IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v242y2024ics0951832023006993.html
   My bibliography  Save this article

Importance-based system cost management and failure risk analysis for different phases in life cycle

Author

Listed:
  • Dui, Hongyan
  • Lu, Yaohui
  • Chen, Liwei

Abstract

System life cycle can be divided into four phases: the production phase, the operation phase, maintenance phase and the end-of-life phase. Component failure leads to the different variable costs in different phases. Existing studies have investigated systems from a cost-effectiveness perspective of the operation and maintenance stage, which may not be holistic. Furthermore, the expected failure cost can be used to evaluate the failure risk. In this paper, a generalized system cost for different phases is analyzed in life cycle, then a risk optimization is studied based on an improvement importance. Firstly, a comprehensive life cycle cost model is proposed. Specifically, the operation and maintenance costs due to the different types of component failures are discussed, respectively. Besides, a specific selection method for performing end-of-life in case of component failure is given using the recovery importance. Secondly, an improvement importance is proposed to optimize system reliability under invariant resources. Thirdly, the specific process of the failure risk under limited resource using improvement importance is analyzed. Finally, the proposed methods are verified using two applications, and a discussion on unlimited resources for risk optimization is given.

Suggested Citation

  • Dui, Hongyan & Lu, Yaohui & Chen, Liwei, 2024. "Importance-based system cost management and failure risk analysis for different phases in life cycle," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    • Handle: RePEc:eee:reensy:v:242:y:2024:i:c:s0951832023006993
    DOI: 10.1016/j.ress.2023.109785
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832023006993
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2023.109785?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Compare, Michele & Antonello, Federico & Pinciroli, Luca & Zio, Enrico, 2022. "A general model for life-cycle cost analysis of Condition-Based Maintenance enabled by PHM capabilities," Reliability Engineering and System Safety, Elsevier, vol. 224(C).
    2. Dui, Hongyan & Si, Shubin & Yam, Richard C.M., 2017. "A cost-based integrated importance measure of system components for preventive maintenance," Reliability Engineering and System Safety, Elsevier, vol. 168(C), pages 98-104.
    3. Di Maio, Francesco & Marchetti, Stefano & Zio, Enrico, 2023. "Robust multi-objective optimization of safety barriers performance parameters for NaTech scenarios risk assessment and management," Reliability Engineering and System Safety, Elsevier, vol. 235(C).
    4. Levitin, Gregory & Finkelstein, Maxim & Li, Yan-Feng, 2020. "Balancing mission success probability and risk of system loss by allocating redundancy in systems operating with a rescue option," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    5. Levitin, Gregory & Finkelstein, Maxim & Dai, Yuanshun, 2018. "Mission abort policy balancing the uncompleted mission penalty and system loss risk," Reliability Engineering and System Safety, Elsevier, vol. 176(C), pages 194-201.
    6. Gandhi, Oktoviano & Rodríguez-Gallegos, Carlos D. & Zhang, Wenjie & Reindl, Thomas & Srinivasan, Dipti, 2022. "Levelised cost of PV integration for distribution networks," Renewable and Sustainable Energy Reviews, Elsevier, vol. 169(C).
    7. Levitin, Gregory & Xing, Liudong & Dai, Yuanshun, 2022. "Minimizing mission cost for production system with unreliable storage," Reliability Engineering and System Safety, Elsevier, vol. 227(C).
    8. Chen, Liwei & Cheng, Chunchun & Dui, Hongyan & Xing, Liudong, 2022. "Maintenance cost-based importance analysis under different maintenance strategies," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    9. Kristjanpoller, Fredy & Cárdenas-Pantoja, Nicolás & Viveros, Pablo & Pascual, Rodrigo, 2023. "Wind farm life cycle cost modelling based on oversizing capacity under load sharing configuration," Reliability Engineering and System Safety, Elsevier, vol. 236(C).
    10. Juybari, Mohammad N. & Hamadani, Ali Zeinal & Ardakan, Mostafa Abouei, 2023. "Availability analysis and cost optimization of a repairable system with a mix of active and warm-standby components in a shock environment," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    11. Dui, Hongyan & Lu, Yaohui & Gao, Zhanfei & Xing, Liudong, 2023. "Performance efficiency and cost analysis of multi-state systems with successive damage and maintenance in multiple shock events," Reliability Engineering and System Safety, Elsevier, vol. 238(C).
    12. Parhizkar, Tarannom & Hogenboom, Sandra & Vinnem, Jan Erik & Utne, Ingrid Bouwer, 2020. "Data driven approach to risk management and decision support for dynamic positioning systems," Reliability Engineering and System Safety, Elsevier, vol. 201(C).
    13. Zheng, Xiaoyu & Tamaki, Hitoshi & Sugiyama, Tomoyuki & Maruyama, Yu, 2022. "Dynamic probabilistic risk assessment of nuclear power plants using multi-fidelity simulations," Reliability Engineering and System Safety, Elsevier, vol. 223(C).
    14. Dui, Hongyan & Xu, Huiting & Zhang, Luyu & Wang, Jia, 2023. "Cost-based preventive maintenance of industrial robot system," Reliability Engineering and System Safety, Elsevier, vol. 240(C).
    15. Liu, Tao & Bai, Guanghan & Tao, Junyong & Zhang, Yun-An & Fang, Yining, 2024. "A Multistate Network Approach for Resilience Analysis of UAV Swarm considering Information Exchange Capacity," Reliability Engineering and System Safety, Elsevier, vol. 241(C).
    16. Pang, Bizhao & Hu, Xinting & Dai, Wei & Low, Kin Huat, 2022. "UAV path optimization with an integrated cost assessment model considering third-party risks in metropolitan environments," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    17. Francesco Di Maio & Stefano Marchetti & Enrico Zio, 2023. "Robust multi-objective optimization of safety barriers performance parameters for NaTech scenarios risk assessment and management," Post-Print hal-04103505, HAL.
    18. Levitin, Gregory & Xing, Liudong & Dai, Yuanshun, 2018. "Co-residence based data vulnerability vs. security in cloud computing system with random server assignment," European Journal of Operational Research, Elsevier, vol. 267(2), pages 676-686.
    19. Jayaraman, Deepan & Ramu, Palaniappan, 2023. "L-moments and Bayesian inference for probabilistic risk assessment with scarce samples that include extremes," Reliability Engineering and System Safety, Elsevier, vol. 235(C).
    20. Wang, Ning & Gao, Ying & He, Jia-tao & Yang, Jun, 2022. "Robustness evaluation of the air cargo network considering node importance and attack cost," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    21. Rocchetta, R. & Li, Y.F. & Zio, E., 2015. "Risk assessment and risk-cost optimization of distributed power generation systems considering extreme weather conditions," Reliability Engineering and System Safety, Elsevier, vol. 136(C), pages 47-61.
    22. Dui, Hongyan & Li, Shumin & Xing, Liudong & Liu, Hanlin, 2019. "System performance-based joint importance analysis guided maintenance for repairable systems," Reliability Engineering and System Safety, Elsevier, vol. 186(C), pages 162-175.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Dui, Hongyan & Zhang, Chi & Tian, Tianzi & Wu, Shaomin, 2022. "Different costs-informed component preventive maintenance with system lifetime changes," Reliability Engineering and System Safety, Elsevier, vol. 228(C).
    2. Dui, Hongyan & Liu, Meng & Song, Jiaying & Wu, Shaomin, 2023. "Importance measure-based resilience management: Review, methodology and perspectives on maintenance," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    3. Dui, Hongyan & Zhang, Yulu & Bai, Guanghan, 2024. "Analysis of variable system cost and maintenance strategy in life cycle considering different failure modes," Reliability Engineering and System Safety, Elsevier, vol. 243(C).
    4. Levitin, Gregory & Xing, Liudong & Xiang, Yanping & Dai, Yuanshun, 2021. "Mixed failure-driven and shock-driven mission aborts in heterogeneous systems with arbitrary structure," Reliability Engineering and System Safety, Elsevier, vol. 212(C).
    5. Fan, Dongming & Zhang, Aibo & Feng, Qiang & Cai, Baoping & Liu, Yiliu & Ren, Yi, 2021. "Group maintenance optimization of subsea Xmas trees with stochastic dependency," Reliability Engineering and System Safety, Elsevier, vol. 209(C).
    6. Dui, Hongyan & Wu, Shaomin & Zhao, Jiangbin, 2021. "Some extensions of the component maintenance priority," Reliability Engineering and System Safety, Elsevier, vol. 214(C).
    7. Khakzad, Nima, 2023. "A goal programming approach to multi-objective optimization of firefighting strategies in the event of domino effects," Reliability Engineering and System Safety, Elsevier, vol. 239(C).
    8. Dui, Hongyan & Tian, Tianzi & Wu, Shaomin & Xie, Min, 2023. "A cost-informed component maintenance index and its applications," Reliability Engineering and System Safety, Elsevier, vol. 230(C).
    9. Cheraghi, Morteza & Taghipour, Sharareh, 2024. "A mathematical optimization model for determining safety integrity levels in process facilities," Reliability Engineering and System Safety, Elsevier, vol. 243(C).
    10. Zhao, Xian & Guo, Bin & Chen, Yuan, 2024. "A condition-based inspection-maintenance policy for critical systems with an unreliable monitor system," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    11. Chen, Liwei & Gao, Yansan & Dui, Hongyan & Xing, Liudong, 2021. "Importance measure-based maintenance optimization strategy for pod slewing system," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    12. Zhao, Jiangbin & Si, Shubin & Cai, Zhiqiang & Guo, Peng & Zhu, Wenjin, 2020. "Mission success probability optimization for phased-mission systems with repairable component modules," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    13. Cai, Jitao & Wu, Jiansong & Yuan, Shuaiqi & Reniers, Genserik & Bai, Yiping, 2024. "Risk-based optimization of emergency response systems for accidental gas leakage in utility tunnels," Reliability Engineering and System Safety, Elsevier, vol. 244(C).
    14. Hongyan Dui & Huiting Xu & Yun-An Zhang, 2022. "Reliability Analysis and Redundancy Optimization of a Command Post Phased-Mission System," Mathematics, MDPI, vol. 10(22), pages 1-15, November.
    15. Chen, Yuan & Qiu, Qingan & Zhao, Xian, 2022. "Condition-based opportunistic maintenance policies with two-phase inspections for continuous-state systems," Reliability Engineering and System Safety, Elsevier, vol. 228(C).
    16. Liu, Mingli & Wang, Dan & Si, Shubin, 2024. "Solving algorithm design for the cost minimization reliability optimization model driven by a novel cost-based importance measure," Reliability Engineering and System Safety, Elsevier, vol. 244(C).
    17. Yadong Zhang & Chao Zhang & Shaoping Wang & Rentong Chen & Mileta M. Tomovic, 2022. "Performance Degradation Based on Importance Change and Application in Dissimilar Redundancy Actuation System," Mathematics, MDPI, vol. 10(5), pages 1-15, March.
    18. Zhao, Xian & He, Zongda & Wu, Yaguang & Qiu, Qingan, 2022. "Joint optimization of condition-based performance control and maintenance policies for mission-critical systems," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    19. Dhulipala, Somayajulu L.N. & Shields, Michael D. & Chakroborty, Promit & Jiang, Wen & Spencer, Benjamin W. & Hales, Jason D. & Labouré, Vincent M. & Prince, Zachary M. & Bolisetti, Chandrakanth & Che, 2022. "Reliability estimation of an advanced nuclear fuel using coupled active learning, multifidelity modeling, and subset simulation," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    20. Fangyu Liu & Hongyan Dui & Ziyue Li, 2022. "Reliability analysis for electrical power systems based on importance measures," Journal of Risk and Reliability, , vol. 236(2), pages 317-328, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:242:y:2024:i:c:s0951832023006993. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.