IDEAS home Printed from https://ideas.repec.org/a/eee/techno/v141y2025ics0166497225000197.html
   My bibliography  Save this article

Unpacking experimentation in design thinking: Contributions to innovation performance and the moderating role of digital technologies

Author

Listed:
  • Magistretti, Stefano
  • Dell’Era, Claudio
  • Candi, Marina
  • Swan, Scott K.
  • Bianchi, Mattia
  • Calabretta, Giulia
  • Stigliani, Ileana
  • Verganti, Roberto

Abstract

Design thinking is an innovation approach that emphasizes developing and testing hypotheses about the desirability, feasibility, and viability of an idea through iterative experimentation. Although widely used, there is limited empirical evidence to support the effectiveness of experimentation practices in design thinking projects. Similarly, the impact of integrating digital technologies into experimentation processes remains underexplored. This study addresses these gaps by analyzing data from 246 design thinking projects to examine how early and frequent experimentation influences innovation performance, specifically in terms of effectiveness and efficiency. It also examines how the use of digital technologies moderates these relationships. The results show that both early and frequent experimentation positively influence innovation effectiveness, while only early experimentation significantly improves innovation efficiency. Moreover, the use of digital technologies strengthens the positive effects of early experimentation on both effectiveness and efficiency. This research provides valuable theoretical and practical insights by deepening our understanding of how experimentation and digital tools drive innovation performance in design thinking projects.

Suggested Citation

  • Magistretti, Stefano & Dell’Era, Claudio & Candi, Marina & Swan, Scott K. & Bianchi, Mattia & Calabretta, Giulia & Stigliani, Ileana & Verganti, Roberto, 2025. "Unpacking experimentation in design thinking: Contributions to innovation performance and the moderating role of digital technologies," Technovation, Elsevier, vol. 141(C).
    • Handle: RePEc:eee:techno:v:141:y:2025:i:c:s0166497225000197
    DOI: 10.1016/j.technovation.2025.103187
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0166497225000197
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.technovation.2025.103187?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Cho, Jaehan & DeStefano, Timothy & Kim, Hanhin & Kim, Inchul & Paik, Jin Hyun, 2023. "What's driving the diffusion of next-generation digital technologies?," Technovation, Elsevier, vol. 119(C).
    2. Yi, Yaqun & Chen, Yu & Li, Dan, 2022. "Stakeholder ties, organizational learning, and business model innovation: A business ecosystem perspective," Technovation, Elsevier, vol. 114(C).
    3. Yashar Mansoori & Martin Lackéus, 2020. "Comparing effectuation to discovery-driven planning, prescriptive entrepreneurship, business planning, lean startup, and design thinking," Small Business Economics, Springer, vol. 54(3), pages 791-818, March.
    4. Kahn, Kenneth B. & Candi, Marina, 2021. "Investigating the relationship between innovation strategy and performance," Journal of Business Research, Elsevier, vol. 132(C), pages 56-66.
    5. Bianchi, Mattia & Marzi, Giacomo & Guerini, Massimiliano, 2020. "Agile, Stage-Gate and their combination: Exploring how they relate to performance in software development," Journal of Business Research, Elsevier, vol. 110(C), pages 538-553.
    6. Dean A. Shepherd & Marc Gruber, 2021. "The Lean Startup Framework: Closing the Academic–Practitioner Divide," Entrepreneurship Theory and Practice, , vol. 45(5), pages 967-998, September.
    7. Sanasi, Silvia & Ghezzi, Antonio & Cavallo, Angelo, 2023. "What happens after market validation? Experimentation for scaling in technology-based startups," Technological Forecasting and Social Change, Elsevier, vol. 196(C).
    8. Mariani, Marcello M. & Machado, Isa & Magrelli, Vittoria & Dwivedi, Yogesh K., 2023. "Artificial intelligence in innovation research: A systematic review, conceptual framework, and future research directions," Technovation, Elsevier, vol. 122(C).
    9. Alan MacCormack & Roberto Verganti & Marco Iansiti, 2001. "Developing Products on "Internet Time": The Anatomy of a Flexible Development Process," Management Science, INFORMS, vol. 47(1), pages 133-150, January.
    10. Mortati, Marzia & Magistretti, Stefano & Cautela, Cabirio & Dell’Era, Claudio, 2023. "Data in design: How big data and thick data inform design thinking projects," Technovation, Elsevier, vol. 122(C).
    11. Mariani, Marcello M. & Nambisan, Satish, 2021. "Innovation Analytics and Digital Innovation Experimentation: The Rise of Research-driven Online Review Platforms," Technological Forecasting and Social Change, Elsevier, vol. 172(C).
    12. Kevin J. Boudreau, 2012. "Let a Thousand Flowers Bloom? An Early Look at Large Numbers of Software App Developers and Patterns of Innovation," Organization Science, INFORMS, vol. 23(5), pages 1409-1427, October.
    13. Lee, Sang M. & Trimi, Silvana, 2021. "Convergence innovation in the digital age and in the COVID-19 pandemic crisis," Journal of Business Research, Elsevier, vol. 123(C), pages 14-22.
    14. Rembrand Koning & Sharique Hasan & Aaron Chatterji, 2022. "Experimentation and Start-up Performance: Evidence from A/B Testing," Management Science, INFORMS, vol. 68(9), pages 6434-6453, September.
    15. Thomke, Stefan & von Hippel, Eric & Franke, Roland, 1998. "Modes of experimentation: an innovation process--and competitive--variable," Research Policy, Elsevier, vol. 27(3), pages 315-332, July.
    16. Shaik, Aqueeb Sohail & Alshibani, Safiya Mukhtar & Mishra, Shreya & Papa, Armando & Cuomo, Maria Teresa, 2023. "Does learning from innovation failure enhance innovation performance? A quantitative investigation of small businesses," Technovation, Elsevier, vol. 127(C).
    17. Angelo Cavallo & Federico Cosenz & Guido Noto, 2024. "Business model scaling and growth hacking in digital entrepreneurship," Journal of Small Business Management, Taylor & Francis Journals, vol. 62(4), pages 2058-2085, July.
    18. Candi, Marina & Beltagui, Ahmad, 2019. "Effective use of 3D printing in the innovation process," Technovation, Elsevier, vol. 80, pages 63-73.
    19. Pankaj C. Patel & Marko Kohtamäki & Vinit Parida & Joakim Wincent, 2015. "Entrepreneurial orientation-as-experimentation and firm performance: The enabling role of absorptive capacity," Strategic Management Journal, Wiley Blackwell, vol. 36(11), pages 1739-1749, November.
    20. Roberts, Deborah L. & Candi, Marina, 2024. "Artificial intelligence and innovation management: Charting the evolving landscape," Technovation, Elsevier, vol. 136(C).
    21. Nicholls-Nixon, Charlene L. & Cooper, Arnold C. & Woo, Carolyn Y., 2000. "Strategic experimentation: Understanding change and performance in new ventures," Journal of Business Venturing, Elsevier, vol. 15(5-6), pages 493-521.
    22. Becker, Markus C. & Salvatore, Pasquale & Zirpoli, Francesco, 2005. "The impact of virtual simulation tools on problem-solving and new product development organization," Research Policy, Elsevier, vol. 34(9), pages 1305-1321, November.
    23. Nakata, Cheryl & Hwang, Jiyoung, 2020. "Design thinking for innovation: Composition, consequence, and contingency," Journal of Business Research, Elsevier, vol. 118(C), pages 117-128.
    24. Nile W. Hatch & David C. Mowery, 1998. "Process Innovation and Learning by Doing in Semiconductor Manufacturing," Management Science, INFORMS, vol. 44(11-Part-1), pages 1461-1477, November.
    25. Rajdeep Grewal & Joseph A. Cote & Hans Baumgartner, 2004. "Multicollinearity and Measurement Error in Structural Equation Models: Implications for Theory Testing," Marketing Science, INFORMS, vol. 23(4), pages 519-529, June.
    26. Joshua S. Gans & Scott Stern & Jane Wu, 2019. "Foundations of entrepreneurial strategy," Strategic Management Journal, Wiley Blackwell, vol. 40(5), pages 736-756, May.
    27. Beltagui, Ahmad & Rosli, Ainurul & Candi, Marina, 2020. "Exaptation in a digital innovation ecosystem: The disruptive impacts of 3D printing," Research Policy, Elsevier, vol. 49(1).
    28. Åsa Lindholm-Dahlstrand & Martin Andersson & Bo Carlsson, 2019. "Entrepreneurial experimentation: a key function in systems of innovation," Small Business Economics, Springer, vol. 53(3), pages 591-610, October.
    29. Markus C. Becker & Pasquale Salvatore & Francesco Zirpoli, 2005. "The impact of virtual simulation tools on problem-solving and new product development organization," Post-Print hal-00279174, HAL.
    30. Cai, Ying & Lin, Jun & Zhang, Ruxin, 2023. "When and how to implement design thinking in the innovation process: A longitudinal case study," Technovation, Elsevier, vol. 126(C).
    31. Sihem Ben Mahmoud‐jouini & Christophe Midler, 2020. "Unpacking the notion of prototype archetypes in the early phase of an innovation process," Post-Print hal-03060400, HAL.
    32. Cosenz, Federico & Bivona, Enzo, 2021. "Fostering growth patterns of SMEs through business model innovation. A tailored dynamic business modelling approach," Journal of Business Research, Elsevier, vol. 130(C), pages 658-669.
    33. Stefan H. Thomke, 1998. "Managing Experimentation in the Design of New Products," Management Science, INFORMS, vol. 44(6), pages 743-762, June.
    34. Nightingale, Paul, 2000. "Economies of Scale in Experimentation: Knowledge and Technology in Pharmaceutical R&D," Industrial and Corporate Change, Oxford University Press and the Associazione ICC, vol. 9(2), pages 315-359, June.
    35. Rayna, Thierry & Striukova, Ludmila, 2016. "From rapid prototyping to home fabrication: How 3D printing is changing business model innovation," Technological Forecasting and Social Change, Elsevier, vol. 102(C), pages 214-224.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Steffen Paust & Steffen Korsgaard & Claus Thrane, 2025. "Entrepreneurial prototyping: the role of purpose, prototype recycling, and skills bricolage," Small Business Economics, Springer, vol. 64(2), pages 407-431, February.
    2. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    3. Shivam Gupta & Sachin Modgil & Piera Centobelli & Roberto Cerchione & Serena Strazzullo, 2022. "Additive Manufacturing and Green Information Systems as Technological Capabilities for Firm Performance," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 23(4), pages 515-534, December.
    4. Beltagui, Ahmad & Sesis, Achilleas & Stylos, Nikolaos, 2021. "A bricolage perspective on democratising innovation: The case of 3D printing in makerspaces," Technological Forecasting and Social Change, Elsevier, vol. 163(C).
    5. Harm-Jan Steenhuis & Xin Fang & Tolga Ulusemre, 2020. "Global Diffusion of Innovation during the Fourth Industrial Revolution: The Case of Additive Manufacturing or 3D Printing," International Journal of Innovation and Technology Management (IJITM), World Scientific Publishing Co. Pte. Ltd., vol. 17(01), pages 1-34, February.
    6. Foggetti, Caterina & Natalicchio, Angelo & Ardito, Lorenzo & Albino, Vito, 2025. "Opening the black box of Growth Hacking: Insights into the microfoundations of Lean Startup Capabilities," Journal of Business Research, Elsevier, vol. 191(C).
    7. Cai, Ying & Lin, Jun & Zhang, Ruxin, 2023. "When and how to implement design thinking in the innovation process: A longitudinal case study," Technovation, Elsevier, vol. 126(C).
    8. Hunt, Richard A. & Townsend, David M. & Lerner, Daniel A. & Brownell, Katrina M., 2024. "Pivot, persist or perish? Knowledge problems and the extraordinarily tight boundary conditions of entrepreneurs as scientists," Journal of Business Venturing Insights, Elsevier, vol. 21(C).
    9. Lee, Hyeonsuh, 2023. "Unraveling the effect of pre-entry knowledge of founders on experimentation in nascent industries: A configurational approach," Journal of Business Research, Elsevier, vol. 167(C).
    10. Ukobitz, Desirée Valeria & Faullant, Rita, 2022. "The relative impact of isomorphic pressures on the adoption of radical technology: Evidence from 3D printing," Technovation, Elsevier, vol. 113(C).
    11. Paris Chrysos, 2018. "Empathy in the business model: how Facebook and Google Maps manage external problem-solving processes," Working Papers halshs-01897205, HAL.
    12. Joshi, Yatish & Bodhi, Rahul & Chatterjee, Sheshadri & Mariani, Marcello, 2025. "The impact of growth hacking on firm performance under environmental turbulence: A moderated-mediation analysis," Journal of Business Research, Elsevier, vol. 191(C).
    13. Denicolai, Stefano & Previtali, Pietro, 2023. "Innovation strategy and digital transformation execution in healthcare: The role of the general manager," Technovation, Elsevier, vol. 121(C).
    14. Roberts, Deborah L. & Candi, Marina, 2024. "Artificial intelligence and innovation management: Charting the evolving landscape," Technovation, Elsevier, vol. 136(C).
    15. H. Colleen Stuart, 2017. "Structural Disruption, Relational Experimentation, and Performance in Professional Hockey Teams: A Network Perspective on Member Change," Organization Science, INFORMS, vol. 28(2), pages 283-300, April.
    16. Andries, Petra & Clarysse, Bart & Costa, Sergio, 2021. "Technology ventures' engagement of external actors in the search for viable market applications: On the relevance of Technology Broadcasting and Systematic Validation," Journal of Business Venturing, Elsevier, vol. 36(6).
    17. Jin Zhang & Duoxun Ba, 2024. "Intelligent Development, Knowledge Breadth, and High-Tech Enterprise Innovation: The Moderating Role of Knowledge Absorptive Capacity," Sustainability, MDPI, vol. 16(18), pages 1-18, September.
    18. Johnson, William H.A. & Bicen, Pelin & Zhu, Zhen, 2023. "Being lean: Conceptualizing and operationalizing the Lean Innovation Capability (LIC) of innovative companies," Technovation, Elsevier, vol. 126(C).
    19. Rezazadeh, Arash & Kohns, Marco & Bohnsack, René & António, Nuno & Rita, Paulo, 2025. "Generative AI for growth hacking: How startups use generative AI in their growth strategies," Journal of Business Research, Elsevier, vol. 192(C).
    20. Candi, Marina & Beltagui, Ahmad, 2019. "Effective use of 3D printing in the innovation process," Technovation, Elsevier, vol. 80, pages 63-73.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:techno:v:141:y:2025:i:c:s0166497225000197. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.sciencedirect.com/science/journal/01664972 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.