IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v41y2015icp777-798.html
   My bibliography  Save this article

Biodiesel properties and automotive system compatibility issues

Author

Listed:
  • Sorate, Kamalesh A.
  • Bhale, Purnanand V.

Abstract

Acceptability of biodiesel by automotive sector is limited due to some of its adverse properties such as cold flow properties, oxidation stability and corrosiveness with automotive fuel system materials. Adverse cold flow properties of biodiesel lead to the problem of plugging and gumming of filters and injectors. There is a concern about the poor oxidation stability of biodiesel, which results in the formation of sediments and gums causing problem in the engine fuel injection system. Biodiesel reacts with automotive fuel system materials adversely resulting in corrosion of metals and degradation of elastomers. Beside these adverse issues, biodiesel possesses incredible inherent lubricity.

Suggested Citation

  • Sorate, Kamalesh A. & Bhale, Purnanand V., 2015. "Biodiesel properties and automotive system compatibility issues," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 777-798.
    • Handle: RePEc:eee:rensus:v:41:y:2015:i:c:p:777-798
    DOI: 10.1016/j.rser.2014.08.079
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032114007655
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2014.08.079?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Tomic, Milan & Savin, Lazar & Micic, Radoslav & Simikic, Mirko & Furman, Timofej, 2014. "Possibility of using biodiesel from sunflower oil as an additive for the improvement of lubrication properties of low-sulfur diesel fuel," Energy, Elsevier, vol. 65(C), pages 101-108.
    2. Bhale, Purnanand Vishwanathrao & Deshpande, Nishikant V. & Thombre, Shashikant B., 2009. "Improving the low temperature properties of biodiesel fuel," Renewable Energy, Elsevier, vol. 34(3), pages 794-800.
    3. Lamba, Bhawna Yadav & Joshi, Girdhar & Tiwari, Avanish K. & Rawat, Devendra Singh & Mallick, Sudesh, 2013. "Effect of antioxidants on physico-chemical properties of EURO-III HSD (high speed diesel) and Jatropha biodiesel blends," Energy, Elsevier, vol. 60(C), pages 222-229.
    4. Haseeb, A.S.M.A. & Sia, S.Y. & Fazal, M.A. & Masjuki, H.H., 2010. "Effect of temperature on tribological properties of palm biodiesel," Energy, Elsevier, vol. 35(3), pages 1460-1464.
    5. Trakarnpruk, Wimonrat & Porntangjitlikit, Suriya, 2008. "Palm oil biodiesel synthesized with potassium loaded calcined hydrotalcite and effect of biodiesel blend on elastomer properties," Renewable Energy, Elsevier, vol. 33(7), pages 1558-1563.
    6. Chen, Yi-Hung & Chen, Jhih-Hong & Luo, Yu-Min & Shang, Neng-Chou & Chang, Cheng-Hsin & Chang, Ching-Yuan & Chiang, Pen-Chi & Shie, Je-Lueng, 2011. "Property modification of jatropha oil biodiesel by blending with other biodiesels or adding antioxidants," Energy, Elsevier, vol. 36(7), pages 4415-4421.
    7. Sarin, Amit & Arora, Rajneesh & Singh, N.P. & Sarin, Rakesh & Malhotra, R.K. & Sharma, Meeta & Khan, Arif Ali, 2010. "Synergistic effect of metal deactivator and antioxidant on oxidation stability of metal contaminated Jatropha biodiesel," Energy, Elsevier, vol. 35(5), pages 2333-2337.
    8. Pullen, James & Saeed, Khizer, 2012. "An overview of biodiesel oxidation stability," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(8), pages 5924-5950.
    9. Haseeb, A.S.M.A. & Masjuki, H.H. & Siang, C.T. & Fazal, M.A., 2010. "Compatibility of elastomers in palm biodiesel," Renewable Energy, Elsevier, vol. 35(10), pages 2356-2361.
    10. Jain, Siddharth & Sharma, M.P., 2010. "Review of different test methods for the evaluation of stability of biodiesel," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(7), pages 1937-1947, September.
    11. Anastopoulos, G. & Lois, E. & Karonis, D. & Kalligeros, S. & Zannikos, F., 2005. "Impact of oxygen and nitrogen compounds on the lubrication properties of low sulfur diesel fuels," Energy, Elsevier, vol. 30(2), pages 415-426.
    12. Karavalakis, Georgios & Hilari, Despina & Givalou, Lida & Karonis, Dimitrios & Stournas, Stamos, 2011. "Storage stability and ageing effect of biodiesel blends treated with different antioxidants," Energy, Elsevier, vol. 36(1), pages 369-374.
    13. Moser, Bryan R., 2011. "Influence of extended storage on fuel properties of methyl esters prepared from canola, palm, soybean and sunflower oils," Renewable Energy, Elsevier, vol. 36(4), pages 1221-1226.
    14. Smith, Paul C. & Ngothai, Yung & Dzuy Nguyen, Q. & O'Neill, Brian K., 2010. "Improving the low-temperature properties of biodiesel: Methods and consequences," Renewable Energy, Elsevier, vol. 35(6), pages 1145-1151.
    15. Meher, L.C. & Vidya Sagar, D. & Naik, S.N., 2006. "Technical aspects of biodiesel production by transesterification--a review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 10(3), pages 248-268, June.
    16. Boonyongmaneerat, Yuttanant & Sukjamsri, Chamaiporn & Sahapatsombut, Ukrit & Saenapitak, Sawalee & Sukkasi, Sittha, 2011. "Investigation of electrodeposited Ni-based coatings for biodiesel storage," Applied Energy, Elsevier, vol. 88(3), pages 909-913, March.
    17. Serrano, Marta & Oliveros, Rubén & Sánchez, Marcos & Moraschini, Andrea & Martínez, Mercedes & Aracil, José, 2014. "Influence of blending vegetable oil methyl esters on biodiesel fuel properties: Oxidative stability and cold flow properties," Energy, Elsevier, vol. 65(C), pages 109-115.
    18. Joshi, Hem & Moser, Bryan R. & Toler, Joe & Smith, William F. & Walker, Terry, 2010. "Effects of blending alcohols with poultry fat methyl esters on cold flow properties," Renewable Energy, Elsevier, vol. 35(10), pages 2207-2210.
    19. Singh, B. & Korstad, John & Sharma, Y.C., 2012. "A critical review on corrosion of compression ignition (CI) engine parts by biodiesel and biodiesel blends and its inhibition," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 3401-3408.
    20. Muñoz, M. & Moreno, F. & Monné, C. & Morea, J. & Terradillos, J., 2011. "Biodiesel improves lubricity of new low sulphur diesel fuels," Renewable Energy, Elsevier, vol. 36(11), pages 2918-2924.
    21. Sarin, Amit & Arora, Rajneesh & Singh, N.P. & Sharma, Meeta & Malhotra, R.K., 2009. "Influence of metal contaminants on oxidation stability of Jatropha biodiesel," Energy, Elsevier, vol. 34(9), pages 1271-1275.
    22. Haseeb, A.S.M.A. & Jun, T.S. & Fazal, M.A. & Masjuki, H.H., 2011. "Degradation of physical properties of different elastomers upon exposure to palm biodiesel," Energy, Elsevier, vol. 36(3), pages 1814-1819.
    23. Dwivedi, Gaurav & Sharma, M.P., 2014. "Impact of cold flow properties of biodiesel on engine performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 31(C), pages 650-656.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jakeria, M.R. & Fazal, M.A. & Haseeb, A.S.M.A., 2014. "Influence of different factors on the stability of biodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 154-163.
    2. Shahabuddin, M. & Kalam, M.A. & Masjuki, H.H. & Bhuiya, M.M.K. & Mofijur, M., 2012. "An experimental investigation into biodiesel stability by means of oxidation and property determination," Energy, Elsevier, vol. 44(1), pages 616-622.
    3. Fazal, M.A. & Haseeb, A.S.M.A. & Masjuki, H.H., 2011. "Biodiesel feasibility study: An evaluation of material compatibility; performance; emission and engine durability," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(2), pages 1314-1324, February.
    4. Sundus, F. & Fazal, M.A. & Masjuki, H.H., 2017. "Tribology with biodiesel: A study on enhancing biodiesel stability and its fuel properties," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 399-412.
    5. Sierra-Cantor, Jonathan Fabián & Guerrero-Fajardo, Carlos Alberto, 2017. "Methods for improving the cold flow properties of biodiesel with high saturated fatty acids content: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 774-790.
    6. Roveda, Ana Carolina & Comin, Marina & Caires, Anderson Rodrigues Lima & Ferreira, Valdir Souza & Trindade, Magno Aparecido Gonçalves, 2016. "Thermal stability enhancement of biodiesel induced by a synergistic effect between conventional antioxidants and an alternative additive," Energy, Elsevier, vol. 109(C), pages 260-265.
    7. Fernandes, David M. & Squissato, André L. & Lima, Alexandre F. & Richter, Eduardo M. & Munoz, Rodrigo A.A., 2019. "Corrosive character of Moringa oleifera Lam biodiesel exposed to carbon steel under simulated storage conditions," Renewable Energy, Elsevier, vol. 139(C), pages 1263-1271.
    8. Yaakob, Zahira & Narayanan, Binitha N. & Padikkaparambil, Silija & Unni K., Surya & Akbar P., Mohammed, 2014. "A review on the oxidation stability of biodiesel," Renewable and Sustainable Energy Reviews, Elsevier, vol. 35(C), pages 136-153.
    9. Ali, Obed M. & Mamat, Rizalman & Abdullah, Nik R. & Abdullah, Abdul Adam, 2016. "Analysis of blended fuel properties and engine performance with palm biodiesel–diesel blended fuel," Renewable Energy, Elsevier, vol. 86(C), pages 59-67.
    10. Haseeb, A.S.M.A. & Jun, T.S. & Fazal, M.A. & Masjuki, H.H., 2011. "Degradation of physical properties of different elastomers upon exposure to palm biodiesel," Energy, Elsevier, vol. 36(3), pages 1814-1819.
    11. Chandran, Davannendran, 2020. "Compatibility of diesel engine materials with biodiesel fuel," Renewable Energy, Elsevier, vol. 147(P1), pages 89-99.
    12. Rizwanul Fattah, I.M. & Masjuki, H.H. & Kalam, M.A. & Hazrat, M.A. & Masum, B.M. & Imtenan, S. & Ashraful, A.M., 2014. "Effect of antioxidants on oxidation stability of biodiesel derived from vegetable and animal based feedstocks," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 356-370.
    13. Fazal, M.A. & Haseeb, A.S.M.A. & Masjuki, H.H., 2012. "Degradation of automotive materials in palm biodiesel," Energy, Elsevier, vol. 40(1), pages 76-83.
    14. Lawan, Ibrahim & Zhou, Weiming & Garba, Zaharaddeen Nasiru & Zhang, Mingxin & Yuan, Zhanhui & Chen, Lihui, 2019. "Critical insights into the effects of bio-based additives on biodiesels properties," Renewable and Sustainable Energy Reviews, Elsevier, vol. 102(C), pages 83-95.
    15. Lanjekar, R.D. & Deshmukh, D., 2016. "A review of the effect of the composition of biodiesel on NOx emission, oxidative stability and cold flow properties," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 1401-1411.
    16. Rawat, Devendra S. & Joshi, Girdhar & Lamba, Bhawna Y. & Tiwari, Avanish K. & Kumar, Pankaj, 2015. "The effect of binary antioxidant proportions on antioxidant synergy and oxidation stability of Jatropha and Karanja biodiesels," Energy, Elsevier, vol. 84(C), pages 643-655.
    17. Fazal, M.A. & Jakeria, M.R. & Haseeb, A.S.M.A. & Rubaiee, Saeed, 2017. "Effect of antioxidants on the stability and corrosiveness of palm biodiesel upon exposure of different metals," Energy, Elsevier, vol. 135(C), pages 220-226.
    18. Meher, L.C. & Churamani, C.P. & Arif, Md. & Ahmed, Z. & Naik, S.N., 2013. "Jatropha curcas as a renewable source for bio-fuels—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 26(C), pages 397-407.
    19. Misra, R.D. & Murthy, M.S., 2011. "Blending of additives with biodiesels to improve the cold flow properties, combustion and emission performance in a compression ignition engine--A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(5), pages 2413-2422, June.
    20. Singh, B. & Korstad, John & Sharma, Y.C., 2012. "A critical review on corrosion of compression ignition (CI) engine parts by biodiesel and biodiesel blends and its inhibition," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 3401-3408.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:41:y:2015:i:c:p:777-798. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.