IDEAS home Printed from https://ideas.repec.org/r/eee/ejores/v94y1996i3p425-438.html
   My bibliography  Save this item

Imperfect maintenance

Citations

Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
as


Cited by:

  1. Jiawen Hu & Zuhua Jiang & Haitao Liao, 2017. "Preventive maintenance of a batch production system under time-varying operational condition," International Journal of Production Research, Taylor & Francis Journals, vol. 55(19), pages 5681-5705, October.
  2. Muller, Alexandre & Suhner, Marie-Christine & Iung, Benoît, 2008. "Formalisation of a new prognosis model for supporting proactive maintenance implementation on industrial system," Reliability Engineering and System Safety, Elsevier, vol. 93(2), pages 234-253.
  3. Richard Arnold & Stefanka Chukova & Yu Hayakawa, 2016. "Failure distributions in multicomponent systems with imperfect repairs," Journal of Risk and Reliability, , vol. 230(1), pages 4-17, February.
  4. Taghipour, Sharareh & Banjevic, Dragan, 2012. "Optimal inspection of a complex system subject to periodic and opportunistic inspections and preventive replacements," European Journal of Operational Research, Elsevier, vol. 220(3), pages 649-660.
  5. Marais, Karen B. & Saleh, Joseph H., 2009. "Beyond its cost, the value of maintenance: An analytical framework for capturing its net present value," Reliability Engineering and System Safety, Elsevier, vol. 94(2), pages 644-657.
  6. Castro, I.T. & Sanjuan, E.L., 2008. "An optimal repair policy for systems with a limited number of repairs," European Journal of Operational Research, Elsevier, vol. 187(1), pages 84-97, May.
  7. Xiang, Yisha, 2013. "Joint optimization of X¯ control chart and preventive maintenance policies: A discrete-time Markov chain approach," European Journal of Operational Research, Elsevier, vol. 229(2), pages 382-390.
  8. Rajiv N Rai & Nomesh Bolia, 2014. "Availability-based optimal maintenance policies for repairable systems in military aviation by identification of dominant failure modes," Journal of Risk and Reliability, , vol. 228(1), pages 52-61, February.
  9. Zhao, Xiujie & He, Shuguang & Xie, Min, 2018. "Utilizing experimental degradation data for warranty cost optimization under imperfect repair," Reliability Engineering and System Safety, Elsevier, vol. 177(C), pages 108-119.
  10. Finkelstein, Maxim, 2015. "On the optimal degree of imperfect repair," Reliability Engineering and System Safety, Elsevier, vol. 138(C), pages 54-58.
  11. Anahita Khojandi & Lisa M. Maillart & Oleg A. Prokopyev & Mark S. Roberts & Samir F. Saba, 2018. "Dynamic Abandon/Extract Decisions for Failed Cardiac Leads," Management Science, INFORMS, vol. 64(2), pages 633-651, February.
  12. Liu, Lujie & Yang, Jun & Kong, Xuefeng & Xiao, Yiyong, 2022. "Multi-mission selective maintenance and repairpersons assignment problem with stochastic durations," Reliability Engineering and System Safety, Elsevier, vol. 219(C).
  13. Liu, Yu & Chen, Yiming & Jiang, Tao, 2020. "Dynamic selective maintenance optimization for multi-state systems over a finite horizon: A deep reinforcement learning approach," European Journal of Operational Research, Elsevier, vol. 283(1), pages 166-181.
  14. Nakagawa, T. & Mizutani, S., 2009. "A summary of maintenance policies for a finite interval," Reliability Engineering and System Safety, Elsevier, vol. 94(1), pages 89-96.
  15. Yeh, Ruey Huei & Lo, Hui-Chiung, 2001. "Optimal preventive-maintenance warranty policy for repairable products," European Journal of Operational Research, Elsevier, vol. 134(1), pages 59-69, October.
  16. Bedford, Tim & Dewan, Isha & Meilijson, Isaac & Zitrou, Athena, 2011. "The signal model: A model for competing risks of opportunistic maintenance," European Journal of Operational Research, Elsevier, vol. 214(3), pages 665-673, November.
  17. Balakrishnan, N. & Kamps, U. & Kateri, M., 2009. "Minimal repair under a step-stress test," Statistics & Probability Letters, Elsevier, vol. 79(13), pages 1548-1558, July.
  18. Izquierdo, J. & Márquez, A. Crespo & Uribetxebarria, J. & Erguido, A., 2020. "On the importance of assessing the operational context impact on maintenance management for life cycle cost of wind energy projects," Renewable Energy, Elsevier, vol. 153(C), pages 1100-1110.
  19. Yi Ding & Anatoly Lisnianski & Ilia Frenkel & Lev Khvatskin, 2009. "Optimal corrective maintenance contract planning for aging multi‐state system," Applied Stochastic Models in Business and Industry, John Wiley & Sons, vol. 25(5), pages 612-631, September.
  20. Wei, Shuaichong & Nourelfath, Mustapha & Nahas, Nabil, 2023. "Analysis of a production line subject to degradation and preventive maintenance," Reliability Engineering and System Safety, Elsevier, vol. 230(C).
  21. Doyen, L., 2012. "Reliability analysis and joint assessment of Brown–Proschan preventive maintenance efficiency and intrinsic wear-out," Computational Statistics & Data Analysis, Elsevier, vol. 56(12), pages 4433-4449.
  22. Flage, Roger, 2014. "A delay time model with imperfect and failure-inducing inspections," Reliability Engineering and System Safety, Elsevier, vol. 124(C), pages 1-12.
  23. Zhao, Jianmin & Chan, A.H.C. & Roberts, C. & Madelin, K.B., 2007. "Reliability evaluation and optimisation of imperfect inspections for a component with multi-defects," Reliability Engineering and System Safety, Elsevier, vol. 92(1), pages 65-73.
  24. Wang, Weikai & Chen, Xian, 2023. "Piecewise deterministic Markov process for condition-based imperfect maintenance models," Reliability Engineering and System Safety, Elsevier, vol. 236(C).
  25. Mitra, Amitava, 2021. "Warranty parameters for extended two-dimensional warranties incorporating consumer preferences," European Journal of Operational Research, Elsevier, vol. 291(2), pages 525-535.
  26. Seyed Habib A. Rahmati & Abbas Ahmadi & Kannan Govindan, 2018. "A novel integrated condition-based maintenance and stochastic flexible job shop scheduling problem: simulation-based optimization approach," Annals of Operations Research, Springer, vol. 269(1), pages 583-621, October.
  27. Richard Arnold & Stefanka Chukova & Yu Hayakawa & Sarah Marshall, 2018. "Warranty Cost Analysis with an Alternating Geometric Process," Papers 1804.06707, arXiv.org.
  28. Xu, Ren-Hong & Lai, Yung-Cheng & Huang, Kwei-Long, 2021. "Decision support models for annual catenary maintenance task identification and assignment," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 152(C).
  29. Taghipour, Sharareh & Banjevic, Dragan & Jardine, Andrew K.S., 2010. "Periodic inspection optimization model for a complex repairable system," Reliability Engineering and System Safety, Elsevier, vol. 95(9), pages 944-952.
  30. Lo, Hui-Chiung & Yu, Rouh-Yun, 2013. "A study of quality management strategy for reused products," Reliability Engineering and System Safety, Elsevier, vol. 119(C), pages 172-177.
  31. Gámiz, María Luz & Limnios, Nikolaos & Segovia-García, María del Carmen, 2023. "Hidden markov models in reliability and maintenance," European Journal of Operational Research, Elsevier, vol. 304(3), pages 1242-1255.
  32. Zhang, Nan & Fouladirad, Mitra & Barros, Anne, 2018. "Optimal imperfect maintenance cost analysis of a two-component system with failure interactions," Reliability Engineering and System Safety, Elsevier, vol. 177(C), pages 24-34.
  33. Dijoux, Yann & Fouladirad, Mitra & Nguyen, Dinh Tuan, 2016. "Statistical inference for imperfect maintenance models with missing data," Reliability Engineering and System Safety, Elsevier, vol. 154(C), pages 84-96.
  34. Nupur Goyal & Vikas Kumar Roy & Mangey Ram, 2022. "Mathematical modelling of embedded systems under network failures," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 13(2), pages 604-614, April.
  35. You, Ming-Yi & Li, Hongguang & Meng, Guang, 2011. "Control-limit preventive maintenance policies for components subject to imperfect preventive maintenance and variable operational conditions," Reliability Engineering and System Safety, Elsevier, vol. 96(5), pages 590-598.
  36. Lu, Biao & Chen, Zhen & Zhao, Xufeng, 2021. "Data-driven dynamic predictive maintenance for a manufacturing system with quality deterioration and online sensors," Reliability Engineering and System Safety, Elsevier, vol. 212(C).
  37. Da Wen & Pan Ershun & Wang Ying & Liao Wenzhu, 2016. "An economic production quantity model for a deteriorating system integrated with predictive maintenance strategy," Journal of Intelligent Manufacturing, Springer, vol. 27(6), pages 1323-1333, December.
  38. Zio, Enrico & Compare, Michele, 2013. "Evaluating maintenance policies by quantitative modeling and analysis," Reliability Engineering and System Safety, Elsevier, vol. 109(C), pages 53-65.
  39. Lin, Zu-Liang & Huang, Yeu-Shiang & Fang, Chih-Chiang, 2015. "Non-periodic preventive maintenance with reliability thresholds for complex repairable systems," Reliability Engineering and System Safety, Elsevier, vol. 136(C), pages 145-156.
  40. Pascual, R. & Meruane, V. & Rey, P.A., 2008. "On the effect of downtime costs and budget constraint on preventive and replacement policies," Reliability Engineering and System Safety, Elsevier, vol. 93(1), pages 144-151.
  41. Guo R. & Ascher H. & Love E., 2001. "Towards Practical and Synthetical Modelling of Repairable Systems," Stochastics and Quality Control, De Gruyter, vol. 16(1), pages 147-182, January.
  42. Chukova, S. & Arnold, R. & Wang, Dong Q., 2004. "Warranty analysis: An approach to modeling imperfect repairs," International Journal of Production Economics, Elsevier, vol. 89(1), pages 57-68, May.
  43. Nguyen, Dinh Tuan & Dijoux, Yann & Fouladirad, Mitra, 2017. "Analytical properties of an imperfect repair model and application in preventive maintenance scheduling," European Journal of Operational Research, Elsevier, vol. 256(2), pages 439-453.
  44. Le, Minh Duc & Tan, Cher Ming, 2013. "Optimal maintenance strategy of deteriorating system under imperfect maintenance and inspection using mixed inspectionscheduling," Reliability Engineering and System Safety, Elsevier, vol. 113(C), pages 21-29.
  45. Shafiee, Mahmood & Chukova, Stefanka, 2013. "Maintenance models in warranty: A literature review," European Journal of Operational Research, Elsevier, vol. 229(3), pages 561-572.
  46. Liu, Yu & Zhang, Qin & Ouyang, Zhiyuan & Huang, Hong-Zhong, 2021. "Integrated production planning and preventive maintenance scheduling for synchronized parallel machines," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
  47. Raouf, BOUCEKKINE & Blanca, MARTINEZ & Cagri, SAGLAM, 2006. "Capital Maintenance Vs Technology Adopton under Embodied Technical Progress," Discussion Papers (ECON - Département des Sciences Economiques) 2006030, Université catholique de Louvain, Département des Sciences Economiques.
  48. Márcio das Chagas Moura & Enrique López Droguett & Paulo Renato Alves Firmino & Ricardo José Ferreira, 2014. "A competing risk model for dependent and imperfect condition–based preventive and corrective maintenances," Journal of Risk and Reliability, , vol. 228(6), pages 590-605, December.
  49. Dewan, Isha & Dijoux, Yann, 2015. "Modelling repairable systems with an early life under competing risks and asymmetric virtual age," Reliability Engineering and System Safety, Elsevier, vol. 144(C), pages 215-224.
  50. Chen, Yiming & Liu, Yu & Jiang, Tao, 2021. "Optimal maintenance strategy for multi-state systems with single maintenance capacity and arbitrarily distributed maintenance time," Reliability Engineering and System Safety, Elsevier, vol. 211(C).
  51. Zhengxin Zhang & Xiaosheng Si & Changhua Hu & Xiangyu Kong, 2015. "Degradation modeling–based remaining useful life estimation: A review on approaches for systems with heterogeneity," Journal of Risk and Reliability, , vol. 229(4), pages 343-355, August.
  52. Richard Arnold & Stefanka Chukova & Yu Hayakawa & Sarah Marshall, 2019. "Warranty cost analysis with an alternating geometric process," Journal of Risk and Reliability, , vol. 233(4), pages 698-715, August.
  53. Liping Liu & Lining Jiang & Ding Zhang, 2017. "An integrated model of statistical process control and condition-based maintenance for deteriorating systems," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 68(11), pages 1452-1460, November.
  54. Pascual, R. & Ortega, J.H., 2006. "Optimal replacement and overhaul decisions with imperfect maintenance and warranty contracts," Reliability Engineering and System Safety, Elsevier, vol. 91(2), pages 241-248.
  55. Alaswad, Suzan & Xiang, Yisha, 2017. "A review on condition-based maintenance optimization models for stochastically deteriorating system," Reliability Engineering and System Safety, Elsevier, vol. 157(C), pages 54-63.
  56. Sedghi, Mahdieh & Kauppila, Osmo & Bergquist, Bjarne & Vanhatalo, Erik & Kulahci, Murat, 2021. "A taxonomy of railway track maintenance planning and scheduling: A review and research trends," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
  57. Yang, Li & Ye, Zhi-sheng & Lee, Chi-Guhn & Yang, Su-fen & Peng, Rui, 2019. "A two-phase preventive maintenance policy considering imperfect repair and postponed replacement," European Journal of Operational Research, Elsevier, vol. 274(3), pages 966-977.
  58. C. Drent & S. Kapodistria & J. A. C. Resing, 2019. "Condition-based maintenance policies under imperfect maintenance at scheduled and unscheduled opportunities," Queueing Systems: Theory and Applications, Springer, vol. 93(3), pages 269-308, December.
  59. Dai, Anshu & Wang, Xin & Li, Yu & Li, Ting & He, Shuguang, 2023. "Design of a performance-based warranty policy with replacement–repair strategy and cumulative cost threshold," International Journal of Production Economics, Elsevier, vol. 255(C).
  60. Sarang Deo & Seyed Iravani & Tingting Jiang & Karen Smilowitz & Stephen Samuelson, 2013. "Improving Health Outcomes Through Better Capacity Allocation in a Community-Based Chronic Care Model," Operations Research, INFORMS, vol. 61(6), pages 1277-1294, December.
  61. Gouiaa-Mtibaa, A. & Dellagi, S. & Achour, Z. & Erray, W., 2018. "Integrated Maintenance-Quality policy with rework process under improved imperfect preventive maintenance," Reliability Engineering and System Safety, Elsevier, vol. 173(C), pages 1-11.
  62. Aghezzaf, El-Houssaine & Khatab, Abdelhakim & Tam, Phuoc Le, 2016. "Optimizing production and imperfect preventive maintenance planning׳s integration in failure-prone manufacturing systems," Reliability Engineering and System Safety, Elsevier, vol. 145(C), pages 190-198.
  63. Kenné, Jean-Pierre & Gharbi, Ali, 2018. "Production and replacement policies for a deteriorating manufacturing system under random demand and qualityAuthor-Name: Ouaret, Samir," European Journal of Operational Research, Elsevier, vol. 264(2), pages 623-636.
  64. Van Horenbeek, Adriaan & Pintelon, Liliane, 2013. "A dynamic predictive maintenance policy for complex multi-component systems," Reliability Engineering and System Safety, Elsevier, vol. 120(C), pages 39-50.
  65. Nguyen, Kim-Anh & Do, Phuc & Grall, Antoine, 2015. "Multi-level predictive maintenance for multi-component systems," Reliability Engineering and System Safety, Elsevier, vol. 144(C), pages 83-94.
  66. Tanwar, Monika & Rai, Rajiv N. & Bolia, Nomesh, 2014. "Imperfect repair modeling using Kijima type generalized renewal process," Reliability Engineering and System Safety, Elsevier, vol. 124(C), pages 24-31.
  67. Ruey Yeh & Wen Chang & Hui-Chiung Lo, 2010. "Optimal threshold values of age and two-phase maintenance policy for leased equipments using age reduction method," Annals of Operations Research, Springer, vol. 181(1), pages 171-183, December.
  68. Wu, Jun & Xie, Min & Adam Ng, Tsan Sheng, 2011. "On a general periodic preventive maintenance policy incorporating warranty contracts and system ageing losses," International Journal of Production Economics, Elsevier, vol. 129(1), pages 102-110, January.
  69. Ajith Tom James & O. P. Gandhi & S. G. Deshmukh, 2017. "Assessment of failures in automobiles due to maintenance errors," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 8(4), pages 719-739, December.
  70. Xia, Tangbin & Xi, Lifeng & Zhou, Xiaojun & Lee, Jay, 2012. "Dynamic maintenance decision-making for series–parallel manufacturing system based on MAM–MTW methodology," European Journal of Operational Research, Elsevier, vol. 221(1), pages 231-240.
  71. Xiaolin Wang & Wei Xie, 2018. "Two-dimensional warranty: A literature review," Journal of Risk and Reliability, , vol. 232(3), pages 284-307, June.
  72. Chien, Yu-Hung & Sheu, Shey-Huei & Zhang, Zhe George, 2012. "Optimal maintenance policy for a system subject to damage in a discrete time process," Reliability Engineering and System Safety, Elsevier, vol. 103(C), pages 1-10.
  73. Kowalski, Marcin & Magott, Jan & Nowakowski, Tomasz & Werbińska-Wojciechowska, Sylwia, 2014. "Exact and approximation methods for dependability assessment of tram systems with time window," European Journal of Operational Research, Elsevier, vol. 235(3), pages 671-686.
  74. Jiawen Hu & Zuhua Jiang & Hong Wang, 2016. "Preventive maintenance for a single-machine system under variable operational conditions," Journal of Risk and Reliability, , vol. 230(4), pages 391-404, August.
  75. Sergey S. Ketkov & Oleg A. Prokopyev & Lisa M. Maillart, 2023. "Planning of life-depleting preventive maintenance activities with replacements," Annals of Operations Research, Springer, vol. 324(1), pages 1461-1483, May.
  76. Shen, Jingyuan & Cui, Lirong & Ma, Yizhong, 2019. "Availability and optimal maintenance policy for systems degrading in dynamic environments," European Journal of Operational Research, Elsevier, vol. 276(1), pages 133-143.
  77. Erguido, A. & Crespo Márquez, A. & Castellano, E. & Gómez Fernández, J.F., 2017. "A dynamic opportunistic maintenance model to maximize energy-based availability while reducing the life cycle cost of wind farms," Renewable Energy, Elsevier, vol. 114(PB), pages 843-856.
  78. Daneshkhah, A. & Stocks, N.G. & Jeffrey, P., 2017. "Probabilistic sensitivity analysis of optimised preventive maintenance strategies for deteriorating infrastructure assets," Reliability Engineering and System Safety, Elsevier, vol. 163(C), pages 33-45.
  79. Ait Mokhtar, El Hassene & Laggoune, Radouane & Chateauneuf, Alaa, 2023. "Imperfect maintenance modeling and assessment of repairable multi-component systems," Reliability Engineering and System Safety, Elsevier, vol. 234(C).
  80. Nobuyuki Tamura, 2018. "Optimal control of production with improvement," Journal of Risk and Reliability, , vol. 232(6), pages 777-785, December.
  81. Xiao, Lei & Zhang, Xinghui & Tang, Junxuan & Zhou, Yaqin, 2020. "Joint optimization of opportunistic maintenance and production scheduling considering batch production mode and varying operational conditions," Reliability Engineering and System Safety, Elsevier, vol. 202(C).
  82. Thiago Lima de Barros & Rodrigo Sampaio Lopes, 2021. "Continuous improvement of imperfect maintenance actions in PAS and PAR models," Journal of Risk and Reliability, , vol. 235(5), pages 941-958, October.
  83. Jackson, Canek & Pascual, Rodrigo, 2008. "Optimal maintenance service contract negotiation with aging equipment," European Journal of Operational Research, Elsevier, vol. 189(2), pages 387-398, September.
  84. Aktekin, Tevfik & Caglar, Toros, 2013. "Imperfect debugging in software reliability: A Bayesian approach," European Journal of Operational Research, Elsevier, vol. 227(1), pages 112-121.
  85. Bai, Jun & Pham, Hoang, 2006. "Cost analysis on renewable full-service warranties for multi-component systems," European Journal of Operational Research, Elsevier, vol. 168(2), pages 492-508, January.
  86. Junyuan Wang & Jimin Ye & Liang Wang, 2022. "Extended age maintenance models and its optimization for series and parallel systems," Annals of Operations Research, Springer, vol. 312(1), pages 495-517, May.
  87. Nguyen, Van-Thai & Do, Phuc & Vosin, Alexandre & Iung, Benoit, 2022. "Artificial-intelligence-based maintenance decision-making and optimization for multi-state component systems," Reliability Engineering and System Safety, Elsevier, vol. 228(C).
  88. Liu, Bin & Wu, Shaomin & Xie, Min & Kuo, Way, 2017. "A condition-based maintenance policy for degrading systems with age- and state-dependent operating cost," European Journal of Operational Research, Elsevier, vol. 263(3), pages 879-887.
  89. Bartholomew-Biggs, Michael & Zuo, Ming J. & Li, Xiaohu, 2009. "Modelling and optimizing sequential imperfect preventive maintenance," Reliability Engineering and System Safety, Elsevier, vol. 94(1), pages 53-62.
  90. Lu, Biao & Zhou, Xiaojun, 2017. "Opportunistic preventive maintenance scheduling for serial-parallel multistage manufacturing systems with multiple streams of deterioration," Reliability Engineering and System Safety, Elsevier, vol. 168(C), pages 116-127.
  91. Huynh, K.T., 2021. "An adaptive predictive maintenance model for repairable deteriorating systems using inverse Gaussian degradation process," Reliability Engineering and System Safety, Elsevier, vol. 213(C).
  92. Nguyen, Kim-Anh & Do, Phuc & Grall, Antoine, 2017. "Joint predictive maintenance and inventory strategy for multi-component systems using Birnbaum’s structural importance," Reliability Engineering and System Safety, Elsevier, vol. 168(C), pages 249-261.
  93. Aseem K. Mishra & Divya Shrivastava & Prem Vrat, 2020. "An opportunistic group maintenance model for the multi-unit series system employing Jaya algorithm," OPSEARCH, Springer;Operational Research Society of India, vol. 57(2), pages 603-628, June.
  94. Compare, Michele & Baraldi, Piero & Marelli, Paolo & Zio, Enrico, 2020. "Partially observable Markov decision processes for optimal operations of gas transmission networks," Reliability Engineering and System Safety, Elsevier, vol. 199(C).
  95. Wang, Hongzhou & Pham, Hoang, 2006. "Availability and maintenance of series systems subject to imperfect repair and correlated failure and repair," European Journal of Operational Research, Elsevier, vol. 174(3), pages 1706-1722, November.
  96. Liu, Peng & Wang, Guanjun, 2023. "Generalized non-renewing replacement warranty policy and an age-based post-warranty maintenance strategy," European Journal of Operational Research, Elsevier, vol. 311(2), pages 567-580.
  97. Toon Vanderschueren & Robert Boute & Tim Verdonck & Bart Baesens & Wouter Verbeke, 2022. "Prescriptive maintenance with causal machine learning," Papers 2206.01562, arXiv.org.
  98. Jiang, Tao & Liu, Yu, 2020. "Selective maintenance strategy for systems executing multiple consecutive missions with uncertainty," Reliability Engineering and System Safety, Elsevier, vol. 193(C).
  99. S El-Ferik & M Ben-Daya, 2008. "Model for imperfect age-based preventive maintenance with age reduction," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 59(12), pages 1644-1651, December.
  100. Hu, Jiawen & Jiang, Zuhua & Liao, Haitao, 2017. "Preventive maintenance of a single machine system working under piecewise constant operating condition," Reliability Engineering and System Safety, Elsevier, vol. 168(C), pages 105-115.
  101. Haitao Liao, 2009. "Optimal design of accelerated life testing plans for periodical replacement with penalty," Naval Research Logistics (NRL), John Wiley & Sons, vol. 56(1), pages 19-32, February.
  102. Ruey Yeh & Cheng-Kang Chen, 2006. "Periodical Preventive-Maintenance Contract for a Leased Facility with Weibull Life-Time," Quality & Quantity: International Journal of Methodology, Springer, vol. 40(2), pages 303-313, April.
  103. Liao, Gwo-Liang & Chen, Yen Hung & Sheu, Shey-Huei, 2009. "Optimal economic production quantity policy for imperfect process with imperfect repair and maintenance," European Journal of Operational Research, Elsevier, vol. 195(2), pages 348-357, June.
  104. Yen-Luan Chen & Chin-Chih Chang & Dwan-Fang Sheu, 2016. "Optimum random and age replacement policies for customer-demand multi-state system reliability under imperfect maintenance," International Journal of Systems Science, Taylor & Francis Journals, vol. 47(5), pages 1130-1141, April.
  105. Joanni, A. & Rackwitz, R., 2008. "Cost–benefit optimization for maintained structures by a renewal model," Reliability Engineering and System Safety, Elsevier, vol. 93(3), pages 489-499.
  106. Aven, Terje & Castro, I.T., 2008. "A minimal repair replacement model with two types of failure and a safety constraint," European Journal of Operational Research, Elsevier, vol. 188(2), pages 506-515, July.
  107. Bebbington, Mark & Lai, Chin-Diew & Zitikis, RiÄ ardas, 2009. "Balancing burn-in and mission times in environments with catastrophic and repairable failures," Reliability Engineering and System Safety, Elsevier, vol. 94(8), pages 1314-1321.
  108. Sun, Yong & Ma, Lin & Morris, Jon, 2009. "A practical approach for reliability prediction of pipeline systems," European Journal of Operational Research, Elsevier, vol. 198(1), pages 210-214, October.
  109. Liu, Xingheng & Vatn, Jørn & Dijoux, Yann & Toftaker, Håkon, 2020. "Unobserved heterogeneity in stable imperfect repair models," Reliability Engineering and System Safety, Elsevier, vol. 203(C).
  110. Do, Phuc & Voisin, Alexandre & Levrat, Eric & Iung, Benoit, 2015. "A proactive condition-based maintenance strategy with both perfect and imperfect maintenance actions," Reliability Engineering and System Safety, Elsevier, vol. 133(C), pages 22-32.
  111. Liao, Haitao & Elsayed, Elsayed A. & Chan, Ling-Yau, 2006. "Maintenance of continuously monitored degrading systems," European Journal of Operational Research, Elsevier, vol. 175(2), pages 821-835, December.
  112. Wu, Shaomin & Clements-Croome, Derek, 2005. "Preventive maintenance models with random maintenance quality," Reliability Engineering and System Safety, Elsevier, vol. 90(1), pages 99-105.
  113. Heggland, Knut & Lindqvist, Bo H., 2007. "A non-parametric monotone maximum likelihood estimator of time trend for repairable system data," Reliability Engineering and System Safety, Elsevier, vol. 92(5), pages 575-584.
  114. Huang, Yeu-Shiang & Gau, Wei-Yo & Ho, Jyh-Wen, 2015. "Cost analysis of two-dimensional warranty for products with periodic preventive maintenance," Reliability Engineering and System Safety, Elsevier, vol. 134(C), pages 51-58.
  115. Medina-Oliva, G. & Weber, P. & Iung, B., 2013. "PRM-based patterns for knowledge formalisation of industrial systems to support maintenance strategies assessment," Reliability Engineering and System Safety, Elsevier, vol. 116(C), pages 38-56.
  116. Zhou, Xiaojun & Xi, Lifeng & Lee, Jay, 2007. "Reliability-centered predictive maintenance scheduling for a continuously monitored system subject to degradation," Reliability Engineering and System Safety, Elsevier, vol. 92(4), pages 530-534.
  117. Badía, F.G. & Berrade, M.D. & Cha, Ji Hwan & Lee, Hyunju, 2018. "Optimal replacement policy under a general failure and repair model: Minimal versus worse than old repair," Reliability Engineering and System Safety, Elsevier, vol. 180(C), pages 362-372.
  118. Marais, Karen B., 2013. "Value maximizing maintenance policies under general repair," Reliability Engineering and System Safety, Elsevier, vol. 119(C), pages 76-87.
  119. Aguilera, José Joaquín & Meesenburg, Wiebke & Ommen, Torben & Markussen, Wiebke Brix & Poulsen, Jonas Lundsted & Zühlsdorf, Benjamin & Elmegaard, Brian, 2022. "A review of common faults in large-scale heat pumps," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
  120. Laurent Doyen, 2010. "Asymptotic properties of imperfect repair models and estimation of repair efficiency," Naval Research Logistics (NRL), John Wiley & Sons, vol. 57(3), pages 296-307, April.
  121. Liao, Gwo-Liang & Sheu, Shey-Huei, 2011. "Economic production quantity model for randomly failing production process with minimal repair and imperfect maintenance," International Journal of Production Economics, Elsevier, vol. 130(1), pages 118-124, March.
  122. Chaabane, K. & Khatab, A. & Diallo, C. & Aghezzaf, E.-H. & Venkatadri, U., 2020. "Integrated imperfect multimission selective maintenance and repairpersons assignment problem," Reliability Engineering and System Safety, Elsevier, vol. 199(C).
  123. Wang, Naichao & Hu, Jiawen & Ma, Lin & Xiao, Boping & Liao, Haitao, 2020. "Availability Analysis and Preventive Maintenance Planning for Systems with General Time Distributions," Reliability Engineering and System Safety, Elsevier, vol. 201(C).
  124. Nourelfath, Mustapha & Nahas, Nabil & Ben-Daya, Mohamed, 2016. "Integrated preventive maintenance and production decisions for imperfect processes," Reliability Engineering and System Safety, Elsevier, vol. 148(C), pages 21-31.
  125. Maxim Finkelstein & Gregory Levitin & Oleg A Stepanov, 2019. "On operation termination for degrading systems with two types of failures," Journal of Risk and Reliability, , vol. 233(3), pages 419-426, June.
  126. Wang, Hongzhou, 2002. "A survey of maintenance policies of deteriorating systems," European Journal of Operational Research, Elsevier, vol. 139(3), pages 469-489, June.
  127. Fakher, Hossein Beheshti & Nourelfath, Mustapha & Gendreau, Michel, 2018. "Integrating production, maintenance and quality: A multi-period multi-product profit-maximization model," Reliability Engineering and System Safety, Elsevier, vol. 170(C), pages 191-201.
  128. Maxim Finkelstein & Ji Hwan Cha, 2021. "Virtual age, is it real? ‐ Discussing virtual age in reliability context," Applied Stochastic Models in Business and Industry, John Wiley & Sons, vol. 37(1), pages 3-16, January.
  129. Rivera-Gómez, Héctor & Gharbi, Ali & Kenné, Jean Pierre, 2013. "Joint production and major maintenance planning policy of a manufacturing system with deteriorating quality," International Journal of Production Economics, Elsevier, vol. 146(2), pages 575-587.
  130. Gan, Shuyuan & Hu, Hengheng & Coit, David W., 2023. "Maintenance optimization considering the mutual dependence of the environment and system with decreasing effects of imperfect maintenance," Reliability Engineering and System Safety, Elsevier, vol. 235(C).
  131. David T. Abdul‐Malak & Jeffrey P. Kharoufeh & Lisa M. Maillart, 2019. "Maintaining systems with heterogeneous spare parts," Naval Research Logistics (NRL), John Wiley & Sons, vol. 66(6), pages 485-501, September.
  132. Francesco Corman & Sander Kraijema & Milinko Godjevac & Gabriel Lodewijks, 2017. "Optimizing preventive maintenance policy: A data-driven application for a light rail braking system," Journal of Risk and Reliability, , vol. 231(5), pages 534-545, October.
  133. Chien, Yu-Hung & Zhang, Zhe George & Yin, Xiaoling, 2019. "On optimal preventive-maintenance policy for generalized Polya process repairable products under free-repair warranty," European Journal of Operational Research, Elsevier, vol. 279(1), pages 68-78.
  134. Wang, Ling & Xu, Hong & Yuan, Hua & Zhao, Wenjie & Chen, Xiai, 2015. "Optimizing the re-profiling strategy of metro wheels based on a data-driven wear model," European Journal of Operational Research, Elsevier, vol. 242(3), pages 975-986.
  135. Rao P. Naga Srinivasa & Naikan V. N. Achutha, 2006. "An Optimization Methodology for Condition Based Minimal and Major Preventive Maintenance," Stochastics and Quality Control, De Gruyter, vol. 21(1), pages 127-141, January.
  136. Chaoqun Duan & Chao Deng & Bingran Wang, 2019. "Multi-phase sequential preventive maintenance scheduling for deteriorating repairable systems," Journal of Intelligent Manufacturing, Springer, vol. 30(4), pages 1779-1793, April.
  137. Zitrou, A. & Bedford, T. & Daneshkhah, A., 2013. "Robustness of maintenance decisions: Uncertainty modelling and value of information," Reliability Engineering and System Safety, Elsevier, vol. 120(C), pages 60-71.
  138. Wang, Jinting & Zhou, Zhuang & Peng, Hao, 2017. "Flexible decision models for a two-dimensional warranty policy with periodic preventive maintenance," Reliability Engineering and System Safety, Elsevier, vol. 162(C), pages 14-27.
  139. Sheu, Shey-Huei & Lin, Yuh-Bin & Liao, Gwo-Liang, 2006. "Optimum policies for a system with general imperfect maintenance," Reliability Engineering and System Safety, Elsevier, vol. 91(3), pages 362-369.
  140. Liu, Xingheng & Finkelstein, Maxim & Vatn, Jørn & Dijoux, Yann, 2020. "Steady-state imperfect repair models," European Journal of Operational Research, Elsevier, vol. 286(2), pages 538-546.
  141. Aseem K. Mishra & Divya Shrivastava & Devesh Tarasia & Abdur Rahim, 2022. "Joint optimization of production scheduling and group preventive maintenance planning in multi-machine systems," Annals of Operations Research, Springer, vol. 316(1), pages 401-444, September.
  142. Belyi, Dmitriy & Popova, Elmira & Morton, David P. & Damien, Paul, 2017. "Bayesian failure-rate modeling and preventive maintenance optimization," European Journal of Operational Research, Elsevier, vol. 262(3), pages 1085-1093.
  143. Kurt, Murat & Kharoufeh, Jeffrey P., 2010. "Optimally maintaining a Markovian deteriorating system with limited imperfect repairs," European Journal of Operational Research, Elsevier, vol. 205(2), pages 368-380, September.
  144. Remy, Emmanuel & Corset, Franck & Despréaux, Stéphane & Doyen, Laurent & Gaudoin, Olivier, 2013. "An example of integrated approach to technical and economic optimization of maintenance," Reliability Engineering and System Safety, Elsevier, vol. 116(C), pages 8-19.
  145. Hoang Pham & Hongzhou Wang, 2000. "Optimal (τ, T) opportunistic maintenance of a k‐out‐of‐n:G system with imperfect PM and partial failure," Naval Research Logistics (NRL), John Wiley & Sons, vol. 47(3), pages 223-239, April.
  146. Maxim Finkelstein & Mahmood Shafiee, 2017. "Preventive maintenance for systems with repairable minor failures," Journal of Risk and Reliability, , vol. 231(2), pages 101-108, April.
  147. Doyen, L., 2014. "Semi-parametric estimation of Brown–Proschan preventive maintenance effects and intrinsic wear-out," Computational Statistics & Data Analysis, Elsevier, vol. 77(C), pages 206-222.
  148. Olivencia Polo, Fernando A. & Ferrero Bermejo, Jesús & Gómez Fernández, Juan F. & Crespo Márquez, Adolfo, 2015. "Failure mode prediction and energy forecasting of PV plants to assist dynamic maintenance tasks by ANN based models," Renewable Energy, Elsevier, vol. 81(C), pages 227-238.
  149. Liu, Qiannan & Ma, Lin & Wang, Naichao & Chen, Ankang & Jiang, Qihang, 2022. "A condition-based maintenance model considering multiple maintenance effects on the dependent failure processes," Reliability Engineering and System Safety, Elsevier, vol. 220(C).
  150. Vanderschueren, Toon & Boute, Robert & Verdonck, Tim & Baesens, Bart & Verbeke, Wouter, 2023. "Optimizing the preventive maintenance frequency with causal machine learning," International Journal of Production Economics, Elsevier, vol. 258(C).
  151. Ming-Yi You & Guang Meng, 2012. "A modularized framework for predictive maintenance scheduling," Journal of Risk and Reliability, , vol. 226(4), pages 380-391, August.
  152. Wang, Ling & Chu, Jian & Mao, Weijie, 2009. "A condition-based replacement and spare provisioning policy for deteriorating systems with uncertain deterioration to failure," European Journal of Operational Research, Elsevier, vol. 194(1), pages 184-205, April.
  153. XiaoFei, Lu & Min, Liu, 2014. "Hazard rate function in dynamic environment," Reliability Engineering and System Safety, Elsevier, vol. 130(C), pages 50-60.
  154. Zhang, Fengxia & Shen, Jingyuan & Ma, Yizhong, 2020. "Optimal maintenance policy considering imperfect repairs and non-constant probabilities of inspection errors," Reliability Engineering and System Safety, Elsevier, vol. 193(C).
  155. Khac Tuan Huynh & Antoine Grall, 2020. "A condition-based maintenance model with past-dependent imperfect preventive repairs for continuously deteriorating systems," Journal of Risk and Reliability, , vol. 234(2), pages 333-358, April.
  156. Xia, Tangbin & Jin, Xiaoning & Xi, Lifeng & Ni, Jun, 2015. "Production-driven opportunistic maintenance for batch production based on MAM–APB scheduling," European Journal of Operational Research, Elsevier, vol. 240(3), pages 781-790.
  157. El-Ferik, Sami, 2008. "Economic production lot-sizing for an unreliable machine under imperfect age-based maintenance policy," European Journal of Operational Research, Elsevier, vol. 186(1), pages 150-163, April.
  158. Ben-Daya, Mohamed, 2002. "The economic production lot-sizing problem with imperfect production processes and imperfect maintenance," International Journal of Production Economics, Elsevier, vol. 76(3), pages 257-264, April.
  159. Zhou, Kai-Li & Cheng, De-Jun & Zhang, Han-Bing & Hu, Zhong-tai & Zhang, Chun-Yan, 2023. "Deep learning-based intelligent multilevel predictive maintenance framework considering comprehensive cost," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
  160. Herzog, M.A. & Marwala, T. & Heyns, P.S., 2009. "Machine and component residual life estimation through the application of neural networks," Reliability Engineering and System Safety, Elsevier, vol. 94(2), pages 479-489.
  161. Hamdan, K. & Tavangar, M. & Asadi, M., 2021. "Optimal preventive maintenance for repairable weighted k-out-of-n systems," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
  162. Van Horenbeek, Adriaan & Buré, Jasmine & Cattrysse, Dirk & Pintelon, Liliane & Vansteenwegen, Pieter, 2013. "Joint maintenance and inventory optimization systems: A review," International Journal of Production Economics, Elsevier, vol. 143(2), pages 499-508.
  163. Yeo, Wee Meng & Yuan, Xue-Ming, 2009. "Optimal warranty policies for systems with imperfect repair," European Journal of Operational Research, Elsevier, vol. 199(1), pages 187-197, November.
IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.