IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i10p2927-d557318.html
   My bibliography  Save this article

Research and Development of the Oxy-Fuel Combustion Power Cycles with CO 2 Recirculation

Author

Listed:
  • Andrey Rogalev

    (Department of Innovative Technologies of High-Tech Industries, National Research University “Moscow Power Engineering Institute”, 111250 Moscow, Russia)

  • Nikolay Rogalev

    (Department of Thermal Power Plants, National Research University “Moscow Power Engineering Institute”, 111250 Moscow, Russia)

  • Vladimir Kindra

    (Department of Innovative Technologies of High-Tech Industries, National Research University “Moscow Power Engineering Institute”, 111250 Moscow, Russia)

  • Ivan Komarov

    (Department of Innovative Technologies of High-Tech Industries, National Research University “Moscow Power Engineering Institute”, 111250 Moscow, Russia)

  • Olga Zlyvko

    (Department of Innovative Technologies of High-Tech Industries, National Research University “Moscow Power Engineering Institute”, 111250 Moscow, Russia)

Abstract

The transition to oxy-fuel combustion power cycles is a prospective way to decrease carbon dioxide emissions into the atmosphere from the energy sector. To identify which technology has the highest efficiency and the lowest emission level, a thermodynamic analysis of the semiclosed oxy-fuel combustion combined cycle (SCOC-CC), the E-MATIANT cycle, and the Allam cycle was carried out. The modeling methodology has been described in detail, including the approaches to defining the working fluid properties, the mathematical models of the air separation unit, and the cooled gas turbine cycles’ calculation algorithms. The gas turbine inlet parameters were optimized using the developed modeling methodology for the three oxy-fuel combustion power cycles with CO 2 recirculation in the inlet temperature at a range of 1000 to 1700 °C. The effect of the coolant flow precooling was evaluated. It was found that a decrease in the coolant temperature could lead to an increase of the net efficiency up to 3.2% for the SCOC-CC cycle and up to 0.8% for the E-MATIANT cycle. The final comparison showed that the Allam cycle’s net efficiency is 5.6% higher compared to the SCOC-CC cycle, and 11.5% higher compared with the E-MATIANT cycle.

Suggested Citation

  • Andrey Rogalev & Nikolay Rogalev & Vladimir Kindra & Ivan Komarov & Olga Zlyvko, 2021. "Research and Development of the Oxy-Fuel Combustion Power Cycles with CO 2 Recirculation," Energies, MDPI, vol. 14(10), pages 1-18, May.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:10:p:2927-:d:557318
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/10/2927/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/10/2927/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Aaron Fuller & Jörg Maier & Emmanouil Karampinis & Jana Kalivodova & Panagiotis Grammelis & Emmanuel Kakaras & Günter Scheffknecht, 2018. "Fly Ash Formation and Characteristics from (co-)Combustion of an Herbaceous Biomass and a Greek Lignite (Low-Rank Coal) in a Pulverized Fuel Pilot-Scale Test Facility," Energies, MDPI, vol. 11(6), pages 1-38, June.
    2. Emmanuel Adu & Y.D. Zhang & Dehua Liu & Paitoon Tontiwachwuthikul, 2020. "Parametric Process Design and Economic Analysis of Post-Combustion CO 2 Capture and Compression for Coal- and Natural Gas-Fired Power Plants," Energies, MDPI, vol. 13(10), pages 1-28, May.
    3. Oleksandr Cherednichenko & Valerii Havrysh & Vyacheslav Shebanin & Antonina Kalinichenko & Grzegorz Mentel & Joanna Nakonieczny, 2020. "Local Green Power Supply Plants Based on Alcohol Regenerative Gas Turbines: Economic and Environmental Aspects," Energies, MDPI, vol. 13(9), pages 1-20, May.
    4. Marcin Dutka & Mario Ditaranto & Terese Løvås, 2015. "Application of a Central Composite Design for the Study of NO x Emission Performance of a Low NO x Burner," Energies, MDPI, vol. 8(5), pages 1-22, April.
    5. Lauri Loo & Alar Konist & Dmitri Neshumayev & Tõnu Pihu & Birgit Maaten & Andres Siirde, 2018. "Ash and Flue Gas from Oil Shale Oxy-Fuel Circulating Fluidized Bed Combustion," Energies, MDPI, vol. 11(5), pages 1-12, May.
    6. Scaccabarozzi, Roberto & Gatti, Manuele & Martelli, Emanuele, 2016. "Thermodynamic analysis and numerical optimization of the NET Power oxy-combustion cycle," Applied Energy, Elsevier, vol. 178(C), pages 505-526.
    7. Haibing Liu & Serhat Yüksel & Hasan Dinçer, 2020. "Analyzing the Criteria of Efficient Carbon Capture and Separation Technologies for Sustainable Clean Energy Usage," Energies, MDPI, vol. 13(10), pages 1-12, May.
    8. Nejat, Payam & Jomehzadeh, Fatemeh & Taheri, Mohammad Mahdi & Gohari, Mohammad & Abd. Majid, Muhd Zaimi, 2015. "A global review of energy consumption, CO2 emissions and policy in the residential sector (with an overview of the top ten CO2 emitting countries)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 843-862.
    9. Zhu, Zilong & Chen, Yaping & Wu, Jiafeng & Zhang, Shaobo & Zheng, Shuxing, 2019. "A modified Allam cycle without compressors realizing efficient power generation with peak load shifting and CO2 capture," Energy, Elsevier, vol. 174(C), pages 478-487.
    10. Hyunbin Jo & Kiseop Kang & Jongkeun Park & Changkook Ryu & Hyunsoo Ahn & Younggun Go, 2019. "Optimization of Air Distribution to Reduce NOx Emission and Unburned Carbon for the Retrofit of a 500 MWe Tangential-Firing Coal Boiler," Energies, MDPI, vol. 12(17), pages 1-20, August.
    11. Pfaff, I. & Oexmann, J. & Kather, A., 2010. "Optimised integration of post-combustion CO2 capture process in greenfield power plants," Energy, Elsevier, vol. 35(10), pages 4030-4041.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Andrey Rogalev & Vladimir Kindra & Ivan Komarov & Sergey Osipov & Olga Zlyvko, 2021. "Structural and Parametric Optimization of S-CO 2 Thermal Power Plants with a Pulverized Coal-Fired Boiler Operating in Russia," Energies, MDPI, vol. 14(21), pages 1-20, November.
    2. Andrey Rogalev & Nikolay Rogalev & Vladimir Kindra & Olga Zlyvko & Andrey Vegera, 2021. "A Study of Low-Potential Heat Utilization Methods for Oxy-Fuel Combustion Power Cycles," Energies, MDPI, vol. 14(12), pages 1-14, June.
    3. Lorenzo Colleoni & Alessio Sindoni & Silvia Ravelli, 2023. "Comprehensive Thermodynamic Evaluation of the Natural Gas-Fired Allam Cycle at Full Load," Energies, MDPI, vol. 16(6), pages 1-19, March.
    4. Costante Mario Invernizzi & Gioele Di Marcoberardino, 2023. "An Overview of Real Gas Brayton Power Cycles: Working Fluids Selection and Thermodynamic Implications," Energies, MDPI, vol. 16(10), pages 1-20, May.
    5. Vladimir Kindra & Nikolay Rogalev & Andrey Rogalev & Vladimir Naumov & Ekaterina Sabanova, 2022. "Thermodynamic Optimization of Low-Temperature Cycles for the Power Industry," Energies, MDPI, vol. 15(9), pages 1-21, April.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Daniele Candelaresi & Giuseppe Spazzafumo, 2023. "Production of Substitute Natural Gas Integrated with Allam Cycle for Power Generation," Energies, MDPI, vol. 16(5), pages 1-17, February.
    2. Ong, Chong Wei & Chen, Cheng-Liang, 2021. "Intensification, optimization and economic evaluations of the CO2-capturing oxy-combustion CO2 power system integrated with the utilization of liquefied natural gas cold energy," Energy, Elsevier, vol. 234(C).
    3. Andrey Rogalev & Nikolay Rogalev & Vladimir Kindra & Olga Zlyvko & Andrey Vegera, 2021. "A Study of Low-Potential Heat Utilization Methods for Oxy-Fuel Combustion Power Cycles," Energies, MDPI, vol. 14(12), pages 1-14, June.
    4. Luo, Jing & Emelogu, Ogechi & Morosuk, Tatiana & Tsatsaronis, George, 2021. "Exergy-based investigation of a coal-fired allam cycle," Energy, Elsevier, vol. 218(C).
    5. Sleiti, Ahmad K. & Al-Ammari, Wahib & Ahmed, Samer & Kapat, Jayanta, 2021. "Direct-fired oxy-combustion supercritical-CO2 power cycle with novel preheating configurations -thermodynamic and exergoeconomic analyses," Energy, Elsevier, vol. 226(C).
    6. Dan Fernandes & Song Wang & Qiang Xu & Russel Buss & Daniel Chen, 2019. "Process and Carbon Footprint Analyses of the Allam Cycle Power Plant Integrated with an Air Separation Unit," Clean Technol., MDPI, vol. 1(1), pages 1-16, October.
    7. Andrew Chapman & Timothy Fraser & Melanie Dennis, 2019. "Investigating Ties between Energy Policy and Social Equity Research: A Citation Network Analysis," Social Sciences, MDPI, vol. 8(5), pages 1-18, April.
    8. Agga, Ali & Abbou, Ahmed & Labbadi, Moussa & El Houm, Yassine, 2021. "Short-term self consumption PV plant power production forecasts based on hybrid CNN-LSTM, ConvLSTM models," Renewable Energy, Elsevier, vol. 177(C), pages 101-112.
    9. Ascione, Fabrizio & De Masi, Rosa Francesca & de Rossi, Filippo & Ruggiero, Silvia & Vanoli, Giuseppe Peter, 2016. "Optimization of building envelope design for nZEBs in Mediterranean climate: Performance analysis of residential case study," Applied Energy, Elsevier, vol. 183(C), pages 938-957.
    10. Roula Inglesi-Lotz & Luis Diez del Corral Morales, 2017. "The Effect of Education on a Country’s Energy Consumption: Evidence from Developed and Developing Countries," Working Papers 201733, University of Pretoria, Department of Economics.
    11. Galatioto, A. & Ricciu, R. & Salem, T. & Kinab, E., 2019. "Energy and economic analysis on retrofit actions for Italian public historic buildings," Energy, Elsevier, vol. 176(C), pages 58-66.
    12. Milad Zeraatpisheh & Reza Arababadi & Mohsen Saffari Pour, 2018. "Economic Analysis for Residential Solar PV Systems Based on Different Demand Charge Tariffs," Energies, MDPI, vol. 11(12), pages 1-19, November.
    13. Martelli, Emanuele & Freschini, Marco & Zatti, Matteo, 2020. "Optimization of renewable energy subsidy and carbon tax for multi energy systems using bilevel programming," Applied Energy, Elsevier, vol. 267(C).
    14. Hanak, Dawid P. & Jenkins, Barrie G. & Kruger, Tim & Manovic, Vasilije, 2017. "High-efficiency negative-carbon emission power generation from integrated solid-oxide fuel cell and calciner," Applied Energy, Elsevier, vol. 205(C), pages 1189-1201.
    15. Mohammadpour, Mohammadreza & Houshfar, Ehsan & Ashjaee, Mehdi & Mohammadpour, Amirreza, 2021. "Energy and exergy analysis of biogas fired regenerative gas turbine cycle with CO2 recirculation for oxy-fuel combustion power generation," Energy, Elsevier, vol. 220(C).
    16. Javier Uche & Amaya Martínez-Gracia & Ignacio Zabalza & Sergio Usón, 2024. "Renewable Energy Source (RES)-Based Polygeneration Systems for Multi-Family Houses," Sustainability, MDPI, vol. 16(3), pages 1-21, January.
    17. Ikutegbe, Charles A. & Farid, Mohammed M., 2020. "Application of phase change material foam composites in the built environment: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 131(C).
    18. Li, Biao & Han, Zongwei & Bai, Chenguang & Hu, Honghao, 2019. "The influence of soil thermal properties on the operation performance on ground source heat pump system," Renewable Energy, Elsevier, vol. 141(C), pages 903-913.
    19. Yahya, Syahirah & Muhamad Wahab, Syamsul Kamar & Harun, Farah Wahida, 2020. "Optimization of biodiesel production from waste cooking oil using Fe-Montmorillonite K10 by response surface methodology," Renewable Energy, Elsevier, vol. 157(C), pages 164-172.
    20. Antoni Fonseca i Casas & Pau Fonseca i Casas & Josep Casanovas, 2016. "Analysis of Applications to Improve the Energy Savings in Residential Buildings Based on Systemic Quality Model," Sustainability, MDPI, vol. 8(10), pages 1-18, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:10:p:2927-:d:557318. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.