IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v11y2019i10p2725-d230812.html
   My bibliography  Save this article

Unintended Circularity?—Assessing a Product-Service System for its Potential Contribution to a Circular Economy

Author

Listed:
  • Johannes Matschewsky

    (Environmental Technology and Management, Department of Management and Engineering, Linköping University, 581 83 Linköping, Sweden)

Abstract

Product-service systems (PSSs) are seen as valuable facilitators of a circular economy (CE) on a business level. However, that PSSs contribute to a CE is not a given and is determined by the chosen PSS business model and strategy applied throughout the entire lifecycle. Thus, in order to support companies in implementing circular business models such as PSSs, an increasing number of frameworks and methods have been proposed in prior research. This article hypothesizes that many industrial companies are expanding to become PSS providers with neither such support nor a strong sustainability focus. There is a gap in the literature regarding the potential contribution of such PSSs to a CE. Thus, the research reported aims to provide initial insight regarding whether unintended circularity, i.e., an unintended contribution to a CE, may occur when becoming a PSS provider. Applying and adapting an existing framework for the assessment of PSSs’ potential contribution to a CE, the use-oriented PSS of an industrial company was assessed in-depth. Results regarding the relative resource reduction and the prospect of achieving absolute resource decoupling are reported and discussed. While relative improvements over product sales are identified, e.g., resulting from end-of-life efforts on reuse and remanufacturing, opportunities for additional enhancement are found, e.g., in adjustments of the PSS design process. Concerning absolute resource decoupling, a fundamental challenge lies in the use-oriented PSS’s dependency on an increasing number of physical components as the company’s business expands. This article advances the discussion on PSSs’ potential contributions to a CE with an in-depth empirical study. For practitioners, the results reported expand on important aspects of efficient and effective PSS provision throughout the lifecycle.

Suggested Citation

  • Johannes Matschewsky, 2019. "Unintended Circularity?—Assessing a Product-Service System for its Potential Contribution to a Circular Economy," Sustainability, MDPI, vol. 11(10), pages 1-27, May.
  • Handle: RePEc:gam:jsusta:v:11:y:2019:i:10:p:2725-:d:230812
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/11/10/2725/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/11/10/2725/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Vasileios Rizos & Arno Behrens & Wytze Van der Gaast & Erwin Hofman & Anastasia Ioannou & Terri Kafyeke & Alexandros Flamos & Roberto Rinaldi & Sotiris Papadelis & Martin Hirschnitz-Garbers & Corrado , 2016. "Implementation of Circular Economy Business Models by Small and Medium-Sized Enterprises (SMEs): Barriers and Enablers," Sustainability, MDPI, vol. 8(11), pages 1-18, November.
    2. Julia L. K. Nußholz, 2017. "Circular Business Models: Defining a Concept and Framing an Emerging Research Field," Sustainability, MDPI, vol. 9(10), pages 1-16, October.
    3. Vandermerwe, Sandra & Rada, Juan, 1988. "Servitization of business: Adding value by adding services," European Management Journal, Elsevier, vol. 6(4), pages 314-324, December.
    4. Nancy M. P. Bocken & Elsa A. Olivetti & Jonathan M. Cullen & José Potting & Reid Lifset, 2017. "Taking the Circularity to the Next Level: A Special Issue on the Circular Economy," Journal of Industrial Ecology, Yale University, vol. 21(3), pages 476-482, June.
    5. Lenka, Sambit & Parida, Vinit & Sjödin, David Rönnberg & Wincent, Joakim, 2018. "Exploring the microfoundations of servitization: How individual actions overcome organizational resistance," Journal of Business Research, Elsevier, vol. 88(C), pages 328-336.
    6. de Jesus, Ana & Mendonça, Sandro, 2018. "Lost in Transition? Drivers and Barriers in the Eco-innovation Road to the Circular Economy," Ecological Economics, Elsevier, vol. 145(C), pages 75-89.
    7. Joan Manuel F. Mendoza & Maria Sharmina & Alejandro Gallego-Schmid & Graeme Heyes & Adisa Azapagic, 2017. "Integrating Backcasting and Eco-Design for the Circular Economy: The BECE Framework," Journal of Industrial Ecology, Yale University, vol. 21(3), pages 526-544, June.
    8. Alan Murray & Keith Skene & Kathryn Haynes, 2017. "The Circular Economy: An Interdisciplinary Exploration of the Concept and Application in a Global Context," Journal of Business Ethics, Springer, vol. 140(3), pages 369-380, February.
    9. Parida, Vinit & Burström, Thommie & Visnjic, Ivanka & Wincent, Joakim, 2019. "Orchestrating industrial ecosystem in circular economy: A two-stage transformation model for large manufacturing companies," Journal of Business Research, Elsevier, vol. 101(C), pages 715-725.
    10. Monia Niero & Michael Z. Hauschild & Simon B. Hoffmeyer & Stig I. Olsen, 2017. "Combining Eco-Efficiency and Eco-Effectiveness for Continuous Loop Beverage Packaging Systems: Lessons from the Carlsberg Circular Community," Journal of Industrial Ecology, Yale University, vol. 21(3), pages 742-753, June.
    11. Aris Pagoropoulos & Louise Laumann Kjaer & Yan Dong & Morten Birkved & Tim C. McAloone, 2018. "Economic and Environmental Impact Trade‐Offs Related to In‐Water Hull Cleanings of Merchant Vessels," Journal of Industrial Ecology, Yale University, vol. 22(4), pages 916-929, August.
    12. Trevor Zink & Roland Geyer, 2017. "Circular Economy Rebound," Journal of Industrial Ecology, Yale University, vol. 21(3), pages 593-602, June.
    13. Firnkorn, Jörg & Müller, Martin, 2011. "What will be the environmental effects of new free-floating car-sharing systems? The case of car2go in Ulm," Ecological Economics, Elsevier, vol. 70(8), pages 1519-1528, June.
    14. Vinit Parida & Joakim Wincent, 2019. "Why and how to compete through sustainability: a review and outline of trends influencing firm and network-level transformation," International Entrepreneurship and Management Journal, Springer, vol. 15(1), pages 1-19, March.
    15. Marcel C. Hollander & Conny A. Bakker & Erik Jan Hultink, 2017. "Product Design in a Circular Economy: Development of a Typology of Key Concepts and Terms," Journal of Industrial Ecology, Yale University, vol. 21(3), pages 517-525, June.
    16. Tom Lahti & Joakim Wincent & Vinit Parida, 2018. "A Definition and Theoretical Review of the Circular Economy, Value Creation, and Sustainable Business Models: Where Are We Now and Where Should Research Move in the Future?," Sustainability, MDPI, vol. 10(8), pages 1-19, August.
    17. Mateusz Lewandowski, 2016. "Designing the Business Models for Circular Economy—Towards the Conceptual Framework," Sustainability, MDPI, vol. 8(1), pages 1-28, January.
    18. Grubic, Tonci & Jennions, Ian, 2018. "Do outcome-based contracts exist? The investigation of power-by-the-hour and similar result-oriented cases," International Journal of Production Economics, Elsevier, vol. 206(C), pages 209-219.
    19. Louise Laumann Kjaer & Daniela C. A. Pigosso & Monia Niero & Nynne Marie Bech & Tim C. McAloone, 2019. "Product/Service‐Systems for a Circular Economy: The Route to Decoupling Economic Growth from Resource Consumption?," Journal of Industrial Ecology, Yale University, vol. 23(1), pages 22-35, February.
    20. Arnold Tukker, 2004. "Eight types of product–service system: eight ways to sustainability? Experiences from SusProNet," Business Strategy and the Environment, Wiley Blackwell, vol. 13(4), pages 246-260, July.
    21. Johannes Matschewsky & Marianna Lena Kambanou & Tomohiko Sakao, 2018. "Designing and providing integrated product-service systems – challenges, opportunities and solutions resulting from prescriptive approaches in two industrial companies," International Journal of Production Research, Taylor & Francis Journals, vol. 56(6), pages 2150-2168, March.
    22. Mariale Moreno & Carolina De los Rios & Zoe Rowe & Fiona Charnley, 2016. "A Conceptual Framework for Circular Design," Sustainability, MDPI, vol. 8(9), pages 1-15, September.
    23. Binswanger, Mathias, 2001. "Technological progress and sustainable development: what about the rebound effect?," Ecological Economics, Elsevier, vol. 36(1), pages 119-132, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yohannes A. Alamerew & Marianna Lena Kambanou & Tomohiko Sakao & Daniel Brissaud, 2020. "A Multi-Criteria Evaluation Method of Product-Level Circularity Strategies," Sustainability, MDPI, vol. 12(12), pages 1-20, June.
    2. Hinrika Droege & Andrea Raggi & Tomás B. Ramos, 2021. "Overcoming Current Challenges for Circular Economy Assessment Implementation in Public Sector Organisations," Sustainability, MDPI, vol. 13(3), pages 1-22, January.
    3. Kühl, Carl & Bourlakis, Michael & Aktas, Emel & Skipworth, Heather, 2022. "Product-service systems and circular supply chain practices in UK SMEs: The moderating effect of internal environmental orientation," Journal of Business Research, Elsevier, vol. 146(C), pages 155-165.
    4. Zhen Liu & Jing Liu & Mohamed Osmani, 2021. "Integration of Digital Economy and Circular Economy: Current Status and Future Directions," Sustainability, MDPI, vol. 13(13), pages 1-27, June.
    5. Erik Roos Lindgreen & Roberta Salomone & Tatiana Reyes, 2020. "A Critical Review of Academic Approaches, Methods and Tools to Assess Circular Economy at the Micro Level," Sustainability, MDPI, vol. 12(12), pages 1-27, June.
    6. Lena Ries & Markus Beckmann & Peter Wehnert, 2023. "Sustainable smart product-service systems: a causal logic framework for impact design," Journal of Business Economics, Springer, vol. 93(4), pages 667-706, May.
    7. Fabio Neves Puglieri & Rodrigo Salvador & Omar Romero‐Hernandez & Edmundo Escrivão Filho & Cassiano Moro Piekarski & Antonio Carlos de Francisco & Aldo Roberto Ometto, 2022. "Strategic planning oriented to circular business models: A decision framework to promote sustainable development," Business Strategy and the Environment, Wiley Blackwell, vol. 31(7), pages 3254-3273, November.
    8. Juan Pablo Vargas & Angélica Patricia Muñoz Lagos & José Guillermo Feriz Torres & Ian Scott Kinney & Sebastián Pérez Cortés & Juan Pablo Hurtado, 2022. "Achieving Circularity through Novel Product-Service Systems in the Mining Industry: An Opportunity for Circularity," Sustainability, MDPI, vol. 14(6), pages 1-15, March.
    9. Justyna Kozlowska, 2020. "What Influences the Servitization Process the Most? A Perspective of Polish Machinery Manufacturers," Sustainability, MDPI, vol. 12(12), pages 1-24, June.
    10. Tomohiko Sakao, 2019. "Research Series Review for Transdisciplinarity Assessment—Validation with Sustainable Consumption and Production Research," Sustainability, MDPI, vol. 11(19), pages 1-22, September.
    11. Teodora Stillitano & Emanuele Spada & Nathalie Iofrida & Giacomo Falcone & Anna Irene De Luca, 2021. "Sustainable Agri-Food Processes and Circular Economy Pathways in a Life Cycle Perspective: State of the Art of Applicative Research," Sustainability, MDPI, vol. 13(5), pages 1-28, February.
    12. Päivi Petänen & Henna Sundqvist & Maria Antikainen, 2024. "Deconstructing Customer Value Propositions for the Circular Product-as-a-Service Business Model: A Case Study from the Textile Industry," Circular Economy and Sustainability, Springer, vol. 4(3), pages 1631-1653, September.
    13. Nicolas Haber & Mario Fargnoli, 2021. "Sustainable Product-Service Systems Customization: A Case Study Research in the Medical Equipment Sector," Sustainability, MDPI, vol. 13(12), pages 1-20, June.
    14. Ricardo J Hernandez, 2019. "Sustainable Product-Service Systems and Circular Economies," Sustainability, MDPI, vol. 11(19), pages 1-11, September.
    15. Valerio Elia & Maria Grazia Gnoni & Fabiana Tornese, 2019. "Exploring the Benefits of Productization in the Utilities Sector," Sustainability, MDPI, vol. 11(20), pages 1-11, October.
    16. Hinrika Droege & Andrea Raggi & Tomás B. Ramos, 2021. "Co‐development of a framework for circular economy assessment in organisations: Learnings from the public sector," Corporate Social Responsibility and Environmental Management, John Wiley & Sons, vol. 28(6), pages 1715-1729, November.
    17. Lahcen, Bart & Eyckmans, Johan & Rousseau, Sandra & Dams, Yoko & Brusselaers, Jan, 2022. "Modelling the circular economy: Introducing a supply chain equilibrium approach," Ecological Economics, Elsevier, vol. 197(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Marcos Ferasso & Tatiana Beliaeva & Sascha Kraus & Thomas Clauss & Domingo Ribeiro‐Soriano, 2020. "Circular economy business models: The state of research and avenues ahead," Business Strategy and the Environment, Wiley Blackwell, vol. 29(8), pages 3006-3024, December.
    2. Nancy Bocken & Lars Strupeit & Katherine Whalen & Julia Nußholz, 2019. "A Review and Evaluation of Circular Business Model Innovation Tools," Sustainability, MDPI, vol. 11(8), pages 1-25, April.
    3. Armaghan Chizaryfard & Paolo Trucco & Cali Nuur, 2021. "The transformation to a circular economy: framing an evolutionary view," Journal of Evolutionary Economics, Springer, vol. 31(2), pages 475-504, April.
    4. Mohamad Kaddoura & Marianna Lena Kambanou & Anne-Marie Tillman & Tomohiko Sakao, 2019. "Is Prolonging the Lifetime of Passive Durable Products a Low-Hanging Fruit of a Circular Economy? A Multiple Case Study," Sustainability, MDPI, vol. 11(18), pages 1-22, September.
    5. Gilbert Silvius & Aydan Ismayilova & Vicente Sales-Vivó & Micol Costi, 2021. "Exploring Barriers for Circularity in the EU Furniture Industry," Sustainability, MDPI, vol. 13(19), pages 1-25, October.
    6. Vinit Parida & Joakim Wincent, 2019. "Why and how to compete through sustainability: a review and outline of trends influencing firm and network-level transformation," International Entrepreneurship and Management Journal, Springer, vol. 15(1), pages 1-19, March.
    7. Marina P. P. Pieroni & Tim C. McAloone & Daniela C. A. Pigosso, 2019. "Configuring New Business Models for Circular Economy through Product–Service Systems," Sustainability, MDPI, vol. 11(13), pages 1-22, July.
    8. Friedrich A. Halstenberg & Kai Lindow & Rainer Stark, 2019. "Leveraging Circular Economy through a Methodology for Smart Service Systems Engineering," Sustainability, MDPI, vol. 11(13), pages 1-36, June.
    9. Piera Centobelli & Roberto Cerchione & Davide Chiaroni & Pasquale Del Vecchio & Andrea Urbinati, 2020. "Designing business models in circular economy: A systematic literature review and research agenda," Business Strategy and the Environment, Wiley Blackwell, vol. 29(4), pages 1734-1749, May.
    10. Pejvak Oghazi & Rana Mostaghel, 2018. "Circular Business Model Challenges and Lessons Learned—An Industrial Perspective," Sustainability, MDPI, vol. 10(3), pages 1-19, March.
    11. Donato Masi & Steven Day & Janet Godsell, 2017. "Supply Chain Configurations in the Circular Economy: A Systematic Literature Review," Sustainability, MDPI, vol. 9(9), pages 1-22, September.
    12. Lahcen, Bart & Eyckmans, Johan & Rousseau, Sandra & Dams, Yoko & Brusselaers, Jan, 2022. "Modelling the circular economy: Introducing a supply chain equilibrium approach," Ecological Economics, Elsevier, vol. 197(C).
    13. Daniel Guzzo & Adriana Hofmann Trevisan & Marcia Echeveste & Janaina Mascarenhas Hornos Costa, 2019. "Circular Innovation Framework: Verifying Conceptual to Practical Decisions in Sustainability-Oriented Product-Service System Cases," Sustainability, MDPI, vol. 11(12), pages 1-29, June.
    14. Jan Konietzko & Nancy Bocken & Erik Jan Hultink, 2020. "A Tool to Analyze, Ideate and Develop Circular Innovation Ecosystems," Sustainability, MDPI, vol. 12(1), pages 1-39, January.
    15. Julian Lauten-Weiss & Stephan Ramesohl, 2021. "The Circular Business Framework for Building, Developing and Steering Businesses in the Circular Economy," Sustainability, MDPI, vol. 13(2), pages 1-14, January.
    16. Claudia Aparecida De Mattos & Thiago Lourenço Meira De Albuquerque, 2018. "Enabling Factors and Strategies for the Transition Toward a Circular Economy (CE)," Sustainability, MDPI, vol. 10(12), pages 1-18, December.
    17. Maria Rosa De Giacomo & Raimund Bleischwitz, 2020. "Business models for environmental sustainability: Contemporary shortcomings and some perspectives," Business Strategy and the Environment, Wiley Blackwell, vol. 29(8), pages 3352-3369, December.
    18. Jeff Mangers & Meysam Minoufekr & Peter Plapper & Sri Kolla, 2021. "An Innovative Strategy Allowing a Holistic System Change towards Circular Economy within Supply-Chains," Energies, MDPI, vol. 14(14), pages 1-17, July.
    19. Antonella Zucchella & Pietro Previtali & Roger Strange, 2022. "Proactive and reactive views in the transition towards circular business models. A grounded study in the plastic packaging industry," International Entrepreneurship and Management Journal, Springer, vol. 18(3), pages 1073-1102, September.
    20. David Hidalgo-Carvajal & Ruth Carrasco-Gallego & Gustavo Morales-Alonso, 2021. "From Goods to Services and from Linear to Circular: The Role of Servitization’s Challenges and Drivers in the Shifting Process," Sustainability, MDPI, vol. 13(8), pages 1-26, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:11:y:2019:i:10:p:2725-:d:230812. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.