IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v118y2018icp847-857.html
   My bibliography  Save this article

Computational fluid dynamics modeling for the design of Archimedes Screw Generator

Author

Listed:
  • Dellinger, Guilhem
  • Garambois, Pierre-André
  • Dellinger, Nicolas
  • Dufresne, Matthieu
  • Terfous, Abdelali
  • Vazquez, Jose
  • Ghenaim, Abdellah

Abstract

The Archimedean Screw Generator (ASG) allows transforming potential energy of a fluid into mechanical energy and is convenient for low-head hydraulic sites. As it is a new and growing technology with few guidelines for design and performance optimization, the present contribution proposes a new experimental and numerical investigation method for studying ASG performances. In order to study the structure of 3D turbulent flows and energy losses in a screw, the Navier Stokes equations a classical turbulence model are solved. As demonstrated, the strength of this method is to allow studying accurately the ASG performance only with usual coefficients in the turbulent closure models. These simulations are achieved for various flow conditions using the geometry of a laboratory-scale screw. It is shown that, the modeled values of torques and efficiencies are in very strong agreement with the experimental ones. Moreover, numerical simulation appears to be a reliable tool for predicting ASG performance which are found higher than 80%.

Suggested Citation

  • Dellinger, Guilhem & Garambois, Pierre-André & Dellinger, Nicolas & Dufresne, Matthieu & Terfous, Abdelali & Vazquez, Jose & Ghenaim, Abdellah, 2018. "Computational fluid dynamics modeling for the design of Archimedes Screw Generator," Renewable Energy, Elsevier, vol. 118(C), pages 847-857.
    • Handle: RePEc:eee:renene:v:118:y:2018:i:c:p:847-857
    DOI: 10.1016/j.renene.2017.10.093
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148117310613
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2017.10.093?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Lisicki, Michal & Lubitz, William & Taylor, Graham W., 2016. "Optimal design and operation of Archimedes screw turbines using Bayesian optimization," Applied Energy, Elsevier, vol. 183(C), pages 1404-1417.
    2. Rohmer, Julien & Knittel, Dominique & Sturtzer, Guy & Flieller, Damien & Renaud, Jean, 2016. "Modeling and experimental results of an Archimedes screw turbine," Renewable Energy, Elsevier, vol. 94(C), pages 136-146.
    3. Williamson, S.J. & Stark, B.H. & Booker, J.D., 2014. "Low head pico hydro turbine selection using a multi-criteria analysis," Renewable Energy, Elsevier, vol. 61(C), pages 43-50.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Dylan Sheneth Edirisinghe & Ho-Seong Yang & Min-Sung Kim & Byung-Ha Kim & Sudath Prasanna Gunawardane & Young-Ho Lee, 2021. "Computational Flow Analysis on a Real Scale Run-of-River Archimedes Screw Turbine with a High Incline Angle," Energies, MDPI, vol. 14(11), pages 1-18, June.
    2. Talukdar, Parag K. & Kulkarni, Vinayak & Saha, Ujjwal K., 2018. "Field-testing of model helical-bladed hydrokinetic turbines for small-scale power generation," Renewable Energy, Elsevier, vol. 127(C), pages 158-167.
    3. Lavrič, Henrik & Rihar, Andraž & Fišer, Rastko, 2019. "Influence of equipment size and installation height on electricity production in an Archimedes screw-based ultra-low head small hydropower plant and its economic feasibility," Renewable Energy, Elsevier, vol. 142(C), pages 468-477.
    4. Dellinger, Guilhem & Simmons, Scott & Lubitz, William David & Garambois, Pierre-André & Dellinger, Nicolas, 2019. "Effect of slope and number of blades on Archimedes screw generator power output," Renewable Energy, Elsevier, vol. 136(C), pages 896-908.
    5. Bouvant, Maël & Betancour, Johan & Velásquez, Laura & Rubio-Clemente, Ainhoa & Chica, Edwin, 2021. "Design optimization of an Archimedes screw turbine for hydrokinetic applications using the response surface methodology," Renewable Energy, Elsevier, vol. 172(C), pages 941-954.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lisicki, Michal & Lubitz, William & Taylor, Graham W., 2016. "Optimal design and operation of Archimedes screw turbines using Bayesian optimization," Applied Energy, Elsevier, vol. 183(C), pages 1404-1417.
    2. Lavrič, Henrik & Rihar, Andraž & Fišer, Rastko, 2019. "Influence of equipment size and installation height on electricity production in an Archimedes screw-based ultra-low head small hydropower plant and its economic feasibility," Renewable Energy, Elsevier, vol. 142(C), pages 468-477.
    3. Zhou, Daqing & Gui, Jia & Deng, Zhiqun Daniel & Chen, Huixiang & Yu, Yunyun & Yu, An & Yang, Chunxia, 2019. "Development of an ultra-low head siphon hydro turbine using computational fluid dynamics," Energy, Elsevier, vol. 181(C), pages 43-50.
    4. Kozyn, Andrew & Lubitz, William David, 2017. "A power loss model for Archimedes screw generators," Renewable Energy, Elsevier, vol. 108(C), pages 260-273.
    5. Lavrič, Henrik & Rihar, Andraž & Fišer, Rastko, 2018. "Simulation of electrical energy production in Archimedes screw-based ultra-low head small hydropower plant considering environment protection conditions and technical limitations," Energy, Elsevier, vol. 164(C), pages 87-98.
    6. Jiaxin Yu & Jun Wang, 2020. "Optimization Design of a Rain-Power Utilization System Based on a Siphon and Its Application in a High-Rise Building," Energies, MDPI, vol. 13(18), pages 1-18, September.
    7. Anilkumar, T.T. & Simon, Sishaj P. & Padhy, Narayana Prasad, 2017. "Residential electricity cost minimization model through open well-pico turbine pumped storage system," Applied Energy, Elsevier, vol. 195(C), pages 23-35.
    8. Ludovic Cassan & Guilhem Dellinger & Pascal Maussion & Nicolas Dellinger, 2021. "Hydrostatic Pressure Wheel for Regulation of Open Channel Networks and for the Energy Supply of Isolated Sites," Sustainability, MDPI, vol. 13(17), pages 1-18, August.
    9. Nishi, Yasuyuki & Mori, Nozomi & Yamada, Naoki & Inagaki, Terumi, 2022. "Study on the design method for axial flow runner that combines design of experiments, response surface method, and optimization method to one-dimensional design method," Renewable Energy, Elsevier, vol. 185(C), pages 96-110.
    10. Jawahar, C.P. & Michael, Prawin Angel, 2017. "A review on turbines for micro hydro power plant," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 882-887.
    11. Rudimar Caricimi & Géremi Gilson Dranka & Dalmarino Setti & Paula Ferreira, 2022. "Reframing the Selection of Hydraulic Turbines Integrating Analytical Hierarchy Process (AHP) and Fuzzy VIKOR Multi-Criteria Methods," Energies, MDPI, vol. 15(19), pages 1-26, October.
    12. Alejandro Tapia Córdoba & Daniel Gutiérrez Reina & Pablo Millán Gata, 2019. "An Evolutionary Computational Approach for Designing Micro Hydro Power Plants," Energies, MDPI, vol. 12(5), pages 1-25, March.
    13. Gerardo Alcalá & Luis Fernando Grisales-Noreña & Quetzalcoatl Hernandez-Escobedo & Jose Javier Muñoz-Criollo & J. D. Revuelta-Acosta, 2021. "SHP Assessment for a Run-of-River (RoR) Scheme Using a Rectangular Mesh Sweeping Approach (MSA) Based on GIS," Energies, MDPI, vol. 14(11), pages 1-21, May.
    14. Benzon, D.S. & Aggidis, G.A. & Anagnostopoulos, J.S., 2016. "Development of the Turgo Impulse turbine: Past and present," Applied Energy, Elsevier, vol. 166(C), pages 1-18.
    15. Erinofiardi Erinofiardi & Ravi Koirala & Nirajan Shiwakoti & Abhijit Date, 2022. "Sustainable Power Generation Using Archimedean Screw Turbine: Influence of Blade Number on Flow and Performance," Sustainability, MDPI, vol. 14(23), pages 1-25, November.
    16. Muhammad Asim & Shoaib Muhammad & Muhammad Amjad & Muhammad Abdullah & M. A. Mujtaba & M. A. Kalam & Mohamed Mousa & Manzoore Elahi M. Soudagar, 2022. "Design and Parametric Optimization of the High-Speed Pico Waterwheel for Rural Electrification of Pakistan," Sustainability, MDPI, vol. 14(11), pages 1-22, June.
    17. Powell, D. & Ebrahimi, A. & Nourbakhsh, S. & Meshkahaldini, M. & Bilton, A.M., 2018. "Design of pico-hydro turbine generator systems for self-powered electrochemical water disinfection devices," Renewable Energy, Elsevier, vol. 123(C), pages 590-602.
    18. Quaranta, Emanuele & Revelli, Roberto, 2018. "Gravity water wheels as a micro hydropower energy source: A review based on historic data, design methods, efficiencies and modern optimizations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 97(C), pages 414-427.
    19. Betancour, Johan & Romero-Menco, Fredys & Velásquez, Laura & Rubio-Clemente, Ainhoa & Chica, Edwin, 2023. "Design and optimization of a runner for a gravitational vortex turbine using the response surface methodology and experimental tests," Renewable Energy, Elsevier, vol. 210(C), pages 306-320.
    20. Viktor Sebestyén & Mátyás Horváth & Viola Somogyi & Endre Domokos & Róbert Koch, 2022. "Network-Analysis-Supported Design Aspects and Performance Optimization of Floating Water Wheels," Energies, MDPI, vol. 15(18), pages 1-12, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:118:y:2018:i:c:p:847-857. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.