IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v72y2014icp215-221.html
   My bibliography  Save this article

Fabrication and operating characteristics of a flat tubular segmented-in-series solid oxide fuel cell unit bundle

Author

Listed:
  • Kim, Dae-Wi
  • Yun, Ui-Jin
  • Lee, Jong-Won
  • Lim, Tak-Hyoung
  • Lee, Seung-Bok
  • Park, Seok-Joo
  • Song, Rak-Hyun
  • Kim, Guntae

Abstract

A unit bundle of a flat tubular segmented-in-series (SIS)-solid oxide fuel cell (SOFC) for intermediate temperature (650–800 °C) operation was fabricated and operated in this study. We fabricated flat tubular ceramic supports through an extrusion process and analyzed the basic properties of the flat tubular ceramic support: the visible microstructure, porosity, mechanical strength, and pore size distribution. After that, we manufactured a flat tubular SIS-SOFC single cell using screen printing and a vacuum slurry dip-coating method for the electrode/interconnect and electrolyte. In addition, to make a unit bundle for a flat tubular SIS-SOFC, five SIS-SOFC single cells with an effective electrode area of 0.8 cm2 were coated onto the surface of the prepared ceramic support and were connected in series using an Ag + glass interconnect between each single SIS-SOFC cell. The performance of the 5-cell unit bundle for a flat tubular SIS-SOFC in 3% humidified H2 and air at 800 °C had a maximum power of 2.5 W.

Suggested Citation

  • Kim, Dae-Wi & Yun, Ui-Jin & Lee, Jong-Won & Lim, Tak-Hyoung & Lee, Seung-Bok & Park, Seok-Joo & Song, Rak-Hyun & Kim, Guntae, 2014. "Fabrication and operating characteristics of a flat tubular segmented-in-series solid oxide fuel cell unit bundle," Energy, Elsevier, vol. 72(C), pages 215-221.
  • Handle: RePEc:eee:energy:v:72:y:2014:i:c:p:215-221
    DOI: 10.1016/j.energy.2014.05.026
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544214005751
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2014.05.026?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kim, Kyeong Hyun & Park, Young Min & Kim, Haekyoung, 2010. "Fabrication and evaluation of the thin NiFe supported solid oxide fuel cell by co-firing method," Energy, Elsevier, vol. 35(12), pages 5385-5390.
    2. Rokni, Masoud, 2010. "Plant characteristics of an integrated solid oxide fuel cell cycle and a steam cycle," Energy, Elsevier, vol. 35(12), pages 4691-4699.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhao, Hongbin & Jiang, Ting & Hou, Hucan, 2015. "Performance analysis of the SOFC–CCHP system based on H2O/Li–Br absorption refrigeration cycle fueled by coke oven gas," Energy, Elsevier, vol. 91(C), pages 983-993.
    2. Lee, Dong-Young & Mehran, Muhammad Taqi & Kim, Jonghwan & Kim, Sangcho & Lee, Seung-Bok & Song, Rak-Hyun & Ko, Eun-Yong & Hong, Jong-Eun & Huh, Joo-Youl & Lim, Tak-Hyoung, 2020. "Scaling up syngas production with controllable H2/CO ratio in a highly efficient, compact, and durable solid oxide coelectrolysis cell unit-bundle," Applied Energy, Elsevier, vol. 257(C).
    3. Chang, Ikwhang & Bae, Jiwoong & Park, Joonho & Lee, Sunho & Ban, Myeongseok & Park, Taehyun & Lee, Yoon Ho & Song, Han Ho & Kim, Young-Beom & Cha, Suk Won, 2016. "A thermally self-sustaining solid oxide fuel cell system at ultra-low operating temperature (319 °C)," Energy, Elsevier, vol. 104(C), pages 107-113.
    4. Mehran, Muhammad Taqi & Lim, Tak-Hyoung & Lee, Seung-Bok & Lee, Jong-Won & Park, Seok-Ju & Song, Rak-Hyun, 2016. "Long-term performance degradation study of solid oxide carbon fuel cells integrated with a steam gasifier," Energy, Elsevier, vol. 113(C), pages 1051-1061.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Barelli, L. & Ottaviano, A., 2014. "Solid oxide fuel cell technology coupled with methane dry reforming: A viable option for high efficiency plant with reduced CO2 emissions," Energy, Elsevier, vol. 71(C), pages 118-129.
    2. Rokni, Masoud, 2014. "Biomass gasification integrated with a solid oxide fuel cell and Stirling engine," Energy, Elsevier, vol. 77(C), pages 6-18.
    3. Bellomare, Filippo & Rokni, Masoud, 2013. "Integration of a municipal solid waste gasification plant with solid oxide fuel cell and gas turbine," Renewable Energy, Elsevier, vol. 55(C), pages 490-500.
    4. Iliya Krastev Iliev & Antonina Andreevna Filimonova & Andrey Alexandrovich Chichirov & Natalia Dmitrievna Chichirova & Alexander Vadimovich Pechenkin & Artem Sergeevich Vinogradov, 2023. "Theoretical and Experimental Studies of Combined Heat and Power Systems with SOFCs," Energies, MDPI, vol. 16(4), pages 1-17, February.
    5. Pierobon, Leonardo & Nguyen, Tuong-Van & Larsen, Ulrik & Haglind, Fredrik & Elmegaard, Brian, 2013. "Multi-objective optimization of organic Rankine cycles for waste heat recovery: Application in an offshore platform," Energy, Elsevier, vol. 58(C), pages 538-549.
    6. Tamilarasan, P. & Ramaprabhu, S., 2013. "Graphene based all-solid-state supercapacitors with ionic liquid incorporated polyacrylonitrile electrolyte," Energy, Elsevier, vol. 51(C), pages 374-381.
    7. AlZahrani, Abdullah A. & Dincer, Ibrahim, 2022. "Assessment of a thin-electrolyte solid oxide cell for hydrogen production," Energy, Elsevier, vol. 243(C).
    8. Huaiyu Shao, 2017. "Heat Modeling and Material Development of Mg-Based Nanomaterials Combined with Solid Oxide Fuel Cell for Stationary Energy Storage," Energies, MDPI, vol. 10(11), pages 1-11, November.
    9. Abid Rabbani & Masoud Rokni, 2014. "Modeling and Analysis of Transport Processes and Efficiency of Combined SOFC and PEMFC Systems," Energies, MDPI, vol. 7(9), pages 1-21, August.
    10. Park, K. & Hwang, H.K., 2013. "Fabrication and electrical properties of nanocrystalline Dy3+-doped CeO2 for intermediate-temperature solid oxide fuel cells," Energy, Elsevier, vol. 55(C), pages 304-309.
    11. Vialetto, Giulio & Rokni, Masoud, 2015. "Innovative household systems based on solid oxide fuel cells for a northern European climate," Renewable Energy, Elsevier, vol. 78(C), pages 146-156.
    12. Chen, Guihua & Wang, Yong & Sunarso, Jaka & Liang, Fengli & Wang, Huanping, 2016. "A new scandium and niobium co-doped cobalt-free perovskite cathode for intermediate-temperature solid oxide fuel cells," Energy, Elsevier, vol. 95(C), pages 137-143.
    13. Rokni, Masoud, 2014. "Thermodynamic and thermoeconomic analysis of a system with biomass gasification, solid oxide fuel cell (SOFC) and Stirling engine," Energy, Elsevier, vol. 76(C), pages 19-31.
    14. Rokni, Masoud, 2013. "Thermodynamic analysis of SOFC (solid oxide fuel cell)–Stirling hybrid plants using alternative fuels," Energy, Elsevier, vol. 61(C), pages 87-97.
    15. Masoud Rokni, 2016. "Performance Comparison on Repowering of a Steam Power Plant with Gas Turbines and Solid Oxide Fuel Cells," Energies, MDPI, vol. 9(6), pages 1-22, May.
    16. Zhou, Juan & Liu, Qinglin & Zhang, Lan & Pan, Zehua & Chan, Siew Hwa, 2016. "Influence of pore former on electrochemical performance of fuel-electrode supported SOFCs manufactured by aqueous-based tape-casting," Energy, Elsevier, vol. 115(P1), pages 149-154.
    17. Mazzucco, Andrea & Rokni, Masoud, 2014. "Thermo-economic analysis of a solid oxide fuel cell and steam injected gas turbine plant integrated with woodchips gasification," Energy, Elsevier, vol. 76(C), pages 114-129.
    18. Pierobon, Leonardo & Rokni, Masoud & Larsen, Ulrik & Haglind, Fredrik, 2013. "Thermodynamic analysis of an integrated gasification solid oxide fuel cell plant combined with an organic Rankine cycle," Renewable Energy, Elsevier, vol. 60(C), pages 226-234.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:72:y:2014:i:c:p:215-221. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.