IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v185y2019icp546-566.html
   My bibliography  Save this article

Preventive remanufacturing planning of production equipment under operational and imperfect maintenance constraints: A hybrid genetic algorithm based approach

Author

Listed:
  • Bensmain, Yassir
  • Dahane, Mohammed
  • Bennekrouf, Mohammed
  • Sari, Zaki

Abstract

Remanufacturing an equipment before the end of its life may generate substantial profits for both the user and the remanufacturer. However, the equipment operating conditions as well as the quality of maintenance actions undergone throughout the life of equipment largely affect the total life cycle costs from the user’s perspective, and the quality of the recovered equipment from the remanufacturer’s perspective. This research aims at investigating the remanufacturing opportunities of production equipment from the user’s perspective, used to produce a single product in order to meet deterministic and dynamic demands over a finite horizon. Preventive maintenance actions on equipment are assumed to be imperfect. Indeed, when performed, these actions can improve the equipment to reach a state between the “As-good-as-new†level and the “As-bad-as-old†level. It is assumed that the stakeholders (the equipment’s user and the original equipment manufacturer-remanufacturer) are interested by all remanufacturing opportunities. The objective of the present work is to develop an integrated approach to jointly optimize the production plan, the remanufacturing plan and the quality of spare parts used in each remanufacturing action.

Suggested Citation

  • Bensmain, Yassir & Dahane, Mohammed & Bennekrouf, Mohammed & Sari, Zaki, 2019. "Preventive remanufacturing planning of production equipment under operational and imperfect maintenance constraints: A hybrid genetic algorithm based approach," Reliability Engineering and System Safety, Elsevier, vol. 185(C), pages 546-566.
    • Handle: RePEc:eee:reensy:v:185:y:2019:i:c:p:546-566
    DOI: 10.1016/j.ress.2018.09.001
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832018308378
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2018.09.001?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Fitouhi, Mohamed-Chahir & Nourelfath, Mustapha, 2014. "Integrating noncyclical preventive maintenance scheduling and production planning for multi-state systems," Reliability Engineering and System Safety, Elsevier, vol. 121(C), pages 175-186.
    2. Hu, Jiawen & Jiang, Zuhua & Liao, Haitao, 2017. "Preventive maintenance of a single machine system working under piecewise constant operating condition," Reliability Engineering and System Safety, Elsevier, vol. 168(C), pages 105-115.
    3. Mohamed Noomane Darghouth & Anis Chelbi & Daoud Ait-kadi, 2017. "Investigating reliability improvement of second-hand production equipment considering warranty and preventive maintenance strategies," International Journal of Production Research, Taylor & Francis Journals, vol. 55(16), pages 4643-4661, August.
    4. Zhao, Xuejing & Fouladirad, Mitra & Bérenguer, Christophe & Bordes, Laurent, 2010. "Condition-based inspection/replacement policies for non-monotone deteriorating systems with environmental covariates," Reliability Engineering and System Safety, Elsevier, vol. 95(8), pages 921-934.
    5. Richard Grover & Christine Grover, 2015. "Obsolescence – a cause for concern?," Journal of Property Investment & Finance, Emerald Group Publishing Limited, vol. 33(3), pages 299-314, April.
    6. Jean Jacques Lambin, 2009. "Capitalism and Sustainable Development," Symphonya. Emerging Issues in Management, University of Milano-Bicocca, issue 2 Market-.
    7. Do, Phuc & Voisin, Alexandre & Levrat, Eric & Iung, Benoit, 2015. "A proactive condition-based maintenance strategy with both perfect and imperfect maintenance actions," Reliability Engineering and System Safety, Elsevier, vol. 133(C), pages 22-32.
    8. Maxim A Bushuev & Alfred Guiffrida & M. Y. Jaber & Mehmood Khan, 2015. "A review of inventory lot sizing review papers," Management Research Review, Emerald Group Publishing Limited, vol. 38(3), pages 283-298, March.
    9. Glock, C. H. & Grosse, E. H. & Ries, J. M., 2014. "The Lot Sizing Problem: A Tertiary Study," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 63361, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    10. Ghita Ettaye & Abdellah El Barkany & Ahmed El Khalfi, 2016. "The integration of maintenance plans and production scheduling for a degradable multi-state system: a literature review," International Journal of Productivity and Quality Management, Inderscience Enterprises Ltd, vol. 19(1), pages 74-97.
    11. Wang, Daqin & Tang, Ou & Zhang, Lihua, 2014. "A periodic review lot sizing problem with random yields, disruptions and inventory capacity," International Journal of Production Economics, Elsevier, vol. 155(C), pages 330-339.
    12. Glock, Christoph H. & Grosse, Eric H. & Ries, Jörg M., 2014. "The lot sizing problem: A tertiary study," International Journal of Production Economics, Elsevier, vol. 155(C), pages 39-51.
    13. Feng, Hanxin & Xi, Lifeng & Xiao, Lei & Xia, Tangbin & Pan, Ershun, 2018. "Imperfect preventive maintenance optimization for flexible flowshop manufacturing cells considering sequence-dependent group scheduling," Reliability Engineering and System Safety, Elsevier, vol. 176(C), pages 218-229.
    14. Jafari, L. & Makis, V., 2015. "Joint optimal lot sizing and preventive maintenance policy for a production facility subject to condition monitoring," International Journal of Production Economics, Elsevier, vol. 169(C), pages 156-168.
    15. You, Ming-Yi & Li, Hongguang & Meng, Guang, 2011. "Control-limit preventive maintenance policies for components subject to imperfect preventive maintenance and variable operational conditions," Reliability Engineering and System Safety, Elsevier, vol. 96(5), pages 590-598.
    16. Govindan, Kannan & Soleimani, Hamed & Kannan, Devika, 2015. "Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future," European Journal of Operational Research, Elsevier, vol. 240(3), pages 603-626.
    17. Wenbo Shi & K. Jo Min, 2014. "Product Remanufacturing and Replacement Decisions Under Operations and Maintenance Cost Uncertainties," The Engineering Economist, Taylor & Francis Journals, vol. 59(2), pages 154-174, April.
    18. Guo Qing Cheng & Bing Hai Zhou & Ling Li, 2016. "Joint optimisation of production rate and preventive maintenance in machining systems," International Journal of Production Research, Taylor & Francis Journals, vol. 54(21), pages 6378-6394, November.
    19. Aghezzaf, El-Houssaine & Khatab, Abdelhakim & Tam, Phuoc Le, 2016. "Optimizing production and imperfect preventive maintenance planning׳s integration in failure-prone manufacturing systems," Reliability Engineering and System Safety, Elsevier, vol. 145(C), pages 190-198.
    20. Navin Chari & Claver Diallo & Uday Venkatadri & Abdelhakim Khatab, 2016. "Modeling and analysis of a warranty policy using new and reconditioned parts," Applied Stochastic Models in Business and Industry, John Wiley & Sons, vol. 32(4), pages 539-553, July.
    21. Vaishali Sharma & S.K. Garg & P.B. Sharma, 2015. "Remanufacturing process: the case of heavy equipment support services," International Journal of Services and Operations Management, Inderscience Enterprises Ltd, vol. 22(1), pages 40-59.
    22. Dillenberger, Christof & Escudero, Laureano F. & Wollensak, Artur & Zhang, Wu, 1994. "On practical resource allocation for production planning and scheduling with period overlapping setups," European Journal of Operational Research, Elsevier, vol. 75(2), pages 275-286, June.
    23. Karimi, B. & Fatemi Ghomi, S. M. T. & Wilson, J. M., 2003. "The capacitated lot sizing problem: a review of models and algorithms," Omega, Elsevier, vol. 31(5), pages 365-378, October.
    24. Horst Tempelmeier & Karina Copil, 2016. "Capacitated lot sizing with parallel machines, sequence-dependent setups, and a common setup operator," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 38(4), pages 819-847, October.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhang, Xugang & Xu, Lu & Zhang, Hua & Jiang, Zhigang & Wang, Yan, 2021. "Emergy based sustainability evaluation model for retired machineries integrating energy, environmental and social factors," Energy, Elsevier, vol. 235(C).
    2. Feng, Liuyang & Zhang, Limao, 2022. "Enhanced prediction intervals of tunnel-induced settlement using the genetic algorithm and neural network," Reliability Engineering and System Safety, Elsevier, vol. 223(C).
    3. Qu, Pengfei & Zhang, Limao & Zhu, Qizhi & Wu, Maozhi, 2023. "Probabilistic reliability assessment of twin tunnels considering fluid–solid coupling with physics-guided machine learning," Reliability Engineering and System Safety, Elsevier, vol. 231(C).
    4. Xiao, Hui & Yi, Kunxiang & Liu, Haitao & Kou, Gang, 2021. "Reliability modeling and optimization of a two-dimensional sliding window system," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    5. Feng, Liuyang & Zhang, Limao, 2021. "Assessment of tunnel face stability subjected to an adjacent tunnel," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    6. Wakiru, James & Pintelon, Liliane & Muchiri, Peter N. & Chemweno, Peter K., 2021. "Integrated remanufacturing, maintenance and spares policies towards life extension of a multi-component system," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    7. Liu, Yu & Zhang, Qin & Ouyang, Zhiyuan & Huang, Hong-Zhong, 2021. "Integrated production planning and preventive maintenance scheduling for synchronized parallel machines," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    8. Karina Cecilia Arredondo-Soto & Alejandro Jiménez-Zaragoza & Marco Augusto Miranda-Ackerman & Julio Blanco-Fernández & Alejandra García-Lechuga & Guadalupe Hernández-Escobedo & Jorge Luis García-Alcar, 2022. "Design and Repair Strategies Based on Product–Service System and Remanufacturing for Value Preservation," Sustainability, MDPI, vol. 14(14), pages 1-19, July.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Glock, Christoph H. & Grosse, Eric H., 2021. "The impact of controllable production rates on the performance of inventory systems: A systematic review of the literature," European Journal of Operational Research, Elsevier, vol. 288(3), pages 703-720.
    2. Melega, Gislaine Mara & de Araujo, Silvio Alexandre & Jans, Raf, 2018. "Classification and literature review of integrated lot-sizing and cutting stock problems," European Journal of Operational Research, Elsevier, vol. 271(1), pages 1-19.
    3. Gössinger, Ralf & Helmke, Hanna & Kaluzny, Michael, 2017. "Condition-based release of maintenance jobs in a decentralised production-maintenance system – An analysis of alternative stochastic approaches," International Journal of Production Economics, Elsevier, vol. 193(C), pages 528-537.
    4. Sahling, Florian & Hahn, Gerd J., 2019. "Dynamic lot sizing in biopharmaceutical manufacturing," International Journal of Production Economics, Elsevier, vol. 207(C), pages 96-106.
    5. Liu, Yu & Zhang, Qin & Ouyang, Zhiyuan & Huang, Hong-Zhong, 2021. "Integrated production planning and preventive maintenance scheduling for synchronized parallel machines," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    6. Xiufang Zhang & Tangbin Xia & Ershun Pan & Yuqing Li, 2022. "Integrated optimization on production scheduling and imperfect preventive maintenance considering multi-degradation and learning-forgetting effects," Flexible Services and Manufacturing Journal, Springer, vol. 34(2), pages 451-482, June.
    7. Flavio Molina & Reinaldo Morabito & Silvio Alexandre de Araujo, 2016. "MIP models for production lot sizing problems with distribution costs and cargo arrangement," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 67(11), pages 1395-1407, November.
    8. Battini, Daria & Glock, Christoph H. & Grosse, Eric H. & Persona, Alessandro & Sgarbossa, Fabio, 2017. "Reprint of “Ergo-lot-sizing: An approach to integrate ergonomic and economic objectives in manual materials handling”," International Journal of Production Economics, Elsevier, vol. 194(C), pages 32-42.
    9. Coria, V.H. & Maximov, S. & Rivas-Dávalos, F. & Melchor, C.L. & Guardado, J.L., 2015. "Analytical method for optimization of maintenance policy based on available system failure data," Reliability Engineering and System Safety, Elsevier, vol. 135(C), pages 55-63.
    10. Lin Wang & Zhiqiang Lu & Yifei Ren, 2019. "A rolling horizon approach for production planning and condition-based maintenance under uncertain demand," Journal of Risk and Reliability, , vol. 233(6), pages 1014-1028, December.
    11. Jiang, Junwei & An, Youjun & Dong, Yuanfa & Hu, Jiawen & Li, Yinghe & Zhao, Ziye, 2023. "Integrated optimization of non-permutation flow shop scheduling and maintenance planning with variable processing speed," Reliability Engineering and System Safety, Elsevier, vol. 234(C).
    12. Menezes, Mozart B.C. & Jalali, Hamed & Lamas, Alejandro, 2021. "One too many: Product proliferation and the financial performance in manufacturing," International Journal of Production Economics, Elsevier, vol. 242(C).
    13. Santos, Augusto César de Jesus & Cavalcante, Cristiano Alexandre Virgínio & Wu, Shaomin, 2023. "Maintenance policies and models: A bibliometric and literature review of strategies for reuse and remanufacturing," Reliability Engineering and System Safety, Elsevier, vol. 231(C).
    14. Alaswad, Suzan & Xiang, Yisha, 2017. "A review on condition-based maintenance optimization models for stochastically deteriorating system," Reliability Engineering and System Safety, Elsevier, vol. 157(C), pages 54-63.
    15. Avelina Alejo-Reyes & Erik Cuevas & Alma Rodríguez & Abraham Mendoza & Elias Olivares-Benitez, 2020. "An Improved Grey Wolf Optimizer for a Supplier Selection and Order Quantity Allocation Problem," Mathematics, MDPI, vol. 8(9), pages 1-24, August.
    16. Quetschlich, Mathias & Moetz, André & Otto, Boris, 2021. "Optimisation model for multi-item multi-echelon supply chains with nested multi-level products," European Journal of Operational Research, Elsevier, vol. 290(1), pages 144-158.
    17. Liu, Zhuojun & Chen, Jing & Diallo, Claver, 2018. "Optimal production and pricing strategies for a remanufacturing firm," International Journal of Production Economics, Elsevier, vol. 204(C), pages 290-315.
    18. Oliveira, Washington A. & Fiorotto, Diego J. & Song, Xiang & Jones, Dylan F., 2021. "An extended goal programming model for the multiobjective integrated lot-sizing and cutting stock problem," European Journal of Operational Research, Elsevier, vol. 295(3), pages 996-1007.
    19. Zhang, Nan & Deng, Yingjun & Liu, Bin & Zhang, Jun, 2023. "Condition-based maintenance for a multi-component system in a dynamic operating environment," Reliability Engineering and System Safety, Elsevier, vol. 231(C).
    20. Lam, Ji Ye Janet & Banjevic, Dragan, 2015. "A myopic policy for optimal inspection scheduling for condition based maintenance," Reliability Engineering and System Safety, Elsevier, vol. 144(C), pages 1-11.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:185:y:2019:i:c:p:546-566. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.