IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i22p4354-d287247.html
   My bibliography  Save this article

A Numerical Investigation of the Influence of Geometric Parameters on the Performance of a Multi-Channel Confluent Water Supply

Author

Listed:
  • Ge Zhao

    (School of Mechanical and Electrical Engineering, China University of Mining and Technology, Xuzhou 221116, China)

  • Wei Li

    (School of Mechanical and Electrical Engineering, China University of Mining and Technology, Xuzhou 221116, China)

  • Jinsong Zhu

    (School of Mechanical and Electrical Engineering, China University of Mining and Technology, Xuzhou 221116, China)

Abstract

Transportation efficiency is a problem of particular interest in multi-channel confluent water supply engineering. Transportation efficiency depends not only on the system control strategy but also on the pressure loss (pressure difference between the inlet and outlet) and pressure drop (amplitude of outlet pressure fluctuations) of its structure. In this article, sensitivity analyses of the pressure loss and pressure drop to changes in multi-channel confluent water supply geometry are presented. An experimental set-up was established to validate computational fluid dynamic (CFD) predictions and obtain the boundary conditions for two-channel synchronous switching. The influences of the geometric structure varies by the clustered pipe diameter (40 mm < Dc < 80 mm), main pipe diameter (30 mm < Do < 80 mm), channel pitch (60 mm < L < 400 mm) and number of channels (2 ≤ n ≤ 4); those variables were investigated with the help of CFD simulations. The results showed that configuration “C” can be considered a costless method of decreasing pressure loss ( β C (2.05) < β A (2.42) < β B (2.64)) and that the different configurations are insensitive to pressure drop. The variations of the influence of channel pitch and clustered pipe diameter on pressure loss have extremes at L/d = 5 and Dc/d = 2.5, respectively, but the effect on pressure drop is not obvious. The main pipe diameter and the inlet velocity have more significant influences on efficiency. The results can be used to choose the proper geometry of multi-channel confluent water supply to enable energy savings.

Suggested Citation

  • Ge Zhao & Wei Li & Jinsong Zhu, 2019. "A Numerical Investigation of the Influence of Geometric Parameters on the Performance of a Multi-Channel Confluent Water Supply," Energies, MDPI, vol. 12(22), pages 1-21, November.
    • Handle: RePEc:gam:jeners:v:12:y:2019:i:22:p:4354-:d:287247
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/22/4354/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/12/22/4354/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Xueqing Liu & Song Yue & Luyi Lu & Wei Gao & Jianlan Li, 2018. "Experimental and Numerical Studies on Flow and Turbulence Characteristics of Impinging Stream Reactors with Dynamic Inlet Velocity Variation," Energies, MDPI, vol. 11(7), pages 1-24, July.
    2. Janusz R. Rak & Katarzyna Pietrucha-Urbanik, 2019. "An Approach to Determine Risk Indices for Drinking Water–Study Investigation," Sustainability, MDPI, vol. 11(11), pages 1-12, June.
    3. Panagiotis Karvounis & Dimitrios Koubogiannis & Elias Hontzopoulos & Antonios Hatziapostolou, 2019. "Numerical and Experimental Study of Flow Characteristics in Solar Collector Manifolds," Energies, MDPI, vol. 12(8), pages 1-17, April.
    4. Barbara Zardin & Giovanni Cillo & Carlo Alberto Rinaldini & Enrico Mattarelli & Massimo Borghi, 2017. "Pressure Losses in Hydraulic Manifolds," Energies, MDPI, vol. 10(3), pages 1-21, March.
    5. Amanowicz, Łukasz, 2018. "Influence of geometrical parameters on the flow characteristics of multi-pipe earth-to-air heat exchangers – experimental and CFD investigations," Applied Energy, Elsevier, vol. 226(C), pages 849-861.
    6. Marek Urbanik & Barbara Tchórzewska-Cieślak & Katarzyna Pietrucha-Urbanik, 2019. "Analysis of the Safety of Functioning Gas Pipelines in Terms of the Occurrence of Failures," Energies, MDPI, vol. 12(17), pages 1-13, August.
    7. Barbara Zardin & Giovanni Cillo & Massimo Borghi & Alessandro D’Adamo & Stefano Fontanesi, 2017. "Pressure Losses in Multiple-Elbow Paths and in V-Bends of Hydraulic Manifolds," Energies, MDPI, vol. 10(6), pages 1-21, June.
    8. Rezghi, Ali & Riasi, Alireza, 2018. "The interaction effect of hydraulic transient conditions of two parallel pump-turbine units in a pumped-storage power plant with considering “S-shaped” instability region: Numerical simulation," Renewable Energy, Elsevier, vol. 118(C), pages 896-908.
    9. Rezghi, A. & Riasi, A., 2016. "Sensitivity analysis of transient flow of two parallel pump-turbines operating at runaway," Renewable Energy, Elsevier, vol. 86(C), pages 611-622.
    10. Arun Shankar, Vishnu Kalaiselvan & Umashankar, Subramaniam & Paramasivam, Shanmugam & Hanigovszki, Norbert, 2016. "A comprehensive review on energy efficiency enhancement initiatives in centrifugal pumping system," Applied Energy, Elsevier, vol. 181(C), pages 495-513.
    11. Juan Manuel García-Guendulain & José Manuel Riesco-Avila & Francisco Elizalde-Blancas & Juan Manuel Belman-Flores & Juan Serrano-Arellano, 2018. "Numerical Study on the Effect of Distribution Plates in the Manifolds on the Flow Distribution and Thermal Performance of a Flat Plate Solar Collector," Energies, MDPI, vol. 11(5), pages 1-21, April.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ryo Arai & Satoru Sakai & Akihiro Tatsuoka & Qin Zhang, 2021. "Analytical, Experimental, and Numerical Investigation of Energy in Hydraulic Cylinder Dynamics of Agriculture Scale Excavators," Energies, MDPI, vol. 14(19), pages 1-20, September.
    2. Dongfei Li & Ning Dai & Hongtao Wang & Fujun Zhang, 2023. "Mathematical Modeling Study of Pressure Loss in the Flow Channels of Additive Manufacturing Aviation Hydraulic Valves," Energies, MDPI, vol. 16(4), pages 1-15, February.
    3. Andrea Vacca, 2018. "Energy Efficiency and Controllability of Fluid Power Systems," Energies, MDPI, vol. 11(5), pages 1-6, May.
    4. Daqing Zhou & Huixiang Chen & Yuan Zheng & Kan Kan & An Yu & Maxime Binama, 2019. "Development and Numerical Performance Analysis of a Pump Directly Driven by a Hydrokinetic Turbine," Energies, MDPI, vol. 12(22), pages 1-20, November.
    5. Jun-hui Zhang & Gan Liu & Ruqi Ding & Kun Zhang & Min Pan & Shihao Liu, 2019. "3D Printing for Energy-Saving: Evidence from Hydraulic Manifolds Design," Energies, MDPI, vol. 12(13), pages 1-21, June.
    6. Sheng Chen & Jian Zhang & Gaohui Li & Xiaodong Yu, 2019. "Influence Mechanism of Geometric Characteristics of Water Conveyance System on Extreme Water Hammer during Load Rejection in Pumped Storage Plants," Energies, MDPI, vol. 12(15), pages 1-22, July.
    7. Hu, Jinhong & Yang, Jiebin & Zeng, Wei & Zhao, Zhigao & Yang, Jiandong, 2021. "Hydraulic interaction of two parallel pump-turbines in constant-speed oscillation: Measurement, simulation, and sensitivity analysis," Renewable Energy, Elsevier, vol. 176(C), pages 269-279.
    8. Katarzyna Pietrucha-Urbanik & Barbara Tchórzewska-Cieślak & Mohamed Eid, 2020. "Water Network-Failure Data Assessment," Energies, MDPI, vol. 13(11), pages 1-14, June.
    9. Martin Beer & Radim Rybár & Michal Cehlár & Sergey Zhironkin & Peter Sivák, 2020. "Design and Numerical Study of the Novel Manifold Header for the Evacuated Tube Solar Collector," Energies, MDPI, vol. 13(10), pages 1-12, May.
    10. Junlong Li & Chuangneng Cai & Feng Zhang, 2020. "Assessment of Ecological Efficiency and Environmental Sustainability of the Minjiang-Source in China," Sustainability, MDPI, vol. 12(11), pages 1-15, June.
    11. Chen, Sheng & Wang, Jing & Zhang, Jian & Yu, Xiaodong & He, Wei, 2020. "Transient behavior of two-stage load rejection for multiple units system in pumped storage plants," Renewable Energy, Elsevier, vol. 160(C), pages 1012-1022.
    12. Fernández Oro, J.M. & Barrio Perotti, R. & Galdo Vega, M. & González, J., 2023. "Effect of the radial gap size on the deterministic flow in a centrifugal pump due to impeller-tongue interactions," Energy, Elsevier, vol. 278(PA).
    13. Johnson, Hilary A. & Simon, Kevin P. & Slocum, Alexander H., 2021. "Data analytics and pump control in a wastewater treatment plant," Applied Energy, Elsevier, vol. 299(C).
    14. Diaz, Cesar & Ruiz, Fredy & Patino, Diego, 2017. "Modeling and control of water booster pressure systems as flexible loads for demand response," Applied Energy, Elsevier, vol. 204(C), pages 106-116.
    15. Xu, Wei & Chen, Genglin & Shi, Huijin & Zhang, Pengcheng & Chen, Xuemei, 2023. "Research on operational characteristics of coal power centrifugal fans at off-design working conditions based on flap-angle adjustment," Energy, Elsevier, vol. 284(C).
    16. Kwang-Seob Lee & Eun-Chul Kang & Yu-Jin Kim & Euy-Joon Lee, 2019. "Model Verification and Justification Study of Spirally Corrugated Pipes in a Ground-Air Heat Exchanger Application," Energies, MDPI, vol. 12(21), pages 1-13, October.
    17. Filipe, Jorge & Bessa, Ricardo J. & Reis, Marisa & Alves, Rita & Póvoa, Pedro, 2019. "Data-driven predictive energy optimization in a wastewater pumping station," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    18. José Ignacio Sarasúa & Guillermo Martínez-Lucas & Carlos A. Platero & José Ángel Sánchez-Fernández, 2018. "Dual Frequency Regulation in Pumping Mode in a Wind–Hydro Isolated System," Energies, MDPI, vol. 11(11), pages 1-17, October.
    19. Xueqing Liu & Song Yue & Luyi Lu & Wei Gao & Jianlan Li, 2018. "Numerical Simulations of a Gas–Solid Two-Phase Impinging Stream Reactor with Dynamic Inlet Flow," Energies, MDPI, vol. 11(7), pages 1-24, July.
    20. Zeng, Wei & Yang, Jiandong & Tang, Renbo & Yang, Weijia, 2016. "Extreme water-hammer pressure during one-after-another load shedding in pumped-storage stations," Renewable Energy, Elsevier, vol. 99(C), pages 35-44.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:22:p:4354-:d:287247. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.