IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i18p6700-d913829.html
   My bibliography  Save this article

Electrical Generators for Large Wind Turbine: Trends and Challenges

Author

Listed:
  • Amina Bensalah

    (GREAH, Le Havre Normandie University, 76600 Le Havre, France)

  • Georges Barakat

    (GREAH, Le Havre Normandie University, 76600 Le Havre, France)

  • Yacine Amara

    (GREAH, Le Havre Normandie University, 76600 Le Havre, France)

Abstract

This paper presents an overview of the emerging trends in the development of electrical generators for large wind turbines. To describe the developments in the design of electrical generators, it is necessary to look at the conversion system as a whole, and then, the structural and mechanical performances of the drive train need to be considered. Many drive train configurations have been proposed for large wind turbines; they should ensure high reliability, long availability and reduced maintainability. Although most installed wind turbines are geared, directly driven wind turbines with permanent magnet generators have attracted growing interest in the last few years, which has been in parallel to the continuous increase of the per unit turbine power. The aim of this work is to present the recent commercial designs of electrical generators in large wind turbines. Both the strengths and weaknesses of the existing systems are discussed. The most emerging technologies in high-power, low-speed electrical generators are investigated. Furthermore, a comparative analysis of different electrical generator concepts is performed, and the generators are assessed upon a list of criteria such as the mass, cost, and mass-to-torque ratio. Within the framework of these criteria, it may help to determine whether the electrical generator is technically feasible and economically viable for high-power wind turbines. Finally, this review could help to determine suitable generators for use in large and ultra-large wind energy systems.

Suggested Citation

  • Amina Bensalah & Georges Barakat & Yacine Amara, 2022. "Electrical Generators for Large Wind Turbine: Trends and Challenges," Energies, MDPI, vol. 15(18), pages 1-36, September.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:18:p:6700-:d:913829
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/18/6700/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/18/6700/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Li, H. & Chen, Z., 2009. "Design optimization and site matching of direct-drive permanent magnet wind power generator systems," Renewable Energy, Elsevier, vol. 34(4), pages 1175-1184.
    2. Jiang, Zhiyu, 2021. "Installation of offshore wind turbines: A technical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    3. Abed, K.A. & El-Mallah, A.A., 1997. "Capacity factor of wind turbines," Energy, Elsevier, vol. 22(5), pages 487-491.
    4. Víctor Ballestín-Bernad & Jesús Sergio Artal-Sevil & José Antonio Domínguez-Navarro, 2021. "A Review of Transverse Flux Machines Topologies and Design," Energies, MDPI, vol. 14(21), pages 1-34, November.
    5. Estefania Artigao & Sofia Koukoura & Andrés Honrubia-Escribano & James Carroll & Alasdair McDonald & Emilio Gómez-Lázaro, 2018. "Current Signature and Vibration Analyses to Diagnose an In-Service Wind Turbine Drive Train," Energies, MDPI, vol. 11(4), pages 1-18, April.
    6. Grebenikov Viktor & Oleksandr Dobzhanskyi & Gamaliia Rostislav & Rupert Gouws, 2021. "Improvement of Transverse-Flux Machine Characteristics by Finding an Optimal Air-Gap Diameter and Coil Cross-Section at the Given Magneto-Motive Force of the PMs," Energies, MDPI, vol. 14(3), pages 1-14, February.
    7. Austin C. Hayes & Gregory L. Whiting, 2021. "Reducing the Structural Mass of Large Direct Drive Wind Turbine Generators through Triply Periodic Minimal Surfaces Enabled by Hybrid Additive Manufacturing," Clean Technol., MDPI, vol. 3(1), pages 1-16, March.
    8. Cristina Vázquez-Hernández & Javier Serrano-González & Gabriel Centeno, 2017. "A Market-Based Analysis on the Main Characteristics of Gearboxes Used in Onshore Wind Turbines," Energies, MDPI, vol. 10(11), pages 1-17, October.
    9. Petter Eklund & Sandra Eriksson, 2019. "The Influence of Permanent Magnet Material Properties on Generator Rotor Design," Energies, MDPI, vol. 12(7), pages 1-19, April.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Víctor Ballestín-Bernad & Jesús Sergio Artal-Sevil & José Antonio Domínguez-Navarro, 2023. "Prototype of a Two-Phase Axial-Gap Transverse Flux Generator Based on Reused Components and 3D Printing," Energies, MDPI, vol. 16(4), pages 1-20, February.
    2. Joon-Ha Hwang & Deok-je Bang & Gang-Won Jang, 2023. "Structural Analysis and Lightweight Optimization of a Buoyant Rotor-Type Permanent Magnet Generator for a Direct-Drive Wind Turbine," Energies, MDPI, vol. 16(15), pages 1-16, July.
    3. Sikandar Khan, 2023. "A Modeling Study Focused on Improving the Aerodynamic Performance of a Small Horizontal Axis Wind Turbine," Sustainability, MDPI, vol. 15(6), pages 1-15, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. K. Padmanathan & N. Kamalakannan & P. Sanjeevikumar & F. Blaabjerg & J. B. Holm-Nielsen & G. Uma & R. Arul & R. Rajesh & A. Srinivasan & J. Baskaran, 2019. "Conceptual Framework of Antecedents to Trends on Permanent Magnet Synchronous Generators for Wind Energy Conversion Systems," Energies, MDPI, vol. 12(13), pages 1-39, July.
    2. Giannini, Gianmaria & Rosa-Santos, Paulo & Ramos, Victor & Taveira-Pinto, Francisco, 2022. "Wave energy converters design combining hydrodynamic performance and structural assessment," Energy, Elsevier, vol. 249(C).
    3. de Medeiros, Armando Lúcio Ramos & Araújo, Alex Maurício & de Oliveira Filho, Oyama Douglas Queiroz & Rohatgi, Janardan & dos Santos, Maurílio José, 2015. "Analysis of design parameters of large-sized wind turbines by non-dimensional model," Energy, Elsevier, vol. 93(P1), pages 1146-1154.
    4. Reza Jafari & Pedram Asef & Mohammad Ardebili & Mohammad Mahdi Derakhshani, 2022. "Linear Permanent Magnet Vernier Generators for Wave Energy Applications: Analysis, Challenges, and Opportunities," Sustainability, MDPI, vol. 14(17), pages 1-35, September.
    5. Sandra Eriksson, 2019. "Permanent Magnet Synchronous Machines," Energies, MDPI, vol. 12(14), pages 1-5, July.
    6. de Vries, Bert J.M. & van Vuuren, Detlef P. & Hoogwijk, Monique M., 2007. "Renewable energy sources: Their global potential for the first-half of the 21st century at a global level: An integrated approach," Energy Policy, Elsevier, vol. 35(4), pages 2590-2610, April.
    7. Weigell, Jürgen & Jahn, Carlos, 2021. "Literature review of installation logistics for floating offshore wind turbines," Chapters from the Proceedings of the Hamburg International Conference of Logistics (HICL), in: Jahn, Carlos & Kersten, Wolfgang & Ringle, Christian M. (ed.), Adapting to the Future: Maritime and City Logistics in the Context of Digitalization and Sustainability. Proceedings of the Hamburg International Conf, volume 32, pages 599-622, Hamburg University of Technology (TUHH), Institute of Business Logistics and General Management.
    8. Petr Kacor & Petr Bernat & Petr Moldrik, 2021. "Utilization of Two Sensors in Offline Diagnosis of Squirrel-Cage Rotors of Asynchronous Motors," Energies, MDPI, vol. 14(20), pages 1-23, October.
    9. Carta, J.A. & Ramírez, P. & Velázquez, S., 2009. "A review of wind speed probability distributions used in wind energy analysis: Case studies in the Canary Islands," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(5), pages 933-955, June.
    10. Papi, F. & Bianchini, A., 2022. "Technical challenges in floating offshore wind turbine upscaling: A critical analysis based on the NREL 5 MW and IEA 15 MW Reference Turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 162(C).
    11. Albadi, M.H. & El-Saadany, E.F., 2010. "Optimum turbine-site matching," Energy, Elsevier, vol. 35(9), pages 3593-3602.
    12. Mehmet C. Kulan & Nick J. Baker & Simon Turvey, 2022. "Impact of Manufacturing and Material Uncertainties in Performance of a Transverse Flux Machine for Aerospace," Energies, MDPI, vol. 15(20), pages 1-21, October.
    13. Jiang, Zhiyu & Yang, Limin & Gao, Zhen & Moan, Torgeir, 2022. "Integrated dynamic analysis of a spar floating wind turbine with a hydraulic drivetrain," Renewable Energy, Elsevier, vol. 201(P1), pages 608-623.
    14. Jesús Antonio Enríquez Santiago & Orlando Lastres Danguillecourt & Guillermo Ibáñez Duharte & Jorge Evaristo Conde Díaz & Antonio Verde Añorve & Quetzalcoatl Hernandez Escobedo & Joel Pantoja Enríquez, 2021. "Dimensioning Optimization of the Permanent Magnet Synchronous Generator for Direct Drive Wind Turbines," Energies, MDPI, vol. 14(21), pages 1-13, November.
    15. Mohd Zin, Abdullah Asuhaimi B. & Pesaran H.A., Mahmoud & Khairuddin, Azhar B. & Jahanshaloo, Leila & Shariati, Omid, 2013. "An overview on doubly fed induction generators′ controls and contributions to wind based electricity generation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 27(C), pages 692-708.
    16. Valliyil Mohammed Aboobacker & Puthuveetil Razak Shanas & Subramanian Veerasingam & Ebrahim M. A. S. Al-Ansari & Fadhil N. Sadooni & Ponnumony Vethamony, 2021. "Long-Term Assessment of Onshore and Offshore Wind Energy Potentials of Qatar," Energies, MDPI, vol. 14(4), pages 1-21, February.
    17. Stephan Oelker & Aljoscha Sander & Markus Kreutz & Abderrahim Ait-Alla & Michael Freitag, 2021. "Evaluation of the Impact of Weather-Related Limitations on the Installation of Offshore Wind Turbine Towers," Energies, MDPI, vol. 14(13), pages 1-12, June.
    18. Hunt, Julian David & Nascimento, Andreas & Nascimento, Nazem & Vieira, Lara Werncke & Romero, Oldrich Joel, 2022. "Possible pathways for oil and gas companies in a sustainable future: From the perspective of a hydrogen economy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 160(C).
    19. Radu Saulescu & Mircea Neagoe & Codruta Jaliu & Olimpiu Munteanu, 2021. "A Comparative Performance Analysis of Counter-Rotating Dual-Rotor Wind Turbines with Speed-Adding Increasers," Energies, MDPI, vol. 14(9), pages 1-21, May.
    20. Gerardo Ruiz-Ponce & Marco A. Arjona & Concepcion Hernandez & Rafael Escarela-Perez, 2023. "A Review of Magnetic Gear Technologies Used in Mechanical Power Transmission," Energies, MDPI, vol. 16(4), pages 1-32, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:18:p:6700-:d:913829. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.