IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v218y2021ics0360544220325810.html
   My bibliography  Save this article

Experimental study on spray characteristics of six-component diesel surrogate fuel under sub/trans/supercritical conditions with different injection pressures

Author

Listed:
  • Zhang, Qiankun
  • Xia, Jin
  • He, Zhuoyao
  • Wang, Jianping
  • Liu, Rui
  • Zheng, Liang
  • Qian, Yong
  • Ju, Dehao
  • Lu, Xingcai

Abstract

The purpose of this study is to explore the spray characteristics of six-component diesel surrogate fuel under sub/trans/supercritical conditions with different injection pressures and provide a reference for numerical simulation. The experiments were conducted in a constant volume chamber. The liquid- and vapor-phase spray images were captured by backlight illumination and schlieren imaging technology, respectively. Some macroscopic parameters were obtained and analyzed, such as spray structure, spray penetration, liquid-core index, spray cone angle, gas entrainment mass, spray perimeter, spray area, and spray irregularity. Results show that the variation law of the liquid-phase penetration shows opposite trend with injection pressure depending on ambient temperature. The liquid-phase spray is more stable with a smoother surface under supercritical conditions. The spray cone angle is mainly related to ambient temperature and pressure. The gas entrainment mass increases with decreasing ambient temperature or increasing ambient pressure. When the ambient pressure is twice fuel’s critical pressure, the liquid-phase spray irregularity is smaller, but an increase in injection pressure can further increase the spray irregularity. When the ambient temperature is higher than the critical temperature, increasing the injection pressure or ambient pressure is conducive to increasing the ratio of pure vapor-phase spray and improving the spray characteristics.

Suggested Citation

  • Zhang, Qiankun & Xia, Jin & He, Zhuoyao & Wang, Jianping & Liu, Rui & Zheng, Liang & Qian, Yong & Ju, Dehao & Lu, Xingcai, 2021. "Experimental study on spray characteristics of six-component diesel surrogate fuel under sub/trans/supercritical conditions with different injection pressures," Energy, Elsevier, vol. 218(C).
    • Handle: RePEc:eee:energy:v:218:y:2021:i:c:s0360544220325810
    DOI: 10.1016/j.energy.2020.119474
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220325810
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.119474?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Liu, Xinlei & Wang, Hu & Wang, Xiaofeng & Zheng, Zunqing & Yao, Mingfa, 2017. "Experimental and modelling investigations of the diesel surrogate fuels in direct injection compression ignition combustion," Applied Energy, Elsevier, vol. 189(C), pages 187-200.
    2. Qian, Yong & Yu, Liang & Li, Zilong & Zhang, Yahui & Xu, Leilei & Zhou, Qiyan & Han, Dong & Lu, Xingcai, 2018. "A new methodology for diesel surrogate fuel formulation: Bridging fuel fundamental properties and real engine combustion characteristics," Energy, Elsevier, vol. 148(C), pages 424-447.
    3. N/A, 2009. "On the Recession," Local Economy, London South Bank University, vol. 24(3), pages 253-253, May.
    4. Chen, Longfei & Li, Guangze & Huang, Dongqi & Zhang, Zhichao & Lu, Yiji & Yu, Xiaoli & Roskilly, Anthony Paul, 2019. "Experimental and numerical study on the initial tip structure evolution of diesel fuel spray under various injection and ambient pressures," Energy, Elsevier, vol. 186(C).
    5. Qian, Yong & Wu, Zhiyong & Guo, Jinjing & Li, Zilong & Jiang, Chenxu & Lu, Xingcai, 2019. "Experimental studies on the key parameters controlling the combustion and emission in premixed charge compression ignition concept based on diesel surrogates," Applied Energy, Elsevier, vol. 235(C), pages 233-246.
    6. Sun, Xiuxiu & Liang, Xingyu & Shu, Gequn & lin, Jiansheng & Wei, Haiqiao & Zhou, Peilin, 2018. "Development of a surrogate fuel mechanism for application in two-stroke marine diesel engine," Energy, Elsevier, vol. 153(C), pages 56-64.
    7. Hongzhan Xie & Lanbo Song & Yizhi Xie & Dong Pi & Chunyu Shao & Qizhao Lin, 2015. "An Experimental Study on the Macroscopic Spray Characteristics of Biodiesel and Diesel in a Constant Volume Chamber," Energies, MDPI, vol. 8(6), pages 1-21, June.
    8. Huang, Zhong & Xu, Xiaochen & Ju, Dehao & Han, Dong & Qiao, Xinqi & Huang, Zhen, 2018. "Development of multi-component surrogates of diesel from indirect coal liquefaction for spray analysis," Energy, Elsevier, vol. 152(C), pages 341-347.
    9. Jain, Ayush & Singh, Akhilendra Pratap & Agarwal, Avinash Kumar, 2017. "Effect of fuel injection parameters on combustion stability and emissions of a mineral diesel fueled partially premixed charge compression ignition (PCCI) engine," Applied Energy, Elsevier, vol. 190(C), pages 658-669.
    10. Mohan, Balaji & Yang, Wenming & Chou, Siaw kiang, 2013. "Fuel injection strategies for performance improvement and emissions reduction in compression ignition engines—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 664-676.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ba, Jin & Wei, Wu & Zhao, Lun & Gang, Xiao & Dong, Wenzhi & Zhou, Tingyu, 2023. "Numerical simulation of trans-/near-/supercritical injection characteristics based on real fluid properties," Energy, Elsevier, vol. 278(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Moon, Seoksu & Huang, Weidi & Li, Zhilong & Wang, Jin, 2016. "End-of-injection fuel dribble of multi-hole diesel injector: Comprehensive investigation of phenomenon and discussion on control strategy," Applied Energy, Elsevier, vol. 179(C), pages 7-16.
    2. Qian, Yong & Wu, Zhiyong & Guo, Jinjing & Li, Zilong & Jiang, Chenxu & Lu, Xingcai, 2019. "Experimental studies on the key parameters controlling the combustion and emission in premixed charge compression ignition concept based on diesel surrogates," Applied Energy, Elsevier, vol. 235(C), pages 233-246.
    3. Huang, Haozhong & Lv, Delin & Chen, Yingjie & Zhu, Jizhen & Zhu, Zhaojun & Pan, Mingzhang & Chen, Yajuan & Teng, Wenwen, 2019. "Development and validation of a reduced multi-component mechanism for diesel engine application," Applied Energy, Elsevier, vol. 254(C).
    4. Tomanova, Lucie, 2013. "Exchange Rate Volatility and the Foreign Trade in CEEC," EY International Congress on Economics I (EYC2013), October 24-25, 2013, Ankara, Turkey 267, Ekonomik Yaklasim Association.
    5. Jean Imbs, 2010. "The First Global Recession in Decades," IMF Economic Review, Palgrave Macmillan;International Monetary Fund, vol. 58(2), pages 327-354, December.
    6. Lídia Farré & Francesco Fasani & Hannes Mueller, 2018. "Feeling useless: the effect of unemployment on mental health in the Great Recession," IZA Journal of Labor Economics, Springer;Forschungsinstitut zur Zukunft der Arbeit GmbH (IZA), vol. 7(1), pages 1-34, December.
    7. Daniel Fackler & Claus Schnabel & Joachim Wagner, 2013. "Establishment exits in Germany: the role of size and age," Small Business Economics, Springer, vol. 41(3), pages 683-700, October.
    8. Stijn Claessens & M. Ayhan Kose, 2013. "Financial Crises: Explanations, Types and Implications," CAMA Working Papers 2013-06, Centre for Applied Macroeconomic Analysis, Crawford School of Public Policy, The Australian National University.
    9. Owyang, Michael T. & Piger, Jeremy & Wall, Howard J., 2013. "Discordant city employment cycles," Regional Science and Urban Economics, Elsevier, vol. 43(2), pages 367-384.
    10. Dovern, Jonas & Jannsen, Nils, 2009. "Estimating the shape of economic crises under heterogeneity," Kiel Working Papers 1520, Kiel Institute for the World Economy (IfW Kiel).
    11. Mathilde Maurel & Gunther Schnabl, 2012. "Keynesian and Austrian Perspectives on Crisis, Shock Adjustment, Exchange Rate Regime and (Long-Term) Growth," Open Economies Review, Springer, vol. 23(5), pages 847-868, November.
    12. Xu, Leilei & Bai, Xue-Song & Li, Changle & Tunestål, Per & Tunér, Martin & Lu, Xingcai, 2019. "Combustion characteristics of gasoline DICI engine in the transition from HCCI to PPC: Experiment and numerical analysis," Energy, Elsevier, vol. 185(C), pages 922-937.
    13. Thomas F. Crossley & Hamish Low & Cormac O'Dea, 2013. "Household Consumption through Recent Recessions," Fiscal Studies, Institute for Fiscal Studies, vol. 34(2), pages 203-229, June.
    14. Lei Zhang & Tiexiong Su & Yangang Zhang & Fukang Ma & Jinguan Yin & Yaonan Feng, 2017. "Numerical Investigation of the Effects of Split Injection Strategies on Combustion and Emission in an Opposed-Piston, Opposed-Cylinder (OPOC) Two-Stroke Diesel Engine," Energies, MDPI, vol. 10(5), pages 1-17, May.
    15. Selim Elekdag & Ibrahim Burak Kanli & Zahid Samancioglu & Cagri Sarikaya, 2010. "Finansal Stres ve Iktisadi Faaliyet," Central Bank Review, Research and Monetary Policy Department, Central Bank of the Republic of Turkey, vol. 10(2), pages 1-8.
    16. M S Mohanty & Fabrizio Zampolli, 2009. "Government size and macroeconomic stability," BIS Quarterly Review, Bank for International Settlements, December.
    17. Tom Ferris & Theo Thomas, 2009. "Review of Public Investment Management Performance (PIMP) in an Economic Crisis," World Bank Publications - Reports 10532, The World Bank Group.
    18. McElligott, Rory & O'Brien, Martin, 2011. "Irish Money and Banking Statistics: A New Approach," Quarterly Bulletin Articles, Central Bank of Ireland, pages 107-122, January.
    19. Yabar, J., 2012. "Wait, bond, and buy : Consumer responses to economic crisis," Other publications TiSEM c4298dbe-ef10-433c-91fc-5, Tilburg University, School of Economics and Management.
    20. Djati Wibowo Djamari & Muhammad Idris & Permana Andi Paristiawan & Muhammad Mujtaba Abbas & Olusegun David Samuel & Manzoore Elahi M. Soudagar & Safarudin Gazali Herawan & Davannendran Chandran & Abdu, 2022. "Diesel Spray: Development of Spray in Diesel Engine," Sustainability, MDPI, vol. 14(23), pages 1-22, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:218:y:2021:i:c:s0360544220325810. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.