IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v115y2016ip1p149-154.html
   My bibliography  Save this article

Influence of pore former on electrochemical performance of fuel-electrode supported SOFCs manufactured by aqueous-based tape-casting

Author

Listed:
  • Zhou, Juan
  • Liu, Qinglin
  • Zhang, Lan
  • Pan, Zehua
  • Chan, Siew Hwa

Abstract

The microstructure of a fuel electrode has a significant influence on the whole performance of fuel-electrode supported solid oxide fuel cells (SOFCs) fabricated by aqueous-based tape casting. While in the aqueous-based tape casting process, the fuel electrode porosity, which plays a key role in the final fuel electrode microstructure, mainly comes from the pore former (potato starch in this case). Different contents of starch are added into fuel electrode slurries. When the starch content is 2.5%wt, the cells show the best performance. After one thermal cycle and discharging at a constant voltage of 0.7 V and temperature of 800 °C, the peak power density has reached ∼1263 mW cm−2 with humidified H2 as the fuel and air as the oxidant.

Suggested Citation

  • Zhou, Juan & Liu, Qinglin & Zhang, Lan & Pan, Zehua & Chan, Siew Hwa, 2016. "Influence of pore former on electrochemical performance of fuel-electrode supported SOFCs manufactured by aqueous-based tape-casting," Energy, Elsevier, vol. 115(P1), pages 149-154.
    • Handle: RePEc:eee:energy:v:115:y:2016:i:p1:p:149-154
    DOI: 10.1016/j.energy.2016.08.093
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544216312063
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2016.08.093?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Tonekabonimoghadam, S. & Akikur, R.K. & Hussain, M.A. & Hajimolana, S. & Saidur, R. & Ping, H.W. & Chakrabarti, M.H. & Brandon, N.P. & Aravind, P.V. & Nayagar, J.N.S. & Hashim, M.A., 2015. "Mathematical modelling and experimental validation of an anode-supported tubular solid oxide fuel cell for heat and power generation," Energy, Elsevier, vol. 90(P2), pages 1759-1768.
    2. Amedi, Hamid Reza & Bazooyar, Bahamin & Pishvaie, Mahmoud Reza, 2015. "Control of anode supported SOFCs (solid oxide fuel cells): Part I. mathematical modeling and state estimation within one cell," Energy, Elsevier, vol. 90(P1), pages 605-621.
    3. Kim, Kyeong Hyun & Park, Young Min & Kim, Haekyoung, 2010. "Fabrication and evaluation of the thin NiFe supported solid oxide fuel cell by co-firing method," Energy, Elsevier, vol. 35(12), pages 5385-5390.
    4. Appleby, A.J., 1996. "Fuel cell technology: Status and future prospects," Energy, Elsevier, vol. 21(7), pages 521-653.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Pan, Zehua & Liu, Qinglin & Zhang, Lan & Zhou, Juan & Zhang, Caizhi & Chan, Siew Hwa, 2017. "Experimental and thermodynamic study on the performance of water electrolysis by solid oxide electrolyzer cells with Nb-doped Co-based perovskite anode," Applied Energy, Elsevier, vol. 191(C), pages 559-567.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Dang, Zheng & Xu, Han, 2016. "Pore scale investigation of gaseous mixture flow in porous anode of solid oxide fuel cell," Energy, Elsevier, vol. 107(C), pages 295-304.
    2. Keramiotis, Ch. & Vourliotakis, G. & Skevis, G. & Founti, M.A. & Esarte, C. & Sánchez, N.E. & Millera, A. & Bilbao, R. & Alzueta, M.U., 2012. "Experimental and computational study of methane mixtures pyrolysis in a flow reactor under atmospheric pressure," Energy, Elsevier, vol. 43(1), pages 103-110.
    3. Jiao, Yong & Zhang, Liqin & An, Wenting & Zhou, Wei & Sha, Yujing & Shao, Zongping & Bai, Jianping & Li, Si-Dian, 2016. "Controlled deposition and utilization of carbon on Ni-YSZ anodes of SOFCs operating on dry methane," Energy, Elsevier, vol. 113(C), pages 432-443.
    4. Lee, Won-Yong & Kim, Minjin & Sohn, Young-Jun & Kim, Seung-Gon, 2016. "Power optimization of a combined power system consisting of a high-temperature polymer electrolyte fuel cell and an organic Rankine cycle system," Energy, Elsevier, vol. 113(C), pages 1062-1070.
    5. Tamilarasan, P. & Ramaprabhu, S., 2013. "Graphene based all-solid-state supercapacitors with ionic liquid incorporated polyacrylonitrile electrolyte," Energy, Elsevier, vol. 51(C), pages 374-381.
    6. AlZahrani, Abdullah A. & Dincer, Ibrahim, 2022. "Assessment of a thin-electrolyte solid oxide cell for hydrogen production," Energy, Elsevier, vol. 243(C).
    7. Daria Kolbantseva & Dmitriy Treschev & Milana Trescheva & Irina Anikina & Yuriy Kolbantsev & Konstantin Kalmykov & Alena Aleshina & Aleksandr Kalyutik & Iaroslav Vladimirov, 2022. "Analysis of Technologies for Hydrogen Consumption, Transition and Storage at Operating Thermal Power Plants," Energies, MDPI, vol. 15(10), pages 1-30, May.
    8. Jiang, Jianhua & Shen, Tan & Deng, Zhonghua & Fu, Xiaowei & Li, Jian & Li, Xi, 2018. "High efficiency thermoelectric cooperative control of a stand-alone solid oxide fuel cell system with an air bypass valve," Energy, Elsevier, vol. 152(C), pages 13-26.
    9. Sun, Qie & Li, Hailong & Yan, Jinying & Liu, Longcheng & Yu, Zhixin & Yu, Xinhai, 2015. "Selection of appropriate biogas upgrading technology-a review of biogas cleaning, upgrading and utilisation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 521-532.
    10. Lee, Won-Yong & Kim, Minjin & Sohn, Young-Jun & Kim, Seung-Gon, 2017. "Performance of a hybrid system consisting of a high-temperature polymer electrolyte fuel cell and an absorption refrigerator," Energy, Elsevier, vol. 141(C), pages 2397-2407.
    11. Díaz, Manuel Antonio & Iranzo, Alfredo & Rosa, Felipe & Isorna, Fernando & López, Eduardo & Bolivar, Juan Pedro, 2015. "Effect of carbon dioxide on the contamination of low temperature and high temperature PEM (polymer electrolyte membrane) fuel cells. Influence of temperature, relative humidity and analysis of regener," Energy, Elsevier, vol. 90(P1), pages 299-309.
    12. Lee, Sanghyeok & Park, Mansoo & Kim, Hyoungchul & Yoon, Kyung Joong & Son, Ji-Won & Lee, Jong-Ho & Kim, Byung-Kook & Choi, Wonjoon & Hong, Jongsup, 2017. "Thermal conditions and heat transfer characteristics of high-temperature solid oxide fuel cells investigated by three-dimensional numerical simulations," Energy, Elsevier, vol. 120(C), pages 293-305.
    13. Rashid, Kashif & Dong, Sang Keun & Mehran, Muhammad Taqi, 2017. "Numerical investigations to determine the optimal operating conditions for 1 kW-class flat-tubular solid oxide fuel cell stack," Energy, Elsevier, vol. 141(C), pages 673-691.
    14. Nerat, Marko, 2017. "Modeling and analysis of short-period transient response of a single, planar, anode supported, solid oxide fuel cell during load variations," Energy, Elsevier, vol. 138(C), pages 728-738.
    15. Barelli, L. & Bidini, G. & Ottaviano, A., 2016. "Solid oxide fuel cell modelling: Electrochemical performance and thermal management during load-following operation," Energy, Elsevier, vol. 115(P1), pages 107-119.
    16. Roberto Schaeffer & Jeffrey Logan & Alexandre Szklo & William Chandler & João de Souza Marques, 2001. "Brazil's Electric Power Choices and Their Corresponding Carbon Emissions Implications," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 6(1), pages 47-69, March.
    17. Sadhukhan, Jhuma & Lloyd, Jon R. & Scott, Keith & Premier, Giuliano C. & Yu, Eileen H. & Curtis, Tom & Head, Ian M., 2016. "A critical review of integration analysis of microbial electrosynthesis (MES) systems with waste biorefineries for the production of biofuel and chemical from reuse of CO2," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 116-132.
    18. Zhang, Houcheng & Lin, Guoxing & Chen, Jincan, 2011. "The performance analysis and multi-objective optimization of a typical alkaline fuel cell," Energy, Elsevier, vol. 36(7), pages 4327-4332.
    19. Papadias, Dionissios D. & Ahmed, Shabbir & Kumar, Romesh, 2012. "Fuel quality issues with biogas energy – An economic analysis for a stationary fuel cell system," Energy, Elsevier, vol. 44(1), pages 257-277.
    20. Ghosh, P.C. & Vasudeva, U., 2011. "Analysis of 3000T class submarines equipped with polymer electrolyte fuel cells," Energy, Elsevier, vol. 36(5), pages 3138-3147.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:115:y:2016:i:p1:p:149-154. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.