IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v278y2020ics0306261920312320.html
   My bibliography  Save this article

Analysis and design of inductive wireless power transfer link for feedback-less power delivery to enclosed compartment

Author

Listed:
  • Frechter, Yotam
  • Kuperman, Alon

Abstract

The paper presents analytical investigation and hands-on design of inductive wireless power transfer link for a through-glass AC power delivery system into enclosed compartment such as industrial glove box or vehicle cabin. The system is fed from AC grid and creates a standard AC outlet within the enclosed compartment, capable of supplying loads of up to 1 kW. The system consists of three (namely, AC/DC, DC/DC and DC/AC) conversion stages, with the former and the latter realized by standard off-the-shelf units. The intermediate DC-DC power conversion stage, which is the paper focus, is realized by a from-scratch-built inductive wireless power transfer link, operating in load-independent voltage output regime without any feedback. It was recently shown that the output voltage of such a system, even when operating at load-independent frequency, remains influenced by the load due to practical issues. As a result, the output voltage resides within a certain range rather than remains constant, obtaining minimum/maximum values under rated load/no-load conditions, respectively. Since coils separating glass width typically possesses some finite uncertainty, values of both coupling coefficient and coils self-inductances may be different than nominal (design) ones and hence the output voltage would drift from its nominal range. Hence, due to the fact that upper and lower bounds of an inductive wireless power transfer link output voltage range are limited by DC link capacitor and DC/AC power stage constraints, tolerated glass width uncertainty is obtained in the paper. Moreover, compensating capacitors pair symmetrizing uncertainty tolerance of the inductive wireless power transfer link is also revealed. Simulations and experiments based on 400 V, 1 kW-rated inductive wireless power transfer link are presented to validate the analysis.

Suggested Citation

  • Frechter, Yotam & Kuperman, Alon, 2020. "Analysis and design of inductive wireless power transfer link for feedback-less power delivery to enclosed compartment," Applied Energy, Elsevier, vol. 278(C).
    • Handle: RePEc:eee:appene:v:278:y:2020:i:c:s0306261920312320
    DOI: 10.1016/j.apenergy.2020.115743
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261920312320
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2020.115743?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Villa, Juan Luis & Sallán, Jesús & Llombart, Andrés & Sanz, José Fco, 2009. "Design of a high frequency Inductively Coupled Power Transfer system for electric vehicle battery charge," Applied Energy, Elsevier, vol. 86(3), pages 355-363, March.
    2. Godina, Radu & Rodrigues, Eduardo M.G. & Matias, João C.O. & Catalão, João P.S., 2016. "Smart electric vehicle charging scheduler for overloading prevention of an industry client power distribution transformer," Applied Energy, Elsevier, vol. 178(C), pages 29-42.
    3. Mohamed, Ahmed A.S. & Shaier, Ahmed A. & Metwally, Hamid & Selem, Sameh I., 2020. "A comprehensive overview of inductive pad in electric vehicles stationary charging," Applied Energy, Elsevier, vol. 262(C).
    4. Yagcitekin, Bunyamin & Uzunoglu, Mehmet, 2016. "A double-layer smart charging strategy of electric vehicles taking routing and charge scheduling into account," Applied Energy, Elsevier, vol. 167(C), pages 407-419.
    5. Venugopal, Prasanth & Shekhar, Aditya & Visser, Erwin & Scheele, Natalia & Chandra Mouli, Gautham Ram & Bauer, Pavol & Silvester, Sacha, 2018. "Roadway to self-healing highways with integrated wireless electric vehicle charging and sustainable energy harvesting technologies," Applied Energy, Elsevier, vol. 212(C), pages 1226-1239.
    6. Faraci, Giuseppe & Raciti, Angelo & Rizzo, Santi Agatino & Schembra, Giovanni, 2020. "Green wireless power transfer system for a drone fleet managed by reinforcement learning in smart industry," Applied Energy, Elsevier, vol. 259(C).
    7. Pan, Hongye & Qi, Lingfei & Zhang, Xingtian & Zhang, Zutao & Salman, Waleed & Yuan, Yanping & Wang, Chunbai, 2017. "A portable renewable solar energy-powered cooling system based on wireless power transfer for a vehicle cabin," Applied Energy, Elsevier, vol. 195(C), pages 334-343.
    8. Li, Lantian & Wang, Zhenpo & Gao, Feng & Wang, Shuo & Deng, Junjun, 2020. "A family of compensation topologies for capacitive power transfer converters for wireless electric vehicle charger," Applied Energy, Elsevier, vol. 260(C).
    9. Boukoberine, Mohamed Nadir & Zhou, Zhibin & Benbouzid, Mohamed, 2019. "A critical review on unmanned aerial vehicles power supply and energy management: Solutions, strategies, and prospects," Applied Energy, Elsevier, vol. 255(C).
    10. Joseph, Peter K. & Elangovan, D. & Arunkumar, G., 2019. "Linear control of wireless charging for electric bicycles," Applied Energy, Elsevier, vol. 255(C).
    11. Bi, Zicheng & Kan, Tianze & Mi, Chunting Chris & Zhang, Yiming & Zhao, Zhengming & Keoleian, Gregory A., 2016. "A review of wireless power transfer for electric vehicles: Prospects to enhance sustainable mobility," Applied Energy, Elsevier, vol. 179(C), pages 413-425.
    12. Deng, Junjun & Pang, Bo & Shi, Wenli & Wang, Zhenpo, 2017. "A new integration method with minimized extra coupling effects using inductor and capacitor series-parallel compensation for wireless EV charger," Applied Energy, Elsevier, vol. 207(C), pages 405-416.
    13. Wenig, Jürgen & Sodenkamp, Mariya & Staake, Thorsten, 2019. "Battery versus infrastructure: Tradeoffs between battery capacity and charging infrastructure for plug-in hybrid electric vehicles," Applied Energy, Elsevier, vol. 255(C).
    14. Bi, Zicheng & Keoleian, Gregory A. & Ersal, Tulga, 2018. "Wireless charger deployment for an electric bus network: A multi-objective life cycle optimization," Applied Energy, Elsevier, vol. 225(C), pages 1090-1101.
    15. Majidpour, Mostafa & Qiu, Charlie & Chu, Peter & Pota, Hemanshu R. & Gadh, Rajit, 2016. "Forecasting the EV charging load based on customer profile or station measurement?," Applied Energy, Elsevier, vol. 163(C), pages 134-141.
    16. Bi, Zicheng & Song, Lingjun & De Kleine, Robert & Mi, Chunting Chris & Keoleian, Gregory A., 2015. "Plug-in vs. wireless charging: Life cycle energy and greenhouse gas emissions for an electric bus system," Applied Energy, Elsevier, vol. 146(C), pages 11-19.
    17. Rubino, Luigi & Capasso, Clemente & Veneri, Ottorino, 2017. "Review on plug-in electric vehicle charging architectures integrated with distributed energy sources for sustainable mobility," Applied Energy, Elsevier, vol. 207(C), pages 438-464.
    18. Chen, Feng & Taylor, Nathaniel & Kringos, Nicole, 2015. "Electrification of roads: Opportunities and challenges," Applied Energy, Elsevier, vol. 150(C), pages 109-119.
    19. Andrenacci, N. & Ragona, R. & Valenti, G., 2016. "A demand-side approach to the optimal deployment of electric vehicle charging stations in metropolitan areas," Applied Energy, Elsevier, vol. 182(C), pages 39-46.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Vulfovich, A. & Kolesnik, S. & Baimel, D. & Gutman, M. & Geftler, A. & Kuperman, A., 2022. "Output characteristics modeling and experimental verification of secondary-uncompensated inductive power delivery link operating without feedback," Energy, Elsevier, vol. 252(C).
    2. Darhovsky, Yegal & Mellincovsky, Martin & Baimel, Dmitry & Kuperman, Alon, 2021. "A novel contactless, feedbackless and sensorless power delivery link to electromagnetic levitation melting system residing in sealed compartment," Energy, Elsevier, vol. 231(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Niu, Songyan & Yu, Hang & Niu, Shuangxia & Jian, Linni, 2020. "Power loss analysis and thermal assessment on wireless electric vehicle charging technology: The over-temperature risk of ground assembly needs attention," Applied Energy, Elsevier, vol. 275(C).
    2. Li, Feng & Li, Yanjie & Zhou, Siqi & Chen, Yifang & Sun, Xuan & Deng, Yutong, 2022. "Wireless power transfer tuning model of electric vehicles with pavement materials as transmission media for energy conservation," Applied Energy, Elsevier, vol. 323(C).
    3. Tan, Zhen & Liu, Fan & Chan, Hing Kai & Gao, H. Oliver, 2022. "Transportation systems management considering dynamic wireless charging electric vehicles: Review and prospects," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 163(C).
    4. Amjad, Muhammad & Farooq-i-Azam, Muhammad & Ni, Qiang & Dong, Mianxiong & Ansari, Ejaz Ahmad, 2022. "Wireless charging systems for electric vehicles," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    5. Shi, Jie & Gao, H. Oliver, 2022. "Efficient energy management of wireless charging roads with energy storage for coupled transportation–power systems," Applied Energy, Elsevier, vol. 323(C).
    6. Rubino, Luigi & Capasso, Clemente & Veneri, Ottorino, 2017. "Review on plug-in electric vehicle charging architectures integrated with distributed energy sources for sustainable mobility," Applied Energy, Elsevier, vol. 207(C), pages 438-464.
    7. Soares, Laura & Wang, Hao, 2022. "A study on renewed perspectives of electrified road for wireless power transfer of electric vehicles," Renewable and Sustainable Energy Reviews, Elsevier, vol. 158(C).
    8. Li, Lantian & Wang, Zhenpo & Gao, Feng & Wang, Shuo & Deng, Junjun, 2020. "A family of compensation topologies for capacitive power transfer converters for wireless electric vehicle charger," Applied Energy, Elsevier, vol. 260(C).
    9. Pradeep Vishnuram & Suresh Panchanathan & Narayanamoorthi Rajamanickam & Vijayakumar Krishnasamy & Mohit Bajaj & Marian Piecha & Vojtech Blazek & Lukas Prokop, 2023. "Review of Wireless Charging System: Magnetic Materials, Coil Configurations, Challenges, and Future Perspectives," Energies, MDPI, vol. 16(10), pages 1-31, May.
    10. Gang Chen & Dawei Hu & Steven Chien & Lei Guo & Mingzheng Liu, 2020. "Optimizing Wireless Charging Locations for Battery Electric Bus Transit with a Genetic Algorithm," Sustainability, MDPI, vol. 12(21), pages 1-20, October.
    11. Liu, Zhaocai & Wang, Qichao & Sigler, Devon & Kotz, Andrew & Kelly, Kenneth J. & Lunacek, Monte & Phillips, Caleb & Garikapati, Venu, 2023. "Data-driven simulation-based planning for electric airport shuttle systems: A real-world case study," Applied Energy, Elsevier, vol. 332(C).
    12. Ahmed A. S. Mohamed & Ahmed A. Shaier & Hamid Metwally & Sameh I. Selem, 2022. "An Overview of Dynamic Inductive Charging for Electric Vehicles," Energies, MDPI, vol. 15(15), pages 1-59, August.
    13. Konstantina Anastasiadou & Nikolaos Gavanas & Magda Pitsiava-Latinopoulou & Evangelos Bekiaris, 2021. "Infrastructure Planning for Autonomous Electric Vehicles, Integrating Safety and Sustainability Aspects: A Multi-Criteria Analysis Approach," Energies, MDPI, vol. 14(17), pages 1-19, August.
    14. Deng, Junjun & Pang, Bo & Shi, Wenli & Wang, Zhenpo, 2017. "A new integration method with minimized extra coupling effects using inductor and capacitor series-parallel compensation for wireless EV charger," Applied Energy, Elsevier, vol. 207(C), pages 405-416.
    15. Zhang, Jian & Tang, Tie-Qiao & Yan, Yadan & Qu, Xiaobo, 2021. "Eco-driving control for connected and automated electric vehicles at signalized intersections with wireless charging," Applied Energy, Elsevier, vol. 282(PA).
    16. Mohamed, Ahmed A.S. & Wood, Eric & Meintz, Andrew, 2021. "In-route inductive versus stationary conductive charging for shared automated electric vehicles: A university shuttle service," Applied Energy, Elsevier, vol. 282(PA).
    17. Tohid Harighi & Ramazan Bayindir & Sanjeevikumar Padmanaban & Lucian Mihet-Popa & Eklas Hossain, 2018. "An Overview of Energy Scenarios, Storage Systems and the Infrastructure for Vehicle-to-Grid Technology," Energies, MDPI, vol. 11(8), pages 1-18, August.
    18. Boud Verbrugge & Mohammed Mahedi Hasan & Haaris Rasool & Thomas Geury & Mohamed El Baghdadi & Omar Hegazy, 2021. "Smart Integration of Electric Buses in Cities: A Technological Review," Sustainability, MDPI, vol. 13(21), pages 1-23, November.
    19. Hyukjoon Lee & Dongjin Ji & Dong-Ho Cho, 2019. "Optimal Design of Wireless Charging Electric Bus System Based on Reinforcement Learning," Energies, MDPI, vol. 12(7), pages 1-20, March.
    20. Ying Yang & Zhenpo Wang & Shuo Wang & Ni Lin, 2022. "An Investigation of Opportunity Charging with Hybrid Energy Storage System on Electric Bus with Two-Speed Transmission," Sustainability, MDPI, vol. 14(19), pages 1-13, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:278:y:2020:i:c:s0306261920312320. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.