IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i8p2799-d791377.html
   My bibliography  Save this article

Thermal Stress Simulation and Structure Failure Analyses of Nitrogen–Oxygen Sensors under a Gradual Temperature Field

Author

Listed:
  • Jiangtao Feng

    (School of Materials Science and Engineering, Huazhong University of Science & Technology, Wuhan 430074, China)

  • Jiaqi Geng

    (School of Materials Science and Engineering, Huazhong University of Science & Technology, Wuhan 430074, China)

  • Hangyu She

    (School of Naval Architecture & Ocean Engineering, Huazhong University of Science & Technology, Wuhan 430074, China)

  • Tao Zhang

    (School of Naval Architecture & Ocean Engineering, Huazhong University of Science & Technology, Wuhan 430074, China)

  • Bo Chi

    (School of Materials Science and Engineering, Huazhong University of Science & Technology, Wuhan 430074, China)

  • Jian Pu

    (School of Materials Science and Engineering, Huazhong University of Science & Technology, Wuhan 430074, China)

Abstract

Nitrogen–oxygen sensors are pivotal for NO X emission detection, and they have been designed as key components in vehicles’ exhaust systems. However, severe thermal stress concentrations during thermal cycling in the sensors create knotty structural damage issues, which are inevitable during the frequent start–stop events of the vehicles. Herein, to illustrate the effect of thermal concentration on a sensor’s structure, we simulated the temperature and stress field of a sensor through finite element analysis. The failure modes of the sensor based on the multilayer structure model were analyzed. Our simulation indicated that the thermal deformation and stress of the sensors increased significantly when the heating temperature in the sensors increased from 200 to 800 °C. High stress regions were located at the joint between the layers and the right angle of the air chamber. These results are consistent with the sensor failure locations that were observed by SEM, and the sensor’s failures mainly manifested in the form of cracks and delamination. The results suggest that both the multilayer interfaces and the shape of the air chamber could be optimized to reduce the thermal stress concentrations of the sensors. It is beneficial to improve the reliability of the sensor under thermal cycling operation.

Suggested Citation

  • Jiangtao Feng & Jiaqi Geng & Hangyu She & Tao Zhang & Bo Chi & Jian Pu, 2022. "Thermal Stress Simulation and Structure Failure Analyses of Nitrogen–Oxygen Sensors under a Gradual Temperature Field," Energies, MDPI, vol. 15(8), pages 1-11, April.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:8:p:2799-:d:791377
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/8/2799/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/8/2799/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Xiurong Fang & Jiang Zhu & Zijing Lin, 2018. "Effects of Electrode Composition and Thickness on the Mechanical Performance of a Solid Oxide Fuel Cell," Energies, MDPI, vol. 11(7), pages 1-13, July.
    2. Deng, Banglin & Li, Qing & Chen, Yangyang & Li, Meng & Liu, Aodong & Ran, Jiaqi & Xu, Ying & Liu, Xiaoqiang & Fu, Jianqin & Feng, Renhua, 2019. "The effect of air/fuel ratio on the CO and NOx emissions for a twin-spark motorcycle gasoline engine under wide range of operating conditions," Energy, Elsevier, vol. 169(C), pages 1202-1213.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zarabi Golkhatmi, Sanaz & Asghar, Muhammad Imran & Lund, Peter D., 2022. "A review on solid oxide fuel cell durability: Latest progress, mechanisms, and study tools," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    2. Duan, Xiongbo & Feng, Lining & Liu, Haibo & Jiang, Pengfei & Chen, Chao & Sun, Zhiqiang, 2023. "Experimental investigation on exhaust emissions of a heavy-duty vehicle powered by a methanol-fuelled spark ignition engine under world Harmonized Transient Cycle and actual on-road driving conditions," Energy, Elsevier, vol. 282(C).
    3. Catapano, Francesco & Di Iorio, Silvana & Magno, Agnese & Vaglieco, Bianca Maria, 2022. "Effect of fuel quality on combustion evolution and particle emissions from PFI and GDI engines fueled with gasoline, ethanol and blend, with focus on 10–23 nm particles," Energy, Elsevier, vol. 239(PB).
    4. Chiet Choo, Edwin Jia & Cheng, Xinwei & Scribano, Gianfranco & Ng, Hoon Kiat & Gan, Suyin, 2023. "Numerical investigation on the temporal and quasi-steady state soot characteristics of n-dodecane-n-butanol spray combustion," Energy, Elsevier, vol. 268(C).
    5. Tamilvanan, A. & Mohanraj, T. & Ashok, B. & Santhoshkumar, A., 2023. "Enhancement of energy conversion and emission reduction of Calophyllum inophyllum biodiesel in diesel engine using reactivity controlled compression ignition strategy and TOPSIS optimization," Energy, Elsevier, vol. 264(C).
    6. Zhang, Zhongbo & Wan, Weijian & Zhang, Wencan & Liu, Qin & Zhao, Rongchao & Chen, Youpeng & Qin, Qichao, 2022. "Research of the impacts of in-cylinder steam injection and ignition timing on the performance and NO emission of a LPG engine," Energy, Elsevier, vol. 244(PB).
    7. Nguyen, Dinh Duc & Moghaddam, Hesam & Pirouzfar, Vahid & Fayyazbakhsh, Ahmad & Su, Chia-Hung, 2021. "Improving the gasoline properties by blending butanol-Al2O3 to optimize the engine performance and reduce air pollution," Energy, Elsevier, vol. 218(C).
    8. Zheng Li & Guogang Yang & Qiuwan Shen & Shian Li & Hao Wang & Jiadong Liao & Ziheng Jiang & Guoling Zhang, 2022. "Transient Multi-Physics Modeling and Performance Degradation Evaluation of Direct Internal Reforming Solid Oxide Fuel Cell Focusing on Carbon Deposition Effect," Energies, MDPI, vol. 16(1), pages 1-20, December.
    9. Fu, Jianqin & Deng, Banglin & Liu, Xiaoqiang & Shu, Jun & Xu, Ying & Liu, Jingping, 2020. "The experimental study on transient emissions and engine behaviors of a sporting motorcycle under World Motorcycle Test Cycle," Energy, Elsevier, vol. 211(C).
    10. Tian, Lu & Lin, Kunsen & Zhao, Youcai & Zhao, Chunlong & Huang, Qifei & Zhou, Tao, 2022. "Combustion performance of fine screenings from municipal solid waste: Thermo-kinetic investigation and deep learning modeling via TG-FTIR," Energy, Elsevier, vol. 243(C).
    11. Deng, Banglin & Cai, Wenyu & Zhang, Wanxin & Bian, Li & Che, Xiangqian & Xiang, Yihua & Wu, Di, 2025. "A comprehensive investigation of EGR (exhaust gas recirculation) effects on energy distribution and emissions of a turbo-charging diesel engine under World Harmonized transient cycle," Energy, Elsevier, vol. 316(C).
    12. Jin, Xinfang & Ku, Anthony & Ohara, Brandon & Huang, Kevin & Singh, Surinder, 2021. "Performance analysis of a 550MWe solid oxide fuel cell and air turbine hybrid system powered by coal-derived syngas," Energy, Elsevier, vol. 222(C).
    13. Qiao, Junhao & Liu, Jingping & Liang, Jichao & Jia, Dongdong & Wang, Rumin & Shen, Dazi & Duan, Xiongbo, 2023. "Experimental investigation the effects of Miller cycle coupled with asynchronous intake valves on cycle-to-cycle variations and performance of the SI engine," Energy, Elsevier, vol. 263(PD).
    14. Tomasz A. Prokop & Grzegorz Brus & Shinji Kimijima & Janusz S. Szmyd, 2020. "Thin Solid Film Electrolyte and Its Impact on Electrode Polarization in Solid Oxide Fuel Cells Studied by Three-Dimensional Microstructure-Scale Numerical Simulation," Energies, MDPI, vol. 13(19), pages 1-14, October.
    15. Feng, Renhua & Li, Guanghua & Sun, Zhengwei & Hu, Xiulin & Deng, Banglin & Fu, Jianqin, 2023. "Potential of emission reduction of a turbo-charged non-road diesel engine without aftertreatment under multiple operating scenarios," Energy, Elsevier, vol. 263(PB).
    16. Zheng, Hongxiang & Jiang, Wenchun & Luo, Yun & Song, Ming & Zhang, Xiucheng & Tu, Shan-Tung, 2025. "Coupled degradation mechanism of electrochemical and mechanical performance of solid oxide fuel cells under thermal cycling," Applied Energy, Elsevier, vol. 381(C).
    17. Xia, Yan & Li, Yangyang & Liao, Cheng & Liu, Jingping & Wang, Shuqian & Qiao, Junhao & Zhang, Shijia, 2021. "On the quantitative relationship of the in-cylinder heat to work conversion process of natural gas spark ignited engine under steady state and transient operation conditions," Energy, Elsevier, vol. 221(C).
    18. Wang, Bin & Xie, Fangxi & Hong, Wei & Du, Jiakun & Chen, Hong & Li, Xiaoping, 2023. "Extending ultra-lean burn performance of high compression ratio pre-chamber jet ignition engines based on injection strategy and optimized structure," Energy, Elsevier, vol. 282(C).
    19. Zhang, Yulin & Su, Yan & Li, Xiaoping & Xie, Fangxi & Yu, Hao & Shen, Bo & Lang, Maochun, 2025. "Study and prediction on macroscopic characteristics of free spray of typical alcohol fuels through experimentation and the artificial neural network," Energy, Elsevier, vol. 316(C).
    20. Siyu Lu & Man Zhang & Jie Wu & Wei Kong, 2022. "Performance Investigation on Mono-Block-Layer Build Type Solid Oxide Fuel Cells with a Vertical Rib Design," Energies, MDPI, vol. 15(3), pages 1-12, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:8:p:2799-:d:791377. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.