IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v162y2016icp622-630.html
   My bibliography  Save this article

Smart polygeneration grids: experimental performance curves of different prime movers

Author

Listed:
  • Ferrari, Mario L.
  • Traverso, Alberto
  • Massardo, Aristide F.

Abstract

This paper shows the performance curves obtained with an experimental campaign on the following different prime movers: a 100kW microturbine, a 20kW internal combustion engine, a 450kW SOFC-based hybrid system and a 100kW absorption chiller. While the size related to the microturbine and the engine are actual electrical power values, the hybrid system size is an electrical virtual power (an emulator rig was used for this plant) and the chiller value is a cooling thermal power. These experimental results were obtained with a smart polygeneration facility installed in the Innovative Energy Systems Laboratory by the Thermochemical Power Group of the University of Genoa. This facility was designed to perform tests on smart grids equipped with different generation technologies to develop and improve innovative control and optimization tools. The performance curves were obtained with two different approaches: tests on real prime movers (for the microturbine, the engine and the chiller) or measurements on an emulator rig (for the hybrid system). In this second case, the tests were carried out using an experimental facility based on the coupling of a second microturbine with a modular vessel. A real-time simulation software was used for components not physically present in the experimental plant. These results are a significant improvement in comparison with the available data, because experimental results are presented for different prime movers in different operative conditions (both design and part-load operations). Moreover, since both manufacturers and users are not usually able to control air inlet temperature, special attention was devoted to the ambient temperature impact on the 100kW microturbine because this property has a strong influence on the performance of this machine. For this reason, empirical correlations on the ambient temperature effect were obtained from the experiments with the objective to perform an easy implementation of the optimization tools. Experimental performance curves (including several off-design conditions) are essential for smart grid management because (if they are implemented in optimization tools) they allow to find real optimal solutions (while tools based on linear or calculated correlations can obtain results affected by significant errors).

Suggested Citation

  • Ferrari, Mario L. & Traverso, Alberto & Massardo, Aristide F., 2016. "Smart polygeneration grids: experimental performance curves of different prime movers," Applied Energy, Elsevier, vol. 162(C), pages 622-630.
    • Handle: RePEc:eee:appene:v:162:y:2016:i:c:p:622-630
    DOI: 10.1016/j.apenergy.2015.10.144
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261915013860
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2015.10.144?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wang, Junye, 2015. "Barriers of scaling-up fuel cells: Cost, durability and reliability," Energy, Elsevier, vol. 80(C), pages 509-521.
    2. Dalla Rosa, A. & Christensen, J.E., 2011. "Low-energy district heating in energy-efficient building areas," Energy, Elsevier, vol. 36(12), pages 6890-6899.
    3. Ferrari, Mario L. & Pascenti, Matteo & Sorce, Alessandro & Traverso, Alberto & Massardo, Aristide F., 2014. "Real-time tool for management of smart polygeneration grids including thermal energy storage," Applied Energy, Elsevier, vol. 130(C), pages 670-678.
    4. Al-attab, K.A. & Zainal, Z.A., 2015. "Externally fired gas turbine technology: A review," Applied Energy, Elsevier, vol. 138(C), pages 474-487.
    5. Bruno, Joan Carles & Ortega-López, Víctor & Coronas, Alberto, 2009. "Integration of absorption cooling systems into micro gas turbine trigeneration systems using biogas: Case study of a sewage treatment plant," Applied Energy, Elsevier, vol. 86(6), pages 837-847, June.
    6. Ferrari, Mario L. & Pascenti, Matteo & Traverso, Alberto N. & Massardo, Aristide F., 2012. "Hybrid system test rig: Chemical composition emulation with steam injection," Applied Energy, Elsevier, vol. 97(C), pages 809-815.
    7. Bakalis, Diamantis P. & Stamatis, Anastassios G., 2013. "Incorporating available micro gas turbines and fuel cell: Matching considerations and performance evaluation," Applied Energy, Elsevier, vol. 103(C), pages 607-617.
    8. Jayawardena, A.V. & Meegahapola, L.G. & Robinson, D.A. & Perera, S., 2015. "Microgrid capability diagram: A tool for optimal grid-tied operation," Renewable Energy, Elsevier, vol. 74(C), pages 497-504.
    9. Caresana, F. & Pelagalli, L. & Comodi, G. & Renzi, M., 2014. "Microturbogas cogeneration systems for distributed generation: Effects of ambient temperature on global performance and components’ behavior," Applied Energy, Elsevier, vol. 124(C), pages 17-27.
    10. Ferrari, Mario L., 2015. "Advanced control approach for hybrid systems based on solid oxide fuel cells," Applied Energy, Elsevier, vol. 145(C), pages 364-373.
    11. Bazmi, Aqeel Ahmed & Zahedi, Gholamreza, 2011. "Sustainable energy systems: Role of optimization modeling techniques in power generation and supply—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3480-3500.
    12. Lira-Barragán, Luis Fernando & Ponce-Ortega, José María & Serna-González, Medardo & El-Halwagi, Mahmoud M., 2014. "Optimal design of process energy systems integrating sustainable considerations," Energy, Elsevier, vol. 76(C), pages 139-160.
    13. Zhang, Jianyun & Liu, Pei & Zhou, Zhe & Ma, Linwei & Li, Zheng & Ni, Weidou, 2014. "A mixed-integer nonlinear programming approach to the optimal design of heat network in a polygeneration energy system," Applied Energy, Elsevier, vol. 114(C), pages 146-154.
    14. Salomón, Marianne & Savola, Tuula & Martin, Andrew & Fogelholm, Carl-Johan & Fransson, Torsten, 2011. "Small-scale biomass CHP plants in Sweden and Finland," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(9), pages 4451-4465.
    15. Fragaki, Aikaterini & Andersen, Anders N. & Toke, David, 2008. "Exploration of economical sizing of gas engine and thermal store for combined heat and power plants in the UK," Energy, Elsevier, vol. 33(11), pages 1659-1670.
    16. Ferrari, Mario L. & Massardo, Aristide F., 2013. "Cathode–anode side interaction in SOFC hybrid systems," Applied Energy, Elsevier, vol. 105(C), pages 369-379.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ferrari, Mario L. & Silvestri, Paolo & Reggio, Federico & Massardo, Aristide F., 2018. "Surge prevention for gas turbines connected with large volume size: Experimental demonstration with a microturbine," Applied Energy, Elsevier, vol. 230(C), pages 1057-1064.
    2. Ferrari, M.L. & Cuneo, A. & Pascenti, M. & Traverso, A., 2017. "Real-time state of charge estimation in thermal storage vessels applied to a smart polygeneration grid," Applied Energy, Elsevier, vol. 206(C), pages 90-100.
    3. di Gaeta, Alessandro & Reale, Fabrizio & Chiariello, Fabio & Massoli, Patrizio, 2017. "A dynamic model of a 100 kW micro gas turbine fuelled with natural gas and hydrogen blends and its application in a hybrid energy grid," Energy, Elsevier, vol. 129(C), pages 299-320.
    4. Ferrari, M.L. & Pascenti, M. & Massardo, A.F., 2018. "Validated ejector model for hybrid system applications," Energy, Elsevier, vol. 162(C), pages 1106-1114.
    5. Rivarolo, M. & Freda, A. & Traverso, A., 2020. "Test campaign and application of a small-scale ducted wind turbine with analysis of yaw angle influence," Applied Energy, Elsevier, vol. 279(C).
    6. Palomba, Valeria & Ferraro, Marco & Frazzica, Andrea & Vasta, Salvatore & Sergi, Francesco & Antonucci, Vincenzo, 2018. "Experimental and numerical analysis of a SOFC-CHP system with adsorption and hybrid chillers for telecommunication applications," Applied Energy, Elsevier, vol. 216(C), pages 620-633.
    7. Tataraki, Kalliopi G. & Kavvadias, Konstantinos C. & Maroulis, Zacharias B., 2018. "A systematic approach to evaluate the economic viability of Combined Cooling Heating and Power systems over conventional technologies," Energy, Elsevier, vol. 148(C), pages 283-295.
    8. Alelyani, Sami M. & Sherbeck, Jonathan A. & Fette, Nicholas W. & Wang, Yuqian & Phelan, Patrick E., 2018. "Assessment of a novel heat-driven cycle to produce shaft power and refrigeration," Applied Energy, Elsevier, vol. 215(C), pages 751-764.
    9. Mahmood, Mariam & Traverso, Alberto & Traverso, Alberto Nicola & Massardo, Aristide F. & Marsano, Davide & Cravero, Carlo, 2018. "Thermal energy storage for CSP hybrid gas turbine systems: Dynamic modelling and experimental validation," Applied Energy, Elsevier, vol. 212(C), pages 1240-1251.
    10. Gopisetty, Satya & Treffinger, Peter & Reindl, Leonhard Michael, 2017. "Open-source energy planning tool with easy-to-parameterize components for the conception of polygeneration systems," Energy, Elsevier, vol. 126(C), pages 756-765.
    11. Jana, Kuntal & Ray, Avishek & Majoumerd, Mohammad Mansouri & Assadi, Mohsen & De, Sudipta, 2017. "Polygeneration as a future sustainable energy solution – A comprehensive review," Applied Energy, Elsevier, vol. 202(C), pages 88-111.
    12. Cuneo, A. & Zaccaria, V. & Tucker, D. & Sorce, A., 2018. "Gas turbine size optimization in a hybrid system considering SOFC degradation," Applied Energy, Elsevier, vol. 230(C), pages 855-864.
    13. Xu, Zhen & Lu, Yuan & Wang, Bo & Zhao, Lifeng & Chen, Changnian & Xiao, Yunhan, 2019. "Experimental evaluation of 100 kW grade micro humid air turbine cycles converted from a microturbine," Energy, Elsevier, vol. 175(C), pages 687-693.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zaccaria, V. & Tucker, D. & Traverso, A., 2016. "Transfer function development for SOFC/GT hybrid systems control using cold air bypass," Applied Energy, Elsevier, vol. 165(C), pages 695-706.
    2. Ferrari, M.L. & Cuneo, A. & Pascenti, M. & Traverso, A., 2017. "Real-time state of charge estimation in thermal storage vessels applied to a smart polygeneration grid," Applied Energy, Elsevier, vol. 206(C), pages 90-100.
    3. Konečná, Eva & Teng, Sin Yong & Máša, Vítězslav, 2020. "New insights into the potential of the gas microturbine in microgrids and industrial applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    4. Baudoin, Sylvain & Vechiu, Ionel & Camblong, Haritza & Vinassa, Jean-Michel & Barelli, Linda, 2016. "Sizing and control of a Solid Oxide Fuel Cell/Gas microTurbine hybrid power system using a unique inverter for rural microgrid integration," Applied Energy, Elsevier, vol. 176(C), pages 272-281.
    5. Ferrari, Mario L., 2015. "Advanced control approach for hybrid systems based on solid oxide fuel cells," Applied Energy, Elsevier, vol. 145(C), pages 364-373.
    6. Dehghan, Ali Reza & Fanaei, Mohammad Ali & Panahi, Mehdi, 2022. "Economic plantwide control of a hybrid solid oxide fuel cell - gas turbine system," Applied Energy, Elsevier, vol. 328(C).
    7. Sorce, A. & Greco, A. & Magistri, L. & Costamagna, P., 2014. "FDI oriented modeling of an experimental SOFC system, model validation and simulation of faulty states," Applied Energy, Elsevier, vol. 136(C), pages 894-908.
    8. Damo, U.M. & Ferrari, M.L. & Turan, A. & Massardo, A.F., 2019. "Solid oxide fuel cell hybrid system: A detailed review of an environmentally clean and efficient source of energy," Energy, Elsevier, vol. 168(C), pages 235-246.
    9. Alaia Sola & Cristina Corchero & Jaume Salom & Manel Sanmarti, 2018. "Simulation Tools to Build Urban-Scale Energy Models: A Review," Energies, MDPI, vol. 11(12), pages 1-24, November.
    10. Komatsu, Y. & Brus, G. & Kimijima, S. & Szmyd, J.S., 2014. "The effect of overpotentials on the transient response of the 300W SOFC cell stack voltage," Applied Energy, Elsevier, vol. 115(C), pages 352-359.
    11. Barelli, L. & Bidini, G. & Ottaviano, A., 2017. "Integration of SOFC/GT hybrid systems in Micro-Grids," Energy, Elsevier, vol. 118(C), pages 716-728.
    12. Singh, Omendra Kumar, 2016. "Performance enhancement of combined cycle power plant using inlet air cooling by exhaust heat operated ammonia-water absorption refrigeration system," Applied Energy, Elsevier, vol. 180(C), pages 867-879.
    13. Rovense, Francesco & Sebastián, Andrés & Abbas, Rubén & Romero, Manuel & González-Aguilar, José, 2023. "Performance map analysis of a solar-driven and fully unfired closed-cycle micro gas turbine," Energy, Elsevier, vol. 263(PB).
    14. Chen, Hao & Geng, Hao-Peng & Ling, Hui-Ting & Peng, Song & Li, Nan & Yu, Shiwei & Wei, Yi-Ming, 2020. "Modeling the coal-to-gas switch potentials in the power sector: A case study of China," Energy, Elsevier, vol. 192(C).
    15. Nuytten, Thomas & Claessens, Bert & Paredis, Kristof & Van Bael, Johan & Six, Daan, 2013. "Flexibility of a combined heat and power system with thermal energy storage for district heating," Applied Energy, Elsevier, vol. 104(C), pages 583-591.
    16. Zaccaria, V. & Tucker, D. & Traverso, A., 2017. "Operating strategies to minimize degradation in fuel cell gas turbine hybrids," Applied Energy, Elsevier, vol. 192(C), pages 437-445.
    17. Ferrari, Mario L. & Pascenti, Matteo & Sorce, Alessandro & Traverso, Alberto & Massardo, Aristide F., 2014. "Real-time tool for management of smart polygeneration grids including thermal energy storage," Applied Energy, Elsevier, vol. 130(C), pages 670-678.
    18. Renzi, Massimiliano & Patuzzi, Francesco & Baratieri, Marco, 2017. "Syngas feed of micro gas turbines with steam injection: Effects on performance, combustion and pollutants formation," Applied Energy, Elsevier, vol. 206(C), pages 697-707.
    19. Ferrari, Mario L. & Silvestri, Paolo & Reggio, Federico & Massardo, Aristide F., 2018. "Surge prevention for gas turbines connected with large volume size: Experimental demonstration with a microturbine," Applied Energy, Elsevier, vol. 230(C), pages 1057-1064.
    20. Azizi, Mohammad Ali & Brouwer, Jacob, 2018. "Progress in solid oxide fuel cell-gas turbine hybrid power systems: System design and analysis, transient operation, controls and optimization," Applied Energy, Elsevier, vol. 215(C), pages 237-289.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:162:y:2016:i:c:p:622-630. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.