IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v163y2021icp921-929.html

Wicking capability evaluation of multilayer composite micromesh wicks for ultrathin two-phase heat transfer devices

Author

Listed:
  • Chen, Gong
  • Fan, Dongqiang
  • Zhang, Shiwei
  • Sun, Yalong
  • Zhong, Guisheng
  • Wang, Zhiwei
  • Wan, Zhenpin
  • Tang, Yong

Abstract

With the rapid development of microelectronic devices, efficient thermal management in narrow spaces faces significant challenges. Two-phase heat transfer technology is proposed as a breakthrough in this field; however, big challenges, especially in designing a high-performance wick within limited space, are urgent to be addressed before ultrathin two-phase heat transfer devices (TPHTDs) can be further applied. In this study, a multilayer composite micromesh wick (MCMW), comprised of coarse and fine meshes with different layer combinations, is proposed to enhance the wicking capability, which is promising to further enhance the thermal performance of ultrathin TPHTDs. Capillary rise rate experiments are conducted to evaluate the comprehensive wicking capability. The results show that MCMW structures yield a significant wicking capability enhancement when compared with multilayer single mesh wick (MSMW) structures. The MCMW, consisted of 3 layers of 100-mesh and 3 layers of 300-mesh, exhibits an optimum volumetric flow rate of 14.44 mm3/s and an equilibrated wicking height at 55.98 mm. MCMW structure provides a convenient and effective alternative in enhancing the wicking capability of mesh wicks and the thermal performance of ultrathin TPHTDs.

Suggested Citation

  • Chen, Gong & Fan, Dongqiang & Zhang, Shiwei & Sun, Yalong & Zhong, Guisheng & Wang, Zhiwei & Wan, Zhenpin & Tang, Yong, 2021. "Wicking capability evaluation of multilayer composite micromesh wicks for ultrathin two-phase heat transfer devices," Renewable Energy, Elsevier, vol. 163(C), pages 921-929.
    • Handle: RePEc:eee:renene:v:163:y:2021:i:c:p:921-929
    DOI: 10.1016/j.renene.2020.08.150
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148120313951
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2020.08.150?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Xin, Fei & Ma, Ting & Wang, Qiuwang, 2018. "Thermal performance analysis of flat heat pipe with graded mini-grooves wick," Applied Energy, Elsevier, vol. 228(C), pages 2129-2139.
    2. Chen, Gong & Tang, Yong & Duan, Longhua & Tang, Heng & Zhong, Guisheng & Wan, Zhenping & Zhang, Shiwei & Fu, Ting, 2020. "Thermal performance enhancement of micro-grooved aluminum flat plate heat pipes applied in solar collectors," Renewable Energy, Elsevier, vol. 146(C), pages 2234-2242.
    3. Sohel Murshed, S.M. & Nieto de Castro, C.A., 2017. "A critical review of traditional and emerging techniques and fluids for electronics cooling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 821-833.
    4. Tang, Heng & Tang, Yong & Wan, Zhenping & Li, Jie & Yuan, Wei & Lu, Longsheng & Li, Yong & Tang, Kairui, 2018. "Review of applications and developments of ultra-thin micro heat pipes for electronic cooling," Applied Energy, Elsevier, vol. 223(C), pages 383-400.
    5. Zhang, Shiwei & Chen, Jieling & Sun, Yalong & Li, Jie & Zeng, Jian & Yuan, Wei & Tang, Yong, 2019. "Experimental study on the thermal performance of a novel ultra-thin aluminum flat heat pipe," Renewable Energy, Elsevier, vol. 135(C), pages 1133-1143.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sun, Yalong & Tang, Yong & Zhang, Shiwei & Yuan, Wei & Tang, Heng, 2022. "A review on fabrication and pool boiling enhancement of three-dimensional complex structures," Renewable and Sustainable Energy Reviews, Elsevier, vol. 162(C).
    2. Roberta Caruana & Manfredo Guilizzoni, 2025. "Modeling of Conventional Heat Pipes with Capillary Wicks: A Review," Energies, MDPI, vol. 18(9), pages 1-38, April.
    3. Oleg Volodin & Nikolay Pecherkin & Aleksandr Pavlenko, 2023. "Combining Microstructured Surface and Mesh Covering for Heat Transfer Enhancement in Falling Films of Refrigerant Mixture," Energies, MDPI, vol. 16(2), pages 1-17, January.
    4. Chen, Gong & Yan, Caiman & Yin, Shubin & Tang, Yong & Yuan, Wei & Zhang, Shiwei, 2024. "Vapor-liquid coplanar structure enables high thermal conductive and extremely ultrathin vapor chamber," Energy, Elsevier, vol. 301(C).
    5. Jia-Li Luo & Fan-Bin Zhao & Mou Xu & Dong-Chuan Mo & Shu-Shen Lyu, 2023. "Biomimetic Copper Forest Structural Modification Enhances the Capillary Flow Characteristics of the Copper Mesh Wick," Energies, MDPI, vol. 16(14), pages 1-14, July.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Rakshith, Bairi Levi & Asirvatham, Lazarus Godson & Angeline, Appadurai Anitha & Manova, Stephen & Bose, Jefferson Raja & Selvin Raj, J Perinba & Mahian, Omid & Wongwises, Somchai, 2022. "Cooling of high heat flux miniaturized electronic devices using thermal ground plane: An overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 170(C).
    2. Ghadim, H. Benisi & Godin, A. & Veillere, A. & Duquesne, M. & Haillot, D., 2025. "Review of thermal management of electronics and phase change materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 208(C).
    3. Chen, Gong & Tang, Yong & Duan, Longhua & Tang, Heng & Zhong, Guisheng & Wan, Zhenping & Zhang, Shiwei & Fu, Ting, 2020. "Thermal performance enhancement of micro-grooved aluminum flat plate heat pipes applied in solar collectors," Renewable Energy, Elsevier, vol. 146(C), pages 2234-2242.
    4. Wenjun Xu & Jiarong Cui & Yao Ma & Zhanpeng Hu & Yuyang Qi & Xinying Li & Yuchen Zhong & Tao Luo & Xuyang Chu & Linjing Wu & Weisong Ling & Wei Zhou, 2025. "Adaptative two-phase thermal circulation system for complex-shaped electronic device cooling," Nature Communications, Nature, vol. 16(1), pages 1-15, December.
    5. Qin, Siyu & Ji, Ruiyang & Miao, Chengyu & Jin, Liwen & Yang, Chun & Meng, Xiangzhao, 2024. "Review of enhancing boiling and condensation heat transfer: Surface modification," Renewable and Sustainable Energy Reviews, Elsevier, vol. 189(PA).
    6. Cui, Jiarong & Xu, Wenjun & Yu, Quanyao & Ma, Yao & Hu, Zhanpeng & Zhang, Chao & Xu, Cailian & Xu, Yanxiao & Ling, Weisong & Zhou, Wei, 2025. "Development of high-efficiency flexible heat pipe device for thermal management in foldable phones," Energy, Elsevier, vol. 328(C).
    7. Yuqi Han & Weilin Zhuge & Jie Peng & Yuping Qian & Yangjun Zhang, 2023. "Numerical Investigation on Internal Structures of Ultra-Thin Heat Pipes for PEM Fuel Cells Cooling," Energies, MDPI, vol. 16(3), pages 1-22, January.
    8. A R, Nidhin & Anand, A.R. & Jaiswal, Akhil & Ganesh, Madhu & Solomon, Brusly, 2026. "Flexible heat pipes in thermal management applications – A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 225(C).
    9. Chen, Gong & Yan, Caiman & Yin, Shubin & Tang, Yong & Yuan, Wei & Zhang, Shiwei, 2024. "Vapor-liquid coplanar structure enables high thermal conductive and extremely ultrathin vapor chamber," Energy, Elsevier, vol. 301(C).
    10. Yongle Tang & Xuewei Zhang & Zhichun Liu, 2023. "Experimental Study on the Thermal Performance of Flat Loop Heat Pipe Applied in Data Center Cooling," Energies, MDPI, vol. 16(12), pages 1-21, June.
    11. Jingyu Shen & Ce Guo, 2025. "Biomimetic Design for Enhanced Thermal Performance of Vapor Chambers," Energies, MDPI, vol. 18(5), pages 1-22, March.
    12. Jinghua Yu & Hongyun Yang & Junwei Tao & Jingang Zhao & Yongqiang Luo, 2023. "Performance Evaluation and Optimum Design of Ventilation Roofs with Different Positions of Shape-Stabilized PCM," Sustainability, MDPI, vol. 15(11), pages 1-33, May.
    13. Liangyu Wu & Yingying Chen & Suchen Wu & Mengchen Zhang & Weibo Yang & Fangping Tang, 2018. "Visualization Study of Startup Modes and Operating States of a Flat Two-Phase Micro Thermosyphon," Energies, MDPI, vol. 11(9), pages 1-15, August.
    14. Xiang Gou & Qiyan Zhang & Yamei Li & Yingfan Liu & Shian Liu & Saima Iram, 2018. "Experimental Research on the Thermal Performance and Semi-Visualization of Rectangular Flat Micro-Grooved Gravity Heat Pipes," Energies, MDPI, vol. 11(9), pages 1-12, September.
    15. Gilmore, Nicholas & Timchenko, Victoria & Menictas, Chris, 2018. "Microchannel cooling of concentrator photovoltaics: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 1041-1059.
    16. Azis, Shazmin Shareena Ab., 2021. "Improving present-day energy savings among green building sector in Malaysia using benefit transfer approach: Cooling and lighting loads," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).
    17. Costa, Sol Carolina & Kenisarin, Murat, 2022. "A review of metallic materials for latent heat thermal energy storage: Thermophysical properties, applications, and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 154(C).
    18. Gökçe, Gökay & Çetin, Barbaros & Dursunkaya, Zafer, 2024. "Accelerated 3D CFD modeling of multichannel flat grooved heat pipes," Energy, Elsevier, vol. 305(C).
    19. Xiaochen Zhang & Han Zhao & Jing Li & Fengyu Zhang & Yue Zhang & Hongyu Yan & Zhihao Niu & David Gerada & He Zhang, 2022. "Experimental Investigation of Heat Pipe Inclination Angle Effect on Temperature Nonuniformity in Electrical Machines," Energies, MDPI, vol. 16(1), pages 1-14, December.
    20. Xu, Yanyan & Xue, Yanqin & Qi, Hong & Cai, Weihua, 2021. "An updated review on working fluids, operation mechanisms, and applications of pulsating heat pipes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 144(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:163:y:2021:i:c:p:921-929. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.