IDEAS home Printed from https://ideas.repec.org/a/eee/recore/v125y2017icp37-47.html
   My bibliography  Save this article

Review of solid state recycling of aluminum chips

Author

Listed:
  • Wan, Bingbing
  • Chen, Weiping
  • Lu, Tiwen
  • Liu, Fangfang
  • Jiang, Zhenfei
  • Mao, Mengdi

Abstract

In contrast with the conventional remelting recycling of aluminum and its alloy chips, the solid state recycling techniques, which can convert the chips directly into dense bulk materials, have attracted significant attention primarily because it possesses many advantages including lower energy consumption, lower metal loss as well as almost no emissions of harmful gases and solid wasters. In this keynote paper, with a view to the current researches of the solid state recycling techniques based on the severe plastic deformation (SPD) and powder metallurgy (P/M), the characteristics and applications of several typical methods, such as hot extrusion, equal channel angular pressing (ECAP), cyclic extrusion compression (CEC), friction stir extrusion (FSE), high pressure torsion (HPT), screw extrusion and spark plasma sintering (SPS), are introduced. A growing number of researches and literatures suggest that the mechanical properties of solid state recycled specimens are primarily dependent on the chip bonding quality and microstructure of the corresponding bulk materials. Then, the mechanism analysis of consolidation of chips is carried out, and three relevant theoretical modes, characterizing the bonding quality, are also mentioned. Moreover, the factors influencing the density and microstructure of chip-consolidated product are discussed comprehensively. Eventually, recommendations in the improvement of solid state recycling techniques and the future prospects are put forward.

Suggested Citation

  • Wan, Bingbing & Chen, Weiping & Lu, Tiwen & Liu, Fangfang & Jiang, Zhenfei & Mao, Mengdi, 2017. "Review of solid state recycling of aluminum chips," Resources, Conservation & Recycling, Elsevier, vol. 125(C), pages 37-47.
    • Handle: RePEc:eee:recore:v:125:y:2017:i:c:p:37-47
    DOI: 10.1016/j.resconrec.2017.06.004
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S092134491730157X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resconrec.2017.06.004?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hao, Han & Qiao, Qinyu & Liu, Zongwei & Zhao, Fuquan, 2017. "Impact of recycling on energy consumption and greenhouse gas emissions from electric vehicle production: The China 2025 case," Resources, Conservation & Recycling, Elsevier, vol. 122(C), pages 114-125.
    2. Gaustad, Gabrielle & Olivetti, Elsa & Kirchain, Randolph, 2012. "Improving aluminum recycling: A survey of sorting and impurity removal technologies," Resources, Conservation & Recycling, Elsevier, vol. 58(C), pages 79-87.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Pimenov, Danil Yu & Mia, Mozammel & Gupta, Munish K. & Machado, Álisson R. & Pintaude, Giuseppe & Unune, Deepak Rajendra & Khanna, Navneet & Khan, Aqib Mashood & Tomaz, Ítalo & Wojciechowski, Szymon &, 2022. "Resource saving by optimization and machining environments for sustainable manufacturing: A review and future prospects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 166(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hatayama, Hiroki & Daigo, Ichiro & Matsuno, Yasunari & Adachi, Yoshihiro, 2012. "Evolution of aluminum recycling initiated by the introduction of next-generation vehicles and scrap sorting technology," Resources, Conservation & Recycling, Elsevier, vol. 66(C), pages 8-14.
    2. Nguyen-Tien, Viet & Dai, Qiang & Harper, Gavin D.J. & Anderson, Paul A. & Elliott, Robert J.R., 2022. "Optimising the geospatial configuration of a future lithium ion battery recycling industry in the transition to electric vehicles and a circular economy," Applied Energy, Elsevier, vol. 321(C).
    3. Stotz, Philippe Maurice & Niero, Monia & Bey, Niki & Paraskevas, Dimos, 2017. "Environmental screening of novel technologies to increase material circularity: A case study on aluminium cans," Resources, Conservation & Recycling, Elsevier, vol. 127(C), pages 96-106.
    4. Peng, Tianduo & Ren, Lei & Ou, Xunmin, 2023. "Development and application of life-cycle energy consumption and carbon footprint analysis model for passenger vehicles in China," Energy, Elsevier, vol. 282(C).
    5. Julien Pedneault & Guillaume Majeau‐Bettez & Stefan Pauliuk & Manuele Margni, 2022. "Sector‐specific scenarios for future stocks and flows of aluminum: An analysis based on shared socioeconomic pathways," Journal of Industrial Ecology, Yale University, vol. 26(5), pages 1728-1746, October.
    6. Ciacci, Luca & Chen, Weiqiang & Passarini, Fabrizio & Eckelman, Matthew & Vassura, Ivano & Morselli, Luciano, 2013. "Historical evolution of anthropogenic aluminum stocks and flows in Italy," Resources, Conservation & Recycling, Elsevier, vol. 72(C), pages 1-8.
    7. Harper, Gavin D.J. & Kendrick, Emma & Anderson, Paul A. & Mrozik, Wojciech & Christensen, Paul & Lambert, Simon & Greenwood, David & Das, Prodip K. & Ahmeid, Mohamed & Milojevic, Zoran & Du, Wenjia & , 2023. "Roadmap for a sustainable circular economy in lithium-ion and future battery technologies," LSE Research Online Documents on Economics 118420, London School of Economics and Political Science, LSE Library.
    8. Millet, Dominique & Yvars, Pierre-Alain & Tonnelier, Pierre, 2012. "A method for identifying the worst recycling case: Application on a range of vehicles in the automotive sector," Resources, Conservation & Recycling, Elsevier, vol. 68(C), pages 1-13.
    9. Zahra Homayouni & Mir Saman Pishvaee & Hamed Jahani & Dmitry Ivanov, 2023. "A robust-heuristic optimization approach to a green supply chain design with consideration of assorted vehicle types and carbon policies under uncertainty," Annals of Operations Research, Springer, vol. 324(1), pages 395-435, May.
    10. Chen, Wei-Qiang & Shi, Lei, 2012. "Analysis of aluminum stocks and flows in mainland China from 1950 to 2009: Exploring the dynamics driving the rapid increase in China's aluminum production," Resources, Conservation & Recycling, Elsevier, vol. 65(C), pages 18-28.
    11. Julien Pedneault & Guillaume Majeau‐Bettez & Manuele Margni, 2023. "How much sorting is required for a circular low carbon aluminum economy?," Journal of Industrial Ecology, Yale University, vol. 27(3), pages 977-992, June.
    12. Wang, Jie & He, Ya-qun & Wang, Heng-guang & Wu, Ru-fei, 2023. "Low-carbon promotion of new energy vehicles: A quadrilateral evolutionary game," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    13. Sabaghi, Mahdi & Cai, Yongliang & Mascle, Christian & Baptiste, Pierre, 2015. "Sustainability assessment of dismantling strategies for end-of-life aircraft recycling," Resources, Conservation & Recycling, Elsevier, vol. 102(C), pages 163-169.
    14. Simic, Vladimir & Dimitrijevic, Branka, 2012. "Production planning for vehicle recycling factories in the EU legislative and global business environments," Resources, Conservation & Recycling, Elsevier, vol. 60(C), pages 78-88.
    15. Pauliuk, Stefan & Kondo, Yasushi & Nakamura, Shinichiro & Nakajima, Kenichi, 2017. "Regional distribution and losses of end-of-life steel throughout multiple product life cycles—Insights from the global multiregional MaTrace model," Resources, Conservation & Recycling, Elsevier, vol. 116(C), pages 84-93.
    16. Niero, Monia & Olsen, Stig Irving, 2016. "Circular economy: To be or not to be in a closed product loop? A Life Cycle Assessment of aluminium cans with inclusion of alloying elements," Resources, Conservation & Recycling, Elsevier, vol. 114(C), pages 18-31.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore:v:125:y:2017:i:c:p:37-47. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.