IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v221y2022ics0951832022000072.html
   My bibliography  Save this article

A new preventive maintenance strategy optimization model considering lifecycle safety

Author

Listed:
  • Shi, Yan
  • Lu, Zhenzhou
  • Huang, Hongzhong
  • Liu, Yu
  • Li, Yanfeng
  • Zio, Enrico
  • Zhou, Yicheng

Abstract

Preventive maintenance can improve the structure reliability at the same time balance the cost, thus it has gained widespread concern during the past decades. This work focuses on establishing a general preventive maintenance strategy optimization (PMSO) model for structure by deeply exploring the effect of maintenance on structure performance function, with which the reliability is estimated instead of directly assuming a reliability function for structure. At the same time, the lifecycle safety of structure under maintenance is employed to identify the maintenance strategy since it can provide the solution by considering the different operation time intervals as a whole so that people can fully grasp the maintenance effect. This model is established by decomposing the lifecycle failure state as different failure states or conditional failure states during different operation time intervals, and lifecycle failure probability is finally described by the joint time-dependent failure probability of different operation time intervals after further derivation. Furthermore, an advanced estimation strategy is proposed, in which only one surrogate model is construct and it can accurately estimate the failure probabilities of different performance functions. Then, a two-level surrogate model is further constructed to deal with the difficulties of optimization and stochastic simulation variability in identifying the optimal maintenance time. Several engineering applications are employed to show the effectiveness of the established PMSO model and strategy.

Suggested Citation

  • Shi, Yan & Lu, Zhenzhou & Huang, Hongzhong & Liu, Yu & Li, Yanfeng & Zio, Enrico & Zhou, Yicheng, 2022. "A new preventive maintenance strategy optimization model considering lifecycle safety," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    • Handle: RePEc:eee:reensy:v:221:y:2022:i:c:s0951832022000072
    DOI: 10.1016/j.ress.2022.108325
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832022000072
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2022.108325?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hu, Jiawen & Chen, Piao, 2020. "Predictive maintenance of systems subject to hard failure based on proportional hazards model," Reliability Engineering and System Safety, Elsevier, vol. 196(C).
    2. Kroetz, H.M. & Moustapha, M. & Beck, A.T. & Sudret, B., 2020. "A Two-Level Kriging-Based Approach with Active Learning for Solving Time-Variant Risk Optimization Problems," Reliability Engineering and System Safety, Elsevier, vol. 203(C).
    3. Erkoyuncu, John Ahmet & Khan, Samir & Eiroa, Alexandre López & Butler, Nigel & Rushton, Keith & Brocklebank, Simon, 2017. "Perspectives on trading cost and availability for corrective maintenance at the equipment type level," Reliability Engineering and System Safety, Elsevier, vol. 168(C), pages 53-69.
    4. Selvik, J.T. & Aven, T., 2011. "A framework for reliability and risk centered maintenance," Reliability Engineering and System Safety, Elsevier, vol. 96(2), pages 324-331.
    5. Bruce Ankenman & Barry L. Nelson & Jeremy Staum, 2010. "Stochastic Kriging for Simulation Metamodeling," Operations Research, INFORMS, vol. 58(2), pages 371-382, April.
    6. Torii, A.J. & Lopez, R.H. & Miguel, L.F.F., 2019. "A second order SAP algorithm for risk and reliability based design optimization," Reliability Engineering and System Safety, Elsevier, vol. 190(C), pages 1-1.
    7. Chen, Liwei & Gao, Yansan & Dui, Hongyan & Xing, Liudong, 2021. "Importance measure-based maintenance optimization strategy for pod slewing system," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    8. Shi, Yan & Lu, Zhenzhou & He, Ruyang & Zhou, Yicheng & Chen, Siyu, 2020. "A novel learning function based on Kriging for reliability analysis," Reliability Engineering and System Safety, Elsevier, vol. 198(C).
    9. Rocchetta, R. & Bellani, L. & Compare, M. & Zio, E. & Patelli, E., 2019. "A reinforcement learning framework for optimal operation and maintenance of power grids," Applied Energy, Elsevier, vol. 241(C), pages 291-301.
    10. Yeter, B. & Garbatov, Y. & Guedes Soares, C., 2020. "Risk-based maintenance planning of offshore wind turbine farms," Reliability Engineering and System Safety, Elsevier, vol. 202(C).
    11. Wang, Jingjing & Miao, Yonghao, 2021. "Optimal preventive maintenance policy of the balanced system under the semi-Markov model," Reliability Engineering and System Safety, Elsevier, vol. 213(C).
    12. Jiang, Chen & Yan, Yifang & Wang, Dapeng & Qiu, Haobo & Gao, Liang, 2021. "Global and local Kriging limit state approximation for time-dependent reliability-based design optimization through wrong-classification probability," Reliability Engineering and System Safety, Elsevier, vol. 208(C).
    13. Curcurù, Giuseppe & Galante, Giacomo & Lombardo, Alberto, 2010. "A predictive maintenance policy with imperfect monitoring," Reliability Engineering and System Safety, Elsevier, vol. 95(9), pages 989-997.
    14. Deloux, E. & Castanier, B. & Bérenguer, C., 2009. "Predictive maintenance policy for a gradually deteriorating system subject to stress," Reliability Engineering and System Safety, Elsevier, vol. 94(2), pages 418-431.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Carlon, André Gustavo & Kroetz, Henrique Machado & Torii, André Jacomel & Lopez, Rafael Holdorf & Miguel, Leandro Fleck Fadel, 2022. "Risk optimization using the Chernoff bound and stochastic gradient descent," Reliability Engineering and System Safety, Elsevier, vol. 223(C).
    2. Kim, Seokgoo & Choi, Joo-Ho & Kim, Nam Ho, 2022. "Inspection schedule for prognostics with uncertainty management," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    3. Asadi, Majid, 2023. "On a parametric model for the mean number of system repairs with applications," Reliability Engineering and System Safety, Elsevier, vol. 234(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yang, Meide & Zhang, Dequan & Jiang, Chao & Han, Xu & Li, Qing, 2021. "A hybrid adaptive Kriging-based single loop approach for complex reliability-based design optimization problems," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    2. Li, Xiaoke & Zhu, Heng & Chen, Zhenzhong & Ming, Wuyi & Cao, Yang & He, Wenbin & Ma, Jun, 2022. "Limit state Kriging modeling for reliability-based design optimization through classification uncertainty quantification," Reliability Engineering and System Safety, Elsevier, vol. 224(C).
    3. Zhang, Xiaobo & Lu, Zhenzhou & Cheng, Kai, 2021. "Reliability index function approximation based on adaptive double-loop Kriging for reliability-based design optimization," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    4. Rivier, M. & Congedo, P.M., 2022. "Surrogate-Assisted Bounding-Box approach applied to constrained multi-objective optimisation under uncertainty," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    5. Pinciroli, Luca & Baraldi, Piero & Zio, Enrico, 2023. "Maintenance optimization in industry 4.0," Reliability Engineering and System Safety, Elsevier, vol. 234(C).
    6. Yiwei Wang & Christian Gogu & Nicolas Binaud & Christian Bes & Raphael T Haftka & Nam-Ho Kim, 2018. "Predictive airframe maintenance strategies using model-based prognostics," Journal of Risk and Reliability, , vol. 232(6), pages 690-709, December.
    7. Vrignat, Pascal & Kratz, Frédéric & Avila, Manuel, 2022. "Sustainable manufacturing, maintenance policies, prognostics and health management: A literature review," Reliability Engineering and System Safety, Elsevier, vol. 218(PA).
    8. Saleh, Ali & Chiachío, Manuel & Salas, Juan Fernández & Kolios, Athanasios, 2023. "Self-adaptive optimized maintenance of offshore wind turbines by intelligent Petri nets," Reliability Engineering and System Safety, Elsevier, vol. 231(C).
    9. Ma, Yuan-Zhuo & Jin, Xiang-Xiang & Wu, Xi-Long & Xu, Chang & Li, Hong-Shuang & Zhao, Zhen-Zhou, 2023. "Reliability-based design optimization using adaptive Kriging-A single-loop strategy and a double-loop one," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    10. Zhao, Zhao & Zhao, Yan-Gang & Li, Pei-Pei, 2023. "A novel decoupled time-variant reliability-based design optimization approach by improved extreme value moment method," Reliability Engineering and System Safety, Elsevier, vol. 229(C).
    11. Carlon, André Gustavo & Kroetz, Henrique Machado & Torii, André Jacomel & Lopez, Rafael Holdorf & Miguel, Leandro Fleck Fadel, 2022. "Risk optimization using the Chernoff bound and stochastic gradient descent," Reliability Engineering and System Safety, Elsevier, vol. 223(C).
    12. Asadzadeh, S.M. & Azadeh, A., 2014. "An integrated systemic model for optimization of condition-based maintenance with human error," Reliability Engineering and System Safety, Elsevier, vol. 124(C), pages 117-131.
    13. Ehsan Mehdad & Jack P. C. Kleijnen, 2018. "Efficient global optimisation for black-box simulation via sequential intrinsic Kriging," Journal of the Operational Research Society, Taylor & Francis Journals, vol. 69(11), pages 1725-1737, November.
    14. Sadeghian, Omid & Mohammadpour Shotorbani, Amin & Mohammadi-Ivatloo, Behnam & Sadiq, Rehan & Hewage, Kasun, 2021. "Risk-averse maintenance scheduling of generation units in combined heat and power systems with demand response," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    15. Xiao, Mi & Zhang, Jinhao & Gao, Liang, 2021. "A Kriging-assisted sampling method for reliability analysis of structures with hybrid uncertainties," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    16. Nyong-Bassey, Bassey Etim & Giaouris, Damian & Patsios, Charalampos & Papadopoulou, Simira & Papadopoulos, Athanasios I. & Walker, Sara & Voutetakis, Spyros & Seferlis, Panos & Gadoue, Shady, 2020. "Reinforcement learning based adaptive power pinch analysis for energy management of stand-alone hybrid energy storage systems considering uncertainty," Energy, Elsevier, vol. 193(C).
    17. Ehsan Mehdad & Jack P.C. Kleijnen, 2018. "Stochastic intrinsic Kriging for simulation metamodeling," Applied Stochastic Models in Business and Industry, John Wiley & Sons, vol. 34(3), pages 322-337, May.
    18. Dang, Chao & Wei, Pengfei & Faes, Matthias G.R. & Valdebenito, Marcos A. & Beer, Michael, 2022. "Parallel adaptive Bayesian quadrature for rare event estimation," Reliability Engineering and System Safety, Elsevier, vol. 225(C).
    19. Songhao Wang & Szu Hui Ng & William Benjamin Haskell, 2022. "A Multilevel Simulation Optimization Approach for Quantile Functions," INFORMS Journal on Computing, INFORMS, vol. 34(1), pages 569-585, January.
    20. Finkelstein, Maxim & Cha, Ji Hwan & Langston, Amy, 2023. "Improving classical optimal age-replacement policies for degrading items," Reliability Engineering and System Safety, Elsevier, vol. 236(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:221:y:2022:i:c:s0951832022000072. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.