III” Target System," Springer Books, in: Computational Mechanics, pages 281-281, Springer.
- J. Kong, 2007. "A Practical Method to Determine Influence Surfaces using Commercial Software," Springer Books, in: Computational Mechanics, pages 282-282, Springer.
- Y. B. Yin & S. M. Sun, 2007. "Seismic Response of a Concrete Viaduct Reinforced by Steel Braces," Springer Books, in: Computational Mechanics, pages 283-283, Springer.
- J. Li & X. Wu, 2007. "Application of Digit Image Processing Technique to the Analysis of Concrete Damage Process," Springer Books, in: Computational Mechanics, pages 284-284, Springer.
- Qing Zhang & Xiaozhou Xia, 2007. "Study on the Macro-Meso Constitutive Law of Concrete Material," Springer Books, in: Computational Mechanics, pages 285-285, Springer.
- Jianhua Cui & Haidong Su, 2007. "3-D FEM Emulation Computation on Surrounding Concrete of Steel Spiral Case Keeping Internal Pressure during Construction," Springer Books, in: Computational Mechanics, pages 286-286, Springer.
- Jian Zhou & Guang Ye & Erik Schlangen & Klaas van Breugel, 2007. "Modeling of Stresses and Strains in Bonded Concrete Overlays Subject to Differential Volume Changes," Springer Books, in: Computational Mechanics, pages 287-287, Springer.
- S. C. Chen & X. Z. Lu & A. Z. Ren & J. J. Jiang, 2007. "Fiber Beam Element Model for the Collapse Simulation of Concrete Structures under Fire," Springer Books, in: Computational Mechanics, pages 288-288, Springer.
- Juanxia Zhang & Chun’an Tang & Xiuyan Zhou & Xianzhang Guo, 2007. "Numerical Tests of Fracture Saturation in Reinforced Concrete Structure," Springer Books, in: Computational Mechanics, pages 289-289, Springer.
- Zhi-Liang Wang & Fenggang Ma, 2007. "A Simple Soil Model for Complex Loadings," Springer Books, in: Computational Mechanics, pages 290-290, Springer.
- Xiaojun Shi & Qingxia Yue & Jie Li, 2007. "Research on Design of Model in Shaking Table Test Considering Soil-Structure Interaction," Springer Books, in: Computational Mechanics, pages 291-291, Springer.
- G. W. Ma & X. J. Wang, 2007. "A Meshfree Particle Method to Simulate Discontinuous Rock Mass," Springer Books, in: Computational Mechanics, pages 292-292, Springer.
- J. S. Song & Y. Ohnishi & S. Nishiyama, 2007. "Rock Block Identification and 3D Simplex Integration," Springer Books, in: Computational Mechanics, pages 293-293, Springer.
- X. S. Hu & G. C. Chen & G. R. Li & H. L. Zhu & X. Q. Mao, 2007. "Study on Mechanical Effects of Shrub Roots for Slope Protection," Springer Books, in: Computational Mechanics, pages 294-294, Springer.
- P. X. Guo & S. Z. Lin, 2007. "Numerical Simulation Test on Mechanical Characteristics of Coarse Granular Materials by Discontinuous Deformation Analysis," Springer Books, in: Computational Mechanics, pages 295-295, Springer.
- W. G. Yang & Z. Q. Guo, 2007. "A Numerical Approach for the Simulation of Cementitious Materials," Springer Books, in: Computational Mechanics, pages 296-296, Springer.
- Z. Zhang & C. A. Tang & L. C. Li & T. H. Ma & S. B. Tang, 2007. "Strength Reduction Method on Stability Analysis of Tunnel," Springer Books, in: Computational Mechanics, pages 297-297, Springer.
- L. X. Tang & C. A. Tang, 2007. "Numerical Simulation and Analyze for Centrifuge Model Tests," Springer Books, in: Computational Mechanics, pages 298-298, Springer.
- Z. Cedric Xia, 2007. "Constitutive Modeling of Advanced High-Strength Steels for Springback Simulation," Springer Books, in: Computational Mechanics, pages 299-299, Springer.
- Z. Q. Guo & L. J. Sluys, 2007. "Computational Modelling for Description of Rubber-Like Materials with Permanent Deformation under Cyclic Loading," Springer Books, in: Computational Mechanics, pages 300-300, Springer.
- C. Y. Gao, 2007. "FE Realization of a Thermo-Visco-Plastic Constitutive Model using VUMAT in ABAQUS/Explicit Program," Springer Books, in: Computational Mechanics, pages 301-301, Springer.
- Fei Han & Junzhi Cui & Yan Yu, 2007. "Prediction for Mechanical Properties of Core-Shell Particle-filled Polymers via Statistical Two-Scale Method," Springer Books, in: Computational Mechanics, pages 302-302, Springer.
- M. L. Liu, 2007. "Various Formulations for Determining Displacements and Stresses in Wound Rolls," Springer Books, in: Computational Mechanics, pages 303-303, Springer.
- G. L. Xie & P. Zhang & S. G. Gong, 2007. "The Effective Modulus of Particle Modified Polymer Composites with Imperfect Interface," Springer Books, in: Computational Mechanics, pages 304-304, Springer.
- M. H. Liu & L. Feng, 2007. "Discussion of Two Crystal Plasticity Models Coupling with Anisotropic Damage for Finite Deformations," Springer Books, in: Computational Mechanics, pages 305-305, Springer.
- Q. S. Chen & G. Y. Deng, 2007. "Global Model for 8-inch Czochralski Silicon Crystal Growth Process," Springer Books, in: Computational Mechanics, pages 306-306, Springer.
- K. X. Zhang & J. N. Zhang, 2007. "Numerov Calculation of AlxGa1-xN/GaN Heterostructure," Springer Books, in: Computational Mechanics, pages 307-307, Springer.
- J. F. Nie & X. C. You & Z. Zhuang & X. D. Li, 2007. "A Numerical Implementation of a 3D Crystal Plasticity Model for Directionally Solidified Ni-Based Superalloy," Springer Books, in: Computational Mechanics, pages 308-308, Springer.
- H. Zhang & H. W. Zhang & Y. X. Gu, 2007. "A Three-Layer Model of the Mechanical Behaviour of Blood Vessel Walls," Springer Books, in: Computational Mechanics, pages 309-309, Springer.
- D. Y. Liu & F. Wang & C. Q. Ou & G. H. You & Z. Z. Tan, 2007. "Field Measurement and Numerical Simulation of Hydraulic Transients for Reversible Pump-Turbine Units with MGV Device," Springer Books, in: Computational Mechanics, pages 310-310, Springer.
- X. Y. Luo & M. Yin & P. Watton & J. Wang, 2007. "On the dynamic behaviour of chorded mitral valves," Springer Books, in: Computational Mechanics, pages 311-311, Springer.
- H. W. Song & G Yu & J. S. Tan & J. B. Di, 2007. "Intensity Field Design for Pistons and Cylinder Heads in the Laser Induced Thermal Loading System," Springer Books, in: Computational Mechanics, pages 312-312, Springer.
- Jun Wang & Zhiming Hao & Y. H. Yin & Pingan Shi & Bing Xu, 2007. "Analysis of Pre-Tightened Bolt Connections under Eccentric Load," Springer Books, in: Computational Mechanics, pages 313-313, Springer.
- B. J. Shi & D. W. Shu & B. Gu & M. R. Parlapalli & C. N. Delia & Q. Y. Ng, 2007. "Air Bearing Slider Simulation and Modeling for Hard Disk Drives with Ultra-Low Flying Heights," Springer Books, in: Computational Mechanics, pages 314-314, Springer.
- Qinshu He & Yohue Zhou, 2007. "The Influence of Charged Raindrops on Remote Sensing in Rain," Springer Books, in: Computational Mechanics, pages 315-315, Springer.
- Cheng Qiu & Mowen Xie & Tetsuro Esaki, 2007. "Application of GIS Technique in Three-Dimensional Slope Stability Analysis," Springer Books, in: Computational Mechanics, pages 316-316, Springer.
- Yongping Wang & Linbing Wang, 2007. "Back-Calculation of Material Properties of Asphalt Concrete using the APA Test," Springer Books, in: Computational Mechanics, pages 317-317, Springer.
- X. D. Wang & G. L. Huang, 2007. "Sinulation of Crack Identification in Elastic Solids using Surface Signals," Springer Books, in: Computational Mechanics, pages 318-318, Springer.
- H. H. Ge & J. Y. Xu, 2007. "Parameter Identification Method for Airport Pavement System," Springer Books, in: Computational Mechanics, pages 319-319, Springer.
- Xianlian Zhou & Jia Lu, 2007. "Inverse Formulation for Geometrically Exact Stress Resultant Shell," Springer Books, in: Computational Mechanics, pages 320-320, Springer.
- J. Lu & X. Zhao, 2007. "Pointwise Estimation of Material Parameters for Heterogeneous Nonlinear Hyperelastic Membranes: Computational Development," Springer Books, in: Computational Mechanics, pages 321-321, Springer.
- Y. Q. Li & M. S. Zhou & Z. H. Xiang & Z. Z. Cen, 2007. "Multi-type Sensor Placement Design for Damage Detection," Springer Books, in: Computational Mechanics, pages 322-322, Springer.
- J. Liu & X. Han, 2007. "Computational Inverse Procedure for Identification of Structural Dynamic Loads," Springer Books, in: Computational Mechanics, pages 323-323, Springer.
- S. Z. Peng & L. Cheng & Y. S. Choy & H. M. Sun, 2007. "Accurate and Efficient Prediction of Acoustical Performance of Noise Barriers against Transport Noise Pollution," Springer Books, in: Computational Mechanics, pages 324-324, Springer.
- C. Z. Tuo & Y. G. Bai & D. K. Sun & G. Liu & J. H. Lin, 2007. "Flutter Derivative Identification using Turbulence Modelling," Springer Books, in: Computational Mechanics, pages 325-325, Springer.
- H. D. Su & Y. Y. Huang, 2007. "A Localized Variational Principle and Hybrid Element Formulas for Fluid-Structure Coupling Harmonic Vibrations," Springer Books, in: Computational Mechanics, pages 326-326, Springer.
- Guowei Yang & Guannan Zheng & Dawei Chen, 2007. "Numerical Analyses of Static and Dynamic Aeroelasticity Based on Unstructured CFD/CSD Solver," Springer Books, in: Computational Mechanics, pages 327-327, Springer.
- X. C. Huang, 2007. "Coupled Fluid-Structure Analysis of Explosive Driven Fragmentation of Cylindrical Shell," Springer Books, in: Computational Mechanics, pages 328-328, Springer.
- Y. J. Hao & X. Z. Bai & X. H. Bo, 2007. "Deformation of an Elastic Thin Plate using ULE in Lateral Flow of Fluid," Springer Books, in: Computational Mechanics, pages 329-329, Springer.
- Xin Zong & Jun Mo & Demei Zhang & Bin Xu, 2007. "Analysis of High Performance Parallel Algorithms and Developable Environment for Nonlinear Mechanics of Static Structures," Springer Books, in: Computational Mechanics, pages 330-330, Springer.
- Min-Bin Chen & Chih-Hsueh Yang, 2007. "A Parallel 3D Delaunay Mesh Generation Method Based on Affected Zone," Springer Books, in: Computational Mechanics, pages 331-331, Springer.
- J. G. Ning & T. B. Ma & C. Liu & C. Wang, 2007. "Grid Subdivision Algorithm Based on the Young’s Interface Reconstruction Algorithm," Springer Books, in: Computational Mechanics, pages 332-332, Springer.
- Q. X. Wang, 2007. "Fully Nonlinear Ship- Wave Computations using Unstructured Mesh," Springer Books, in: Computational Mechanics, pages 333-333, Springer.
- Kailin Jian & Fanghao Xiao & Ying Chen, 2007. "Optimizing Dynamic Responses of Structures using Isight to Integrate NASTRAN," Springer Books, in: Computational Mechanics, pages 334-334, Springer.
- J. Chen & H. Terasaka & M. Kurihara & Y. Guo, 2007. "Integrated Numerical Analysis System for RSS21 Software: (3) GUI of FFB," Springer Books, in: Computational Mechanics, pages 335-335, Springer.
- T. Morris & C. F. McCulloch, 2007. "Fit for Purpose? The Effective Use of Numerical Simulation: a Review of Current Status and Future Needs, Quality Assurance, Education and Training," Springer Books, in: Computational Mechanics, pages 336-336, Springer.
- Minghui Hao & Hai Wu & Xiping Wang & Shenjie Zhou, 2007. "Element Free Method for Plane Stress Model I Crack with Couple Stress Effect," Springer Books, in: Computational Mechanics, pages 337-337, Springer.
- Jia Lu & Jing Qian, 2007. "Discrete Gradient Finite Point Method," Springer Books, in: Computational Mechanics, pages 338-338, Springer.
- D. A. Hu & X. Han & S. Y. Long, 2007. "A Modified Meshless Local Petrov-Galerkin Method for Nearly Incompressible Rubber Materials," Springer Books, in: Computational Mechanics, pages 339-339, Springer.
- Gaolian Liu & Zhiqiang Ye & Bo Chen, 2007. "A Variational Mesh-Free Method Based on Discretization via Directional Derivatives," Springer Books, in: Computational Mechanics, pages 340-340, Springer.
- Bonan Jiang & Guojun Liao, 2007. "The Least-Squares Meshfree Finite Element Method," Springer Books, in: Computational Mechanics, pages 341-341, Springer.
- Y. Q. Chen & S. Kulasegaram, 2007. "Numerical Modelling of Fracture in Particulate Composites using SPH Method," Springer Books, in: Computational Mechanics, pages 342-342, Springer.
- Hongfu Qiang & Weiran Gao, 2007. "A New SPH Equation Including Variable Smoothing Lengths Aspects and Its Implementation," Springer Books, in: Computational Mechanics, pages 343-343, Springer.
- S. C. Wu & H. O. Zhang & G. L. Wang & W. S. Xia, 2007. "Heat Transfer Applications of Meshless Local Petrov-Galerkin (MLPG) Method during Plasma Spray," Springer Books, in: Computational Mechanics, pages 344-344, Springer.
- L. F. Gao & Z. H. Yao, 2007. "Meshless Local Petrov-Galerkin (MLPG) “Mixed” Approach for Solving Incompressible N-S Equations," Springer Books, in: Computational Mechanics, pages 345-345, Springer.
- Dongdong Wang & Jiun-Shyan Chen, 2007. "Meshfree Analysis of Thin Plates using an Improved Stabilized Conforming Integration Method," Springer Books, in: Computational Mechanics, pages 346-346, Springer.
- W. Chen & H. Wang & Q. H. Qin, 2007. "Kernel Radial Basis Functions," Springer Books, in: Computational Mechanics, pages 347-347, Springer.
- S. S. Chen & Y. H. Liu & Z. Z. Cen, 2007. "Lower Bound Shakedown Analysis by Using the EFG Method and Nonlinear Programming," Springer Books, in: Computational Mechanics, pages 348-348, Springer.
- S. L. Chen & Y. X. Li & Z. P. Liao, 2007. "An Efficient Meshless Method for Simulating Wave Motions in Saturated Porous Media," Springer Books, in: Computational Mechanics, pages 349-349, Springer.
- Min Wang & Xiping Wang, 2007. "The Meshless Local Petrov-Galerkin (MLPG) Approach with Couple-Stress," Springer Books, in: Computational Mechanics, pages 350-350, Springer.
- H. B. Chen & D. J. Fu & P. Q. Zhang, 2007. "Adaptive Meshless LBIEM for the Analysis of 2D Elasticity Problems," Springer Books, in: Computational Mechanics, pages 351-351, Springer.
- H. T. Sun, 2007. "Meshless Virtual Boundary Method and Its Applications," Springer Books, in: Computational Mechanics, pages 352-352, Springer.
- Yu Miao & Junhai Wang & Y. Z. Sima & Yuanhan Wang, 2007. "Dual Reciprocity Hybrid Boundary Node Method for Solving Poisson Equations," Springer Books, in: Computational Mechanics, pages 353-353, Springer.
- D. Q. Yang & E. Y. Chen & G. P. Zhao, 2007. "Boundary Element Analysis of the Dual-Cavity Tunneling Seepage," Springer Books, in: Computational Mechanics, pages 354-354, Springer.
- H. M. Peng & D. Q. Yang & X. Y. Yang, 2007. "The Boundary Element Analysis of Bloodstream in the Bifurcation Deformity Blood Vessel," Springer Books, in: Computational Mechanics, pages 355-355, Springer.
- P. L. Xing & M. H. Huang & D. Q. Yang, 2007. "Boundary Element Method Analysis of Hydrodynamic Characteristics of the Three-Leaf Dislocated Floating-Ring Bearing," Springer Books, in: Computational Mechanics, pages 356-356, Springer.
- X. W. Gao, 2007. "An Effective Technique for Reducing Internal Points in RIBEM for Nonhomogeneous Media," Springer Books, in: Computational Mechanics, pages 357-357, Springer.
- Z. H. Yao & J. D. Xu & H. T. Wang, 2007. "Simulation of CNT Composites using Fast Multipole BEM," Springer Books, in: Computational Mechanics, pages 358-358, Springer.
- X. P. Zheng & B. Wang & Z. H. Yao, 2007. "Application of Boundary Element Method to Static Fluid-Solid Coupling Problems," Springer Books, in: Computational Mechanics, pages 359-359, Springer.
- Z.-S. Chen & H. Waubke, 2007. "An Improved Approach for Computing the Green Functions of the Helmholtz Equation in the 2D Impedance Half Space," Springer Books, in: Computational Mechanics, pages 360-360, Springer.
- L. Shen & Z. Chen, 2007. "Recent Advances in Multiscale Simulation of UNCD Strength," Springer Books, in: Computational Mechanics, pages 361-361, Springer.
- J. J. Wan & J. Z. Cui & F. Su, 2007. "Two-Scale Analysis for Dynamic Coupled Thermoelasticity Problems of Periodical Composite Materials," Springer Books, in: Computational Mechanics, pages 362-362, Springer.
- L. Zhang & J. Ouyang, 2007. "Multiscale Analysis and Numerical Simulations for Stability of Incompressible Periodic Flow of Maxwell Fluid," Springer Books, in: Computational Mechanics, pages 363-363, Springer.
- Yongping Feng & Mingxiang Deng, 2007. "The Multi-Scale Finite Element Computation for Piezoelectricity Problem in a Periodic Domain with the Mixed Boundary Conditions," Springer Books, in: Computational Mechanics, pages 364-364, Springer.
- Z. Zhuang & Z. L. Liu & X. C. You & Y. Guo, 2007. "Development of Multi-Scale Computation Framework to Investigate the Failure Behavior of the Materials," Springer Books, in: Computational Mechanics, pages 365-365, Springer.
- David Suddaby & Zachary Wise & Jinghong Fan, 2007. "Computational Multiscale Analysis for Interfacial Behavior of Bio-Layers and Medical Implants," Springer Books, in: Computational Mechanics, pages 366-366, Springer.
- Yuanwen Gao, 2007. "Magneto-Elastic-Plastic Buckling/Snapping and Bending of Cantilever Ferromagnetic Rectangular Plates," Springer Books, in: Computational Mechanics, pages 367-367, Springer.
- Bojing Zhu & Taiyan Qin, 2007. "Three-Dimensional Mixed-Mode Crack Growth Modeling in Electro-Magneto-Thermo-Elastic Coupled Viscoplastic Multiphase Composites by Time-Domain Hypersingular Integral Equation Method," Springer Books, in: Computational Mechanics, pages 368-368, Springer.
- L. Q. Cao & J. L. Luo, 2007. "Scale Gap, Scale Invariance and Multiphysical Modeling," Springer Books, in: Computational Mechanics, pages 369-369, Springer.
- Jixin Yang & Xiaoqin Wang & Fan Lei, 2007. "Computer Simulation on Structures of Single Walled Carbon Nanotubes," Springer Books, in: Computational Mechanics, pages 370-370, Springer.
- L. Wang & H. W. Zhang & J. B. Wang, 2007. "Buckling Behaviors of Double-Walled Carbon Nanotubes with Abnormal Interlayer Distances," Springer Books, in: Computational Mechanics, pages 371-371, Springer.
- M. S. Wu & K. Zhou & A. A. Nazarov, 2007. "Relaxation of a Rotational Defect in a Titanium Nanocylinder," Springer Books, in: Computational Mechanics, pages 372-372, Springer.
- R. S. McEntire & Y.-L. Shen, 2007. "Pramatic Atomistic Analysis of Nano-scale Metal Plasticity," Springer Books, in: Computational Mechanics, pages 373-373, Springer.
- L. Sun & J. Wang & Ray P. S. Han, 2007. "Manifestation of Strain Gradients in Nanostructural Vibration," Springer Books, in: Computational Mechanics, pages 374-374, Springer.
- Chein-Shan Liu, 2007. "Highly Accurate Numerical Solutions for Potential Problem and Singular Problem in Arbitrary Plane Domain," Springer Books, in: Computational Mechanics, pages 375-375, Springer.
- Cho W. S. To, 2007. "On Simple and Efficient Shell and Solid Finite Elements with Rotational Degrees of Freedom," Springer Books, in: Computational Mechanics, pages 376-376, Springer.
- H. Zhong & M. Gao, 2007. "Transverse Vibration Analysis of an Arbitrarily-Shaped Membrane by the Weak-Form Quadrature Element Method," Springer Books, in: Computational Mechanics, pages 377-377, Springer.
- K. Y. Sze & X. H. Liu, 2007. "A New Particle Model For Fabric Drap Simulation," Springer Books, in: Computational Mechanics, pages 378-378, Springer.
- W. X. Zhong & Q. Gao, 2007. "Harmony Element Method for Time and Space Domain," Springer Books, in: Computational Mechanics, pages 379-379, Springer.
- Song Cen & Xiaoming Chen & Xiangrong Fu & Yuqiu Long, 2007. "Some Recent Advances on the Quadrilateral Area Coordinate Method," Springer Books, in: Computational Mechanics, pages 380-380, Springer.
- Hongguang Li & Song Cen & Yuqiu Long & Zhangzhi Cen, 2007. "Method of Volume Coordinates — from Tetrahedral to Hexahedral Elements," Springer Books, in: Computational Mechanics, pages 381-381, Springer.
- Nanxiang Guan & Song Cen & Xiaoming Chen, 2007. "Quadrilateral Axisymmetric Elements Formulated by the Area Coordinate Method," Springer Books, in: Computational Mechanics, pages 382-382, Springer.
- A. P. Wang & Z. S. Tian, 2007. "A Quadrilateral Membrane Hybrid Stress Element with Drilling Degrees of Freedom," Springer Books, in: Computational Mechanics, pages 383-383, Springer.
- Q. P. Yang & Z. S. Tian, 2007. "Special Hybrid Multilayer Finite Elements for 3-D Stress Analyses around Holes in Laminated Composites," Springer Books, in: Computational Mechanics, pages 384-384, Springer.
- Canhui Zhang & Dongdong Wang & Jianlin Zhang, 2007. "An Investigation of Interlaminar Response for Laminated Composites using a Nonlinear Hybrid Stress Element," Springer Books, in: Computational Mechanics, pages 385-385, Springer.
- Wei Ju & Yuqiu Long & Xiangrong Fu & Song Cen, 2007. "A Hybrid Membrane Element Based on the Hamilton Variational Principle," Springer Books, in: Computational Mechanics, pages 386-386, Springer.
- Yimin Tian & Mengzhao Qin & Yongming Zhang & Tao Ma, 2007. "A Symplectic Scheme on Numerical Study for BEC," Springer Books, in: Computational Mechanics, pages 387-387, Springer.
- G. Chen, 2007. "A View on Manifold Method Comparing with Fintite Element Method," Springer Books, in: Computational Mechanics, pages 388-388, Springer.
- Q.Y. Zhu, 2007. "An Improved Finite Difference Scheme for Solving the Equation of Filtration Type in Porous Textiles with Phase Change Materials," Springer Books, in: Computational Mechanics, pages 389-389, Springer.
- Z. F. Nie & S. J. Zhou & K. Wang & S. L. Kong, 2007. "C 1 Natural Neighbor Interpolant based on the Extended Delaunay Triangulation," Springer Books, in: Computational Mechanics, pages 390-390, Springer.
- Cheng Luo & Xiangrong Fu & Jinsan Ju & Huipeng Liu, 2007. "Analysis of Sliding Cable Element," Springer Books, in: Computational Mechanics, pages 391-391, Springer.
- Xiangrong Fu & Yuqiu Long & Mingwu Yuan & Song Cen & Xiaoming Chen, 2007. "Study of the Analytical Trial Functions," Springer Books, in: Computational Mechanics, pages 392-392, Springer.
- Zaijiu Shang & Shuhong Song, 2007. "Structure-Preserving Finite Element Method on Topologically Nontrivial Domain," Springer Books, in: Computational Mechanics, pages 393-393, Springer.
- Dong Zhu, 2007. "Numerical Simulation of Surface Contact and Mixed Lubrication — Deterministic Approach vs. Stochastic Approach," Springer Books, in: Computational Mechanics, pages 394-394, Springer.
- W. W. Chen & W. Chen & J. Cao & C. Xia & R. Talwar & R. Lederich & Q. Wang, 2007. "Elasto-Plastic Rough Surface Contact Analysis for the Effects of Material Properties, Topographical Characteristics and Load," Springer Books, in: Computational Mechanics, pages 395-395, Springer.
- H. Owladeghaffari, 2007. "Contact State Analysis using NFIS & SOM," Springer Books, in: Computational Mechanics, pages 396-396, Springer.
- J. C. Xiao & J. Y. Mao & Y. Liu, 2007. "Frictional Slide Contact Element for Elastomeric Bearings of Prestressed Shallow Reticulated Shells during Construction," Springer Books, in: Computational Mechanics, pages 397-397, Springer.
- Y. L. Luo & H. Peng, 2007. "Application of 3D Coupled Joint Element in Contact Erosion Simulation," Springer Books, in: Computational Mechanics, pages 398-398, Springer.
- Lijie Li & Huajiang Ouyang & A. R. AbuBakar, 2007. "Numerical Analysis of Car Disc Brake Squeal Considering Thermal Effects," Springer Books, in: Computational Mechanics, pages 399-399, Springer.
- W. C. Peng & Z. He & J. Q. Wang, 2007. "An Efficient Method for Acoustic Response Prediction in the Mid-Frequency Range," Springer Books, in: Computational Mechanics, pages 400-400, Springer.
- Xuansheng Cheng & Yongfeng Du & Hui Li & Xiaoyu Shi, 2007. "Free Vibration of Liquid-Storage Tanks Based on Bending- Shearing Model," Springer Books, in: Computational Mechanics, pages 401-401, Springer.
- Baoquan Guo & Shilin Xie & Xinong Zhang, 2007. "The Nonlinear Vibration of Axially Moving Beam Impacted by High-Speed Moving Load," Springer Books, in: Computational Mechanics, pages 402-402, Springer.
- Y. H. Huang & X. Han, 2007. "Transient Analysis of Functionally Graded Materials Plate using Reduced-Basis Methods," Springer Books, in: Computational Mechanics, pages 403-403, Springer.
- Y. F. Wang & Y. Li & X. Y. Wang, 2007. "Nonlinear Vibration and Bifurcation Analysis for a Rotor with Seal and Bearing Excitations," Springer Books, in: Computational Mechanics, pages 404-404, Springer.
- Yajun Luq & Shilin Xie & Xinong Zhang, 2007. "Vibration Control of Honeycomb Sandwich Panel using Multi-Layer Piezoelectric Actuator," Springer Books, in: Computational Mechanics, pages 405-405, Springer.
- G. J. Nie & Z. Zhong, 2007. "Vibration Analysis of Functionally Graded Piezoelectric Annular Sectorial Plates," Springer Books, in: Computational Mechanics, pages 406-406, Springer.
- X. C. Shang & L. P. Qin & L. M. Liu, 2007. "Numerical Analysis for Vibration of Magnetostrictive Actuator," Springer Books, in: Computational Mechanics, pages 407-407, Springer.
- Rajib Chowdhury & B. N. Rao & A. Meher Prasad, 2007. "A Practical Solution of the Random Eigenvalue Problems using Factorized Decomposition Technique," Springer Books, in: Computational Mechanics, pages 408-408, Springer.
- J. B. Qiu & J. M. Wang & Z. P. Zhang, 2007. "Research on Virtual Dynamic Test Techniques for Space Vehicles," Springer Books, in: Computational Mechanics, pages 409-409, Springer.
- Jingjing Wang & Shuyong Liu & Shijian Zhu, 2007. "Study on Mechanism for Line Spectrum Reduction in Nonlinear Vibration Isolation system," Springer Books, in: Computational Mechanics, pages 410-410, Springer.
- D. K. Stoyko & N. Popplewell & A. H. Shah, 2007. "Modal Analysis of Transient Ultrasonic Guided Waves in a Cylinder," Springer Books, in: Computational Mechanics, pages 411-411, Springer.
- Peijun Wei & Li Zhang, 2007. "T-Matrix Method of Elastic Wave Scattering on Imperfect Interface," Springer Books, in: Computational Mechanics, pages 412-412, Springer.
- H. Bai, 2007. "Numerical Study of Wave Propagation and Reflection in Semi-Infinite Long Piezoelectric Cylinders," Springer Books, in: Computational Mechanics, pages 413-413, Springer.
- H. W. Yang & W. X. Zhong & Y. K. Sui, 2007. "Analysis of Dielectric Layer PBG Structure Using Precise Integration," Springer Books, in: Computational Mechanics, pages 414-414, Springer.
- Z. W. Guan & W. J. Cantwell, 2007. "Numerical Modeling of FMLs Subjected to a Projectile Impact," Springer Books, in: Computational Mechanics, pages 415-415, Springer.
- X. J. Dai & C. Z. Tuo & D. K. Sun & J. H. Lin, 2007. "Highly Efficient Atmospheric Turbulence Response Analysis of Composite Aircraft Wings Using Pseudo-Excitation Method," Springer Books, in: Computational Mechanics, pages 416-416, Springer.
- G. K. Er & V. P. Iu & H. T. Zhu & K. P. Kou, 2007. "PDF Solution of Nonlinear Stochastic Oscillators Excited by Poisson Pulse with EPC Method," Springer Books, in: Computational Mechanics, pages 417-417, Springer.
- J. W. Gao & Z. M. Cai, 2007. "Numeric Research of Chaotic Vibration for a Hard Stiffness Nonlinear Rod," Springer Books, in: Computational Mechanics, pages 418-418, Springer.
- Yiwen Zhu & Yuanqi Cai & Fang Han & Aiqing Ni & Hongqi Wang, 2007. "The Study on the Modifying Structural Dynamic Models Based on Information Fusion," Springer Books, in: Computational Mechanics, pages 419-419, Springer.
- S. G. Gong & G. L. Xie & J. P. Zhang & S. H. Nie & Y. M. Li, 2007. "Study on Sensitivity Analysis and Shape Optimization of FE-EFG Coupled Method," Springer Books, in: Computational Mechanics, pages 420-420, Springer.
- K. M. Zhou, 2007. "From Truss-Like Continua to Topology Optimum Trusses," Springer Books, in: Computational Mechanics, pages 421-421, Springer.
- Kai Liu & Hongzhe Xu & He Gao & Xiaohui Peng & Le Yao, 2007. "Research on Confirmation of Tension Leveller Basic Technological Parameters based on Neural Network and Genetic Algorithm," Springer Books, in: Computational Mechanics, pages 422-422, Springer.
- Yongtao Wei & Ying Sheng & Xiangguo Zeng, 2007. "Dynamic Optimization of Gyroscope Rubber Vibration Absorber Based on Genetic Algorithm," Springer Books, in: Computational Mechanics, pages 423-423, Springer.
- C. Yu & P. Pedregal, 2007. "A Variational Procedure for Optimal Design," Springer Books, in: Computational Mechanics, pages 424-424, Springer.
- K. Cui & G. W. Yang, 2007. "Aerodynamic Optimization of the Arc-Wing Missile," Springer Books, in: Computational Mechanics, pages 425-425, Springer.
- X. Liu & X. Han & G. L. Wen, 2007. "Optimization of Dynamic Characteristic of Airbag Landing Impact Attenuation," Springer Books, in: Computational Mechanics, pages 426-426, Springer.
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:sprbok:978-3-540-75999-7. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .
Please note that corrections may take a couple of weeks to filter through the various RePEc services.