IDEAS home Printed from https://ideas.repec.org/a/gam/jagris/v12y2022i5p684-d813231.html
   My bibliography  Save this article

Analysis on the Economic Feasibility of a Plant Factory Combined with Architectural Technology for Energy Performance Improvement

Author

Listed:
  • Yeweon Kim

    (Building Energy Research Department, Korea Institute of Civil Engineering and Building Technology, Ilsan 10223, Korea)

  • Hye-Ry Shin

    (Building Energy Research Department, Korea Institute of Civil Engineering and Building Technology, Ilsan 10223, Korea)

  • Su-hyun Oh

    (Building Energy Research Department, Korea Institute of Civil Engineering and Building Technology, Ilsan 10223, Korea)

  • Ki-Hyung Yu

    (Building Energy Research Department, Korea Institute of Civil Engineering and Building Technology, Ilsan 10223, Korea)

Abstract

In this study, a comparative economic analysis was conducted for typical greenhouses, plant factories with natural and artificial light, and those with only artificial light, based on the insulation, artificial light, and photovoltaic (PV) installation costs. In addition, the results of research on primary energy consumption and greenhouse gas (GHG) emissions from the use of fossil fuels were presented. By comparing the case-wise annual energy consumption, when all energy sources were converted into primary energy consumption based on the applied coefficients for collection, transport, and processing, to unify calculations for different fossil fuel energy sources, the case of the installed PV systems exhibited large reductions, of 424% and 340%, in terms of primary energy consumption and GHG emissions, respectively. Furthermore, electric heating resulted in higher primary energy consumption and GHG emissions than oil. When the economic analysis included the plant factory installation cost used to maintain the temperature required for plant growth in winter, the PV installation exhibited the highest cost; additionally, all plant factories showed an investment payback period of seven to nine years, which is comparable to typical greenhouses. Based on these results, we aim to reduce the use of fossil fuels for sustainable energy by combining architectural technology for improved energy performance in the agricultural environment.

Suggested Citation

  • Yeweon Kim & Hye-Ry Shin & Su-hyun Oh & Ki-Hyung Yu, 2022. "Analysis on the Economic Feasibility of a Plant Factory Combined with Architectural Technology for Energy Performance Improvement," Agriculture, MDPI, vol. 12(5), pages 1-11, May.
  • Handle: RePEc:gam:jagris:v:12:y:2022:i:5:p:684-:d:813231
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2077-0472/12/5/684/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2077-0472/12/5/684/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Jiang, Joe-Air & Su, Yu-Li & Shieh, Jyh-Cherng & Kuo, Kun-Chang & Lin, Tzu-Shiang & Lin, Ta-Te & Fang, Wei & Chou, Jui-Jen & Wang, Jen-Cheng, 2014. "On application of a new hybrid maximum power point tracking (MPPT) based photovoltaic system to the closed plant factory," Applied Energy, Elsevier, vol. 124(C), pages 309-324.
    2. Yorifuji, Ryota & Obara, Shin'ya, 2022. "Economic design of artificial light plant factories based on the energy conversion efficiency of biomass," Applied Energy, Elsevier, vol. 305(C).
    3. Graamans, Luuk & Baeza, Esteban & van den Dobbelsteen, Andy & Tsafaras, Ilias & Stanghellini, Cecilia, 2018. "Plant factories versus greenhouses: Comparison of resource use efficiency," Agricultural Systems, Elsevier, vol. 160(C), pages 31-43.
    4. Graamans, Luuk & Tenpierik, Martin & van den Dobbelsteen, Andy & Stanghellini, Cecilia, 2020. "Plant factories: Reducing energy demand at high internal heat loads through façade design," Applied Energy, Elsevier, vol. 262(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yorifuji, Ryota & Obara, Shin'ya, 2022. "Economic design of artificial light plant factories based on the energy conversion efficiency of biomass," Applied Energy, Elsevier, vol. 305(C).
    2. Cossu, Marco & Tiloca, Maria Teresa & Cossu, Andrea & Deligios, Paola A. & Pala, Tore & Ledda, Luigi, 2023. "Increasing the agricultural sustainability of closed agrivoltaic systems with the integration of vertical farming: A case study on baby-leaf lettuce," Applied Energy, Elsevier, vol. 344(C).
    3. Engler, Nicholas & Krarti, Moncef, 2021. "Review of energy efficiency in controlled environment agriculture," Renewable and Sustainable Energy Reviews, Elsevier, vol. 141(C).
    4. Dsouza, Ajwal & Newman, Lenore & Graham, Thomas & Fraser, Evan D.G., 2023. "Exploring the landscape of controlled environment agriculture research: A systematic scoping review of trends and topics," Agricultural Systems, Elsevier, vol. 209(C).
    5. Michael Martin & Elvira Molin, 2019. "Environmental Assessment of an Urban Vertical Hydroponic Farming System in Sweden," Sustainability, MDPI, vol. 11(15), pages 1-14, July.
    6. Nicole Meinusch & Susanne Kramer & Oliver Körner & Jürgen Wiese & Ingolf Seick & Anita Beblek & Regine Berges & Bernhard Illenberger & Marco Illenberger & Jennifer Uebbing & Maximilian Wolf & Gunter S, 2021. "Integrated Cycles for Urban Biomass as a Strategy to Promote a CO 2 -Neutral Society—A Feasibility Study," Sustainability, MDPI, vol. 13(17), pages 1-22, August.
    7. Barkat Rabbi & Zhong-Hua Chen & Subbu Sethuvenkatraman, 2019. "Protected Cropping in Warm Climates: A Review of Humidity Control and Cooling Methods," Energies, MDPI, vol. 12(14), pages 1-24, July.
    8. Bożena Matysiak & Stanisław Kaniszewski & Jacek Dyśko & Waldemar Kowalczyk & Artur Kowalski & Maria Grzegorzewska, 2021. "The Impact of LED Light Spectrum on the Growth, Morphological Traits, and Nutritional Status of ‘Elizium’ Romaine Lettuce Grown in an Indoor Controlled Environment," Agriculture, MDPI, vol. 11(11), pages 1-15, November.
    9. Jiang, Joe-Air & Su, Yu-Li & Kuo, Kun-Chang & Wang, Chien-Hao & Liao, Min-Sheng & Wang, Jen-Cheng & Huang, Chen-Kang & Chou, Cheng-Ying & Lee, Chien-Hsing & Shieh, Jyh-Cherng, 2017. "On a hybrid MPPT control scheme to improve energy harvesting performance of traditional two-stage inverters used in photovoltaic systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 1113-1128.
    10. Gloria Alexandra Ortiz Rocha & Maria Angelica Pichimata & Edwin Villagran, 2021. "Research on the Microclimate of Protected Agriculture Structures Using Numerical Simulation Tools: A Technical and Bibliometric Analysis as a Contribution to the Sustainability of Under-Cover Cropping," Sustainability, MDPI, vol. 13(18), pages 1-40, September.
    11. Liu, Haijun & Yin, Congyan & Gao, Zhuangzhuang & Hou, Lizhu, 2021. "Evaluation of cucumber yield, economic benefit and water productivity under different soil matric potentials in solar greenhouses in North China," Agricultural Water Management, Elsevier, vol. 243(C).
    12. Li, Fang-Fang & Qiu, Jun, 2016. "Multi-objective optimization for integrated hydro–photovoltaic power system," Applied Energy, Elsevier, vol. 167(C), pages 377-384.
    13. Vavilapalli, Sridhar & Umashankar, S. & Sanjeevikumar, P. & Ramachandaramurthy, Vigna K. & Mihet-Popa, Lucian & Fedák, Viliam, 2018. "Three-stage control architecture for cascaded H-Bridge inverters in large-scale PV systems – Real time simulation validation," Applied Energy, Elsevier, vol. 229(C), pages 1111-1127.
    14. Heino Pesch & Louis Louw, 2023. "Exploring the Industrial Symbiosis Potential of Plant Factories during the Initial Establishment Phase," Sustainability, MDPI, vol. 15(2), pages 1-30, January.
    15. Fathabadi, Hassan, 2016. "Novel fast dynamic MPPT (maximum power point tracking) technique with the capability of very high accurate power tracking," Energy, Elsevier, vol. 94(C), pages 466-475.
    16. Theodora Karanisa & Yasmine Achour & Ahmed Ouammi & Sami Sayadi, 2022. "Smart greenhouses as the path towards precision agriculture in the food-energy and water nexus: case study of Qatar," Environment Systems and Decisions, Springer, vol. 42(4), pages 521-546, December.
    17. Dafni Despoina Avgoustaki & George Xydis, 2020. "Plant factories in the water-food-energy Nexus era: a systematic bibliographical review," Food Security: The Science, Sociology and Economics of Food Production and Access to Food, Springer;The International Society for Plant Pathology, vol. 12(2), pages 253-268, April.
    18. Carotti, Laura & Pistillo, Alessandro & Zauli, Ilaria & Meneghello, Davide & Martin, Michael & Pennisi, Giuseppina & Gianquinto, Giorgio & Orsini, Francesco, 2023. "Improving water use efficiency in vertical farming: Effects of growing systems, far-red radiation and planting density on lettuce cultivation," Agricultural Water Management, Elsevier, vol. 285(C).
    19. Li, Shaowu, 2016. "Linear equivalent models at the maximum power point based on variable weather parameters for photovoltaic cell," Applied Energy, Elsevier, vol. 182(C), pages 94-104.
    20. Fathabadi, Hassan, 2016. "Novel highly accurate universal maximum power point tracker for maximum power extraction from hybrid fuel cell/photovoltaic/wind power generation systems," Energy, Elsevier, vol. 116(P1), pages 402-416.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jagris:v:12:y:2022:i:5:p:684-:d:813231. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.