IDEAS home Printed from https://ideas.repec.org/a/spr/annopr/v331y2023i1d10.1007_s10479-023-05472-6.html
   My bibliography  Save this article

Smart manufacturing as a strategic tool to mitigate sustainable manufacturing challenges: a case approach

Author

Listed:
  • Devika Kannan

    (University of Southern Denmark
    Woxsen University)

  • Parvaneh Gholipour

    (Islamic Azad University)

  • Chunguang Bai

    (University of Electronic Science and Technology of China)

Abstract

Due to the manufacturing sector’s severe negative impacts on sustainable development, sustainable manufacturing is gaining more momentum than ever. Despite the advantages of sustainable manufacturing, academic literature resources report that practitioners still face several challenges while implementing sustainable manufacturing. To eliminate such challenges, numerous mitigation strategies have been proposed, including those that identify Industry 4.0 technologies as a key factor. However, current studies are generally more focused on the application of Industry 4.0 technologies/smart manufacturing in sustainable manufacturing; most fail to provide an in-depth understanding of how these technologies might mitigate the existing adoption challenges of sustainable manufacturing. In this study, the key challenges of sustainable manufacturing are identified through literature review and analyzed with MCDM tools such as the Best-Worst Method and WASPAS method. The results suggest that governmental challenge demonstrates the greatest weight in the final ranking, followed by technological and organizational challenges. Among the sub-challenges, “lack of support from the government in the form of regulations / policies” and “absence of subsidies and incentives” display the most weight. Further, a framework has been proposed to map the collected challenges with relevant mitigating smart manufacturing technologies to bridge the gap remaining from existing studies. Finally, this study contributes to the new field of approaching smart manufacturing as a mitigating strategy for sustainable manufacturing implementation through highlighting the implications and recommendations.

Suggested Citation

  • Devika Kannan & Parvaneh Gholipour & Chunguang Bai, 2023. "Smart manufacturing as a strategic tool to mitigate sustainable manufacturing challenges: a case approach," Annals of Operations Research, Springer, vol. 331(1), pages 543-579, December.
    • Handle: RePEc:spr:annopr:v:331:y:2023:i:1:d:10.1007_s10479-023-05472-6
    DOI: 10.1007/s10479-023-05472-6
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s10479-023-05472-6
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s10479-023-05472-6?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Aitor Ardanza & Aitor Moreno & Álvaro Segura & Mikel de la Cruz & Daniel Aguinaga, 2019. "Sustainable and flexible industrial human machine interfaces to support adaptable applications in the Industry 4.0 paradigm," International Journal of Production Research, Taylor & Francis Journals, vol. 57(12), pages 4045-4059, June.
    2. Priyanka Pathak & M.P. Singh & Gaurav Kumar Badhotiya, 2020. "Performance obstacles in sustainable manufacturing – model building and validation," Journal of Advances in Management Research, Emerald Group Publishing Limited, vol. 17(4), pages 549-566, June.
    3. Tan Ching Ng & Sie Yee Lau & Morteza Ghobakhloo & Masood Fathi & Meng Suan Liang, 2022. "The Application of Industry 4.0 Technological Constituents for Sustainable Manufacturing: A Content-Centric Review," Sustainability, MDPI, vol. 14(7), pages 1-21, April.
    4. Kannan Govindan, 2022. "Tunneling the barriers of blockchain technology in remanufacturing for achieving sustainable development goals: A circular manufacturing perspective," Business Strategy and the Environment, Wiley Blackwell, vol. 31(8), pages 3769-3785, December.
    5. Foivos Psarommatis & João Sousa & João Pedro Mendonça & Dimitris Kiritsis, 2022. "Zero-defect manufacturing the approach for higher manufacturing sustainability in the era of industry 4.0: a position paper," International Journal of Production Research, Taylor & Francis Journals, vol. 60(1), pages 73-91, January.
    6. Sang-Hyun Park & Kang-Hee Lee & Ji-Su Park & Youn-Soon Shin, 2022. "Deep Learning-Based Defect Detection for Sustainable Smart Manufacturing," Sustainability, MDPI, vol. 14(5), pages 1-15, February.
    7. Marco Ardolino & Mario Rapaccini & Nicola Saccani & Paolo Gaiardelli & Giovanni Crespi & Carlo Ruggeri, 2018. "The role of digital technologies for the service transformation of industrial companies," International Journal of Production Research, Taylor & Francis Journals, vol. 56(6), pages 2116-2132, March.
    8. Malek, Javed & Desai, Tushar N., 2022. "Investigating the role of sustainable manufacturing adoption in improving the organizational performance," Technology in Society, Elsevier, vol. 68(C).
    9. Liu, Jian & Yang, Qingshan & Ou, Suhua & Liu, Jie, 2022. "Factor decomposition and the decoupling effect of carbon emissions in China's manufacturing high-emission subsectors," Energy, Elsevier, vol. 248(C).
    10. Zeki Murat Çınar & Abubakar Abdussalam Nuhu & Qasim Zeeshan & Orhan Korhan & Mohammed Asmael & Babak Safaei, 2020. "Machine Learning in Predictive Maintenance towards Sustainable Smart Manufacturing in Industry 4.0," Sustainability, MDPI, vol. 12(19), pages 1-42, October.
    11. Maria Holgado & Marco Macchi & Stephen Evans, 2020. "Exploring the impacts and contributions of maintenance function for sustainable manufacturing," International Journal of Production Research, Taylor & Francis Journals, vol. 58(23), pages 7292-7310, December.
    12. Ali Bastas, 2021. "Sustainable Manufacturing Technologies: A Systematic Review of Latest Trends and Themes," Sustainability, MDPI, vol. 13(8), pages 1-22, April.
    13. Hazem Ali & Ting Chen & Yunhong Hao, 2021. "Sustainable Manufacturing Practices, Competitive Capabilities, and Sustainable Performance: Moderating Role of Environmental Regulations," Sustainability, MDPI, vol. 13(18), pages 1-19, September.
    14. Mohamed Abubakr & Adel T. Abbas & Italo Tomaz & Mahmoud S. Soliman & Monis Luqman & Hussien Hegab, 2020. "Sustainable and Smart Manufacturing: An Integrated Approach," Sustainability, MDPI, vol. 12(6), pages 1-19, March.
    15. Gianmarco Bressanelli & Federico Adrodegari & Marco Perona & Nicola Saccani, 2018. "Exploring How Usage-Focused Business Models Enable Circular Economy through Digital Technologies," Sustainability, MDPI, vol. 10(3), pages 1-21, February.
    16. Edmundas Kazimieras Zavadskas & Povilas Vainiūnas & Zenonas Turskis & Jolanta Tamošaitienė, 2012. "Multiple Criteria Decision Support System For Assessment Of Projects Managers In Construction," International Journal of Information Technology & Decision Making (IJITDM), World Scientific Publishing Co. Pte. Ltd., vol. 11(02), pages 501-520.
    17. Mustufa Haider Abidi & Muneer Khan Mohammed & Hisham Alkhalefah, 2022. "Predictive Maintenance Planning for Industry 4.0 Using Machine Learning for Sustainable Manufacturing," Sustainability, MDPI, vol. 14(6), pages 1-27, March.
    18. Priyanka Pathak & M.P. Singh & Gaurav Kumar Badhotiya, 2020. "Performance obstacles in sustainable manufacturing – model building and validation," Journal of Advances in Management Research, Emerald Group Publishing Limited, vol. 17(4), pages 549-566, June.
    19. Carla Gonçalves Machado & Mats Peter Winroth & Elias Hans Dener Ribeiro da Silva, 2020. "Sustainable manufacturing in Industry 4.0: an emerging research agenda," International Journal of Production Research, Taylor & Francis Journals, vol. 58(5), pages 1462-1484, March.
    20. Claudia Lood Alayón & Kristina Säfsten & Glenn Johansson, 2022. "Barriers and Enablers for the Adoption of Sustainable Manufacturing by Manufacturing SMEs," Sustainability, MDPI, vol. 14(4), pages 1-34, February.
    21. Rezaei, Jafar, 2016. "Best-worst multi-criteria decision-making method: Some properties and a linear model," Omega, Elsevier, vol. 64(C), pages 126-130.
    22. Rezaei, Jafar, 2015. "Best-worst multi-criteria decision-making method," Omega, Elsevier, vol. 53(C), pages 49-57.
    23. Govindan, Kannan & Salehian, Farhad & Kian, Hadi & Hosseini, Seyed Teimoor & Mina, Hassan, 2023. "A location-inventory-routing problem to design a circular closed-loop supply chain network with carbon tax policy for achieving circular economy: An augmented epsilon-constraint approach," International Journal of Production Economics, Elsevier, vol. 257(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yongbo Li & Murugesan Palaniappan & Naser Alsaleh & D. Thresh Kumar & Abdullah A. Elfar & Mark Christhian Barrueta Pinto & Adriana Montenegro Torres, 2025. "Decision analysis on sustainable manufacturing practices: cross country perspective," Annals of Operations Research, Springer, vol. 345(1), pages 277-315, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Joma Aldrini & Ines Chihi & Lilia Sidhom, 2024. "Fault diagnosis and self-healing for smart manufacturing: a review," Journal of Intelligent Manufacturing, Springer, vol. 35(6), pages 2441-2473, August.
    2. Xiaowei Guan & Jun Zhao, 2022. "A Two-Step Fuzzy MCDM Method for Implementation of Sustainable Precision Manufacturing: Evidence from China," Sustainability, MDPI, vol. 14(13), pages 1-27, July.
    3. Krzysztof Ejsmont & Bartlomiej Gladysz & Aldona Kluczek, 2020. "Impact of Industry 4.0 on Sustainability—Bibliometric Literature Review," Sustainability, MDPI, vol. 12(14), pages 1-29, July.
    4. James J. H. Liou & Perry C. Y. Liu & Huai-Wei Lo, 2020. "A Failure Mode Assessment Model Based on Neutrosophic Logic for Switched-Mode Power Supply Risk Analysis," Mathematics, MDPI, vol. 8(12), pages 1-19, December.
    5. Liang, Fuqi & Brunelli, Matteo & Rezaei, Jafar, 2020. "Consistency issues in the best worst method: Measurements and thresholds," Omega, Elsevier, vol. 96(C).
    6. Salimi, Negin & Rezaei, Jafar, 2018. "Evaluating firms’ R&D performance using best worst method," Evaluation and Program Planning, Elsevier, vol. 66(C), pages 147-155.
    7. Maria Polorecka & Jozef Kubas & Pavel Danihelka & Katarina Petrlova & Katarina Repkova Stofkova & Katarina Buganova, 2021. "Use of Software on Modeling Hazardous Substance Release as a Support Tool for Crisis Management," Sustainability, MDPI, vol. 13(1), pages 1-15, January.
    8. Ravindra Singh Saluja & Varinder Singh, 2023. "Attribute-based characterization, coding, and selection of joining processes using a novel MADM approach," OPSEARCH, Springer;Operational Research Society of India, vol. 60(2), pages 616-655, June.
    9. Junli Zhang & Guoteng Wang & Zheng Xu & Zheren Zhang, 2022. "A Comprehensive Evaluation Method and Strengthening Measures for AC/DC Hybrid Power Grids," Energies, MDPI, vol. 15(12), pages 1-20, June.
    10. Hamzeh Soltanali & Mehdi Khojastehpour & Siamak Kheybari, 2023. "Evaluating the critical success factors for maintenance management in agro-industries using multi-criteria decision-making techniques," Operations Management Research, Springer, vol. 16(2), pages 949-968, June.
    11. Gianmarco Bressanelli & Federico Adrodegari & Daniela C. A. Pigosso & Vinit Parida, 2022. "Towards the Smart Circular Economy Paradigm: A Definition, Conceptualization, and Research Agenda," Sustainability, MDPI, vol. 14(9), pages 1-20, April.
    12. Yossi Hadad & Baruch Keren & Dima Alberg, 2023. "An Expert System for Ranking and Matching Electric Vehicles to Customer Specifications and Requirements," Energies, MDPI, vol. 16(11), pages 1-18, May.
    13. Ebrahim Sharifi & Saman Hassanzadeh Amin & Liping Fang, 2025. "Assessing sustainability of food supply chains by using a novel method integrating group multi-criteria decision-making and interval Type-2 fuzzy set," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 27(2), pages 3665-3705, February.
    14. Vieira, Fabiana C. & Ferreira, Fernando A.F. & Govindan, Kannan & Ferreira, Neuza C.M.Q.F. & Banaitis, Audrius, 2022. "Measuring urban digitalization using cognitive mapping and the best worst method (BWM)," Technology in Society, Elsevier, vol. 71(C).
    15. Besharati Fard, Moein & Moradian, Parisa & Emarati, Mohammadreza & Ebadi, Mehdi & Gholamzadeh Chofreh, Abdoulmohammad & Klemeŝ, Jiří Jaromír, 2022. "Ground-mounted photovoltaic power station site selection and economic analysis based on a hybrid fuzzy best-worst method and geographic information system: A case study Guilan province," Renewable and Sustainable Energy Reviews, Elsevier, vol. 169(C).
    16. Ana Teresa Tavares-Lehmann & Celeste Varum, 2021. "Industry 4.0 and Sustainability: A Bibliometric Literature Review," Sustainability, MDPI, vol. 13(6), pages 1-15, March.
    17. Negin Salimi & Jafar Rezaei, 2016. "Measuring efficiency of university-industry Ph.D. projects using best worst method," Scientometrics, Springer;Akadémiai Kiadó, vol. 109(3), pages 1911-1938, December.
    18. Chun-Chieh Tseng & Jun-Yi Zeng & Min-Liang Hsieh & Chih-Hung Hsu, 2022. "Analysis of Innovation Drivers of New and Old Kinetic Energy Conversion Using a Hybrid Multiple-Criteria Decision-Making Model in the Post-COVID-19 Era: A Chinese Case," Mathematics, MDPI, vol. 10(20), pages 1-25, October.
    19. Tavana, Madjid & Khalili Nasr, Arash & Mina, Hassan & Michnik, Jerzy, 2022. "A private sustainable partner selection model for green public-private partnerships and regional economic development," Socio-Economic Planning Sciences, Elsevier, vol. 83(C).
    20. Jairo Ortega & Sarbast Moslem & János Tóth & Tamás Péter & Juan Palaguachi & Mario Paguay, 2020. "Using Best Worst Method for Sustainable Park and Ride Facility Location," Sustainability, MDPI, vol. 12(23), pages 1-18, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:annopr:v:331:y:2023:i:1:d:10.1007_s10479-023-05472-6. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.