IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v229y2023ics0951832022005087.html
   My bibliography  Save this article

Risk coupling analysis of road transportation accidents of hazardous materials in complicated maritime environment

Author

Listed:
  • Guo, Jian
  • Luo, Cheng
  • Ma, Kaijiang

Abstract

The complicated maritime environment and multiple risk coupling pose significant challenges to hazardous material transportation safety in coastal areas. This paper studies the risk coupling problems by analyzing 362 hazardous materials accidents. Firstly, the transportation risks are divided into 6 categories and 22 risk factors are identified. Then, the definition and types of risk coupling are determined. Finally, a novel risk coupling model is constructed by using analytic hierarchy process (AHP) and N-K model. AHP–N-K model is used to calculate the coupling degree of risk factors. Furthermore, the correlation mechanism between the risk values and the risk components in complicated maritime environment is analyzed. The results show that the risk of hazardous materials transportation has a gradually increasing trend with the increase of risk coupling factors. Owing to the risk coupling of driver factors and road environmental factors, the probability of accidents is high. The coupling risk of subjective and objective risk factors is more likely to cause accidents than subjective risk factors. The coupling effect of rainy days and curves with other risk factors is very strong.

Suggested Citation

  • Guo, Jian & Luo, Cheng & Ma, Kaijiang, 2023. "Risk coupling analysis of road transportation accidents of hazardous materials in complicated maritime environment," Reliability Engineering and System Safety, Elsevier, vol. 229(C).
    • Handle: RePEc:eee:reensy:v:229:y:2023:i:c:s0951832022005087
    DOI: 10.1016/j.ress.2022.108891
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832022005087
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2022.108891?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Tabandeh, Armin & Sharma, Neetesh & Gardoni, Paolo, 2022. "Uncertainty propagation in risk and resilience analysis of hierarchical systems," Reliability Engineering and System Safety, Elsevier, vol. 219(C).
    2. KIM, Junyung & ZHAO, Xingang & SHAH, Asad Ullah Amin & KANG, Hyun Gook, 2021. "System risk quantification and decision making support using functional modeling and dynamic Bayesian network," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    3. Nejad, Hamed S. & Parhizkar, Tarannom & Mosleh, Ali, 2022. "Automatic generation of event sequence diagrams for guiding simulation based dynamic probabilistic risk assessment (SIMPRA) of complex systems," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    4. Saaty, Thomas L., 1990. "How to make a decision: The analytic hierarchy process," European Journal of Operational Research, Elsevier, vol. 48(1), pages 9-26, September.
    5. Erhan Erkut & Vedat Verter, 1998. "Modeling of Transport Risk for Hazardous Materials," Operations Research, INFORMS, vol. 46(5), pages 625-642, October.
    6. Takeda, Satoshi & Kitada, Takanori, 2021. "Simple method based on sensitivity coefficient for stochastic uncertainty analysis in probabilistic risk assessment," Reliability Engineering and System Safety, Elsevier, vol. 209(C).
    7. Fan, Cunlong & Montewka, Jakub & Zhang, Di, 2022. "A risk comparison framework for autonomous ships navigation," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    8. Jerez, D.J. & Jensen, H.A. & Beer, M., 2022. "An effective implementation of reliability methods for Bayesian model updating of structural dynamic models with multiple uncertain parameters," Reliability Engineering and System Safety, Elsevier, vol. 225(C).
    9. Liu, Aihua & Chen, Ke & Huang, Xiaofei & Li, Didi & Zhang, Xiaochun, 2021. "Dynamic risk assessment model of buried gas pipelines based on system dynamics," Reliability Engineering and System Safety, Elsevier, vol. 208(C).
    10. Renee M. Clark & Mary E. Besterfield‐Sacre, 2009. "A New Approach to Hazardous Materials Transportation Risk Analysis: Decision Modeling to Identify Critical Variables," Risk Analysis, John Wiley & Sons, vol. 29(3), pages 344-354, March.
    11. Godoy, S.M. & Santa Cruz, A.S.M. & Scenna, N.J., 2007. "STRRAP system—A software for hazardous materials risk assessment and safe distances calculation," Reliability Engineering and System Safety, Elsevier, vol. 92(7), pages 847-857.
    12. Gu, Shuang & Li, Keping & Feng, Tao & Yan, Dongyang & Liu, Yanyan, 2022. "The prediction of potential risk path in railway traffic events," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    13. Xifei Huang & Xinhao Wang & Jingjing Pei & Ming Xu & Xiaowu Huang & Yun Luo, 2018. "Risk assessment of the areas along the highway due to hazardous material transportation accidents," Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, Springer;International Society for the Prevention and Mitigation of Natural Hazards, vol. 93(3), pages 1181-1202, September.
    14. Scenna, N.J. & Santa Cruz, A.S.M., 2005. "Road risk analysis due to the transportation of chlorine in Rosario city," Reliability Engineering and System Safety, Elsevier, vol. 90(1), pages 83-90.
    15. Thomas L. Saaty, 2013. "The Modern Science of Multicriteria Decision Making and Its Practical Applications: The AHP/ANP Approach," Operations Research, INFORMS, vol. 61(5), pages 1101-1118, October.
    16. Marle, Franck & Vidal, Ludovic-Alexandre & Bocquet, Jean-Claude, 2013. "Interactions-based risk clustering methodologies and algorithms for complex project management," International Journal of Production Economics, Elsevier, vol. 142(2), pages 225-234.
    17. Liping Liu & Qing Wu & Shuxia Li & Ying Li & Tijun Fan, 2021. "Risk Assessment of Hazmat Road Transportation Considering Environmental Risk under Time-Varying Conditions," IJERPH, MDPI, vol. 18(18), pages 1-19, September.
    18. Julia J. Pet‐Armacost & Jose Sepulveda & Milton Sakude, 1999. "Monte Carlo Sensitivity Analysis of Unknown Parameters in Hazardous Materials Transportation Risk Assessment," Risk Analysis, John Wiley & Sons, vol. 19(6), pages 1173-1184, December.
    19. A. V. Thomas & Satyanarayana Kalidindi & L. S. Ganesh, 2006. "Modelling and assessment of critical risks in BOT road projects," Construction Management and Economics, Taylor & Francis Journals, vol. 24(4), pages 407-424.
    20. Liu, Zengkai & Ma, Qiang & Cai, Baoping & Shi, Xuewei & Zheng, Chao & Liu, Yonghong, 2022. "Risk coupling analysis of subsea blowout accidents based on dynamic Bayesian network and NK model," Reliability Engineering and System Safety, Elsevier, vol. 218(PA).
    21. He, Rui & Zhu, Jingyu & Chen, Guoming & Tian, Zhigang, 2022. "A real-time probabilistic risk assessment method for the petrochemical industry based on data monitoring," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    22. Huang, Wencheng & Yin, Dezhi & Xu, Yifei & Zhang, Rui & Xu, Minhao, 2022. "Using N-K Model to quantitatively calculate the variability in Functional Resonance Analysis Method," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    23. Noguchi, H. & Hienuki, S. & Fuse, M., 2020. "Network theory-based accident scenario analysis for hazardous material transport: A case study of liquefied petroleum gas transport in japan," Reliability Engineering and System Safety, Elsevier, vol. 203(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Jinpei & Bai, Xuejie & Liu, Yankui, 2023. "Globalized robust bilevel optimization model for hazmat transport network design considering reliability," Reliability Engineering and System Safety, Elsevier, vol. 239(C).
    2. Xiaoxiao Geng & Yongwei Lv & Li Zhao & Yingchen Wang, 2023. "Measurement and Simulation of Risk Coupling in Port Hazardous Chemical Logistics," IJERPH, MDPI, vol. 20(5), pages 1-27, February.
    3. Zhang, Hengqi & Geng, Hua & Zeng, Huarong & Jiang, Li, 2023. "Dynamic risk evaluation and control of electrical personal accidents," Reliability Engineering and System Safety, Elsevier, vol. 237(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Izdebski, Mariusz & Jacyna-Gołda, Ilona & Gołda, Paweł, 2022. "Minimisation of the probability of serious road accidents in the transport of dangerous goods," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    2. Xue, Gang & Liu, Shifeng & Ren, Long & Gong, Daqing, 2024. "Risk assessment of utility tunnels through risk interaction-based deep learning," Reliability Engineering and System Safety, Elsevier, vol. 241(C).
    3. Akbari Ahmadabadi, Ali & Heravi, Gholamreza, 2019. "Risk assessment framework of PPP-megaprojects focusing on risk interaction and project success," Transportation Research Part A: Policy and Practice, Elsevier, vol. 124(C), pages 169-188.
    4. Wang, Jian & Gao, Shibin & Yu, Long & Ma, Chaoqun & Zhang, Dongkai & Kou, Lei, 2023. "A data-driven integrated framework for predictive probabilistic risk analytics of overhead contact lines based on dynamic Bayesian network," Reliability Engineering and System Safety, Elsevier, vol. 235(C).
    5. Nathalie de Marcellis-Warin & Ingrid Peignier & Marie-Hélène Leroux & Martin Trépanier, 2010. "Analyse des résultats d'une enquête auprès des entreprises faisant du transport routier de matières dangereuses au Québec," CIRANO Project Reports 2010rp-14, CIRANO.
    6. Kinga Kijewska & Witold Torbacki & Stanisław Iwan, 2018. "Application of AHP and DEMATEL Methods in Choosing and Analysing the Measures for the Distribution of Goods in Szczecin Region," Sustainability, MDPI, vol. 10(7), pages 1-26, July.
    7. Iranitalab, Amirfarrokh & Khattak, Aemal, 2020. "Probabilistic classification of hazardous materials release events in train incidents and cargo tank truck crashes," Reliability Engineering and System Safety, Elsevier, vol. 199(C).
    8. García-Bustamante Carlos Alberto & Zepeda-Pirrón Manuel & Armendáriz-Arnez Cynthia & Aguilar-Rivera Noé, 2018. "Development of indicators for the sustainability of the sugar industry," Environmental & Socio-economic Studies, Sciendo, vol. 6(4), pages 22-38, December.
    9. Caetano, Henrique O. & N., Luiz Desuó & Fogliatto, Matheus S.S. & Maciel, Carlos D., 2024. "Resilience assessment of critical infrastructures using dynamic Bayesian networks and evidence propagation," Reliability Engineering and System Safety, Elsevier, vol. 241(C).
    10. Yutong Xue & Pengcheng Xiang & Fuyuan Jia & Zhaowen Liu, 2020. "Risk Assessment of High-Speed Rail Projects: A Risk Coupling Model Based on System Dynamics," IJERPH, MDPI, vol. 17(15), pages 1-27, July.
    11. Junpai Chen & Yue Chen & Yitong Zhu & Mingyan Xiao & Hongfei Yang & Huaming Huang & Linli Li, 2023. "Assessing the Sustainability of Urban Community Renewal Projects in Southern China Based on a Hybrid MADM Approach," Sustainability, MDPI, vol. 15(4), pages 1-33, February.
    12. Tao, Longlong & Wu, Jie & Ge, Daochuan & Chen, Liwei & Sun, Ming, 2022. "Risk-informed based comprehensive path-planning method for radioactive materials road transportation," Reliability Engineering and System Safety, Elsevier, vol. 219(C).
    13. Javier Puente & Isabel Fernandez & Alberto Gomez & Paolo Priore, 2020. "Integrating Sustainability in the Quality Assessment of EHEA Institutions: A Hybrid FDEMATEL-ANP-FIS Model," Sustainability, MDPI, vol. 12(5), pages 1-22, February.
    14. Natalie M. Scala & Jayant Rajgopal & Luis G. Vargas & Kim LaScola Needy, 2016. "Group Decision Making with Dispersion in the Analytic Hierarchy Process," Group Decision and Negotiation, Springer, vol. 25(2), pages 355-372, March.
    15. Aguilar-Rivera, Noé, 2019. "A framework for the analysis of socioeconomic and geographic sugarcane agro industry sustainability," Socio-Economic Planning Sciences, Elsevier, vol. 66(C), pages 149-160.
    16. Lewis, Austin D. & Groth, Katrina M., 2023. "A comparison of DBN model performance in SIPPRA health monitoring based on different data stream discretization methods," Reliability Engineering and System Safety, Elsevier, vol. 236(C).
    17. Zhang, Hengqi & Geng, Hua & Zeng, Huarong & Jiang, Li, 2023. "Dynamic risk evaluation and control of electrical personal accidents," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    18. Godoy, S.M. & Mores, P.L. & Santa Cruz, A.S.M. & Scenna, N.J., 2009. "Assessment of impact distances for particulate matter dispersion: A stochastic approach," Reliability Engineering and System Safety, Elsevier, vol. 94(10), pages 1658-1665.
    19. Shuxia Li & Yuedan Zu & Huimin Fang & Liping Liu & Tijun Fan, 2021. "Design Optimization of a HAZMAT Multimodal Hub-and-Spoke Network with Detour," IJERPH, MDPI, vol. 18(23), pages 1-18, November.
    20. Xue, Gang & Liu, Shifeng & Ren, Long & Gong, Daqing, 2023. "A data aggregation-based spatiotemporal model for rail transit risk path forecasting," Reliability Engineering and System Safety, Elsevier, vol. 239(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:229:y:2023:i:c:s0951832022005087. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.