IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v11y2019i1p287-d195766.html
   My bibliography  Save this article

Evaluation of Building Energy and Daylight Performance of Electrochromic Glazing for Optimal Control in Three Different Climate Zones

Author

Listed:
  • Myunghwan Oh

    (Building Envelope Technology Center, Energy & Environment Business Division, Korea Conformity Laboratories (KCL), 595-10, Pyengsin 1-ro, Daesan-eup, Seosan-si 31900, Chungnam, Korea)

  • Minsu Jang

    (Building Envelope Technology Center, Energy & Environment Business Division, Korea Conformity Laboratories (KCL), 595-10, Pyengsin 1-ro, Daesan-eup, Seosan-si 31900, Chungnam, Korea)

  • Jaesik Moon

    (Building Envelope Technology Center, Energy & Environment Business Division, Korea Conformity Laboratories (KCL), 595-10, Pyengsin 1-ro, Daesan-eup, Seosan-si 31900, Chungnam, Korea)

  • Seungjun Roh

    (Sustainable Building Research Center, Hanyang University, 55 Hanyangdaehak-ro, Sangrok-gu, Ansan-si 15588, Gyeonggi-do, Korea)

Abstract

The objective of this paper is to analyze the control conditions of the transmittance rate, and determine the conditions that are most optimal with respect to building energy and daylight performance in three climate conditions: Riyadh, Saudi Arabia (hot climate); Inchon, South Korea (hot and cold climate); and Moscow, Russia (cold climate). The analysis was based on the electrochromic glass developed by a research team. Electrochromic glass is a next generation solar control glass that can control the transmittance of the glass itself. Therefore, proper control methods are essential for rational use of this electrochromic glass. To properly control electrochromic glass, daylight performance must be considered, along with building energy (heating, cooling, and lighting). If only building energy is considered, transmittance needs to be lowered during the summer season and increased during the winter season. Controlling electrochromic glass transmittance with such a method would not improve the satisfaction of users and occupants of a building due to the resulting glare. In addition to energy reduction, the basic function of solar control glass is to prevent glare. Therefore, in this study, we develop the Energy and Daylight Performance Index (EDPI) using, to evaluate the combined building energy and daylight performance and deduce the optimal control method for electrochromic glass. In addition, optimal control conditions for the three different climatic regions were obtained. Limitations of this study were that the scope was restricted to the eastern climate region, and that the building analysis model was limited to one climate region. It is expected that the optimal control method could be used as an initial database in the development of a electrochromic glass control system.

Suggested Citation

  • Myunghwan Oh & Minsu Jang & Jaesik Moon & Seungjun Roh, 2019. "Evaluation of Building Energy and Daylight Performance of Electrochromic Glazing for Optimal Control in Three Different Climate Zones," Sustainability, MDPI, vol. 11(1), pages 1-23, January.
    • Handle: RePEc:gam:jsusta:v:11:y:2019:i:1:p:287-:d:195766
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/11/1/287/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/11/1/287/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Tavares, P.F. & Gaspar, A.R. & Martins, A.G. & Frontini, F., 2014. "Evaluation of electrochromic windows impact in the energy performance of buildings in Mediterranean climates," Energy Policy, Elsevier, vol. 67(C), pages 68-81.
    2. Myunghwan Oh & Sungho Tae & Sangkun Hwang, 2018. "Analysis of Heating and Cooling Loads of Electrochromic Glazing in High-Rise Residential Buildings in South Korea," Sustainability, MDPI, vol. 10(4), pages 1-25, April.
    3. Myunghwan Oh & Jaesung Park & Seungjun Roh & Chulsung Lee, 2018. "Deducing the Optimal Control Method for Electrochromic Triple Glazing through an Integrated Evaluation of Building Energy and Daylight Performance," Energies, MDPI, vol. 11(9), pages 1-22, August.
    4. Ghosh, A. & Mallick, T.K., 2018. "Evaluation of colour properties due to switching behaviour of a PDLC glazing for adaptive building integration," Renewable Energy, Elsevier, vol. 120(C), pages 126-133.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yibing Xue & Wenhan Liu, 2022. "A Study on Parametric Design Method for Optimization of Daylight in Commercial Building’s Atrium in Cold Regions," Sustainability, MDPI, vol. 14(13), pages 1-22, June.
    2. Rakhyun Kim & Myung-Kwan Lim & Seungjun Roh & Won-Jun Park, 2021. "Analysis of the Characteristics of Environmental Impacts According to the Cut-Off Criteria Applicable to the Streamlined Life Cycle Assessment (S-LCA) of Apartment Buildings in South Korea," Sustainability, MDPI, vol. 13(5), pages 1-19, March.
    3. Ismail M. Budaiwi & Mohammed Abdul Fasi, 2023. "Assessing the Energy-Saving Potential and Visual Comfort of Electrochromic Smart Windows in Office Buildings: A Case Study in Dhahran, Saudi Arabia," Sustainability, MDPI, vol. 15(12), pages 1-18, June.
    4. Mesloub, Abdelhakim & Ghosh, Aritra & Touahmia, Mabrouk & Albaqawy, Ghazy Abdullah & Alsolami, Badr M. & Ahriz, Atef, 2022. "Assessment of the overall energy performance of an SPD smart window in a hot desert climate," Energy, Elsevier, vol. 252(C).
    5. Jae-Hyang Kim & Jongin Hong & Seung-Hoon Han, 2021. "Optimized Physical Properties of Electrochromic Smart Windows to Reduce Cooling and Heating Loads of Office Buildings," Sustainability, MDPI, vol. 13(4), pages 1-30, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chambers, Jonathan & Hollmuller, Pierre & Bouvard, Olivia & Schueler, Andreas & Scartezzini, Jean-Louis & Azar, Elie & Patel, Martin K., 2019. "Evaluating the electricity saving potential of electrochromic glazing for cooling and lighting at the scale of the Swiss non-residential national building stock using a Monte Carlo model," Energy, Elsevier, vol. 185(C), pages 136-147.
    2. Myunghwan Oh & Chulsung Lee & Jaesung Park & Kwangseok Lee & Sungho Tae, 2019. "Evaluation of Energy and Daylight Performance of Old Office Buildings in South Korea with Curtain Walls Remodeled Using Polymer Dispersed Liquid Crystal (PDLC) Films," Energies, MDPI, vol. 12(19), pages 1-26, September.
    3. Myunghwan Oh & Jaesung Park & Seungjun Roh & Chulsung Lee, 2018. "Deducing the Optimal Control Method for Electrochromic Triple Glazing through an Integrated Evaluation of Building Energy and Daylight Performance," Energies, MDPI, vol. 11(9), pages 1-22, August.
    4. Alessandro Cannavale & Ubaldo Ayr & Francesco Fiorito & Francesco Martellotta, 2020. "Smart Electrochromic Windows to Enhance Building Energy Efficiency and Visual Comfort," Energies, MDPI, vol. 13(6), pages 1-17, March.
    5. Myunghwan Oh & Sungho Tae & Sangkun Hwang, 2018. "Analysis of Heating and Cooling Loads of Electrochromic Glazing in High-Rise Residential Buildings in South Korea," Sustainability, MDPI, vol. 10(4), pages 1-25, April.
    6. Krarti, Moncef, 2022. "Design optimization of smart glazing optical properties for office spaces," Applied Energy, Elsevier, vol. 308(C).
    7. Sun, Yuying & Hao, Yingying & Wang, Dan & Wang, Wei & Deng, Shiming & Qi, Haoran & Xue, Peng, 2022. "A predictive control strategy for electrochromic glazing to balance the visual and thermal environmental requirements: Approach and energy-saving potential assessment," Renewable Energy, Elsevier, vol. 194(C), pages 334-348.
    8. Luigi Maffei & Antonio Ciervo & Achille Perrotta & Massimiliano Masullo & Antonio Rosato, 2023. "Innovative Energy-Efficient Prefabricated Movable Buildings for Smart/Co-Working: Performance Assessment upon Varying Building Configurations," Sustainability, MDPI, vol. 15(12), pages 1-37, June.
    9. Krarti, Moncef, 2023. "Optimal optical properties for smart glazed windows applied to residential buildings," Energy, Elsevier, vol. 278(PB).
    10. Alessandro Cannavale & Francesco Martellotta & Francesco Fiorito & Ubaldo Ayr, 2020. "The Challenge for Building Integration of Highly Transparent Photovoltaics and Photoelectrochromic Devices," Energies, MDPI, vol. 13(8), pages 1-24, April.
    11. Halawa, Edward & Ghaffarianhoseini, Amirhosein & Ghaffarianhoseini, Ali & Trombley, Jeremy & Hassan, Norhaslina & Baig, Mirza & Yusoff, Safiah Yusmah & Azzam Ismail, Muhammad, 2018. "A review on energy conscious designs of building façades in hot and humid climates: Lessons for (and from) Kuala Lumpur and Darwin," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2147-2161.
    12. Pu, Jihong & Shen, Chao & Yang, Shaoxin & Zhang, Chunxiao & Chwieduk, Dorota & Kalogirou, Soteris A., 2022. "Feasibility investigation on using silver nanorods in energy saving windows for light/heat decoupling," Energy, Elsevier, vol. 245(C).
    13. Mariana Fernandes & Vânia Freitas & Sónia Pereira & Rita Leones & Maria Manuela Silva & Luís D. Carlos & Elvira Fortunato & Rute A. S. Ferreira & Rosa Rego & Verónica De Zea Bermudez, 2018. "Luminescent Electrochromic Devices for Smart Windows of Energy-Efficient Buildings," Energies, MDPI, vol. 11(12), pages 1-13, December.
    14. Jiraphorn Mahawan & Atthakorn Thongtha, 2021. "Experimental Investigation of Illumination Performance of Hollow Light Pipe for Energy Consumption Reduction in Buildings," Energies, MDPI, vol. 14(2), pages 1-17, January.
    15. Favoino, Fabio & Fiorito, Francesco & Cannavale, Alessandro & Ranzi, Gianluca & Overend, Mauro, 2016. "Optimal control and performance of photovoltachromic switchable glazing for building integration in temperate climates," Applied Energy, Elsevier, vol. 178(C), pages 943-961.
    16. DeForest, Nicholas & Shehabi, Arman & Selkowitz, Stephen & Milliron, Delia J., 2017. "A comparative energy analysis of three electrochromic glazing technologies in commercial and residential buildings," Applied Energy, Elsevier, vol. 192(C), pages 95-109.
    17. Ke Chen & Weisheng Lu, 2018. "Design for Manufacture and Assembly Oriented Design Approach to a Curtain Wall System: A Case Study of a Commercial Building in Wuhan, China," Sustainability, MDPI, vol. 10(7), pages 1-16, June.
    18. Fabrizio M. Amoruso & Udo Dietrich & Thorsten Schuetze, 2019. "Integrated BIM-Parametric Workflow-Based Analysis of Daylight Improvement for Sustainable Renovation of an Exemplary Apartment in Seoul, Korea," Sustainability, MDPI, vol. 11(9), pages 1-29, May.
    19. Shafaghat, A. & Keyvanfar, A., 2022. "Dynamic façades design typologies, technologies, measurement techniques, and physical performances across thermal, optical, ventilation, and electricity generation outlooks," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    20. Ghosh, Aritra & Norton, Brian, 2019. "Optimization of PV powered SPD switchable glazing to minimise probability of loss of power supply," Renewable Energy, Elsevier, vol. 131(C), pages 993-1001.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:11:y:2019:i:1:p:287-:d:195766. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.