IDEAS home Printed from https://ideas.repec.org/a/eee/recore/v127y2017icp96-106.html
   My bibliography  Save this article

Environmental screening of novel technologies to increase material circularity: A case study on aluminium cans

Author

Listed:
  • Stotz, Philippe Maurice
  • Niero, Monia
  • Bey, Niki
  • Paraskevas, Dimos

Abstract

It is undisputed that the recycling of aluminium is desirable as long as the environmental and economic implications of its reintegration do not exceed the burdens of its primary production. The efficiency of any aluminium recycling system can be expressed by the total material losses throughout the entire process chain, ideally reaching 0%, thus equivalent to 100% metal recovery. However, in most cases metals are recycled in open/cascade recycling loop where dilution and quality losses occur. Innovations in aluminium beverage can (ABC) design as well as in sorting and recycling technologies have the potential to increase recyclability and avoid downcycling issues due to mixed alloy scrap streams. By means of Life Cycle Assessment (LCA) seven scenarios, comprising specific systemic changes, are compared to the current recycling practice of the used beverage can in the UK. The End-of-Life modelling of recycling is performed in accordance with the equal share method to account for impacts both on the recyclability and the recycled content. The results confirm the primary aluminium production and energy consumption in the ABC production as the hotspots in the life cycle of the ABC. The toxicity and energy-related impact categories show the highest susceptibility to increasing recycled content and recycling rate, while the technological novelties show little effect. In terms of abiotic resource depletion the introduction of novel technologies could have the potential to retain quality of the aluminium alloys by either establishing dedicated waste streams or upgrading the aluminium scrap by dedicated sorting strategies.

Suggested Citation

  • Stotz, Philippe Maurice & Niero, Monia & Bey, Niki & Paraskevas, Dimos, 2017. "Environmental screening of novel technologies to increase material circularity: A case study on aluminium cans," Resources, Conservation & Recycling, Elsevier, vol. 127(C), pages 96-106.
    • Handle: RePEc:eee:recore:v:127:y:2017:i:c:p:96-106
    DOI: 10.1016/j.resconrec.2017.07.013
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0921344917301921
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resconrec.2017.07.013?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Huysman, Sofie & De Schaepmeester, Jonas & Ragaert, Kim & Dewulf, Jo & De Meester, Steven, 2017. "Performance indicators for a circular economy: A case study on post-industrial plastic waste," Resources, Conservation & Recycling, Elsevier, vol. 120(C), pages 46-54.
    2. Brogaard, Line K. & Damgaard, Anders & Jensen, Morten B. & Barlaz, Morton & Christensen, Thomas H., 2014. "Evaluation of life cycle inventory data for recycling systems," Resources, Conservation & Recycling, Elsevier, vol. 87(C), pages 30-45.
    3. Monia Niero & Michael Z. Hauschild & Simon B. Hoffmeyer & Stig I. Olsen, 2017. "Combining Eco-Efficiency and Eco-Effectiveness for Continuous Loop Beverage Packaging Systems: Lessons from the Carlsberg Circular Community," Journal of Industrial Ecology, Yale University, vol. 21(3), pages 742-753, June.
    4. Gaustad, Gabrielle & Olivetti, Elsa & Kirchain, Randolph, 2012. "Improving aluminum recycling: A survey of sorting and impurity removal technologies," Resources, Conservation & Recycling, Elsevier, vol. 58(C), pages 79-87.
    5. Van Eygen, Emile & De Meester, Steven & Tran, Ha Phuong & Dewulf, Jo, 2016. "Resource savings by urban mining: The case of desktop and laptop computers in Belgium," Resources, Conservation & Recycling, Elsevier, vol. 107(C), pages 53-64.
    6. Allacker, K. & Mathieux, F. & Manfredi, S. & Pelletier, N. & De Camillis, C. & Ardente, F. & Pant, R., 2014. "Allocation solutions for secondary material production and end of life recovery: Proposals for product policy initiatives," Resources, Conservation & Recycling, Elsevier, vol. 88(C), pages 1-12.
    7. Shannon M. Lloyd & Robert Ries, 2007. "Characterizing, Propagating, and Analyzing Uncertainty in Life‐Cycle Assessment: A Survey of Quantitative Approaches," Journal of Industrial Ecology, Yale University, vol. 11(1), pages 161-179, January.
    8. Sevigné-Itoiz, Eva & Gasol, Carles M. & Rieradevall, Joan & Gabarrell, Xavier, 2014. "Environmental consequences of recycling aluminum old scrap in a global market," Resources, Conservation & Recycling, Elsevier, vol. 89(C), pages 94-103.
    9. Niero, Monia & Olsen, Stig Irving, 2016. "Circular economy: To be or not to be in a closed product loop? A Life Cycle Assessment of aluminium cans with inclusion of alloying elements," Resources, Conservation & Recycling, Elsevier, vol. 114(C), pages 18-31.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Christoph Helbig & Jonas Huether & Charlotte Joachimsthaler & Christian Lehmann & Simone Raatz & Andrea Thorenz & Martin Faulstich & Axel Tuma, 2022. "A terminology for downcycling," Journal of Industrial Ecology, Yale University, vol. 26(4), pages 1164-1174, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Niero, Monia & Olsen, Stig Irving, 2016. "Circular economy: To be or not to be in a closed product loop? A Life Cycle Assessment of aluminium cans with inclusion of alloying elements," Resources, Conservation & Recycling, Elsevier, vol. 114(C), pages 18-31.
    2. Turner, David A. & Williams, Ian D. & Kemp, Simon, 2015. "Greenhouse gas emission factors for recycling of source-segregated waste materials," Resources, Conservation & Recycling, Elsevier, vol. 105(PA), pages 186-197.
    3. Michael Martin & Sjoerd Herlaar & Aiden Jönsson & David Lazarevic, 2022. "From Circular to Linear? Assessing the Life Cycle Environmental and Economic Sustainability of Steel and Plastic Beer Kegs," Circular Economy and Sustainability,, Springer.
    4. Hatayama, Hiroki & Daigo, Ichiro & Matsuno, Yasunari & Adachi, Yoshihiro, 2012. "Evolution of aluminum recycling initiated by the introduction of next-generation vehicles and scrap sorting technology," Resources, Conservation & Recycling, Elsevier, vol. 66(C), pages 8-14.
    5. Christian Moretti & Blanca Corona & Robert Edwards & Martin Junginger & Alberto Moro & Matteo Rocco & Li Shen, 2020. "Reviewing ISO Compliant Multifunctionality Practices in Environmental Life Cycle Modeling," Energies, MDPI, vol. 13(14), pages 1-24, July.
    6. Rita Lopes & Rui Santos & Nuno Videira & Paula Antunes, 2021. "Co-creating a Vision and Roadmap for Circular Economy in the Food and Beverages Packaging Sector," Circular Economy and Sustainability,, Springer.
    7. Diyamandoglu, Vasil & Fortuna, Lorena M., 2015. "Deconstruction of wood-framed houses: Material recovery and environmental impact," Resources, Conservation & Recycling, Elsevier, vol. 100(C), pages 21-30.
    8. Stefano Cucurachi & Carlos Felipe Blanco & Bernhard Steubing & Reinout Heijungs, 2022. "Implementation of uncertainty analysis and moment‐independent global sensitivity analysis for full‐scale life cycle assessment models," Journal of Industrial Ecology, Yale University, vol. 26(2), pages 374-391, April.
    9. Marcos Ferasso & Tatiana Beliaeva & Sascha Kraus & Thomas Clauss & Domingo Ribeiro‐Soriano, 2020. "Circular economy business models: The state of research and avenues ahead," Business Strategy and the Environment, Wiley Blackwell, vol. 29(8), pages 3006-3024, December.
    10. Khounani, Zahra & Hosseinzadeh-Bandbafha, Homa & Nizami, Abdul-Sattar & Sulaiman, Alawi & Goli, Sayed Amir Hossein & Tavassoli-Kafrani, Elham & Ghaffari, Akram & Rajaeifar, Mohammad Ali & Kim, Ki-Hyun, 2020. "Unlocking the potential of walnut husk extract in the production of waste cooking oil-based biodiesel," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    11. Treyer, Karin & Bauer, Christian & Simons, Andrew, 2014. "Human health impacts in the life cycle of future European electricity generation," Energy Policy, Elsevier, vol. 74(S1), pages 31-44.
    12. Huysman, Sofie & Sala, Serenella & Mancini, Lucia & Ardente, Fulvio & Alvarenga, Rodrigo A.F. & De Meester, Steven & Mathieux, Fabrice & Dewulf, Jo, 2015. "Toward a systematized framework for resource efficiency indicators," Resources, Conservation & Recycling, Elsevier, vol. 95(C), pages 68-76.
    13. Georgios Lanaras-Mamounis & Anastasios Kipritsis & Thomas A. Tsalis & Konstantinos Ι. Vatalis & Ioannis E. Nikolaou, 2022. "A Framework for Assessing the Contribution of Firms to Circular Economy: a Triple-Level Approach," Circular Economy and Sustainability,, Springer.
    14. Lu, Yan & Xu, Zhenming, 2016. "Precious metals recovery from waste printed circuit boards: A review for current status and perspective," Resources, Conservation & Recycling, Elsevier, vol. 113(C), pages 28-39.
    15. Briac Baudais & Hamid Ben Ahmed & Gurvan Jodin & Nicolas Degrenne & Stéphane Lefebvre, 2023. "Life Cycle Assessment of a 150 kW Electronic Power Inverter," Energies, MDPI, vol. 16(5), pages 1-18, February.
    16. Rodrigo Barraza & Juan M. Sepúlveda & Ivan Derpich, 2022. "Location of the Intermediate Echelon to Add Purchase Value and Sustainability Criteria in a Mining Supply Network," Sustainability, MDPI, vol. 14(19), pages 1-14, October.
    17. Zhang, XiaoHong & Wei, Ye & Li, Min & Deng, ShiHuai & Wu, Jun & Zhang, YanZong & Xiao, Hong, 2014. "Emergy evaluation of an integrated livestock wastewater treatment system," Resources, Conservation & Recycling, Elsevier, vol. 92(C), pages 95-107.
    18. Pegoretti, Thaís dos Santos & Mathieux, Fabrice & Evrard, Damien & Brissaud, Daniel & Arruda, José Roberto de França, 2014. "Use of recycled natural fibres in industrial products: A comparative LCA case study on acoustic components in the Brazilian automotive sector," Resources, Conservation & Recycling, Elsevier, vol. 84(C), pages 1-14.
    19. Cambero, Claudia & Hans Alexandre, Mariane & Sowlati, Taraneh, 2015. "Life cycle greenhouse gas analysis of bioenergy generation alternatives using forest and wood residues in remote locations: A case study in British Columbia, Canada," Resources, Conservation & Recycling, Elsevier, vol. 105(PA), pages 59-72.
    20. Franziska Hesser & Daniela Groiß-Fürtner & Leona Woitsch & Claudia Mair-Bauernfeind, 2023. "Ex-Ante Eco-Efficiency Assessment of Dendromass Production: Conception and Experiences of an Innovation Project," Land, MDPI, vol. 12(4), pages 1-16, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore:v:127:y:2017:i:c:p:96-106. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.