IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i21p5687-d437842.html
   My bibliography  Save this article

Model for the Discharging of a Dual PCM Heat Storage Tank and Its Experimental Validation

Author

Listed:
  • Artur Nemś

    (Department of Thermodynamics and Renewable Energy Sources, Wroclaw University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wroclaw, Poland)

  • Antonio M. Puertas

    (Dpto. de Química y Física, Universidad de Almería, 04120 Almería, Spain
    CIESOL, Joint Center University of Almería-CIEMAT, 04120 Almería, Spain)

Abstract

The important topic of modelling tanks filled with phase change materials (PCMs) is discussed in this article. Due to the increasing use of heating and cooling installations, tanks containing two types of PCMs are the subject of many experimental analyses. However, there are still deficiencies in their models, which are presented in this paper. The theory model was created in order to design two tanks, each with a volume of 2 m 3 . They were filled with water and containers with two PCMs. The modelled tanks were meant to replace the existing water tanks that were previously used in the solar heating and cooling installation in a research building located in the southern part of Spain. After the tanks were assembled, the model was validated during the summer period when the designed storage tanks supported the operation of the solar system operating in the cooling mode. The created model consists of a 1D description of the heat transfer in the storage tank, and also a 1D description of the phase change in the containers with the PCMs. The model takes into account the front of the phase change and also discusses its impact on the thermal efficiency of the tanks. The agreement of the water output temperature is very good and validates the model, which can then be used to provide further details on the operation of the storage system—in particular, heat fluxes or a fraction of solid or liquid PCM.

Suggested Citation

  • Artur Nemś & Antonio M. Puertas, 2020. "Model for the Discharging of a Dual PCM Heat Storage Tank and Its Experimental Validation," Energies, MDPI, vol. 13(21), pages 1-16, October.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:21:p:5687-:d:437842
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/21/5687/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/21/5687/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Behi, Mohammadreza & Mirmohammadi, Seyed Aliakbar & Ghanbarpour, Morteza & Behi, Hamidreza & Palm, Björn, 2018. "Evaluation of a novel solar driven sorption cooling/heating system integrated with PCM storage compartment," Energy, Elsevier, vol. 164(C), pages 449-464.
    2. Rosiek, Sabina & Batlles, Francisco Javier, 2013. "Renewable energy solutions for building cooling, heating and power system installed in an institutional building: Case study in southern Spain," Renewable and Sustainable Energy Reviews, Elsevier, vol. 26(C), pages 147-168.
    3. Iten, Muriel & Liu, Shuli & Shukla, Ashish, 2016. "A review on the air-PCM-TES application for free cooling and heating in the buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 61(C), pages 175-186.
    4. Antonio Real-Fernández & Joaquín Navarro-Esbrí & Adrián Mota-Babiloni & Ángel Barragán-Cervera & Luis Domenech & Fernando Sánchez & Angelo Maiorino & Ciro Aprea, 2019. "Modeling of a PCM TES Tank Used as an Alternative Heat Sink for a Water Chiller. Analysis of Performance and Energy Savings," Energies, MDPI, vol. 12(19), pages 1-18, September.
    5. F. Javier Batlles & Bartosz Gil & Svetlana Ushak & Jacek Kasperski & Marcos Luján & Diana Maldonado & Magdalena Nemś & Artur Nemś & Antonio M. Puertas & Manuel S. Romero-Cano & Sabina Rosiek & Mario G, 2020. "Development and Results from Application of PCM-Based Storage Tanks in a Solar Thermal Comfort System of an Institutional Building—A Case Study," Energies, MDPI, vol. 13(15), pages 1-24, July.
    6. Abdelsalam, M.Y. & Teamah, H.M. & Lightstone, M.F. & Cotton, J.S., 2020. "Hybrid thermal energy storage with phase change materials for solar domestic hot water applications: Direct versus indirect heat exchange systems," Renewable Energy, Elsevier, vol. 147(P1), pages 77-88.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Muhammad Suleman Malik & Naveed Iftikhar & Abdul Wadood & Muhammad Omer Khan & Muhammad Usman Asghar & Shahbaz Khan & Tahir Khurshaid & Ki-Chai Kim & Zabdur Rehman & S. Tauqeer ul Islam Rizvi, 2020. "Design and Fabrication of Solar Thermal Energy Storage System Using Potash Alum as a PCM," Energies, MDPI, vol. 13(23), pages 1-16, November.
    2. Patricia Royo & Luis Acevedo & Álvaro J. Arnal & Maryori Diaz-Ramírez & Tatiana García-Armingol & Victor J. Ferreira & Germán Ferreira & Ana M. López-Sabirón, 2021. "Decision Support System of Innovative High-Temperature Latent Heat Storage for Waste Heat Recovery in the Energy-Intensive Industry," Energies, MDPI, vol. 14(2), pages 1-13, January.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. F. Javier Batlles & Bartosz Gil & Svetlana Ushak & Jacek Kasperski & Marcos Luján & Diana Maldonado & Magdalena Nemś & Artur Nemś & Antonio M. Puertas & Manuel S. Romero-Cano & Sabina Rosiek & Mario G, 2020. "Development and Results from Application of PCM-Based Storage Tanks in a Solar Thermal Comfort System of an Institutional Building—A Case Study," Energies, MDPI, vol. 13(15), pages 1-24, July.
    2. Li, Min & Zhou, Dongyi & Jiang, Yaqing, 2021. "Preparation and thermal storage performance of phase change ceramsite sand and thermal storage light-weight concrete," Renewable Energy, Elsevier, vol. 175(C), pages 143-152.
    3. Sarı, Ahmet & Hekimoğlu, Gökhan & Tyagi, V.V. & Sharma, R.K., 2020. "Evaluation of pumice for development of low-cost and energy-efficient composite phase change materials and lab-scale thermoregulation performances of its cementitious plasters," Energy, Elsevier, vol. 207(C).
    4. Diana D’Agostino & Francesco Esposito & Adriana Greco & Claudia Masselli & Francesco Minichiello, 2020. "Parametric Analysis on an Earth-to-Air Heat Exchanger Employed in an Air Conditioning System," Energies, MDPI, vol. 13(11), pages 1-24, June.
    5. Rolka, Paulina & Przybylinski, Tomasz & Kwidzinski, Roman & Lackowski, Marcin, 2021. "The heat capacity of low-temperature phase change materials (PCM) applied in thermal energy storage systems," Renewable Energy, Elsevier, vol. 172(C), pages 541-550.
    6. Zhu, Yanlong & Lu, Jie & Yuan, Yuan & Wang, Fuqiang & Tan, Heping, 2020. "Effect of radiation on the effective thermal conductivity of encapsulated capsules containing high-temperature phase change materials," Renewable Energy, Elsevier, vol. 160(C), pages 676-685.
    7. Yuanshen Lu & Kamel Hooman & Aleks D. Atrens & Hugh Russell, 2017. "An Experimental Facility to Validate Ground Source Heat Pump Optimisation Models for the Australian Climate," Energies, MDPI, vol. 10(1), pages 1-15, January.
    8. Khatri, Rahul & Goyal, Rahul & Sharma, Ravi Kumar, 2021. "Advances in the developments of solar cooker for sustainable development: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    9. Andrés Villarruel-Jaramillo & Manuel Pérez-García & José M. Cardemil & Rodrigo A. Escobar, 2021. "Review of Polygeneration Schemes with Solar Cooling Technologies and Potential Industrial Applications," Energies, MDPI, vol. 14(20), pages 1-30, October.
    10. Chen, C.Q. & Diao, Y.H. & Zhao, Y.H. & Wang, Z.Y. & Liang, L. & Wang, T.Y. & An, Y., 2021. "Optimization of phase change thermal storage units/devices with multichannel flat tubes: A theoretical study," Renewable Energy, Elsevier, vol. 167(C), pages 700-717.
    11. Nishant Modi & Xiaolin Wang & Michael Negnevitsky, 2023. "Solar Hot Water Systems Using Latent Heat Thermal Energy Storage: Perspectives and Challenges," Energies, MDPI, vol. 16(4), pages 1-20, February.
    12. Cui, Hongzhi & Tang, Waiching & Qin, Qinghua & Xing, Feng & Liao, Wenyu & Wen, Haibo, 2017. "Development of structural-functional integrated energy storage concrete with innovative macro-encapsulated PCM by hollow steel ball," Applied Energy, Elsevier, vol. 185(P1), pages 107-118.
    13. Santillán Soto, Néstor & García Cueto, O. Rafael & Ojeda Benítez, Sara & Lambert Arista, Alejandro Adolfo, 2014. "Photovoltaic low power systems and their environmental impact:Yuma, Arizona, U.S.A. case study and projections for Mexicali, Mexico," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 172-177.
    14. Ramos-Teodoro, Jerónimo & Rodríguez, Francisco & Berenguel, Manuel & Torres, José Luis, 2018. "Heterogeneous resource management in energy hubs with self-consumption: Contributions and application example," Applied Energy, Elsevier, vol. 229(C), pages 537-550.
    15. Ait Laasri, Imad & Es-sakali, Niima & Charai, Mouatassim & Mghazli, Mohamed Oualid & Outzourhit, Abdelkader, 2024. "Recent progress, limitations, and future directions of macro-encapsulated phase change materials for building applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 199(C).
    16. Lizana, Jesús & Chacartegui, Ricardo & Barrios-Padura, Angela & Ortiz, Carlos, 2018. "Advanced low-carbon energy measures based on thermal energy storage in buildings: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3705-3749.
    17. Yan, Zhongjun & Zhu, Yuexiang & Liu, Lifang & Yu, Zhun (Jerry) & Li, Shuisheng & Zhang, Guoqiang, 2023. "Performance enhancement of cylindrical latent heat storage units in hot water tanks via wavy design," Renewable Energy, Elsevier, vol. 218(C).
    18. Vítor Leal & Raul Teixeira, 2020. "PoDIT: Portable Device for Indoor Temperature Stabilization: Concept and Theoretical Performance Assessment," Energies, MDPI, vol. 13(22), pages 1-15, November.
    19. Su, Bosheng & Han, Wei & Qu, Wanjun & Liu, Changchun & Jin, Hongguang, 2018. "A new hybrid photovoltaic/thermal and liquid desiccant system for trigeneration application," Applied Energy, Elsevier, vol. 226(C), pages 808-818.
    20. Behi, Hamidreza & Karimi, Danial & Jaguemont, Joris & Gandoman, Foad Heidari & Kalogiannis, Theodoros & Berecibar, Maitane & Van Mierlo, Joeri, 2021. "Novel thermal management methods to improve the performance of the Li-ion batteries in high discharge current applications," Energy, Elsevier, vol. 224(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:21:p:5687-:d:437842. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.