IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v256y2026ipes0960148125019469.html

Effects of graded-porosity gas diffusion layers used in polymer electrolyte fuel cells

Author

Listed:
  • Okereke, Isaac C.
  • Amiri, Amirpiran
  • Wilberforce, Tabbi
  • Ismail, Mohammed S.

Abstract

Optimising the design of gas diffusion layers (GDLs) is essential to enhance water management and reactant transport in polymer electrolyte fuel cells (PEFCs), which are critical renewable energy conversion technologies required to decarbonise electricity. In this work, a comprehensive three-dimensional model of a PEFC has been developed to analyse the sensitivity of fuel cell performance to graded-porosity cathode GDLs under various humidity conditions and GDL thicknesses. The results show that, for most humidity conditions, the fuel cell performs best when the cathode GDL has low porosity at the catalyst interface and high porosity at the bipolar plate interface. Under relatively low humidity conditions, fuel cell performance deteriorates when using graded-porosity GDLs with higher porosity near the catalyst layer. On the other hand, under high humidity conditions, a cathode GDL with a porosity gradient improves performance compared to a GDL with uniform porosity. Further, when the GDL thickness is reduced from 300 μm to 200 μm, the best performance is achieved with a GDL that has higher porosity near the catalyst layer. These findings are discussed and justified in the study providing valuable guidance for designing advanced GDL structures to improve PEFC efficiency, supporting their wider adoption in renewable energy systems.

Suggested Citation

  • Okereke, Isaac C. & Amiri, Amirpiran & Wilberforce, Tabbi & Ismail, Mohammed S., 2026. "Effects of graded-porosity gas diffusion layers used in polymer electrolyte fuel cells," Renewable Energy, Elsevier, vol. 256(PE).
    • Handle: RePEc:eee:renene:v:256:y:2026:i:pe:s0960148125019469
    DOI: 10.1016/j.renene.2025.124282
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148125019469
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2025.124282?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Solati, Ali & Nasiri, Behzad & Mohammadi-Ahmar, Akbar & Mohammadi, Kamyar & Safari, Amir Hossein, 2019. "Numerical investigation of the effect of different layers configurations on the performance of radial PEM fuel cells," Renewable Energy, Elsevier, vol. 143(C), pages 1877-1889.
    2. Pourrahmani, Hossein & Van herle, Jan, 2022. "Water management of the proton exchange membrane fuel cells: Optimizing the effect of microstructural properties on the gas diffusion layer liquid removal," Energy, Elsevier, vol. 256(C).
    3. Huang, Yu-Xian & Cheng, Chin-Hsiang & Wang, Xiao-Dong & Jang, Jiin-Yuh, 2010. "Effects of porosity gradient in gas diffusion layers on performance of proton exchange membrane fuel cells," Energy, Elsevier, vol. 35(12), pages 4786-4794.
    4. Isaac C. Okereke & Mohammed S. Ismail & Derek B. Ingham & Kevin Hughes & Lin Ma & Mohamed Pourkashanian, 2023. "Single- and Double-Sided Coated Gas Diffusion Layers Used in Polymer Electrolyte Fuel Cells: A Numerical Study," Energies, MDPI, vol. 16(11), pages 1-16, May.
    5. Ceballos, J.O. & Ordóñez, L.C. & Sierra, J.M., 2024. "Water saturation distribution in a PEMFC at the cathode side using OpenFOAM," Renewable Energy, Elsevier, vol. 222(C).
    6. Lv, Xuecheng & Zhou, Zhifu & Wu, Wei-Tao & Wei, Lei & Gao, Linsong & Lyu, Jizu & Li, Yang & Yang, Yunjie & Li, Yubai & Song, Yongchen, 2025. "Two-phase flow in coupled gas diffusion layer and patterned wettability metal foam flow field in PEM fuel cells," Renewable Energy, Elsevier, vol. 242(C).
    7. Wang, Yulin & Zhang, Penghui & Gao, Yuyao & He, Wei & Zhao, Yulong & Wang, Xiaodong, 2022. "Optimal design of cathode gas diffusion layer with arrayed grooves for performance enhancement of a PEM fuel cell," Renewable Energy, Elsevier, vol. 199(C), pages 697-709.
    8. Wilberforce, Tabbi & Olabi, A.G. & Pritchard, Daniel & Abdelkareem, Mohammad Ali & Sayed, Enas Taha, 2023. "Development of proton exchange membrane fuel cell flow plate geometry design," Energy, Elsevier, vol. 283(C).
    9. Ercelik, Mustafa & Ismail, Mohammed S. & Ingham, Derek B. & Hughes, Kevin J. & Ma, Lin & Pourkashanian, Mohamed, 2023. "Efficient X-ray CT-based numerical computations of structural and mass transport properties of nickel foam-based GDLs for PEFCs," Energy, Elsevier, vol. 262(PB).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zeng, Ziteng & Hu, Zunyan & Liu, Huize & Zhang, Yifu & Ye, Kang & Li, Jianqiu & Xu, Liangfei & Ouyang, Minggao & Dong, Kan, 2025. "Distribution characteristics and control optimization of anode and cathode water in fuel cells under low humidification," Applied Energy, Elsevier, vol. 377(PD).
    2. Zhang, Xiaoqing & Yang, Jiapei & Ma, Xiao & Zhuge, Weilin & Shuai, Shijin, 2022. "Modelling and analysis on effects of penetration of microporous layer into gas diffusion layer in PEM fuel cells: Focusing on mass transport," Energy, Elsevier, vol. 254(PA).
    3. Liao, Shuxin & Qiu, Diankai & Yi, Peiyun & Peng, Linfa & Lai, Xinmin, 2022. "Modeling of a novel cathode flow field design with optimized sub-channels to improve drainage for proton exchange membrane fuel cells," Energy, Elsevier, vol. 261(PB).
    4. Dai, Churong & Zuo, Wei & Li, Qingqing & Zhou, Kun & Huang, Yuhan & Zhang, Guangde & E, Jiaqiang, 2024. "Energy conversion efficiency improvement studies on the hydrogen-fueled micro planar combustor with multi-baffles for thermophotovoltaic applications," Energy, Elsevier, vol. 313(C).
    5. Abdollahzadeh, M. & Ribeirinha, P. & Boaventura, M. & Mendes, A., 2018. "Three-dimensional modeling of PEMFC with contaminated anode fuel," Energy, Elsevier, vol. 152(C), pages 939-959.
    6. Yu, Rui Jiao & Guo, Hang & Ye, Fang & Chen, Hao, 2022. "Multi-parameter optimization of stepwise distribution of parameters of gas diffusion layer and catalyst layer for PEMFC peak power density," Applied Energy, Elsevier, vol. 324(C).
    7. Fofana, Daouda & Natarajan, Sadesh Kumar & Hamelin, Jean & Benard, Pierre, 2014. "Low platinum, high limiting current density of the PEMFC (proton exchange membrane fuel cell) based on multilayer cathode catalyst approach," Energy, Elsevier, vol. 64(C), pages 398-403.
    8. Im, Jingyeong & Kwon, Taeho & Lee, Seungho & Kim, Donghan & Cho, Hyungtae & Won, Wangyun & Gu, Boram, 2025. "Unveiling the impact of internal structure on boil-off gas generation in moving liquid hydrogen (LH2) transport trailer," Renewable and Sustainable Energy Reviews, Elsevier, vol. 216(C).
    9. Lan, Shunbo & Liu, Haonian & Zhou, Xinran & Lin, Rui, 2025. "Comprehensive analysis on the influence of perforated structure on mass transfer and performance of gas diffusion layer," Renewable Energy, Elsevier, vol. 246(C).
    10. Liu, Huize & Hu, Zunyan & Li, Jianqiu & Xu, Liangfei & Shao, Yangbin & Ouyang, Minggao, 2023. "Investigation on the optimal GDL thickness design for PEMFCs considering channel/rib geometry matching and operating conditions," Energy, Elsevier, vol. 282(C).
    11. Dai, Churong & Zuo, Wei & Li, Qingqing & Zhou, Kun & Huang, Yuhan & Zhang, Guangde & E, Jiaqiang, 2025. "Numerical investigations on the performance of a hydrogen-fueled micro planar combustor with V-shaped baffle for thermophotovoltaic applications," Energy, Elsevier, vol. 326(C).
    12. Xu, Liangfei & Fang, Chuan & Hu, Junming & Cheng, Siliang & Li, Jianqiu & Ouyang, Minggao & Lehnert, Werner, 2017. "Parameter extraction of polymer electrolyte membrane fuel cell based on quasi-dynamic model and periphery signals," Energy, Elsevier, vol. 122(C), pages 675-690.
    13. Ji-Seong Kim & Keon-Soo Kim & Do-Young Kim & Min Heo & Kap-Seung Choi, 2022. "Effect of Rotational Control for Accelerating Water Discharge on the Performance of a Circular Polymer Electrolyte Membrane Fuel Cell," Energies, MDPI, vol. 15(8), pages 1-14, April.
    14. Ebrahimi, Sasan & Ghorbani, Babak & Vijayaraghavan, Krishna, 2017. "Optimization of catalyst distribution along PEMFC channel through a numerical two-phase model and genetic algorithm," Renewable Energy, Elsevier, vol. 113(C), pages 846-854.
    15. Yang, Yang & Li, Jun & Yang, Yingrui & Lan, Linghan & Liu, Run & Fu, Qian & Zhang, Liang & Liao, Qiang & Zhu, Xun, 2022. "Gradient porous electrode-inducing bubble splitting for highly efficient hydrogen evolution," Applied Energy, Elsevier, vol. 307(C).
    16. Ali Bayat & Prodip K. Das & Suvash C. Saha, 2025. "Modeling Porosity Distribution Strategies in PEM Water Electrolyzers: A Comparative Analytical and Numerical Study," Mathematics, MDPI, vol. 13(13), pages 1-36, June.
    17. Kong, Im Mo & Jung, Aeri & Kim, Young Sang & Kim, Min Soo, 2017. "Numerical investigation on double gas diffusion backing layer functionalized on water removal in a proton exchange membrane fuel cell," Energy, Elsevier, vol. 120(C), pages 478-487.
    18. Cao, Qiang & Chen, Yuji & Wang, Zhiping & Wang, Miaomiao & Wang, Pengcheng & Ge, Lichun & Li, Peng & Zhao, Qinyu & Wang, Bo & Gan, Zhihua, 2025. "Improving the cooling efficiency of cryo-compressed hydrogen based on the temperature-distributed method in regenerative refrigerators," Energy, Elsevier, vol. 314(C).
    19. Jaydev Chetan Zaveri & Shankar Raman Dhanushkodi & C. Ramesh Kumar & Jan Taler & Marek Majdak & Bohdan Węglowski, 2023. "Predicting the Performance of PEM Fuel Cells by Determining Dehydration or Flooding in the Cell Using Machine Learning Models," Energies, MDPI, vol. 16(19), pages 1-16, October.
    20. Tian, Cong & Yuan, Fang & Deng, Tianlun & He, Qianhui & Hu, Cen & Chen, Yong & Liu, Wei, 2024. "Coupled optimization of auxiliary channels and porosity gradient of GDL for PEMFC," Energy, Elsevier, vol. 301(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:256:y:2026:i:pe:s0960148125019469. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.