IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v7y2015i7p9207-9230d52593.html
   My bibliography  Save this article

The Impact of Local Microclimate Boundary Conditions on Building Energy Performance

Author

Listed:
  • Anna Laura Pisello

    (CIRIAF—Interuniversity Research Center on Pollution and Environment "M. Felli", University of Perugia, Via G. Duranti 63, 06125 Perugia, Italy
    Department of Engineering, University of Perugia, Via G. Duranti 93, 06125 Perugia, Italy)

  • Gloria Pignatta

    (CIRIAF—Interuniversity Research Center on Pollution and Environment "M. Felli", University of Perugia, Via G. Duranti 63, 06125 Perugia, Italy)

  • Veronica Lucia Castaldo

    (CIRIAF—Interuniversity Research Center on Pollution and Environment "M. Felli", University of Perugia, Via G. Duranti 63, 06125 Perugia, Italy)

  • Franco Cotana

    (CIRIAF—Interuniversity Research Center on Pollution and Environment "M. Felli", University of Perugia, Via G. Duranti 63, 06125 Perugia, Italy
    Department of Engineering, University of Perugia, Via G. Duranti 93, 06125 Perugia, Italy)

Abstract

Local environmental boundaries play an important role in determining microclimate conditions affecting thermal-energy behavior of buildings. In this scenario, the purpose of the present work is to investigate how residential buildings are affected by different local microclimate conditions. To this aim, the continuous microclimate monitoring of (i) a rural area; (ii) a suburban area; and (iii) an urban area is carried out, and the comparative analysis of the different boundary conditions is performed. In particular, the effect of the presence of a large lake in the rural area on building energy demand for heating and cooling is evaluated, both in winter and summer. Coupled degree hour method and numerical analysis are performed in order to predict the energy requirement of buildings subject to local microclimate boundary conditions. The main results show higher air temperature and relative humidity values for the rural area. No significant mitigation effect due to the lake presence is found in urban and suburban areas because of the peculiar wind regime of the region. Additionally, the dynamic thermal-energy simulation shows a decrease of 14% and 25% in the heating consumption and an increase of 58% and 194% in cooling requirements of buildings situated in the rural area around the lake compared to the urban and suburban areas, respectively.

Suggested Citation

  • Anna Laura Pisello & Gloria Pignatta & Veronica Lucia Castaldo & Franco Cotana, 2015. "The Impact of Local Microclimate Boundary Conditions on Building Energy Performance," Sustainability, MDPI, vol. 7(7), pages 1-24, July.
    • Handle: RePEc:gam:jsusta:v:7:y:2015:i:7:p:9207-9230:d:52593
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/7/7/9207/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/7/7/9207/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Julian Canto-Perello & Maria P. Martinez-Garcia & Jorge Curiel-Esparza & Manuel Martin-Utrillas, 2015. "Implementing Sustainability Criteria for Selecting a Roof Assembly Typology in Medium Span Buildings," Sustainability, MDPI, vol. 7(6), pages 1-18, May.
    2. Gabriele Battista & Luca Evangelisti & Claudia Guattari & Carmine Basilicata & Roberto De Lieto Vollaro, 2014. "Buildings Energy Efficiency: Interventions Analysis under a Smart Cities Approach," Sustainability, MDPI, vol. 6(8), pages 1-12, July.
    3. Al-Hadhrami, L.M., 2013. "Comprehensive review of cooling and heating degree days characteristics over Kingdom of Saudi Arabia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 27(C), pages 305-314.
    4. Papakostas, K. & Kyriakis, N., 2005. "Heating and cooling degree-hours for Athens and Thessaloniki, Greece," Renewable Energy, Elsevier, vol. 30(12), pages 1873-1880.
    5. Francesco Bianchi & Anna Laura Pisello & Giorgio Baldinelli & Francesco Asdrubali, 2014. "Infrared Thermography Assessment of Thermal Bridges in Building Envelope: Experimental Validation in a Test Room Setup," Sustainability, MDPI, vol. 6(10), pages 1-14, October.
    6. Christos Giannakopoulos & Panos Hadjinicolaou & Christos Zerefos & George Demosthenous, 2009. "Changing Energy Requirements in the Mediterranean Under Changing Climatic Conditions," Energies, MDPI, vol. 2(4), pages 1-11, September.
    7. Chang Heon Cheong & Taeyeon Kim & Seung-Bok Leigh, 2014. "Thermal and Daylighting Performance of Energy-Efficient Windows in Highly Glazed Residential Buildings: Case Study in Korea," Sustainability, MDPI, vol. 6(10), pages 1-23, October.
    8. Karl Wagner, 2014. "Generation of a Tropically Adapted Energy Performance Certificate for Residential Buildings," Sustainability, MDPI, vol. 6(12), pages 1-17, November.
    9. Durmayaz, Ahmet & Kadıoǧlu, Mikdat & Şen, Zekai, 2000. "An application of the degree-hours method to estimate the residential heating energy requirement and fuel consumption in Istanbul," Energy, Elsevier, vol. 25(12), pages 1245-1256.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Fabrizio Ascione & Nicola Bianco & Claudio De Stasio & Gerardo Maria Mauro & Giuseppe Peter Vanoli, 2017. "Addressing Large-Scale Energy Retrofit of a Building Stock via Representative Building Samples: Public and Private Perspectives," Sustainability, MDPI, vol. 9(6), pages 1-18, June.
    2. Milena Vuckovic & Kristina Kiesel & Ardeshir Mahdavi, 2017. "The Extent and Implications of the Microclimatic Conditions in the Urban Environment: A Vienna Case Study," Sustainability, MDPI, vol. 9(2), pages 1-16, January.
    3. Bass, Brett & New, Joshua & Clinton, Nicholas & Adams, Mark & Copeland, Bill & Amoo, Charles, 2022. "How close are urban scale building simulations to measured data? Examining bias derived from building metadata in urban building energy modeling," Applied Energy, Elsevier, vol. 327(C).
    4. Toparlar, Y. & Blocken, B. & Maiheu, B. & van Heijst, G.J.F., 2018. "Impact of urban microclimate on summertime building cooling demand: A parametric analysis for Antwerp, Belgium," Applied Energy, Elsevier, vol. 228(C), pages 852-872.
    5. Shu Chen & Zhengen Ren & Zhi Tang & Xianrong Zhuo, 2021. "Long-Term Prediction of Weather for Analysis of Residential Building Energy Consumption in Australia," Energies, MDPI, vol. 14(16), pages 1-20, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. D'Amico, A. & Ciulla, G. & Panno, D. & Ferrari, S., 2019. "Building energy demand assessment through heating degree days: The importance of a climatic dataset," Applied Energy, Elsevier, vol. 242(C), pages 1285-1306.
    2. Krese, Gorazd & Lampret, Žiga & Butala, Vincenc & Prek, Matjaž, 2018. "Determination of a Building's balance point temperature as an energy characteristic," Energy, Elsevier, vol. 165(PB), pages 1034-1049.
    3. David Bienvenido-Huertas & Juan Antonio Fernández Quiñones & Juan Moyano & Carlos E. Rodríguez-Jiménez, 2018. "Patents Analysis of Thermal Bridges in Slab Fronts and Their Effect on Energy Demand," Energies, MDPI, vol. 11(9), pages 1-18, August.
    4. Ferdinando Salata & Iacopo Golasi & Emanuele De Lieto Vollaro & Fabio Bisegna & Fabio Nardecchia & Massimo Coppi & Franco Gugliermetti & Andrea De Lieto Vollaro, 2015. "Evaluation of Different Urban Microclimate Mitigation Strategies through a PMV Analysis," Sustainability, MDPI, vol. 7(7), pages 1-19, July.
    5. Özyurt, Ömer & Bakirci, Kadir & Erdoğan, Sadık & Yilmaz, Mehmet, 2009. "Bin weather data for the provinces of the Eastern Anatolia in Turkey," Renewable Energy, Elsevier, vol. 34(5), pages 1319-1332.
    6. Khuram Pervez Amber & Muhammad Waqar Aslam & Faraz Ikram & Anila Kousar & Hafiz Muhammad Ali & Naveed Akram & Kamran Afzal & Haroon Mushtaq, 2018. "Heating and Cooling Degree-Days Maps of Pakistan," Energies, MDPI, vol. 11(1), pages 1-12, January.
    7. Mehleri, Eugenia D. & Sarimveis, Haralambos & Markatos, Nikolaos C. & Papageorgiou, Lazaros G., 2012. "A mathematical programming approach for optimal design of distributed energy systems at the neighbourhood level," Energy, Elsevier, vol. 44(1), pages 96-104.
    8. Verbai, Zoltán & Lakatos, Ákos & Kalmár, Ferenc, 2014. "Prediction of energy demand for heating of residential buildings using variable degree day," Energy, Elsevier, vol. 76(C), pages 780-787.
    9. Coskun, C., 2010. "A novel approach to degree-hour calculation: Indoor and outdoor reference temperature based degree-hour calculation," Energy, Elsevier, vol. 35(6), pages 2455-2460.
    10. Mehleri, E.D. & Sarimveis, H. & Markatos, N.C. & Papageorgiou, L.G., 2013. "Optimal design and operation of distributed energy systems: Application to Greek residential sector," Renewable Energy, Elsevier, vol. 51(C), pages 331-342.
    11. Kaynakli, O., 2008. "A study on residential heating energy requirement and optimum insulation thickness," Renewable Energy, Elsevier, vol. 33(6), pages 1164-1172.
    12. Emanuele Bonamente & Franco Cotana, 2015. "Carbon and Energy Footprints of Prefabricated Industrial Buildings: A Systematic Life Cycle Assessment Analysis," Energies, MDPI, vol. 8(11), pages 1-17, November.
    13. Ucar, Aynur & Balo, Figen, 2009. "Effect of fuel type on the optimum thickness of selected insulation materials for the four different climatic regions of Turkey," Applied Energy, Elsevier, vol. 86(5), pages 730-736, May.
    14. Halil Alibaba, 2016. "Determination of Optimum Window to External Wall Ratio for Offices in a Hot and Humid Climate," Sustainability, MDPI, vol. 8(2), pages 1-21, February.
    15. Cinzia Buratti & Francesco Asdrubali & Domenico Palladino & Antonella Rotili, 2015. "Energy Performance Database of Building Heritage in the Region of Umbria, Central Italy," Energies, MDPI, vol. 8(7), pages 1-18, July.
    16. Gutiérrez, R. & Nafidi, A. & Gutiérrez Sánchez, R., 2005. "Forecasting total natural-gas consumption in Spain by using the stochastic Gompertz innovation diffusion model," Applied Energy, Elsevier, vol. 80(2), pages 115-124, February.
    17. Ahmed, T. & Muttaqi, K.M. & Agalgaonkar, A.P., 2012. "Climate change impacts on electricity demand in the State of New South Wales, Australia," Applied Energy, Elsevier, vol. 98(C), pages 376-383.
    18. Harkaitz García & Mikel Zubizarreta & Jesús Cuadrado & Juan Luis Osa, 2018. "Sustainability Improvement in the Design of Lightweight Roofs: A New Prototype of Hybrid Steel and Wood Purlins," Sustainability, MDPI, vol. 11(1), pages 1-17, December.
    19. Antoniadis, Christodoulos N. & Martinopoulos, Georgios, 2019. "Optimization of a building integrated solar thermal system with seasonal storage using TRNSYS," Renewable Energy, Elsevier, vol. 137(C), pages 56-66.
    20. Anja Hansen & Jörn Budde & Annette Prochnow, 2016. "Resource Usage Strategies and Trade-Offs between Cropland Demand, Fossil Fuel Consumption, and Greenhouse Gas Emissions—Building Insulation as an Example," Sustainability, MDPI, vol. 8(7), pages 1-24, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:7:y:2015:i:7:p:9207-9230:d:52593. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.