IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i21p5671-d437177.html
   My bibliography  Save this article

Structured Light Profilometry on m-PTC

Author

Listed:
  • Gianluca Marotta

    (The National Institute of Optics (CNR-INO), 50125 Florence, Italy)

  • Paola Sansoni

    (The National Institute of Optics (CNR-INO), 50125 Florence, Italy)

  • Franco Francini

    (The National Institute of Optics (CNR-INO), 50125 Florence, Italy)

  • David Jafrancesco

    (The National Institute of Optics (CNR-INO), 50125 Florence, Italy)

  • Maurizio De Lucia

    (Department of Industrial Engineering, University of Florence, 50139 Florence, Italy)

  • Daniela Fontani

    (The National Institute of Optics (CNR-INO), 50125 Florence, Italy)

Abstract

In concentrating solar systems, it is essential to study the optical losses of the collectors. A fundamental parameter is the intercept factor , namely, the fraction of sunrays reflected by the concentrator that reaches the receiver. Optical profilometry studies the relationship between the collector profile and the intercept factor , which influences the collection efficiency. Profilometric analyses were performed on a micro-parabolic trough collector (m-PTC), with reduced sizes and greater mirror curvature than a usual PTC. The proposed technique projects a luminous pattern (structured light) both on the collector with an opaque covering and on a flat reference plane. Measurement set-up and calibration technique were developed for m-PTC. A program coded in Python analyzed the images and reconstructs the mirror profile. The tilted reference plane was reconstructed using an original geometric model and a calibration procedure. The focal length of each parabolic section was calculated, providing information on surface defects in the mirror. An important parameter obtained was the displacement of the focus of the parabola with respect to the ideal position. Using this value, the intercept factor was estimated to be 0.89. The proposed technique was validated by comparing the results with an independent profilometric study applied to the same m-PTC.

Suggested Citation

  • Gianluca Marotta & Paola Sansoni & Franco Francini & David Jafrancesco & Maurizio De Lucia & Daniela Fontani, 2020. "Structured Light Profilometry on m-PTC," Energies, MDPI, vol. 13(21), pages 1-17, October.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:21:p:5671-:d:437177
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/21/5671/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/21/5671/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Sansoni, P. & Fontani, D. & Francini, F. & Giannuzzi, A. & Sani, E. & Mercatelli, L. & Jafrancesco, D., 2011. "Optical collection efficiency and orientation of a solar trough medium-power plant installed in Italy," Renewable Energy, Elsevier, vol. 36(9), pages 2341-2347.
    2. Li, Qiyuan & Zheng, Cheng & Shirazi, Ali & Bany Mousa, Osama & Moscia, Fabio & Scott, Jason A. & Taylor, Robert A., 2017. "Design and analysis of a medium-temperature, concentrated solar thermal collector for air-conditioning applications," Applied Energy, Elsevier, vol. 190(C), pages 1159-1173.
    3. Fernández-García, A. & Zarza, E. & Valenzuela, L. & Pérez, M., 2010. "Parabolic-trough solar collectors and their applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(7), pages 1695-1721, September.
    4. Giacomo Pierucci & Sahand Hosouli & Michele Salvestroni & Matteo Messeri & Federico Fagioli & Francesco Taddei & Maurizio De Lucia, 2018. "Experimental Methodology and Thermal Loss Tests on Small Size Absorber Tubes for Solar Applications," Energies, MDPI, vol. 11(10), pages 1-9, September.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Gianluca Marotta & Daniela Fontani & Franco Francini & David Jafrancesco & Maurizio De Lucia & Paola Sansoni, 2022. "Laser Profilometry on Micro-PTC," Energies, MDPI, vol. 15(14), pages 1-18, July.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Balghouthi, Moncef & Trabelsi, Seif Eddine & Amara, Mahmoud Ben & Ali, Abdessalem Bel Hadj & Guizani, Amenallah, 2016. "Potential of concentrating solar power (CSP) technology in Tunisia and the possibility of interconnection with Europe," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 1227-1248.
    2. Zhou, Ran & Wang, Ruilin & Xing, Chenjian & Sun, Jian & Guo, Yafei & Li, Weiling & Qu, Wanjun & Hong, Hui & Zhao, Chuanwen, 2022. "Design and analysis of a compact solar concentrator tracking via the refraction of the rotating prism," Energy, Elsevier, vol. 251(C).
    3. Li, Longlong & Li, Huairui & Xu, Qian & Huang, Weidong, 2015. "Performance analysis of Azimuth Tracking Fixed Mirror Solar Concentrator," Renewable Energy, Elsevier, vol. 75(C), pages 722-732.
    4. Widyolar, Bennett & Jiang, Lun & Ferry, Jonathan & Winston, Roland, 2018. "Non-tracking East-West XCPC solar thermal collector for 200 celsius applications," Applied Energy, Elsevier, vol. 216(C), pages 521-533.
    5. Gianluca Marotta & Daniela Fontani & Franco Francini & David Jafrancesco & Maurizio De Lucia & Paola Sansoni, 2022. "Laser Profilometry on Micro-PTC," Energies, MDPI, vol. 15(14), pages 1-18, July.
    6. Yang, Moucun & Moghimi, M.A. & Zhu, Yuezhao & Qiao, Runpeng & Wang, Yinfeng & Taylor, Robert A., 2020. "Optical and thermal performance analysis of a micro parabolic trough collector for building integration," Applied Energy, Elsevier, vol. 260(C).
    7. Okoroigwe, Edmund & Madhlopa, Amos, 2016. "An integrated combined cycle system driven by a solar tower: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 337-350.
    8. Camelia Stanciu & Dorin Stanciu & Adina-Teodora Gheorghian, 2017. "Thermal Analysis of a Solar Powered Absorption Cooling System with Fully Mixed Thermal Storage at Startup," Energies, MDPI, vol. 10(1), pages 1-19, January.
    9. Vélez, Fredy & Segovia, José J. & Martín, M. Carmen & Antolín, Gregorio & Chejne, Farid & Quijano, Ana, 2012. "A technical, economical and market review of organic Rankine cycles for the conversion of low-grade heat for power generation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(6), pages 4175-4189.
    10. Drosou, Vassiliki & Kosmopoulos, Panos & Papadopoulos, Agis, 2016. "Solar cooling system using concentrating collectors for office buildings: A case study for Greece," Renewable Energy, Elsevier, vol. 97(C), pages 697-708.
    11. Bitam, El Wardi & Demagh, Yassine & Hachicha, Ahmed A. & Benmoussa, Hocine & Kabar, Yassine, 2018. "Numerical investigation of a novel sinusoidal tube receiver for parabolic trough technology," Applied Energy, Elsevier, vol. 218(C), pages 494-510.
    12. Syed M. Hussain & Wasim Jamshed & Rabia Safdar & Faisal Shahzad & Nor Ain Azeany Mohd Nasir & Ikram Ullah, 2023. "Chemical reaction and thermal characteristiecs of Maxwell nanofluid flow-through solar collector as a potential solar energy cooling application: A modified Buongiorno's model," Energy & Environment, , vol. 34(5), pages 1409-1432, August.
    13. Wang, Ruilin & Qu, Wanjun & Hong, Hui & Sun, Jie & Jin, Hongguang, 2018. "Experimental performance of 300 kWth prototype of parabolic trough collector with rotatable axis and irreversibility analysis," Energy, Elsevier, vol. 161(C), pages 595-609.
    14. Hernández-Escobedo, Q. & Rodríguez-García, E. & Saldaña-Flores, R. & Fernández-García, A. & Manzano-Agugliaro, F., 2015. "Solar energy resource assessment in Mexican states along the Gulf of Mexico," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 216-238.
    15. El Kouche, Amal & Ortegón Gallego, Francisco, 2022. "Modeling and numerical simulation of a parabolic trough collector using an HTF with temperature dependent physical properties," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 192(C), pages 430-451.
    16. Kalogirou, Soteris A., 2012. "A detailed thermal model of a parabolic trough collector receiver," Energy, Elsevier, vol. 48(1), pages 298-306.
    17. Bernardos, Eva & López, Ignacio & Rodríguez, Javier & Abánades, Alberto, 2013. "Assessing the potential of hybrid fossil–solar thermal plants for energy policy making: Brayton cycles," Energy Policy, Elsevier, vol. 62(C), pages 99-106.
    18. Yang, Xiaoping & Yang, Xiaoxi & Ding, Jing & Shao, Youyuan & Fan, Hongbo, 2012. "Numerical simulation study on the heat transfer characteristics of the tube receiver of the solar thermal power tower," Applied Energy, Elsevier, vol. 90(1), pages 142-147.
    19. Kumaresan, G. & Sudhakar, P. & Santosh, R. & Velraj, R., 2017. "Experimental and numerical studies of thermal performance enhancement in the receiver part of solar parabolic trough collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 1363-1374.
    20. Ajbar, Wassila & Parrales, A. & Huicochea, A. & Hernández, J.A., 2022. "Different ways to improve parabolic trough solar collectors’ performance over the last four decades and their applications: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:21:p:5671-:d:437177. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.